0% found this document useful (0 votes)
48 views

BE - 505 B.E. V Semester Mid Term Examination, Sep. 2014: Power System I

An aluminum or copper conductor supported by insulators that interconnects the loads and the sources of electric power in an electric power system. Bur bars are the important elements in the electrical substation. Bus bars acts as nodal point in the substation which connects

Uploaded by

pragatijoshi30
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
48 views

BE - 505 B.E. V Semester Mid Term Examination, Sep. 2014: Power System I

An aluminum or copper conductor supported by insulators that interconnects the loads and the sources of electric power in an electric power system. Bur bars are the important elements in the electrical substation. Bus bars acts as nodal point in the substation which connects

Uploaded by

pragatijoshi30
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Roll No........................

BE - 505
B.E. V Semester Mid Term Examination, Sep. 2014
Power System I

Time: Two Hours Maximum Marks: 28
Note: i) Answer three questions. I n each question part a, b, c is compulsory and d
part has internal choice.
ii) All parts of each question are to be attempted at one place.

UNIT - 1
a) Explain Conventional and Non-conventional Generation. 2
b) Which problems are associated with modern large interconnected power system? 2
c) Defind : 1)Load curve, 2)Demand factor, 3)Diversity factor. 3
d) Explain Effect of transmission voltage on power system Economy. 7
OR
Explain MHD generator,Wind power genration, Tidal power genration?
UNIT - 2
a) General construction of a Cable? 2
b) Comparision of Underground cable and Ovehead line ? 2
c) Describe Capacitance of single phase line? 3
d) Two conductor of a singl phase line,each of 1cm daimeter or arranged in a vertical plane
with one conductor mounted 1m above the other. Asecond identical line is mounted at
the same hight as the first and spaced horizontally 30cm apart from it. The upper and
lower conductor are connected in parallel. Determined the inductance per Km of the
resulting double circuit? 7
OR
Determine flux Linkages of one conductor in a Group?

You might also like