Scribd
Upload
31 views

Implementing Different Kind of Vlans On Switches

This document outlines a lab experiment on implementing different types of VLANs on switches. The lab involves configuring VLANs on a single switch and multiple switches connected in a topology. It also requires setting up inter-VLAN routing between VLANs on different subnets and applying port security to interfaces on each VLAN.

Uploaded by

Chandra Prakash Meena
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
31 views

Implementing Different Kind of Vlans On Switches

This document outlines a lab experiment on implementing different types of VLANs on switches. The lab involves configuring VLANs on a single switch and multiple switches connected in a topology. It also requires setting up inter-VLAN routing between VLANs on different subnets and applying port security to interfaces on each VLAN.

Uploaded by

Chandra Prakash Meena
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

INT507: NETWORK ADMINISTRATION LABORATORY

Lab 9: Virtual LANs



Chandra Prakash, LPU Page 1

AIM: Implementing different kind of VLANs on Switches. Creating VLANs, Static Vlan
and Dynamic VLAN Configuring VMPS
-----------------------------------------------------------------------------------------------------------------------
1. Configure VLAN on given single switch. Assigning Switch Ports to VLANs

2. Configure VLAN on 2 switches as per the given topology


3. Configure the following topology and create inter-VLAN Routing
INT507: NETWORK ADMINISTRATION LABORATORY
Lab 9: Virtual LANs

Chandra Prakash, LPU Page 2




4. Configure inter-VLAN Routing for the following diagram and write the commands for configuring
the VLANs and routers.
Also give port-security on VLAN 3 and VLAN 4.
PC0-PC1 are in VLAN1.---192.168.0.0/28
PC2-PC3 are in VLAN2-- 192.168.1.0/28
PC4-PC5 are in VLAN3--192.168.2.0/28
PC6-PC7 are in VLAN4--192.168.3.0/28
Also apply port Security on one interface of switch in each VLAN. write the commands for
configuration as well as port security.

You might also like