Scribd
Upload
38 views

Ratings IEC UL: Rail Mounted Terminal Blocks: Polyamide Range of Terminals: Feed Through Terminal: KUT 10

The document summarizes the specifications of the Elmex KUT 10 rail mounted terminal block, including: 1. It has a polyamide insulating material, 10mm terminal pitch, and accommodates wire sizes from 1.5-10mm. 2. It has a rated voltage of 800V, current of 57A, and can be used with solid or stranded wires within its conductor size range. 3. Various accessories are listed such as end plates, partition plates, protection covers, end clamps, and shorting links that can be used with the terminal block.

Uploaded by

Delhibabu Govind
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
38 views

Ratings IEC UL: Rail Mounted Terminal Blocks: Polyamide Range of Terminals: Feed Through Terminal: KUT 10

The document summarizes the specifications of the Elmex KUT 10 rail mounted terminal block, including: 1. It has a polyamide insulating material, 10mm terminal pitch, and accommodates wire sizes from 1.5-10mm. 2. It has a rated voltage of 800V, current of 57A, and can be used with solid or stranded wires within its conductor size range. 3. Various accessories are listed such as end plates, partition plates, protection covers, end clamps, and shorting links that can be used with the terminal block.

Uploaded by

Delhibabu Govind
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

ELMEX CONTROLS PVT. LTD.

ELMEX ELECTRIC PVT. LTD.


Rail Mounted Terminal Blocks : Polyamide Range Of Terminals : Feed Through Terminal : KUT 10
Type of Connection MS Screw Clamp
Insulating Material Polyamide 66
Terminal Pitch 10 mm ( 0.39 Inch)
Terminal Width 42.5 mm ( 1.66 Inch)
Terminal Height 46.4 mm ( 1.81 Inch)
Rated Cross Section 10 sq mm
Wire Stripping Length 12 mm
Screw Size M4
Connection Possibility
Stranded wire Max : 10 sq mm Min : 1.5 sq mm
Solid wire Max : 16 sq mm Min : 1.5 sq mm
Ratings IEC UL
Voltage 800 V 600 V
Current 57 A 65 A
Conductor Size 10 sq mm Min : 16 AWG Max : 6 AWG
Tightening Torque 1.2 Nm 14 LbIn
Terminal Accessories
End Plate KPX
Partition Plate Without Foot KBX
Partition Plate With Foot KBXF
Protection Cover PCK3
End Clamp SCUN, SCUSL, SCUDD, SCKN, DCKN
Cross Connection Link Assembly CCLA10 - 2W
Comb-type Shorting Link SLC10N - 2W
Link for Removable Shorting RSL10
Long Stud For Removable Shorting LSR10-16
Marking Label LABEL KN10
Warning Label WARNING LABEL WL10
Group Marking Carrier SCKNMLH, SCUNMLH, DCKNMLH
Terminal Colours GREY, KHAKHI, RED, YELLOW, BLUE, BLACK, GREEN
Mounting Channel CHS10, CHK10, CHS3, CHS5, CHK5, CHK3, CHKS3, CHKS5, CHKS10, CHKDS10, CHKD10
* Technical specifications may change in line with technical advances and industry standards.

You might also like