Scribd
Upload
236 views1 page

Reliance Industries Limited: RELENE F 46003 Blow Moulding / Blown Film Grade

Relene F 46003 is a high density polyethylene grade suitable for blow moulding and blown film applications. It exhibits moderate to good stiffness and offers good melt strength, environmental stress crack resistance, and impact resistance. The resin can be used to produce blown film and is recommended for carry bags and co-extruded film structures. It meets Indian standards for polyethylene in contact with food and complies with FDA regulations.

Uploaded by

Md Minhaj
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
236 views1 page

Reliance Industries Limited: RELENE F 46003 Blow Moulding / Blown Film Grade

Relene F 46003 is a high density polyethylene grade suitable for blow moulding and blown film applications. It exhibits moderate to good stiffness and offers good melt strength, environmental stress crack resistance, and impact resistance. The resin can be used to produce blown film and is recommended for carry bags and co-extruded film structures. It meets Indian standards for polyethylene in contact with food and complies with FDA regulations.

Uploaded by

Md Minhaj
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

RELIANCE INDUSTRIES LIMITED HIGH DENSITY POLYETHYLENE

RELENE F 46003 BLOW MOULDING / BLOWN FILM GRADE



Relene F 46003 is a High Density Polyethylene grade suitable for general purpose extrusion blow
moulding applications. Articles blown from this grade exhibit moderate to good stiffness. The resin
offers good melt strength, ESCR and impact resistance. It is also used for producing blown film and is
recommended for use in carry bags and co-extruded film structures.

Physical Characteristics :
Property Unit Test Method Value
Density g/cc ASTM D 1505 0.946
MFI (2.16 kg) g/10 min ASTM D 1238 0.30


Typical Properties :
Property Unit Test Method Value
Tensile Strength at Yield MPa ASTM D 638 25

Elongation at break % ASTM D 638 510

Flexural Yield Strength MPa ASTM D 790 29

Flexural Modulus MPa ASTM D 790 700

Hardness Shore D ASTM D 2240 69

Vicat Softening Point C ASTM D 1525 128

ESCR : T
50
(10% Igepol) Hrs ASTM D 1693 > 140


PE 0901

*

Typical values with injection moulded specimens, not to be taken as specification
HDPE grade Relene F 46003 meets the requirements stipulated in standard IS:10146-1982 on Specifications for
Polyethylene for its safe use in contact with foodstuffs, pharmaceuticals and drinking water. It also conforms to the
positive list of constituents as prescribed in IS:10141-1982. The grade and the additives incorporated in it also comply
ith the FDA:CFR Title 21, 177.1520, olefin Polymer. w

The information and data presented herein is true and accurate to the best of our knowledge. Now warranty or guarantee
expressed or implied, is made regarding performance or otherwise. This information and data may not be considered as a
suggestion to use our products without taking into account existing patents, or legal provisions or regulations, whether
ational or local. n

The user of any information and/or data is advised to obtain the latest details from any of the offices of the company or its
authorized agent, as the information and/or data is subject to change based on the research and development work
undertaken by the company.
RELENE/RELCAIR
TM
is the trade name of Polyethylene from Reliance Industries Limited.

You might also like