0% found this document useful (0 votes)
13 views

We 3 Flat Slabs V8B 17 Sep 07.doc 17-Sep-07 Page 3 of 20

The document calculates design moments in a bay of a flat slab with spans of 8.5m and 4m. It determines the hogging moment at the support as 952.8 kNm and sagging moment in the bay as 842.7 kNm. It then apportions these moments between the column strip, which is 3m wide, and the middle strip, also 3m wide. The column strip takes 70% of the hogging moment and 50% of the sagging moment, while the middle strip takes the remaining 30% and 50% respectively.

Uploaded by

NrcX
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
13 views

We 3 Flat Slabs V8B 17 Sep 07.doc 17-Sep-07 Page 3 of 20

The document calculates design moments in a bay of a flat slab with spans of 8.5m and 4m. It determines the hogging moment at the support as 952.8 kNm and sagging moment in the bay as 842.7 kNm. It then apportions these moments between the column strip, which is 3m wide, and the middle strip, also 3m wide. The column strip takes 70% of the hogging moment and 50% of the sagging moment, while the middle strip takes the remaining 30% and 50% respectively.

Uploaded by

NrcX
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

WE 3 Flat Slabs v8b 17 Sep 07.

doc 17-Sep-07 Page 3 of 20


Design moments in bay
Spans
M
Ed
= (1.25 8.5 0.090 + 1.5 4.0 0.100) 6.0 9.5
2
= 842.7 kNm

<Concise EC2Table 15.3>
Support
M
Ed
= 16.6 0.106 6.0 9.5
2
= 952.8 kNm

<Concise EC2 Table 15.3>


Figure 3.20
Column and middle strips
Apportionment of moments between column strips and middle strips:
-ve (hogging) Long span = 70%


Short span = 75%
Long span = 30%
Short span = 25%
<Table I.1, CS Flat slab
guide
[29]
>
+ve (sagging) 50% 50% <Table I.1>
Parallel to grid C, column strip is l
y
/ 2 = 3 m wide. The middle strip is also 3 m wide. <NA.3
[1a]
, Fig. I.1>

Long span moments:
M
Ed

Column strip, 3 m wide Middle strip, 3 m wide
-ve (hogging) 0.70 952.8 / 3.0 = 222.3 kNm / m 0.30 952.8 / 3.0 = 95.3 kNm / m
+ve (sagging) 0.50 842.7 / 3.0 = 140.5 kNm / m 0. 50 842.7 / 3.0 = 140.5 kNm / m

You might also like