Congratulations, you and your Mac Pro

were made for each other.

www.apple.com/macosx
Mac Help time machine
Time Machine
Automatically back
up your files to an
extra hard drive.
Spaces
Arrange windows in
different spaces to
unclutter your desktop.
www.apple.com/macosx
Mac Help spaces
Finder
Browse the contents
of your computer
using Cover Flow.
www.apple.com/macosx
Mac Help finder
www.apple.com/macosx
Mac Help .mac
Back to My Mac
Access files on your Mac
at home via the Internet
from anywhere.
GarageBand
Create music by adding
musicians to a virtual stage.
Enhance your song to sound
like a pro.
www.apple.com/ilife/garageband
GarageBand Help record
iPhoto Help photo
www.apple.com/ilife/iphoto
iWeb
Create beautiful websites
with photos, movies, blogs,
podcasts, and dynamic
web widgets.
www.apple.com/ilife/iweb
iWeb Help website
iPhoto
Organize all your photos
with Events. Publish to a
Web Gallery with a click.
iMovie
Collect all your video in
one library. Create and
share movies in minutes.
iMovie Help movie
www.apple.com/ilife/imovie

Contents

5

Contents

Chapter 1: Ready, Set Up, Go

11

Setting Up Your Mac Pro

19

Putting Your Mac Pro to Sleep or Shutting It Down

Chapter 2: Life with Your Mac Pro

24

Basic Features on the Front of Your Mac Pro

26

Features of Your Apple Keyboard

28

Ports and Connectors on the Back of Your Mac Pro

30

More Ports and Connectors on the Back

32

Internal Expansion Options

34

Getting Answers

Chapter 3: Making a Good Thing Better

39

Opening the Mac Pro

43

Installing Memory

51

Installing Internal Storage Devices

60

Adding PCI Express Cards

64

Replacing the Internal Backup Battery

6

Contents

Chapter 4: Problem, Meet Solution

68

Problems with Your Mac Pro

70

Problems with Software

71

Keeping Your Software Up to Date

72

Problems with AirPort Wireless Communication

72

Problems with Your Display

75

Problems with Your Internet Connection

78

Using Apple Hardware Test

79

Reinstalling the Software That Came with Your Computer

80

Maximizing Ethernet Performance

81

Learning More, Service, and Support

83

Locating Your Serial Number

Chapter 5: Whats Under the Hood

86

Specifications

Chapter 6: Last, but Not Least

96

Important Safety Information

97

General Maintenance

100

Understanding Ergonomics

102

Avoid Hearing Damage

102

Apple and the Environment

103

Regulatory Compliance Information

Contents

7

Looking for Something?

110

Index

1

1

Ready, Set Up, Go
www.apple.com/macpro
Mac Help Migration Assistant



10 Chapter 1

Ready, Set Up, Go

Your Mac Pro features the latest computer technology, including advanced 64-bit
multicore processor technology, high-speed FB-DIMM memory, PCI Express graphics
and expansion slots, and internal storage, all in an anodized aluminum chassis with
easy access to internal components.

Important:

Read all the installation instructions (and the safety information starting on
page 95) carefully before you first use your Mac Pro.
Before you begin, remove any protective film from the outside of your Mac Pro and
from the inside of the side panel. For information about opening the side panel, see
Opening the Mac Pro on page 39.
Make sure you look over the information in Chapter 2, Life with Your Mac Pro, to find
out about the new features of this Mac Pro.
Many answers to questions can be found on your Mac Pro in Mac Help. For information
about Mac Help, see Getting Answers on page 34.
Apple may release new versions and updates to its system software, so the images
shown in this book may be slightly different from what you see onscreen.



Chapter 1

Ready, Set Up, Go

11

Setting Up Your Mac Pro

Your Mac Pro is designed so that you can set it up quickly and start using it right away.
Follow the steps on the next few pages to get started.

Step 1: Position your Mac Pro and display

Pick up your Mac Pro by both of its handles using correct lifting techniques. If your
display is heavy, use correct lifting techniques when positioning it as well. Position your
Mac Pro and display so that:

They are each on a sturdy, flat surface

The power cable connectors dont press against a wall or other object

The airflow in front of, behind, and below your Mac Pro and the display is not
obstructed

The computers optical drive trays have space to open in front
The only way to shut off power completely to your Mac Pro and display is to
disconnect their power plugs from the power source. Make sure the power cords for
your Mac Pro and display are within easy reach so that you can unplug them.



12 Chapter 1

Ready, Set Up, Go

Step 2: Plug in the power cord

Plug the power cord completely into the recessed power cord socket on the back
of your Mac Pro and plug the other end into a grounded outlet or a grounded
power strip.
Power cord socket
Power cord plug



Chapter 1

Ready, Set Up, Go

13

Step 3: Connect the display

Connect your display as shown in the illustration below. Depending on the display,
you may have one or more cables to connect. Check the instructions that came with
the display for additional setup information.
You can connect two displays with Digital Visual Interface (DVI) connectors to the
display ports on the back of your Mac Pro.
USB port
FireWire 400 port
Display cable
Display ports



14 Chapter 1

Ready, Set Up, Go

You can connect an Apple Cinema Display to either port.
You can also connect displays that have an Apple Display Connector (ADC) or a video
graphics array (VGA) connector using one of the following adapters:

To connect a VGA display, use the Apple DVI to VGA Display Adapter included with
your Mac Pro to connect the display to the DVI port.

To connect an ADC display, use an Apple DVI to ADC Display Adapter, not included,
to connect the display to the DVI port.
To purchase an Apple DVI to ADC Display Adapter, contact an Apple Authorized
Reseller, visit an Apple Store retail location, or go online to the Apple Store at
www.apple.com/store.
DVI display ports
DVI to VGA
Display
Adapter
VGA connector
on display cable
DVI display
port



Chapter 1

Ready, Set Up, Go

15

Step 4: Connect an Ethernet cable

To access the Internet or a network, connect one end of an Ethernet cable to either of
the gigabit Ethernet ports on the back of your Mac Pro. Connect the other end to a
DSL modem, cable modem, or Ethernet network.
Gigabit Ethernet ports



16 Chapter 1

Ready, Set Up, Go

Step 5: Connect the keyboard and mouse

Connect the keyboard cable to one of the USB (d

) ports on your Mac Pro or on the
display. Plug the Mighty Mouse cable into a USB port on the keyboard.
Mouse Keyboard
Plug the mouse into a
USB port on the keyboard



Chapter 1

Ready, Set Up, Go

17

If the keyboard cable isnt long enough, use the keyboard extension cable that came
with your Mac Pro.

Using a Wireless Keyboard and Mouse

If you purchased an Apple Wireless Keyboard and Mouse with your Mac Pro, follow the
instructions that came with the keyboard and mouse to set them up.

Step 6: Turn on your Mac Pro

Press the power (

) button on the front of your Mac Pro to turn it on. If your display
must be turned on separately, turn it on by pressing its power button.

Step 7: Use Setup Assistant

The first time you turn on your Mac Pro, Setup Assistant starts. Setup Assistant helps
you enter your Internet and email information and set up a user account on your
Mac Pro. If you already have a Mac, Setup Assistant can help you automatically transfer
files, applications, and other information from your previous Mac to your new Mac Pro.

Step 8: Customize Your Desktop and Set Your Preferences

You can quickly make your desktop look the way you want using System Preferences.
Choose Apple (

) > System Preferences from the menu bar. As you get to know your
Mac Pro, explore System Preferencesits your command center for most computer
and display settings. For more information, open Mac Help and search for System
Preferences or for the specific preference you want to change.
Apple keyboard extension cable



18 Chapter 1

Ready, Set Up, Go

Need Help Setting Up?

If you dont see anything on your screen or you think your Mac Pro didnt start up
properly, check the following:

Is your Mac Pro plugged into a power source? If its plugged into a power strip, is the
power strip turned on?

Is the power cord securely plugged into the back of your Mac Pro?

Are the keyboard and display cables connected correctly?

Is the display turned on? Are the brightness and contrast of the display adjusted
correctly? If the display has brightness controls, adjust them.

If you still dont see anything on your screen, restart your Mac Pro. Press and hold the
power (

) button on your Mac Pro for 5 or 6 seconds, until it turns off. Press the
power (

) button again to restart.

If you see a blinking question mark on the screen or a series of flashes from the
status light, see Chapter 4, Problem, Meet Solution, on page 67.



Chapter 1

Ready, Set Up, Go

19

Putting Your Mac Pro to Sleep or Shutting It Down

When you finish working, you can put your Mac Pro to sleep or shut it down.

Putting Your Mac Pro to Sleep

If you will be away from your Mac Pro for only a short time, put it to sleep. When your
Mac Pro is in sleep, the displays screen is dark. You can quickly wake your Mac Pro from
sleep and bypass the startup process.

To put your Mac Pro to sleep, do one of the following:

Choose Apple (

) > Sleep.

Press the power (

) button on the front of your Mac Pro and click Sleep in the
dialogue box that appears.

Choose Apple (

) > System Preferences, click Energy Saver, and set a sleep timer.

To wake your Mac Pro from sleep, do one of the following:

Press any key on the keyboard.

Click the mouse.

Press the power (

) button on the front of your Mac Pro.



20 Chapter 1

Ready, Set Up, Go

Shutting Down Your Mac Pro

If you will not be using your Mac Pro for a day or more, you should turn it off.

To turn off your Mac Pro, do one of the following:

Choose Apple (

) > Shut Down.

Press the power (

) button on the front of your Mac Pro and click Shut Down in the
dialogue box that appears.

NOTICE:

Do not turn off your Mac Pro by turning off the switch on a power strip or
by pulling out your Mac Pros power plug (unless you cant turn off your Mac Pro any
other way). Your files or system software could be damaged if your Mac Pro is not
shut down properly.

NOTICE:

Shut down your Mac Pro before moving it. Moving your computer while the
hard disk is spinning can damage the hard disk, causing loss of data or the inability to
start up from the hard disk.

2

2

Life with Your Mac Pro
www.apple.com/macpro
Mac Help ports



Chapter 2

Life with Your Mac Pro

23

Read on for an overview of the features and ports of your Mac Pro.
The Apple website at www.apple.com links you to the latest Apple news, free
downloads, and online catalogs of software and hardware for your Mac Pro.
You can also find the manuals for many Apple products, and technical support for all of
Apples products, on the Apple Support website at www.apple.com/support.



24 Chapter 2

Life with Your Mac Pro

Basic Features on the Front of Your Mac Pro
Optical drive
Headphone jack
Status light
f
Power button
FireWire 400 port FireWire 800 port
Second optical drive
(optional)
USB 2.0 ports (2)

Chapter 2 Life with Your Mac Pro 25
Optical drive
Your Mac Pro has a DVD+R DL/DVDRW/CD-RW SuperDrive, which can read CD-ROM,
photo CD, audio, and DVD discs. It can write music, documents, and other files to CD-R,
CD-RW, DVDR, DVDRW, and DVD+R Double Layer (DL) discs. To open the drive, press
the Media Eject (C) key on your Apple Keyboard. If your Mac Pro has a second optical
drive, press the Option and Media Eject (C) keys to open it.

Power button
Press this button to turn on your Mac Pro, put it to sleep, or wake it from sleep. To restart,
press and hold this button for 5 or 6 seconds until your Mac Pro turns off, and, then press
it again to turn it on.
H
FireWire 400 and 800 ports
Connect your Mac Pro to FireWire digital video (DV) cameras, scanners, and external hard
disk drives. Connect and disconnect FireWire devices without restarting. The FireWire 400
port supports data rates up to 400 megabits per second (Mbit/s). The FireWire 800 port
supports data rates up to 800 Mbit/s.
d
USB 2.0 ports
Connect your Mac Pro to USB keyboards, mice, printers, scanners, iPods, speakers,
microphones, and hubs. Your display may also have USB ports.
f
Headphone jack
Connect headphones to your Mac Pro through the headphone minijack.
Status light
A white light indicates your Mac Pro is on; a pulsing light indicates its in sleep.

26 Chapter 2 Life with Your Mac Pro
Features of Your Apple Keyboard
Escape
Decrease brightness
Increase brightness
Expos
Dashboard
Caps Lock
Fast Forward
Mute
Volume Down
Volume Up
Media Eject
Function
Play/Pause
Rewind
USB port
(both sides)

Chapter 2 Life with Your Mac Pro 27
Escape (esc) key
Press the Escape (esc) and Command (x) keys simultaneously to open Front Row.
Press the Escape (esc) key to exit Front Row.
Brightness keys (F1, F2)
Increase ( ) or decrease ( ) the brightness of your Apple display.
Expos All Windows key (F3)
Open Expos for quick access to all your open windows.
Dashboard key (F4)
Open Dashboard to access your widgets.

Mute key (F10)

Mute the sound coming from the built-in speakers and headphone port.
-
Volume keys (F11, F12)
Decrease () or increase (-) the volume of sound coming from the speakers or
headphone port on your Mac Pro.
C
Media Eject key
Press and hold the Media Eject (C) key to remove a disc.
Function (fn) key
Hold down to activate customized actions assigned to the function keys (F1 to F19).
To learn about customizing function keys, choose Help > Mac Help from the menu bar
and search for function keys.

Media keys (F7, F8, F9)

Fast-forward (), play or pause (), or rewind (]) a song, movie, or slideshow.
Caps Lock key
Press the Caps Lock key to engage caps lock so you can type capital letters.
d
Two USB 2.0 ports
Connect a mouse and sync your iPhone, iPod, or digital camera.

28 Chapter 2 Life with Your Mac Pro
Ports and Connectors on the Back of Your Mac Pro
Power socket
Locking latch
USB 2.0 ports (3)
FireWire 400 port
G
d

H
FireWire 800 port H
Gigabit Ethernet
ports (2)

Chapter 2 Life with Your Mac Pro 29
Power socket
Connect the power cord that came with your Mac Pro. Dont use ordinary power or
extension cords.

Locking latch
Lift the latch to open the side panel and access the internal components in your
Mac Pro. If you are working inside your Mac Pro and the latch is down, the optical and
hard drives are locked in place. You can attach a security lock to the latch to prevent
access and secure the internal components. You can also attach a security cable to the
latch or through the handles and feet to protect your Mac Pro.
d
USB 2.0 ports
Connect your Mac Pro to USB devices, such as keyboards, mice, printers, scanners,
speakers, USB microphones, and USB hubs. Your display may also have USB ports.
H
FireWire 400 and 800 ports
The FireWire 400 port supports data rates up to 400 Mbit/s. The FireWire 800 port
supports data rates up to 800 Mbit/s.
G
Dual Gigabit Ethernet ports with jumbo frame support
Connect your Mac Pro to a high-speed Ethernet network to access the Internet or
network resources such as printers and servers, and share information over the network
using a CAT 5e cable.

30 Chapter 2 Life with Your Mac Pro
More Ports and Connectors on the Back
PCI Express
expansion slots
DVI display port 1
-
,
Optical digital
audio out port
Audio line-in port
Audio line-out port
Optical digital
audio in port
DVI display port 2

Chapter 2 Life with Your Mac Pro 31
PCI Express expansion slots (3)
Expand your Mac Pro by installing up to three Peripheral Component Interconnect (PCI)
Express cards in the covered slots labeled 2, 3, and 4.

DVI display ports

Connect displays that use a Digital Visual Interface (DVI) connector to the DVI display
ports. Connect an Apple display, such as the 20-, 23-, or 30-inch Apple Cinema Display,
to either port. You can also connect displays that use a video graphics array (VGA)
connector using the Apple DVI to VGA Display Adapter that came with your Mac Pro.
Optical digital audio in and audio out ports
Connect to decks, receivers, digital instruments, and 5.1 surround-sound speaker systems
using standard TOSLINK cables or fiber-optic cables with a 3.5 mm plastic or nylon
optical plug. You can transfer stereo or encoded 5.1 audio using the S/PDIF (Sony/Philips
Digital Interface) protocol and TOSLINK cables.
,
Analog audio line-in port
Connect self-powered microphones, MP3 and CD players, and other devices with analog
capability.
-
Analog audio line-out port
Connect self-powered analog speakers and other devices with analog capability.

32 Chapter 2 Life with Your Mac Pro
Internal Expansion Options
Hard disk drive
carriers (4)
Optical drive carrier
Slot 1: Double-wide
PCI Express graphics
(graphics card installed)
Top memory card
Bottom memory card
Slots 24: PCI Express
Battery

Chapter 2 Life with Your Mac Pro 33
Optical drives
Your Mac Pro comes with one or two DVD+R DL/DVDRW/CD-RW SuperDrives in the
optical drive carrier. To replace an optical drive, see Replacing the Optical Drive on
page 55.
Hard disk drive
Your Mac Pro comes with up to four hard disk drives installed in the drive carriers.
To install or replace the hard disk drives, see Installing Internal Storage Devices on
page 51.
PCI Express slots
Your Mac Pro has three PCI Express expansion slots. To install PCI cards in slots 2 through
4 to expand the capabilities of your Mac Pro, see Adding PCI Express Cards on page 60.
Battery
Your Mac Pro uses an internal backup battery. If your Mac Pro has trouble starting up,
or if the system date and time are frequently incorrect, you may need to replace the
battery. See Replacing the Internal Backup Battery on page 64.
Double-wide PCI Express graphics slot
Connect up to two displays to the graphics card in the PCI Express graphics slot (slot 1).
You can replace the card in this slot and install additional graphics cards in PCI slots 2
through 4. See Adding PCI Express Cards on page 60.
Memory cards
Your Mac Pro has two memory cards. Each card holds up to four FB-DIMMs, for a total of
eight DIMMs. To add more memory, install 800 MHz FB-DIMMs in matched pairs on the
memory cards. See Installing Memory on page 43 for information about the specific
type of memory used in Mac Pro.

34 Chapter 2 Life with Your Mac Pro
Getting Answers
Much more information about using your Mac Pro is available in Mac Help and on the
Internet at www.apple.com/support/macpro.
To open Mac Help:
1 Click the Finder icon in the Dock (the bar of icons along the edge of the screen).
2 Click the Help menu in the menu bar and type a question or term in the Search field.
3 Choose a topic from the list or choose Show All Results to see all of the topics.
More Information
For more information about using your Mac Pro, see the following:
To learn about See
Installing additional drives,
memory, expansion cards,
or changing the battery
Chapter 3, Making a Good Thing Better, on page 37.
Troubleshooting your Mac Pro
if you have a problem
Chapter 4, Problem, Meet Solution, on page 67.
Finding service and support
for your Mac Pro
Learning More, Service, and Support on page 81. Or the
Mac Pro Support website at www.apple.com/support/macpro.
Using Mac OS X The Mac OS X website at www.apple.com/macosx. Or search
for Mac OS X in Mac Help.
Moving from a PC to a Mac How to move to Mac at www.apple.com/getamac/movetomac.
Using iLife applications The iLife website at www.apple.com/ilife. Or open an iLife
application, open Mac Help, and then type a question in
the search field.

Chapter 2 Life with Your Mac Pro 35
Changing System Preferences Open System Preferences by choosing Apple (K) > System
Preferences. Or search for system preferences in Mac Help.
Using your mouse or keyboard Open System Preferences and choose the Keyboard & Mouse
preference. Or open Mac Help and search for mouse or
keyboard.
Using AirPort Extreme
wireless technology
The AirPort Support page at www.apple.com/support/airport.
Or open Mac Help and search for AirPort.
Using Bluetooth

wireless
technology
The Bluetooth Support page at www.apple.com/support/
bluetooth. Or open the Bluetooth File Exchange application,
located in the Utilities folder within the Applications folder,
and choose Help > Bluetooth Help.
Connecting a printer Search for printing in Mac Help.
FireWire and USB connections Search for FireWire or USB in Mac Help.
Connecting to the Internet Search for Internet in Mac Help.
Connecting an external display Search for display port in Mac Help.
Using Front Row Search for Front Row in Mac Help.
Burning a CD or DVD Search for burn disc in Mac Help.
Mac Pro specifications Chapter 5, Whats Under the Hood, on page 85. Or the Mac Pro
specifications page at www.apple.com/macpro/specs.html. Or
open System Profiler by choosing Apple (K) > About This Mac
from the menu bar, and then clicking More Info.
To learn about See
3
3 Making a Good Thing Better
www.apple.com/store
Mac Help RAM

38 Chapter 3 Making a Good Thing Better
Use the information in this chapter to customize and expand your Mac Pro to fit your
needs. You can find information about important procedures in the following sections:
Opening the Mac Pro on page 39
Installing Memory on page 43
Installing Internal Storage Devices on page 51
Adding PCI Express Cards on page 60
Replacing the Internal Backup Battery on page 64
NOTICE: Apple recommends that you have an Apple-certified technician install
memory, PCI Express cards, and internal storage devices. To contact an Apple
Authorized Service Provider or Apple for service, see Learning More, Service, and
Support on page 81. If you install these items yourself, you risk damaging your
equipment, and such damage is not covered by the limited warranty on your
computer. See an Apple Authorized Reseller or Apple Authorized Service Provider for
additional information about this or any other warranty question.

Chapter 3 Making a Good Thing Better 39
Opening the Mac Pro
1 Before you open your Mac Pro, shut it down by choosing Apple () > Shut Down.
2 Wait 5 to 10 minutes to allow the internal components of your Mac Pro to cool.
NOTICE: Always shut down your Mac Pro before opening it to avoid damaging its
internal components or the components you want to install. Do not open your
Mac Pro or attempt to install items inside it while it is on.

WARNING: Let your Mac Pro cool down before you touch the internal components,
which may be very hot.

40 Chapter 3 Making a Good Thing Better
3 Touch the metal on the outside of your Mac Pro to discharge any static electricity.
Important: Always discharge static before you touch parts or install components inside
your Mac Pro. To avoid generating static, do not walk around the room until you finish
installing the cards, memory, or internal storage device and replace the side panel.
Touch the metal
case to discharge
static.

Chapter 3 Making a Good Thing Better 41
4 Unplug all the cables and the power cord from your Mac Pro.
5 Hold the side panel and lift the latch on the back.
NOTICE: To avoid damaging internal components or the components you want
to install, always unplug your Mac Pro. Dont attempt to install items while its
plugged in.

42 Chapter 3 Making a Good Thing Better
6 Remove the side panel by pulling the top away from your Mac Pro and lifting up.
Important: When you remove the side panel, hold it securely.

Chapter 3 Making a Good Thing Better 43
Installing Memory
Your Mac Pro has two memory cards with four memory slots on each card (in four
banks of two each). Your Mac Pro comes with a minimum of 2 GB of memory, installed
as a pair of 1 GB fully buffered dual inline memory modules (FB-DIMMs) in two of the
DIMM slots. You can install additional pairs of 1 GB, 2 GB, or 4 GB FB-DIMMs in the open
DIMM slots on the memory cards, for a total of 32 GB of memory.
DIMMs must be installed in matched pairs and fit these specifications:
800 MHz, DDR2, FB-DIMMs
72-bit wide, 240-pin modules
36 memory ICs maximum per DIMM
Error-correcting code (ECC)
Important: Apple recommends that you use Apple-approved FB-DIMMs. Other
FB-DIMMs may cause your Mac Pro to operate louder or decrease performance to
conserve heat. DIMMs from older Mac computers cannot be used in your Mac Pro.
Note: When purchasing DIMMs for use in Mac computers, make sure that the memory
vendor conforms to the Joint Electron Device Engineering Council (JEDEC)
specification. Check with your memory vendor to ensure that the DIMMs support the
correct timing modes and that the Serial Presence Detect (SPD) feature has been
programmed properly, as described in the JEDEC specification. To check the
compatibility of your DIMMs, see the Macintosh Products Guide on Apples website at
www.apple.com/guide. You can purchase Apple-branded memory online from the
Apple Store at www.apple.com/store.

44 Chapter 3 Making a Good Thing Better
Its important to install FB-DIMMs in matched pairs of equal size and equal
specification. Use the table below and the instructions that follow as guidelines for
DIMM placement.
To install memory:
1 Shut down your Mac Pro, open it, and remove the side panel, following the instructions
on page 39.
If you have Install
Two DIMMs
(standard configuration)
One on the top memory card and one on the bottom card
Four DIMMs One pair on the top memory card and one pair on the
bottom card
Six DIMMs Two pairs on the top memory card and one pair on the
bottom card
Eight DIMMs Two pairs on the top memory card and two pairs on the
bottom card

WARNING: Let your Mac Pro cool down for 5 to 10 minutes before you touch the
internal components. The components on the memory cards may be very hot.

Chapter 3 Making a Good Thing Better 45
2 Using the two finger holes, pull on the memory cards to remove them, and then place
them on a soft, clean cloth with the DIMMs facing up.

46 Chapter 3 Making a Good Thing Better
3 On the bottom memory card, open the ejectors on the DIMM slot and push them out
to the sides, and then remove the DIMM from slot 1.
Important: When installing or removing DIMMs, dont touch the gold connectors on
the DIMMs or the memory cards.
4 Reinstall the DIMM you removed on the top memory card by aligning it in DIMM slot 2,
as shown in the illustration, and pushing both ends of the DIMM down until the tabs
are vertical and the ejectors snap into place.
5 Install the first pair of additional DIMMs on the bottom memory card in DIMM slots 1
and 2, the slots closest to the cards gold connectors.
Important: Always install DIMMs as matched pairs and in the order shown here.
Move one DIMM
from bottom card
to top card
Bottom memory card
First pair of
additional DIMMs
Top memory card
1a 1b

Chapter 3 Making a Good Thing Better 47
6 If you add a second pair of additional DIMMs, install them on the top memory card in
DIMM slots 3 and 4, the last two slots.
7 If you add a third pair of additional DIMMs, install them on the bottom memory card in
DIMM slots 3 and 4.
Second pair of
additional DIMMs
Third pair of
additional DIMMs
Bottom memory card
Top memory card
2 3

48 Chapter 3 Making a Good Thing Better
8 Lay your Mac Pro down on a soft, clean cloth on the desk or work surface to avoid
scratching the work surface or your Mac Pro.
9 Reinstall each memory card, pushing it straight down until its seated in the
memory slot.
Memory slots

Chapter 3 Making a Good Thing Better 49
10 Stand your Mac Pro up and replace the side panel.
Important: When you replace the side panel, make sure the latch is up. Hold the side
panel securely so it stays in place as you push the latch down.
Place the side panel
in the slot and then
push to close.

50 Chapter 3 Making a Good Thing Better
11 Hold the side panel against your Mac Pro and push the latch down to secure the side
panel.
12 You can attach a lock or cable through the metal loop to secure your Mac Pro. Flip the
lock tab down before you close the latch.

Chapter 3 Making a Good Thing Better 51
Installing Internal Storage Devices
Your Mac Pro has room for six internal drives: two optical drives and four hard disk
drives. In most configurations, a single hard disk drive occupies the first hard drive bay
and an optical drive is located in the top optical drive bay.
You can add up to three additional Serial ATA (SATA) hard disk drives to the empty hard
drive bays or up to four Serial Attached SCSI (SAS) drives. The drives must meet these
specifications:
Type: SAS or SATA 3 Gb/s
Width: 3.9 inches (102 mm)
Depth: 5.7 inches (147 mm)
Height: 1.0 inch
Important: To install SAS drives in your Mac Pro, you must also install the optional
Mac Pro RAID Card.
For more information about requirements or devices supported, visit an Apple
Authorized Reseller, the Apple Store at www.apple.com/store, or the Mac Pro Support
site at www.apple.com/support/macpro.
Installing SAS or SATA 3 Gb/s Hard Disk Drives
Your Mac Pro can accommodate up to four internal 1-inch-high SATA or SAS 3 Gb/s
hard disk drives in the hard drive bays. If your Mac Pro comes with a single drive
installed, its in the first bay. You can install drives in the second, third, and fourth hard
drive bays.

52 Chapter 3 Making a Good Thing Better
To install a hard disk drive:
1 Open your Mac Pro and remove the side panel following the instructions that
begin on page 39.
2 Lift the latch to unlock the hard drive carriers.
Important: When the latch is down, the carriers are locked in the drive bays
and cant be removed.
3 Pull the hard drive carrier out of the drive bay.
Hard drive
carrier

Chapter 3 Making a Good Thing Better 53
4 Position the carrier over the hard disk drive with the connectors at the rear.
5 Use the four screws on the carrier to attach the hard disk drive to the carrier.
Important: If the printed circuit board is exposed on the bottom of the hard disk drive,
hold the drive by its sides. To avoid damaging the drive, dont touch the printed circuit
board.
Connectors

54 Chapter 3 Making a Good Thing Better
6 Lift the latch and slide the carrier over the guides and into the drive bay, until its
seated in the bay and snaps into the hard drive connectors.
7 Replace the side panel and push the latch down to secure it.
Hard drive
connectors

Chapter 3 Making a Good Thing Better 55
Replacing the Optical Drive
Your Mac Pro comes with one or two SuperDrives installed in the optical drive bays.
Follow these instructions to replace your optical drive.
Important: Contact your drive manufacturer or consult the manufacturers website to
determine if your drive is set to cable select mode. Before installation, set the drive to
cable select mode if the manufacturer hasnt already done so.
To replace the optical drive:
1 Open your Mac Pro and remove the side panel following the instructions on page 39.
2 Lift the latch to unlock the optical drive carriers.
Important: When the latch is down, the drives and carriers are locked in the drive bays
and cant be removed.
3 Pull the optical drive carrier halfway out of the optical drive bay.

56 Chapter 3 Making a Good Thing Better
4 Disconnect the power and ribbon cables from the optical drive and remove the carrier.
Important: When you install or replace the optical drives, use the original Apple cables
that came with your Mac Pro.

Chapter 3 Making a Good Thing Better 57
5 Remove the optical drive from the carrier by unscrewing the four attachment screws.
6 Use the four screws from the original optical drive to attach the replacement drive to
the carrier.

58 Chapter 3 Making a Good Thing Better
7 Slide the optical drive and carrier over the guides halfway into the drive bay,
8 Attach the power and ribbon cables to the back of the drive.
Ribbon cable
end connector
Power cable
middle connector

Chapter 3 Making a Good Thing Better 59
9 Lift the latch and then slide the optical drive carrier into the drive bay, pushing it
into place.
10 Replace the side panel and push the latch down to secure it.

60 Chapter 3 Making a Good Thing Better
Adding PCI Express Cards
You can expand the capabilities of your Mac Pro by installing cards in the Peripheral
Component Interconnect (PCI) Express slots. Your Mac Pro has one double-wide PCI
Express graphics slot and three PCI Express expansion slots, for a total of four slots.
These slots accommodate PCI Express graphics cards and expansion cards.
About PCI Express Cards
Your Mac Pro comes with a high-performance PCI Express graphics card, which
contains the graphics processor unit (GPU) and provides the computers display ports.
The graphics card is installed in slot 1.
You can install additional PCI Express graphics and expansion cards. Before installing a
card, refer to the table below and check its specifications to make sure it can operate in
your Mac Pro.
Important: Combined maximum power consumption for all four PCI Express slots must
not exceed 300 watts (W).
Slot Type Bandwidth
4 PCI Express 1.1 4-lane
3 PCI Express 1.1 4-lane
2 PCI Express 2.0 16-lane
1 (double-wide) PCI Express 2.0 16-lane

Chapter 3 Making a Good Thing Better 61
To install a PCI Express card:
1 Open your Mac Pro and remove the side panel (see page 39).
2 Lay your Mac Pro down on a soft, clean cloth to avoid scratching it or the work surface.
3 Unscrew the captive screws in the PCI bracket and remove the bracket.

WARNING: To avoid damaging internal components or the components you want to

install, always turn off and then unplug your Mac Pro. Do not attempt to install items
while it is plugged in. Let your Mac Pro cool down for 5 to 10 minutes before you
touch the internal components, which may be very hot.

62 Chapter 3 Making a Good Thing Better
4 Remove the port access cover from the slot in which you plan to install the card.
5 Remove your new card from its static-proof bag and hold it by its corners. Dont touch
the gold connector or the components on the card.
Port access cover
Tab
PCI bracket

Chapter 3 Making a Good Thing Better 63
6 Align the cards connector with the expansion slot and press the card into the slot.
Did You Know?Installing a Full-Length PCI Card
It may be easier to install a PCI card if you remove the hard disk drives and carriers,
and remove adjacent cards. Make sure the end of the card goes in the appropriate
card guide before aligning the card with the PCI slot and completing the installation.
Port access opening
PCI Express slot
PCI bracket
Brace
Card guides

64 Chapter 3 Making a Good Thing Better
7 Press the card gently but firmly until the connector is fully inserted. Press only on the
bare areas of the card to avoid damaging the components.
Note: Dont rock the card from side to side or force it. If you meet resistance, check the
connector and slot for damage or obstructions, and then try inserting the card again.
8 Pull the card gently to see if it is properly connected. If it stays in place and its gold
connectors are barely visible, the card is connected.
9 Replace the PCI bracket under the brace and tighten the screws to secure the card.
10 Replace the side panel and push the latch down to secure it.
Replacing the Internal Backup Battery
Your Mac Pro uses a CR 2032 Lithium battery that preserves settings, such as the date
and time, when your Mac Pro is off. If you notice intermittent problems when your
Mac Pro starts up or changes in the date and time settings, replace the battery.
Important: Dispose of the old battery according to your local environmental laws.
To replace the battery:
1 Open your Mac Pro and remove the side panel, following the instructions on page 39.
2 Remove any PCI Express cards that block access to the battery. See Adding PCI Express
Cards on page 60 for instructions.
NOTICE: If you remove a card and dont install a replacement, place a port access
cover over the empty slot to keep foreign objects out of the enclosure. An uncovered
slot affects the airflow that cools the internal components and may cause damage.

Chapter 3 Making a Good Thing Better 65
3 Remove the old battery from the holder.
4 Insert the new battery in the holder with the positive (+) side facing up.
5 Replace the PCI Express cards that you removed (see page 60).
6 Replace the side panel and push the latch down to secure it.

WARNING: Installing the battery incorrectly may cause an explosion. Use only the
same type of battery or an equivalent recommended by the manufacturer of the
original.
Tab
4
4 Problem, Meet Solution
www.apple.com/support
Mac Help help

68 Chapter 4 Problem, Meet Solution
Occasionally you may have a problem while working with your Mac Pro. This chapter
gives you some solutions to try.
Problems with Your Mac Pro
If your Mac Pro wont respond or turn on, you have trouble ejecting a disk, or the status
light is flashing, try the steps in this section.
If the computer wont respond or the pointer wont move
First, make sure the mouse and keyboard are connected by unplugging and then
plugging in the connectors, and make sure they are firmly seated.
Then try to cancel what the computer is doing.
Press the Command (x) and Q keys at the same time to try to quit the current
application.
Press the Command (x) and period keys at the same time. If a dialog appears,
click Cancel.
Choose Apple () > Force Quit and select the application you want to quit.
You can also force quit by pressing the Esc, Option, and Command (x) keys at the
same time. Restart your Mac Pro by choosing Apple () > Restart to be sure the
problem is entirely cleared up. You can also restart by pressing the power () button
for about 5 or 6 seconds until your Mac Pro shuts down. Press the power () button
again to start up your Mac Pro.
If the problem occurs only when you use a particular program, check with the programs
manufacturer to see if it is compatible with your computer.
If the problem occurs frequently, choose Help > Mac Help and search for problems.

Chapter 4 Problem, Meet Solution 69
If the computer wont turn on or start up
Make sure the power cord is connected to a working power source. The plug on the
power cord must be completely inserted into the computers power socket and
firmly seated.
If your computer still does not start up, try resetting the parameter random access
memory (PRAM). Turn on the computer and immediately hold down the Command
(x), Option, P, and R keys until you hear the startup sound a second time. Release
the keys. Set your hard disk as the computers startup disk, by doing the following:
1 Choose Apple () > System Preferences.
2 Click Startup Disk.
3 Select your hard disk.
The PRAM is reset to the default values and your clock settings may need to be reset.
If your computer does not start up after resetting the PRAM, restart your computer
while holding down the Option key to select your startup disk.
If this doesnt work, restart your computer while holding down the Shift key.
If you are unable to eject a disc
A file on the disc may be in use. Quit applications that are open, and then try again.
If that doesnt work, choose Apple () > Restart and hold down either the mouse
button or the Media Eject (C) key on your Apple Keyboard.
If that doesnt work:
1 Shut down the computer and remove the side panel, see the instructions on page 39.
2 Pull optical drive carrier out of the optical drive bay, see page 55.

70 Chapter 4 Problem, Meet Solution
3 Carefully insert the end of a straightened paper clip into the small hole on the
front of the optical drive.
4 Push firmly until the tray opens, remove the disc, and push the tray to close it.
5 Replace optical drive carrier and the side panel, see page 59.
If the status light flashes and the computer wont start up
If you recently installed memory, a PCI expansion card, or another internal
component, make sure that it is correctly installed and that it is compatible with your
computer. See if removing it allows the computer to start up.
If the status light still flashes, determine the number of flashes to identify the
problem:
One short flash followed by a longer off period: No valid memory.
Three short flashes followed by a longer off period: Failed memory.
Problems with Software
When an application freezes or does not respond, Mac OS X provides a way to quit the
application without restarting your computer. Quitting a frozen application may allow
you to save your work in other open applications.
To force an application to quit:
1 Press Command (x)-Option-Esc or choose Apple () > Force Quit from the menu bar.
2 Select the name of the application you want to quit in the Force Quit Applications
dialogue.
3 Click Force Quit.
The application quits, leaving all other applications open.

Chapter 4 Problem, Meet Solution 71
If you have a problem with a software program
Use Software Update to ensure that you have the latest drivers, bug fixes, and other
updates.
For problems with software from a manufacturer other than Apple, contact the
manufacturer.
If you have a problem using your computer or working with Mac OS X
Look in Mac Help (in the Help menu) for instructions and troubleshooting
information.
For the latest troubleshooting information and software updates, go to the Apple
Support website at www.apple.com/support.
Keeping Your Software Up to Date
You can connect to the Internet and automatically download and install the latest free
software versions, drivers, and other enhancements from Apple.
When you are connected to the Internet, Software Update checks Apples Internet
servers to see if any updates are available for your computer. You can set your Mac to
check the Apple servers periodically and download and install updated software.
To check for updated software:
1 Choose Apple () > Software Update.
2 Follow the onscreen instructions.
For more information, search for Software Update in Mac Help.
For the latest information about Mac OS X, go to the Mac OS X website at
www.apple.com/macosx.

72 Chapter 4 Problem, Meet Solution
Problems with AirPort Wireless Communication
If you have a problem using AirPort wireless communication:
Make sure you have properly configured the software according to the instructions
that came with your base station.
Make sure the computer or network you are trying to connect to is running and has a
wireless access point.
Make sure you are within antenna range of the other computer or the networks
access point. Nearby electronic devices or metal structures can interfere with wireless
communication and reduce this range. Repositioning or rotating the computer may
improve reception.
Check the AirPort signal level. You may have up to four bars in the AirPort status icon
in the menu bar.
For more information, see the instructions that came with the wireless device or
search for AirPort in Mac Help.
Problems with Your Display
NOTICE: If you have a problem with your Apple display and nothing in this manual
solves it, contact an Apple Authorized Service Provider or Apple for assistance. If you
attempt to repair the display yourself, any damage you may cause to the display will
not be covered by the limited warranty on your display. Contact an Apple Authorized
Reseller or Apple Authorized Service Provider for additional information about this or
any other warranty question.

Chapter 4 Problem, Meet Solution 73
If no image appears on the screen
Make sure the display and computer are turned on.
Make sure the cables are connected properly to your computer and the display.
If your graphics card has an internal power cable, make sure its connected to the
card and the logic board.
Make sure your computer is not in sleep. Press the power button or any key to see if
the computer wakes.
Make sure the display brightness and contrast are set properly. Use the brightness
keys on the Apple Keyboard. Some displays also have brightness and contrast
controls on or under their front edge or on the side.
Reset the PRAM by restarting the computer while holding down the Command (x),
Option, P, and R keys until you hear the startup sound a second time. Then start up
using the software installation disc that came with your computer.
If the screen image appears dim or flickers
Adjust the display brightness and contrast settings. Use the brightness keys on the
Apple Keyboard. Some displays also have brightness and contrast controls on or
under their front edge. Or you may be able to adjust brightness or contrast using the
Displays pane of System Preferences.
Calibrate the display by choosing Apple () > System Preferences. Click Displays,
select Color, and click Calibrate. For more information on color and your display,
see Mac Help.

74 Chapter 4 Problem, Meet Solution
The flickering may be caused by interference from a nearby power line, a fluorescent
light, or an electrical devicefor example, a radio, a microwave oven, or another
computer. Try relocating nearby electrical devices or moving your computer and
display.
If no colors appear on the screen or the colors dont look right
Make sure the display is connected firmly to the computer.
Open the Displays pane of System Preferences and make sure the display is set
to display millions of colors. For more information about color and your display, see
Mac Help.
Calibrate the display, as described on page 73.
If after you change the screen resolution, desktop icons move
Changing the screen resolution affects the display of information on your screen.
The operating system may reposition icons when you change the screen resolution.
If the screen freezes
Force the frozen application to quit. Choose Apple () > Force Quit and select the
application.
If that doesnt work, force the computer to restart by pressing the power () button
for 5 or 6 seconds until your Mac Pro shuts down. Press the power () button again
to start up your Mac Pro.

Chapter 4 Problem, Meet Solution 75
If the light on the front of the display is flashing
On some Apple flat panel displays, the power light displays a series of short flashes
when an error is detected.
If you see a repeating sequence of three short flashes, the display is detecting input in
the wrong video format. Make sure your display is compatible with your graphics
card and that youve installed the correct display software, if your display came with
installation software.
If you see a sequence of two short flashes and a long flash, the display is detecting a
problem with a backlighting lamp. Contact an Apple Authorized Reseller or Apple
Authorized Service Provider.
Problems with Your Internet Connection
If you have trouble with your Internet connection, you can try the steps in this section
starting with Network Diagnostics.
To use Network Diagnostics:
1 Choose Apple () > System Preferences.
2 Click Network and then click Assist me at the bottom of the page.
3 Click Diagnostics to open Network Diagnostics.
4 Follow the onscreen instructions.
If Network Diagnostics cant resolve the problem, there may be a problem with the
Internet service provider (ISP) you are trying to connect to, with an external device you
are using to connect to your ISP, or with the server you are trying to access. You can
also try the steps in the following section.

76 Chapter 4 Problem, Meet Solution
Cable Modem, DSL, and LAN Internet Connections
Make sure all modem cables are fully plugged in, including the modem power cord,
the cable from the modem to the computer, and the cable from the modem to the
wall jack. Check the cables and power supplies for Ethernet hubs and routers.
Turn the modem off and on to reset the modem hardware.
Turn off your DSL or cable modem for a few minutes, and then turn it back on. Some
ISPs recommend that you unplug the modems power cord. If your modem has a reset
button, you can press it either before or after you turn the power off and on.
PPPoE Connections
If you are unable to connect to your Internet service provider using PPPoE, make sure
you have entered the correct information in Network preferences.
To enter PPPoE settings:
1 Choose Apple () > System Preferences.
2 Click Network.
3 Click Add (+) at the bottom of the network connection services list, and choose PPPoE
from the Interface pop-up menu.
4 Choose an interface for the PPPoE service from the Ethernet pop-up menu.
Choose Ethernet if you are connecting to a wired network, or AirPort if you are
connecting to a wireless network.
5 Enter the information you received from your service provider, such as the account
name, password, and PPPoE service name (if your service provider requires it).
6 Click Apply to make the settings active.

Chapter 4 Problem, Meet Solution 77
Network Connections
Make sure the Ethernet cable is plugged into your computer and into the network.
Check the cables and power supplies to your Ethernet hubs and routers.
If you have two or more computers sharing an Internet connection, be sure that your
network is set up properly. You need to know if your ISP provides only one IP address
or if it provides multiple IP addresses, one for each computer.
If only one IP address is used, then you must have a router capable of sharing the
connection, also known as network address translation (NAT) or IP masquerading.
For setup information, check the documentation provided with your router or ask the
person who set up your network. You can use an AirPort Base Station to share one IP
address among multiple computers.
For information about using an AirPort Base Station, search for AirPort Mac Help or
visit the AirPort support website at www.apple.com/support/airport.
If you cannot resolve the issue using these steps, contact your ISP or network
administrator.

78 Chapter 4 Problem, Meet Solution
Using Apple Hardware Test
You can use Apple Hardware Test to help determine if there is a problem with your
computers hardware.
To use Apple Hardware Test:
1 Disconnect all external devices from your computer except the keyboard and mouse.
If you have an Ethernet cable connected, disconnect it.
2 Restart your Mac Pro while holding down the D key.
3 When the Apple Hardware Test chooser screen appears, select the language
appropriate for your location.
4 Press the Return key or click the right arrow button.
5 When the Apple Hardware Test main screen appears (after about 45 seconds), follow
the onscreen instructions.
6 Apple Hardware Test displays an error code if it detects a problem. Make a note of the
error code before pursuing support options. If Apple Hardware Test doesnt detect a
hardware failure, the problem may be with your software.
For more information, see the Apple Hardware Test Read Me file on the Mac OS X
Install Disc 1.

Chapter 4 Problem, Meet Solution 79
Reinstalling the Software That Came with Your Computer
Use the software installation discs that came with your computer to reinstall Mac OS X
and the applications that came with your computer.
Installing Mac OS X
To install Mac OS X:
1 Back up your important files, if possible.
2 Insert the Mac OS X Install Disc 1 that came with your computer.
3 Double-click Install Mac OS X and Bundled Software.
4 Follow the onscreen instructions.
5 Select the destination disk for installation and continue following the onscreen
instructions.
Your computer may restart and ask you to insert the next Mac OS X disc.
Installing Applications
To install the applications that came with your computer, follow the steps below.
Your computer must have Mac OS X already installed.
To install the applications:
1 Back up your important files, if possible.
NOTICE: Apple recommends that you back up the data on your hard disk before
restoring software. Apple is not responsible for any lost data.
NOTICE: Because the Erase and Install option erases your destination disk, you
should back up your essential files before installing Mac OS X and other applications.

80 Chapter 4 Problem, Meet Solution
2 Insert the Mac OS X Install Disc 1 that came with your computer.
3 Double-click Install Bundled Software Only.
4 Follow the onscreen instructions.
5 Select the destination disk for installation and continue following the onscreen
instructions.
Note: iCal, iChat, iSync, iTunes, and Safari are part of Mac OS X. To install these
applications, follow the Installing Mac OS X instructions above.
Maximizing Ethernet Performance
Your computer performs best when the Ethernet port to which it is connected is set to
autonegotiate. Ask your network administrator to verify this setting.
Important: If you experience connection problems on your network, make sure your
network switch is set to autonegotiate, if possible. If a switchs port is not
autonegotiating, your computer detects the appropriate speed but defaults to half-
duplex mode. If the switchs port at the other end of the link is configured for full-
duplex mode, a large number of late events can occur on the link. If it isnt possible to
set the switch to autonegotiate, then set the switchs port to half-duplex. For more
information, see the documentation that came with the Ethernet switch.
Note: If you connect your computer directly to a configurable Ethernet switch, have
your network administrator disable the spanning tree protocol on that port. Otherwise
your computer may duplicate the AppleTalk address of another computer on the same
network and both network connections may become unreliable.

Chapter 4 Problem, Meet Solution 81
Learning More, Service, and Support
If your Mac Pro needs service, take it to an Apple Authorized Service Provider or
contact Apple for service. You can find more information about your Mac Pro through
online resources, onscreen help, System Profiler, or Apple Hardware Test.
If you didnt order AirPort wireless technology with your Mac Pro, contact an Apple
Authorized Service Provider or an Apple Store to purchase it and have it installed.
Online Resources
For online service and support information, go to www.apple.com/support. Choose
your country from the pop-up menu. You can search the AppleCare Knowledge Base,
check for software updates, or get help from Apples discussion boards.
Onscreen Help
You can often find answers to your questions, as well as instructions and
troubleshooting information, in Mac Help. Choose Help > Mac Help.
System Profiler
To get information about your computer, use System Profiler. System Profiler shows you
which hardware and software is installed, the serial number and operating system
version, how much memory is installed, and more. To open System Profiler, choose
Apple () > About This Mac from the menu bar and then click More Info.
Apple Hardware Test
You can use Apple Hardware Test to diagnose hardware problems on your Mac Pro.
For more information, see Using Apple Hardware Test on page 78.

82 Chapter 4 Problem, Meet Solution
AppleCare Service and Support Information
Your Mac Pro comes with 90 days of telephone support and one year of service
coverage at an Apple-authorized repair center. You can extend your coverage by
purchasing the AppleCare Protection Plan. For more information, visit the website
address for your country listed below.
If you need further assistance, AppleCare telephone support representatives can help
you with installing and opening applications, and with basic troubleshooting. Call the
support center number nearest you (the first 90 days are complimentary). Have the
date of purchase and your Mac Pro serial number ready when you call.
Note: Your 90 days of complimentary telephone support begins on the date of
purchase. Telephone fees may apply.
For a complete list, go to www.apple.com/contact/phone_contacts.html. Telephone
numbers are subject to change, and local and national telephone rates may apply.
Country Phone Website
United States 1-800-275-2273 www.apple.com/support
Australia (61) 133-622 www.apple.com/au/support
Canada (English)
(French)
1-800-263-3394 www.apple.com/ca/support
www.apple.com/ca/fr/support
Ireland (353) 1850 946191 www.apple.com/ie/support
New Zealand 00800-7666-7666 www.apple.com/au/support
United Kingdom (44) 0870 876 0753 www.apple.com/uk/support

Chapter 4 Problem, Meet Solution 83
Locating Your Serial Number
System Profiler shows the serial number of your Mac Pro. Open System Profiler, located
in the Utilities folder in the Applications folder, and click the System Profile tab.
The serial number is also on the configuration label, which is located on the back of
your Mac Pro near the video ports.
5
5 Whats Under the Hood
www.apple.com/macpro
Mac Help System Profiler

86 Chapter 5 Whats Under the Hood
The technical specifications of your Mac Pro are included in the information that
follows.
Specifications
Use System Profiler to find detailed information about your Mac Pro, including the
amount of installed memory, hard disk size, connected devices, and product serial
number. To open System Profiler, choose Apple () > About This Mac from the menu
bar, and then click More Info.
Processor and Memory Specifications
Processor
One or two Quad-Core Intel Xeon 5400 Series processors
12 MB of on-chip L2 cache per processor
1600 MHz dual independent frontside buses
Random-access memory (RAM)
Fully buffered dual inline memory modules (FB-DIMMs)
PC2-6400, 800 MHz, DDR2, FB-DIMMs
DIMMs must be installed in matched pairs of equal size and equal specification
(an equal number of ICs per DIMM)
Eight DIMM slots available (four slots per memory card)
Error-correcting code (ECC)
72-bit wide, 240-pin modules
36 ICs maximum per DIMM

Chapter 5 Whats Under the Hood 87
Must contain an Apple-approved heat sink (for best acoustic performance)
Must conform to JEDEC specification (see page 43)
Maximum height of 31 mm
Nonparity
Graphics Card
PCI Express or PCI Express 2.0 graphics card with two dual-link Digital Visual Interface
(DVI) connectors.
Video Display Modes
For technical specifications for your display:
Apple displays: Go to www.apple.com/displays
Non-Apple displays: Go to www.apple.com/guide
Storage
Four independent 3 Gb/s Serial ATA (SATA) or Serial Attached SCSI (SAS), cable-free,
direct-attach hard drive bays
Type: SAS or SATA 3 Gb/s
Width: 3.9 inches (102 mm)
Depth: 5.7 inches (147 mm)
Height: 1.0 inch
Four internal hard drive carriers

88 Chapter 5 Whats Under the Hood
PCI Express Expansion
Four full-length PCI Express expansion slots (slot 1 contains the graphics card)
Slots 1 and 2 are 16-lane, PCI Express 2.0 slots
Slots 3 and 4 are 4-lane, PCI Express 1.1 slots
300 W combined maximum for all PCI Express slots
SuperDrive (DVD+R DL/DVDRW/CD-RW) Specifications
Disc diameters supported: 12 cm and 8 cm
Data formats
CD-ROM
CD-Audio
CD-R
CD-RW
CD-I
CD-I Bridge
CD Extended
CD Mixed Mode
Photo CD
Video CD
Enhanced CD
DVD-Video
DVDR
DVDRW

Chapter 5 Whats Under the Hood 89
DVD+R DL
USB Specifications
Support for Universal Serial Bus (USB) 2.0 and 1.1
Seven external USB Type A ports
Two USB 2.0 ports on the front
Three USB 2.0 ports on the back
Two USB 2.0 ports on the Apple Keyboard
Each USB port (front and rear) is on a separate 480 megabit-per-second (Mbit/s)
USB channel
500 milliamperes (mA) available for a total of 1.5 A on the rear and 1.0 A on the front
FireWire Specifications
Support for FireWire 400 and FireWire 800
Four external FireWire ports: one FireWire 400 port (6-pin) and one FireWire 800 port
(9-pin) on both the front and back
Data transfer speed:
FireWire 400: 100, 200, and 400 Mbit/s
FireWire 800: 100, 200, 400, and 800 Mbit/s
Power
Output voltage: Approximately 12 V
Output power: Up to a maximum of 28 W for all 4 ports or 12 W for any one port

90 Chapter 5 Whats Under the Hood
Ethernet Specifications
IEEE 802.3 compliant
Maximum cable length: 100 meters (m)
Protocols: Open Transport, AppleShare, AppleTalk, NetWare for Macintosh, TCP/IP
Connector: RJ-45 for 10Base-T, 100Base-TX, and 1000Base-T
Media, 10Base-T: Category (CAT) 3 or higher UTP on 2 pairs up to 100 m
Media, 100Base-TX: CAT 5e UTP on 2 pairs up to 100 m
Media, 1000Base-T: CAT 5e UTP on 4 pairs up to 100 m
Channel speeds: IEEE Autonegotiation of 10Base-T, 100Base-TX, and 1000Base-T
Bluetooth 2.0+EDR Specifications
Wireless data rate: Up to 3 Mbit/s
Range: Up to 10 meters or 33 feet (data rates may vary depending on environmental
conditions)
Frequency band: 2.4 gigahertz (GHz)
AirPort Extreme Specifications (Optional)
Frequency band: 2.4 and 5 gigahertz (GHz)
Radio output power: 20 dBm (nominal)
Compatibility
802.11a, b, g, and draft n

Chapter 5 Whats Under the Hood 91
Optical Digital Audio Specifications
Data format: Sony/Phillips Digital Interface (S/PDIF) protocol (IEC60958-3)
Connector type: TOSLINK optical (IEC60874-17)
Bits per sample: 16-bit or 24-bit
Optical digital audio out
Based on a typical situation with playback of 1 kHz, 0dBFS 24-bit sine wave, 44.1 kHz
output sample rate, unless otherwise specified below.
Output sample rate: 44.1 kHz, 48 kHz, or 96 kHz
Signal-to-noise ratio: Greater than130 dB
Total harmonic distortion + noise: Less than -130 dB (0.00003 percent)
Optical digital audio in
Based on a typical situation with playback of 1 kHz, 0dBFS 24-bit sine wave, unless
otherwise specified below.
Input sample rate: 44.1 kHz, 48 kHz, or 96 kHz
Signal-to-noise ratio: Greater than130 dB
Total harmonic distortion + noise: Less than -130 dB (0.00003 percent)

92 Chapter 5 Whats Under the Hood
Analog Audio Specifications
Sample rate: 44.1 kHz, 48 kHz, or 96 kHz
Jack type: 1/8 mini
Bits per sample: 16-bit or 24-bit
Frequency response: 20 Hz to 20 kHz, +0.5 dB/-3 dB
Analog audio out using the headphone jack (typical values)
Based on a typical situation with playback of 1 kHz, -3dBFS 24-bit sine wave, 44.1 kHz
output sample rate into 150 ohms unless otherwise specified below.
Output voltage: 1.4 volts (root mean square) (V
rms
) (+5.1 dBu)
Output impedance: 24 ohms
Output power: 90 milliwatts (mW)
Signal-to-noise ratio: Greater than 90 dB
Total harmonic distortion + noise: Less than -75 dB (.02 percent)
Channel separation: Greater than 50 dB
Analog audio line in (typical values)
Based on a typical situation with playback of 1 kHz, -3dBFS 24-bit sine wave, 44.1 kHz
output sample rate unless otherwise specified below.
Maximum input voltage: 2 V
rms
(+8.2 dBu)
Input impedance: Greater than 20 kilohms
Signal-to-noise ratio: Greater than 90 dB
Total harmonic distortion + noise: Less than -85 dB (.006 percent)
Channel separation: Greater than 80 dB

Chapter 5 Whats Under the Hood 93
Analog audio line out (typical values)
Based on a typical situation with playback of 1 kHz, -3dBFS 24-bit sine wave, 44.1 kHz
output sample rate into 100 kilohms unless otherwise specified below.
Output voltage: 1.6 V
rms
(+6.3 dBu)
Output impedance: 24 ohms
Signal-to-noise ratio: Greater than 90 dB
Total harmonic distortion + noise: Less than -85 dB (.01 percent)
Channel separation: Greater than 90 dB
Power Supply
AC line input
Voltage ranges: 100240 V alternating current (AC)
Current: Maximum of 12 A (low voltage range) or 6 A (high voltage range)
Frequency: 5060 Hz
Power Requirements for Expansion Cards and Peripherals
Expansion cards
Combined maximum power consumption for all four PCI Express slots should not
exceed 300 watts (W).
USB devices
Each of the computers built-in USB ports is allotted 500 mA.
FireWire devices
The computer can provide up to 28 W total to the FireWire ports.

94 Chapter 5 Whats Under the Hood
System Clock and Battery
Your computer has CMOS custom circuitry with a long-life battery.
Battery
Use a 3-volt, CR 2032 Lithium coin cell replacement battery (see Replacing the Internal
Backup Battery on page 64).
Dimensions and Operating Environment
Dimensions
Weight: 42.4 lbs. (19.2 kg)
Weight depends on configuration. The weight above is for a basic configuration and
may be greater if optional devices are installed.
Height: 20.12 inches (511 mm)
Width: 8.11 inches (206 mm)
Depth: 18.70 inches (475 mm)
Operating environment
Operating temperature: 50 to 95 F (10 to 35 C)
Storage temperature: 40 to 116 F (40 to 47 C)
Relative humidity: 5% to 95% (noncondensing)
Altitude: 0 to 10,000 feet (0 to 3048 meters)
6
6 Last, but Not Least
www.apple.com/environment
Mac Help ergonomics

96 Chapter 6 Last, but Not Least
This chapter provides important information about safety procedures, routine
maintenance, and ergonomic considerations for using your Mac Pro and display.
For your safety and that of your equipment, follow these rules for handling and
cleaning your Mac Pro and for working more comfortably. Keep these instructions
handy for reference by you and others.
Important Safety Information
The only way to disconnect power completely from your Mac Pro is to unplug the
power cord from the main power supply. To disconnect your display completely,
you must also unplug its power cable from the computer or power outlet. Make sure
that at least one end of the devices power cord is within easy reach so that you can
unplug the computer or display when necessary.
Always take the following precautions.
Disconnect the power plug (by pulling the plug, not the cord), from your computer or
display and disconnect the phone cord if any of the following conditions exists:
The power cord or plug becomes frayed or otherwise damaged
You spill something into the case
Your computer or display is exposed to rain or any other excess moisture
Your computer or display has been dropped or the case has been otherwise
damaged
WARNING: Failure to follow these safety instructions could result in fire, electric
shock, or other injury or damage.

Chapter 6 Last, but Not Least 97
You suspect that your computer or display needs service or repair
You want to clean the computer or the case or screen of the display
If you plan to store your computer for an extended period of time, remove the
battery.
For service or questions about your warranty, contact an Apple Authorized Service
Provider or Apple. Service and support information is included with your computers
documentation.
General Maintenance
If you need to clean the computer or display by doing more than wiping it down with
a clean cloth, follow these instructions:
1 Turn off your computer and display.
2 Disconnect the computer power cable from the electrical outlet or power strip. If your
display is connected to an outlet, disconnect it as well.
3 Disconnect the displays cables from the computer.
4 Clean the display screen with soft, lint-free paper or cloth dampened with mild soap
and water.

WARNING: Do not spray liquid directly onto the display screen. Liquid could drip
inside the display and cause electrical shock.

98 Chapter 6 Last, but Not Least
5 Wipe the computer or display case surfaces lightly with a clean, soft cloth dampened
with water.
Protecting Your Optical Drive
To keep your optical drive working properly:
Position your computer so that the drive tray doesnt bump into anything when it
opens.
Close the drive when youre not using it.
Do not put anything on the drive tray when it is open.
Do not touch the optical drive lens with your fingers. Do not wipe the lens with a
paper towel or other abrasive surface. If you need to clean the lens, see an Apple
Authorized Service Provider for a lens cleaner.
Keep your computer away from any source of moisture.
Laser Information for Optical Disc Drive
The optical disc drive in your computer contains a laser that is safe in normal use but
that may be harmful to your eyes if disassembled. For your safety, have this equipment
serviced only by an Apple Authorized Service Provider.
NOTICE: Dont use alcohol, aerosol sprays, solvents, or abrasives that might damage
the finish on the case.

WARNING: Making adjustments or performing procedures other than those specified

in your equipments manual may result in hazardous radiation exposure.

Chapter 6 Last, but Not Least 99
Maintaining Your Display
To maintain your display and ensure its long life:
Do not press on the surface of the display screen.
Do not write on the screen or touch the screen with a sharp object.
If you will not be using your computer for a day or more, turn off the computer and
display or use Energy Saver.
Turn off your display, turn down the brightness, or use a screen saver program that
dims or varies the image on the screen when the computer is idle for a prolonged time.
Cleaning Your Mighty Mouse
You may need to clean your mouse from time to time to remove dirt and dust that has
accumulated in the scroll ball area. Hold the mouse upside-down and roll the scroll ball
vigorously using a clean, soft, lint-free cloth to help dislodge any particles that may
interfere with proper scrolling.

100 Chapter 6 Last, but Not Least
Understanding Ergonomics
Here are some tips for setting up a healthy work environment.
Use an adjustable chair that provides firm, comfortable support. Adjust the height of
the chair so your thighs are tilted slightly and your feet are flat on the floor.
The back of the chair should support your lower back (lumbar region). Follow the
manufacturers instructions for adjusting the backrest to fit your body properly.
When you use the computer keyboard, your shoulders should be relaxed. Your upper
arm and forearm should form an approximate right angle, with your wrist and hand
in roughly a straight line.
You may have to raise the chair so that your forearms and hands are at the proper
angle to the keyboard. If this makes it impossible to rest your feet flat on the floor,
you can use a footrest with adjustable height and tilt to make up for any gap
between the floor and your feet. Or you can lower the desktop to eliminate the need
for a footrest. Another option is to use a desk with a keyboard tray thats lower than
the regular work surface.
Position the mouse at the same height as the keyboard and within comfortable
reach.
Arrange the display so that the top of the screen is slightly below eye level when
youre sitting at the keyboard. The best distance from your eyes to the screen is up to
you, although most people seem to prefer 18 to 28 inches (45 to 70 cm).

Chapter 6 Last, but Not Least 101
Position the display to minimize glare and reflections on the screen from overhead
lights and nearby windows.
More information about ergonomics is available on the web:
Thighs tilted
slightly
Shoulders
relaxed
Screen positioned to
avoid reflected glare
Forearms and
hands in a
straight line
Forearms level
or tilted slightly
Lower back
supported
Feet flat on the floor
or on a footrest
Top of the screen at or
slightly below eye level
(You may need to adjust
the height of your display
by raising or lowering
your work surface.)
Clearance under
work surface
4570 cm (1828 in.)
www.apple.com/about/ergonomics

102 Chapter 6 Last, but Not Least
Avoid Hearing Damage
Apple and the Environment
Apple Inc. recognizes its responsibility to minimize the environmental impacts of its
operations and products.
More information is available on the web:
WARNING: Permanent hearing loss may occur if earbuds or headphones are used at
high volume. You can adapt over time to a higher volume of sound that may sound
normal but can be damaging to your hearing. If you experience ringing in your ears
or muffled speech, then stop listening and have your hearing checked. The louder the
volume, the less time required before your hearing can be affected. Hearing experts
suggest that to protect your hearing:
Limit the amount of time you use earbuds or headphones at high volume
Avoid turning up the volume to block out noisy surroundings
Turn the volume down if you cant hear people speaking to you
www.apple.com/environment
103
Regulatory Compliance Information
Compliance Statement
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation. See instructions if interference to radio or
television reception is suspected.
Lutilisation de ce dispositif est autorise seulement aux
conditions suivantes : (1) il ne doit pas produire de
brouillage et (2) lutilisateur du dispositif doit tre prt
accepter tout brouillage radiolectrique reu, mme si
ce brouillage est susceptible de compromettre le
fonctionnement du dispositif.
Radio and Television Interference
This computer equipment generates, uses, and can
radiate radio-frequency energy. If it is not installed and
used properlythat is, in strict accordance with Apples
instructionsit may cause interference with radio and
television reception.
This equipment has been tested and found to comply
with the limits for a Class B digital device in accordance
with the specifications in Part 15 of FCC rules. These
specifications are designed to provide reasonable
protection against such interference in a residential
installation. However, there is no guarantee that
interference will not occur in a particular installation.
You can determine whether your computer system is
causing interference by turning it off. If the interference
stops, it was probably caused by the computer or one of
the peripheral devices.
If your computer system does cause interference to
radio or television reception, try to correct the
interference by using one or more of the following
measures:
Turn the television or radio antenna until the
interference stops.
Move the computer to one side or the other of the
television or radio.
Move the computer farther away from the television or
radio.
Plug the computer into an outlet that is on a different
circuit from the television or radio. (That is, make
certain the computer and the television or radio are
on circuits controlled by different circuit breakers
or fuses.)
If necessary, consult an Apple Authorized Service
Provider or Apple. See the service and support
information that came with your Apple product. Or,
consult an experienced radio/television technician for
additional suggestions.
Important: Changes or modifications to this product
not authorized by Apple Inc. could void the EMC
compliance and negate your authority to operate the
product.
This product has demonstrated EMC compliance under
conditions that included the use of compliant peripheral
devices and shielded cables between system
components. It is important that you use compliant
peripheral devices and shielded cables (including
Ethernet network cables) between system components
to reduce the possibility of causing interference to
radios, television sets, and other electronic devices.
104
Responsible party (contact for FCC matters only):
Apple Inc. Corporate Compliance
1 Infinite Loop M/S 26-A
Cupertino, CA 95014-2084
Wireless Radio Use
This device is restricted to indoor use due to its
operation in the 5.15 to 5.25 GHz frequency range to
reduce the potential for harmful interference to co-
channel Mobile Satellite systems.
Cet appareil doit tre utilis lintrieur.
Exposure to Radio Frequency Energy
The radiated output power of the AirPort Card in this
device is below the FCC radio frequency exposure limits
for uncontrolled equipment. This device should be
operated with a minimum distance of at least 20 cm
between the AirPort Card antennas and a persons body
and must not be co-located or operated with any other
antenna or transmitter.
FCC Bluetooth Wireless Compliance
The antenna used with this transmitter must not be
colocated or operated in conjunction with any other
antenna or transmitter subject to the conditions of the
FCC Grant.
Bluetooth Industry Canada Statement
This Class B device meets all requirements of the
Canadian interference-causing equipment regulations.
Cet appareil numrique de la Class B respecte toutes les
exigences du Rglement sur le matriel brouilleur
du Canada.
Industry Canada Statement
Complies with the Canadian ICES-003 Class B
specifications. Cet appareil numrique de la classe B est
conforme la norme NMB-003 du Canada. This device
complies with RSS 210 of Industry Canada.
EuropeEU Declaration of Conformity
See www.apple.com/euro/compliance.
Korea Statements
Apple Inc /
APL-A1186 (B)
Mac Pro (A1186)
Apple Inc /
APL-A1243 (B)
Keyboard (A1243)
Mighty Mouse
Apple Inc /
Mighty Mouse
Apple Inc /
105
Singapore Wireless Certification
Taiwan Wireless Statements
Taiwan Statement
VCCI Class B Statement
Mouse Class 1 LED Information
The Apple Mighty Mouse is a Class 1 LED product in
accordance with IEC 60825-1 A1 A2.
It also complies with the Canadian ICES-003 Class B
Specification.
External USB Modem Information
When connecting your Mac Pro to the phone line using
an external USB modem, refer to the
telecommunications agency information in the
documentation that came with your modem.
106
Disposal and Recycling Information
This symbol indicates that your product must be
disposed of properly according to local laws and
regulations. When your product reaches its end of life,
contact Apple or your local authorities to learn about
recycling options.
For information about Apples recycling program, go to
www.apple.com/environment/recycling.
Battery Disposal Information
Dispose of batteries according to your local
environmental laws and guidelines.
California: The coin cell battery in your product
contains perchlorates. Special handling and disposal
may apply. Refer to www.dtsc.ca.gov/hazardous waste/
perchlorate.
Nederlands: Gebruikte batterijen kunnen worden
ingeleverd bij de chemokar of in een speciale
batterijcontainer voor klein chemisch afval (kca) worden
gedeponeerd.
Deutschland: Das Gert enthlt Batterien. Diese
gehren nicht in den Hausmll. Sie knnen verbrauchte
Batterien beim Handel oder bei den Kommunen
unentgeltlich abgeben. Um Kurzschlsse zu vermeiden,
kleben Sie die Pole der Batterien vorsorglich mit einem
Klebestreifen ab.
107
Taiwan:
European UnionDisposal Information
The symbol above means that according to local laws
and regulations your product should be disposed of
separately from household waste. When this product
reaches its end of life, take it to a collection point
designated by local authorities. Some collection points
accept products for free. The separate collection and
recycling of your product at the time of disposal will
help conserve natural resources and ensure that it is
recycled in a manner that protects human health and
the environment.
Looking for Something?
110 Looking for Something?
Index
A
adapter 14
DVI to ADC 14
DVI to VGA 14
AirPort Extreme 35, 90
specifications 90
analog audio 92
line in 31, 92
line out 31, 92
AppleCare Service and
Support 82
Apple Hardware Test 81
Apple Keyboard 27
applications
Bluetooth File Exchange 35
force quit 68
freezing 70
Front Row 35
installing 79
problems 70
assistants
Setup Assistant 17
audio 91
B
battery 94
disposal 106
internal backup battery 33
replacing 64
specifications 94
Bluetooth 35, 90
specifications 90
Bluetooth File Exchange 35
brightness keys 27
C
CD-RW 88
changing
the desktop 17
System Preferences 17
cleaning
computer 97
display 97
mouse 99
computer disposal 106
computer wont turn on 69
controls
brightness 27
eject CD or DVD 27
Front Row 27
media 27
mute 27
volume 27
D
Dashboard key 27
desktop, customizing 17
dimensions 94
DIMMs 33, 43, 44, 86
discharging static 40
disconnect power
shut off power 96
display 14, 31, 73, 87
disposal of
batteries 106
computer 106
Dock 34
downloading software 71
DVD 88
DVI display port 14, 31
E
environmental impact 102
ergonomics 100
Escape key 27
Ethernet 29, 90
maximizing
performance 80
specifications 90
expansion cards 93
Expos All Windows key 27
Looking for Something? 111
F
F1 to F19 function keys 27
FB-DIMMs 33, 43, 86
Finder 34
FireWire 25, 29, 89
connections 35
devices 93
specifications 89
Force Quit 70, 74
Front Row
application 35
key 27
frozen application 70
function (fn) key 27
G
general maintenance 97
graphics card 87
H
hand positions 100
hard disk drive 33, 51
headphone jack 25, 92
I
iLife 34
installing
applications 79
hard disk drives 51
Mac OS X 79
memory 43
PCI Express cards 60
SuperDrive 55
Internet
problems connecting 76
J
JEDEC specification 43, 87
K
keyboard 26
connecting 16
function keys 27
keyboard extender cable 17
keys
brightness 27
Dashboard 27
Escape 27
Expos 27
Front Row 27
function 27
media 27
Media Eject 27
Mute 27
volume 27
L
latch 29, 50
M
Mac Help 34
Mac OS X 34
installing 79
keeping up to date 71
maintenance 97
Media Eject key 27
media keys 27
memory 43
installing 43
location 33
memory cards 43
specifications 86
Mighty Mouse
cleaning 99
connecting 16
Mute key 27
N
network connections 77
no image on screen 73
O
online resources 81
opening your Mac Pro 39
operating environment 94
optical digital audio 31, 91
optical drive 25, 33, 51, 88
P
PCI Express
expansion slots 31, 33
graphics card 33
installing cards 60
specifications 93
peripherals 93
ports 93
112 Looking for Something?
audio 31
display 13, 31
Ethernet 15, 29
FireWire 25, 29, 89
power 89
USB 16, 25, 29, 89
power button 17, 25
power cord 12
power requirements 93
power socket 29
power supply 93
problems
connecting to Internet 76
processor 86
protective film 10
R
RAM 33, 43, 86
reset the PRAM 69
S
SAS drive 51
screen
setting brightness 27
screen freezes 74
Serial ATA drive 51
Serial Attached SCSI drive 51
serial number 83
service and support
information 82
setting up 11
shutting off power 11, 20, 39
sleep 19, 25
software updating 71
specifications 35, 86
AirPort Extreme 90
analog audio 92
audio 91
battery 94
Bluetooth 90
Ethernet 90
expansion cards 93
FireWire 89
graphics card 87
JEDEC 43
memory 86
optical digital audio 91
optical drive 88
PCI Express cards 93
peripherals 93
power supply 93
processor 86
SuperDrive 88
system clock 94
static, discharging 40
status light 25, 70
stopping
an application 70
SuperDrive 25, 33, 55, 88
system clock 94
System Preferences
customizing the desktop 17
Software Update 71
System Profiler 35, 86
T
technical specifications 86
telephone support 82
troubleshooting 67
typing position 100
U
unable to eject a disc 69
updating software 71
USB 16, 25, 29, 89
connections 35
devices 93
specifications 89
V
video display modes 87
Volume keys 27
W
wireless technology 35
K Apple Inc.
2008 Apple Inc. All rights reserved.
Under the copyright laws, this manual may not be
copied, in whole or in part, without the written consent
of Apple.
The Apple logo is a trademark of Apple Inc., registered
in the U.S. and other countries. Use of the keyboard
Apple logo (Option-Shift-K) for commercial purposes
without the prior written consent of Apple may
constitute trademark infringement and unfair
competition in violation of federal and state laws.
Every effort has been made to ensure that the
information in this manual is accurate. Apple is not
responsible for printing or clerical errors.
Apple
1 Infinite Loop
Cupertino, CA 95014-2084
408-996-1010
www.apple.com
Apple, the Apple logo, Apple Cinema Display, AirPort,
AirPort Extreme, AppleShare, AppleTalk, Cover Flow,
Expos, FireWire, GarageBand, iCal, iLife, iMovie, iPhoto,
iPod, iTunes, Mac, Mac OS, Macintosh, Macintosh
Products Guide, and SuperDrive are trademarks of Apple
Inc., registered in the U.S. and other countries.
Finder, the FireWire logo, iPhone, iWeb, and Safari are
trademarks of Apple Inc.
AppleCare and Apple Store are service marks of Apple
Inc., registered in the U.S. and other countries.
Mighty Mouse & 2007 CBS Operations Inc. All rights
reserved.
The Bluetooth word mark and logos are owned by the
Bluetooth SIG, Inc. and any use of such marks by Apple
Inc. is under license.
This product includes software developed by the
University of California, Berkeley, and its contributors.
Intel, Intel Core, and Xeon are trademarks of Intel Corp.
in the U.S. and other countries.
Other company and product names mentioned herein
are trademarks of their respective companies. Mention
of third-party products is for informational purposes
only and constitutes neither an endorsement nor a
recommendation. Apple assumes no responsibility with
regard to the performance or use of these products.
Manufactured under license from Dolby Laboratories.
Dolby, Pro Logic, and the double-D symbol are
trademarks of Dolby Laboratories. Confidential
Unpublished Works, 19921997 Dolby Laboratories,
Inc. All rights reserved.
The product described in this manual incorporates
copyright protection technology that is protected by
method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this
copyright protection technology must be authorized by
Macrovision Corporation and is intended for home and
other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216,
4,819,098 and 4,907,093 licensed for limited viewing
uses only.
Simultaneously published in the United States and
Canada.