0% found this document useful (0 votes)
237 views1 page

SE - GP - 104 GPS and GSM Based Office Cab Monitoring, Alerting and Logging System

This document describes a GPS and GSM based system to monitor and track office cabs. The system uses GPS to detect the current location of the vehicle through latitude and longitude and sends this data to a remote server via GSM network. It also uses a card reader and panic switch to identify employees and send alerts. The main goal is to allow effective remote monitoring and control of the cab's location and status through a web interface using GPS and GSM technology.

Uploaded by

Chirag Dave
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
237 views1 page

SE - GP - 104 GPS and GSM Based Office Cab Monitoring, Alerting and Logging System

This document describes a GPS and GSM based system to monitor and track office cabs. The system uses GPS to detect the current location of the vehicle through latitude and longitude and sends this data to a remote server via GSM network. It also uses a card reader and panic switch to identify employees and send alerts. The main goal is to allow effective remote monitoring and control of the cab's location and status through a web interface using GPS and GSM technology.

Uploaded by

Chirag Dave
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

ABSTRACT

GPS and GSM Based Office Cab Monitoring, Alerting &


Logging System

Employee security becomes major concern for employers while their employees
are on move for their office works. GPS and GSM based vehicle tracking
System with panic alerts and employee identification implements the emerging
applications of the GSM technology. Using GSM networks online cab tracking
system has been proposed that will act as an embedded system which can
monitor and control cab locally using built!in input and output peripherals.
"emotely the system allows the user to effectively monitor and control the cab
on web through GP"S service from GSM network service provider. #t will
achieve by receiving location and alert data on server and receiving control
command data from server over GP"S service.
$he main concept behind the project is to detecting current location of vehicle
using latitude and longitude received from GPS and sends it to remote location
on web server through GSM using GP"S service. "eceiving command data
from remote server on GP"S and processing it further as re%uired to perform
desire action. $he type of the operation to be performed depends on the nature
of the command sent. "& #' card reader also interfaced with system to identify
the employee travelling on cab which has also interface of panic switch which
send panic alert to remote server over GP"S when switch is pressed.
(e have selected a particular GSM modem for our project. $he messages are
sent from the GSM Modem that contains commands in written form which are
then processed accordingly to perform the re%uired task. ) microcontroller
based system has been proposed for our project. $here are several terminologies
that are used e*tensively throughout this project report.
GSM +Global System for Mobile ,ommunications-. #t is a cellular
communication standard. SMS +Short Message Service-. #t is a service available
on most digital mobile phones that permit the sending of short messages +also
known as te*t messaging service-. GP"S+General packet radio service- is use to
send data to remote server. GPS+Global Positioning System- will gives correct
latitude and longitude for current location which it receives from satellites.

You might also like