Scribd
Upload
32 views1 page

Wilcoxon Research Model 787T General Purpose Accelerometer With Internal Temperature Sensor

The Wilcoxon Research model 787T is a general purpose accelerometer and temperature sensor with the following key features: - It measures both acceleration and temperature. - It has a rugged, corrosion resistant and hermetically sealed design with ESD protection and reverse wiring protection. - It has a sensitivity of 100 mV/g for acceleration measurement and 10 mV/°C for temperature, with measurement ranges of 80g peak and 2-120°C respectively.

Uploaded by

Dibonito
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
32 views1 page

Wilcoxon Research Model 787T General Purpose Accelerometer With Internal Temperature Sensor

The Wilcoxon Research model 787T is a general purpose accelerometer and temperature sensor with the following key features: - It measures both acceleration and temperature. - It has a rugged, corrosion resistant and hermetically sealed design with ESD protection and reverse wiring protection. - It has a sensitivity of 100 mV/g for acceleration measurement and 10 mV/°C for temperature, with measurement ranges of 80g peak and 2-120°C respectively.

Uploaded by

Dibonito
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Wilcoxon Research model 787T

General purpose accelerometer with


internal temperature sensor
Dynamic

Features
Measures both acceleration and
temperature
Rugged design
Corrosion resistant
Hermetic seal
Case isolated
ESD protection
Reverse wiring protection
3

Sensitivity, 5%, 25 C
Acceleration range, VDC >25V
Amplitude nonlinearity
Frequency response:

5%

10%

3 dB
Resonance frequency
Transverse sensitivity, max
Temperature response:

25 C

+120 C

100 mV/g
80 g peak
1%
1 - 5,000 Hz
0.7 - 10,000 Hz
0.5 - 12,000 Hz
22 kHz
5% of axial
10%
+10%

Temperature sensor

Output sensitivity 10 mV/C


Measurement range 2 to 120 C

Electrical

Power requirement:

Voltage source1

Current regulating diode1,2
Electrical noise, equiv. g:

Broadband
2.5 Hz to 25 kHz

Spectral
10 Hz

100 Hz

1000 Hz
Output impedance, max.
Bias output voltage, nominal.
Grounding

Environmental





Temperature range
Vibration limit
Shock limit
Electromagnetic sensitivity, equiv. g, max .
Sealing
Base strain sensitivity, max.

Physical

Connections

18 - 30 VDC
2 - 10 mA
700 g
10 g/Hz
5 g/Hz
5 g/Hz
100
12 VDC
case isolated, internally
shielded
50 to 120 C
500 g peak
5,000 g peak
70 g/gauss
hermetic
0.002 g/strain

Sensing element design


Weight
Case material
Mounting

PZT, shear
145 g
316L stainless steel
1/4-28 captive screw with
0.046 dia safety wire hold
Output connector 3 pin, MIL-C-5015 style
Mating connector 3 socket, MIL-C-5015 style
Recommended cabling 3 conductor, shielded
Function

ground
accelerometer power / signal
accelerometer and temperature sensor common
temperature sensor signal

Connector pin
shell
A
B
C

Accessories supplied: 1/4-28 captive screw; optional M6 captive



screw
Notes: 1 To minimize the possibility of signal distortion during

high vibration signals, 24 to 28 VDC powering is

recommended. The higher level constant current

source should be used when driving long cables

(please consult the manufacturer).
2

A maximum current of 6 mA is recommended for

operating temperatures in excess of 100 C.

Due to continued research and product development, Meggitt Sensing Systems reserves the right to amend this specification without notice.
Cleared for public release.

Meggitt Sensing Systems


20511 Seneca Meadows Parkway
Germantown MD 20876
USA
Tel: 301 330 8811
Fax: 301 330 8873
Email: [email protected]
www.wilcoxon.com
www.meggitt.com

99101

Rev.A.1 8/11

You might also like