Scribd
Upload
465 views

Vol 1

This document provides details on the project particulars for an L23/30 engine. It lists the plate numbers, part numbers, and editions for the turbocharger system, control and safety system, starting system, lubricating oil system, fuel oil system, and cooling water system. It also lists the available manuals for auxiliary equipment, including the turbocharger, charge air cooler, governor, remote sensors, and special equipment.

Uploaded by

silahgan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
465 views

Vol 1

This document provides details on the project particulars for an L23/30 engine. It lists the plate numbers, part numbers, and editions for the turbocharger system, control and safety system, starting system, lubricating oil system, fuel oil system, and cooling water system. It also lists the available manuals for auxiliary equipment, including the turbocharger, charge air cooler, governor, remote sensors, and special equipment.

Uploaded by

silahgan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 399

Page 1 (2)

Project Particulars

L23/30
: Applied
: Not applied

Turbocharger system (Plate no. 309)


309-1. Cleaning device for T/C (compressor side)
a) Hand injector (for 5,6L23/30) --------------------------------------------- 309.25 Ed.03H
b) Container (for 7,8L23/30) ------------------------------------------------- 512-05.00 Ed.01H
309-2. Charge air cooler with W.M.C (for fresh water)
a) for 5,6L23/30 ----------------------------------------------------------------- 51201-04E
b) for 7,8L23/30 ----------------------------------------------------------------- 51201-05E
309-3. Charge air cooler with W.M.C (for sea water)
a) for 5,6L23/30 ----------------------------------------------------------------- 51201-06E
b) for 7,8L23/30 ----------------------------------------------------------------- 51201-07E
309-4. Turbocharger system
a) for 5,6L23/30 ----------------------------------------------------------------- 30901-16E
b) for 7,8L23/30 ----------------------------------------------------------------- 30901-14E
309-5. Exhaust pipe arrangement
a) for 5,6L23/30 ----------------------------------------------------------------- 30902-13E
b) for 7,8L23/30 ----------------------------------------------------------------- 30902-14E
Control and safety system (Plate no. 313)
313-1. Remote sensors list
a) Danfoss made --------------------------------------------------------------- 31308-02E
b) Trafag made ------------------------------------------------------------------ 31308-02E1
Starting system (Plate no. 314)
314-1. Pressure reduction valve ----------------------------------------------- 51322-01E
Lubricating oil system (Plate no. 315)
315-1. Centrifugal by-pass filter ------------------------------------------------ 515.15 Ed.01H
515-15.00 Ed.01E
51515-01H
315-2. Prelubricating oil pump
a) Rickmeier made ------------------------------------------------------------- 515-01.05 Ed.06H
51504-02H
b) IMO made --------------------------------------------------------------------- 515-01.05 Ed.02E
51504-01H
315-3. Lub. oil hand wing pump ------------------------------------------------ 51525-01H
Fuel oil system (Plate no. 316)
316-1. Fuel oil feed pump -------------------------------------------------------- 31601-10H
Cooling water system (Plate no. 317)
317-1. Cooling water thermostatic valve
a) Wax type ---------------------------------------------------------------------- 516.04 Ed.01H
516-04.00 Ed.01H
51604-01H
b) Pneumatic type (* refer to separate manual)
317-2. Pre-heater for fresh water ---------------------------------------------- 51635-01E

----------------------- HHI/ENGINE AND MACHINERY DIVISION -----------------------

Page 2 (2)

Project Particulars

L23/30

Manual for auxiliary equipments (Part II)

1. Manual for turbocharger


a) NR15/R (for 5,6L23/30)
b) NR20/R (for 7,8L23/30)

2. Manual for Charge Air Cooler

3. Manual for governor


a) Hydraulic type (UG8D)
b) Electric type

4. Manual for remote sensors


a) Press.sensor,Temp.switch
b) Temp.sensor (Resistance bulb)

Danfoss made
Daeyang made
Heriana made

Trafag made
C.M.R. made

5. Manual for special equipments


1) Resilient mounting
a) Rubber Design BV
b) Loggers
2) Flexible coupling
3) Torsional vibration damper
4) Oil mist detector
Graviner MK-6
Schaller VN-115
5) Emergency MDO pump unit
6) Jacket water pre-heating unit
7) Cooling water thermostatic valve (Pneumatic type)
8) L.O.auto back-flushing filter

----------------------- HHI/ENGINE AND MACHINERY DIVISION -----------------------

You might also like