Ruebush 113 Instructions Rev 06-10-2009
Uploaded by
SU Media ServicesRuebush 113 Instructions Rev 06-10-2009
Uploaded by
SU Media ServicesRuebush 113 • page 1 of 2 rev.
06-10-2009
To turn on the There is a white keypad on top of the instructor
podium. Press the “ON” button in the upper left
projector
corner. Press the “OFF” button when you are
finished.
To turn on the Press the button labeled “ON/OFF BUTTON
FOR SOUND SYSTEM ONLY” in the lower right of
sound system
the white keypad. Press it again to turn off the
sound system when you are finished.
Not sure if the sound system is on or off? Open the door of the black cabinet
and look through the see-through panel labeled “Amplifier.” When the amplifier is
on, it lights up; when the amplifier is off, it is not lit.
To select the Press “Computer” on the white keypad.
podium computer
Connecting Connect your laptop to the audio and video inputs
to the right of the white keypad. You may use the
your laptop to cables in the bin located on the side of the black
projector and cabinet. After turning on the projector and sound
sound system: system (see above), press “Laptop” on the white
keypad.
To connect Connect your MP3 player to the audio input to the
right of the white keypad. You may use the audio
your MP3 cable in the bin located on the side of the black
player to the cabinet. After turning on the sound system (see
sound system: above), press “Laptop” on the white keypad.
To select the VCR, After turning on the projector (if needed) and sound
record player, or system (see above), press “VCR,” “PHONO,” or
tape player: “TAPE” on the white keypad.
Volume up and down buttons are on the left side of the white keypad.
SU Media Services • 540-665-4551 • www.su.edu/library/media
Ruebush 113 • page 2 of 2 rev. 06-10-2009
To play an audio CD:
●
Turn on the sound system and select the
podium computer.
●
Insert the CD in the drive on the front of the
podium computer.
● A window will appear asking what you would
like to do with the CD. (If not, select iTunes from Start→Programs.)
●
Select “Play audio CD using iTunes” and
press OK.
●
Press the play button
(circled in yellow below)
to begin playing the CD.
Alternate CD playing methods:
● Connect your laptop (see pg. 1) and play CD in it.
● Play CD in Samsung DVD player (see below).
No sound? Try these steps while playing sound from your source (Laptop, DVD, etc.).
● The sound system may have been left on before you entered the room (in which case pressing
“ON/OFF BUTTON FOR SOUND SYSTEM ONLY” would have turned it off). Open the door of the
black cabinet and look through the see-through panel labeled “Amplifier.” When the amplifier is on,
it lights up; when the amplifier is off, it is not lit. If you cannot tell whether it is on or off, press the
button labeled “ON/OFF BUTTON FOR SOUND SYSTEM ONLY” again in the lower right of the
white keypad. The amplifier should light up. Then, press the source button again for whichever
source your sound is coming from (Laptop, DVD, etc.).
●
Press and hold the volume up button (on the left of the white keypad) to make sure the volume is
not turned down.
●
Make sure the volume is not turned down or muted on your sound source (for example, if you
are playing music from iTunes on your computer, make sure the volume is not muted or turned
down on the iTunes volume control or on your system's volume control).
To play a DVD-video disc:
●
Insert the DVD in the Samsung DVD player inside the black cabinet.
● Press “DVD” on the white keypad.
●
Use the transport control buttons (play, stop, etc.) on the right side of
the white keypad to control the DVD player.
Please report any problems – Visit www.su.edu/library/media and click on “Report an Issue.”
Need more help or training on audio-visual equipment? We're here to help.
Visit www.su.edu/library/media and click on “Request a Support Appointment.”
