Scribd
Upload
320 views

@perkins: 1300 Series Edi 1306C-E87Tag4

The document provides specifications for the Perkins 1306C-E87TAG4 diesel engine. It is a 6-cylinder, turbocharged and intercooled unit producing 217kWm at 1500rpm and 235kWm at 1800rpm. The engine features hydraulically-actuated electronically controlled fuel injectors and full electronic management for reliable, quiet and economic operation. It is suitable for baseload, prime and standby power applications in generator sets. Key features and performance details are given including dimensions, fuel consumption, lubrication systems and other technical specifications.

Uploaded by

MianWaqar
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
320 views

@perkins: 1300 Series Edi 1306C-E87Tag4

The document provides specifications for the Perkins 1306C-E87TAG4 diesel engine. It is a 6-cylinder, turbocharged and intercooled unit producing 217kWm at 1500rpm and 235kWm at 1800rpm. The engine features hydraulically-actuated electronically controlled fuel injectors and full electronic management for reliable, quiet and economic operation. It is suitable for baseload, prime and standby power applications in generator sets. Key features and performance details are given including dimensions, fuel consumption, lubrication systems and other technical specifications.

Uploaded by

MianWaqar
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

@Perkins

1300 Series EDi

Diesel engine - ElectropaK

1306C-E87TAG4

217 kWm 1500 rev/min


235 kWm 1800 rev/min

The Perkins 1300 Series EDi family


of ElectropaK engines has become
renowned throughout the power
generation industry for the engines
superior performance and reliability.
The 1306C-E87TAG4 engine is a
turbocharged and air-to-air charge
cooled unit, featuring hydraulicallyactuated electronically controlled unit
injectors (HEUI) with full authority
electronic engine management
providing reliable, quiet, economic
operation supported by the quick
starting, fast response and close
control demanded by the electrical
power generation market.

High performance productive power


H ydraulically actuated E lectronically controlled Unit Injectors high-pressure fuel injection gives
consistent, reliable high performance.
Constant electronic engine management and monitoring enable precise fuel metering and
injection timing to ensure reliable low temperature starting, superb economy with performance
and very close governing.

Quiet, clean power


A rigid structure minimises noise transmission and helically cut gears provide quiet power
transfer to auxiliaries.
Forced induction and electronic fuel injection control combine to reduce combustion noise while
electronically optimised fuel/air mixing ensures complete combustion resulting in virtually smoke
free operation with emissions capability matching current and future emissions legislation.

Durable power
A fully balanced induction-hardened steel crankshaft gives smooth performance with minimised
bearing loads.
Oil cooled pistons with keystone top and second rings give longer life while positive rotational
valves and roller cam followers reduce wear on valve seats, tappets and cam lobes.

Reliable power
Cylinder head coolant is directed to valve bridges and injectors and lubricating oil is cooled in a
high efficiency oil cooler, both features enhancing engine reliability.
Electronic safety shutdown option protects the engine while event and fault warning codes
protect operations.

Easy maintenance
Electronic diagnostics help to keep the engine at its productive best while enabling the operator
to plan maintenance. Oil and filter changes at 450 hours reduce down time.
All engines are supported by the Perkins worldwide network of 4,000 distributors and dealers.

Engine Speed
(rev/min)
1500
Rating Code
M159
1800
Rating Code
M162

Type of Operation
Baseload Power
Prime Power
Standby (maximum)
Baseload Power
Prime Power
Standby (maximum)

Typical Generator
Output (net)
kVA
kWe
205
165
228
182
250
200
223
178
245
196
270
216

Engine Power
Gross
kW
185
205
224
200
220
242

Net
bhp
248
273
300
269
295
325

kW
179
198
217
194
213
235

bhp
241
265
291
261
286
315

1500/1800 rev/min switchable ratings are offered for stand-alone non-load sharing gen. set applications. Rating code M168 applies
The above ratings represent the engine performance capabilities to conditions specified in ISO 8528/1, ISO 3046/1:1986, BS5514/1,DIN 6271.
Derating may be required for conditions outside these; consult Perkins Engines Company Limited
Generator powers are typical and are based on an alternator efficiency of 92% and a power factor (cos. ) of 0.8 Performance tolerance is 5%
Fuel specification: BS 2869: Part 2 1998 Class A2 or ASTM D975 D2
Lubricating oil: 15W40 to ACEA E3 or API CG4
Rating Definitions
Baseload power: Power available for continuous full load operation. Overload of 10% permitted for 1 hour in every 12 hours operation
Prime power: Power available at variable load with a load factor not exceeding 80% of the prime power rating. Overload of 10% is permitted for
1 hour in every 12 hours operation
Standby power (maximum): Power available at variable load in the event of a main power network failure up to a maximum of 500 hours per year of which up to 300 hours may be
continuous. No overload is permitted.

1300 Series EDi


1306C-E87TAG4
Standard ElectropaK Specification
Air Inlet
Mounted air filter and turbocharger

Fuel System

Hydraulically actuated electronically controlled unit fuel


injectors with full authority electronic control
Electronic governing to ISO3046-4 with stand alone
isochronous or load sharing capabilities
Spin-on fuel filter with pre-filter and hand primer pump

Lubrication System
Wet rear well steel sump with filler and dipstick
Full-flow spin-on filter
Tube-type oil cooler thermostatically controlled

Cooling System
Thermostatically controlled system with belt-driven circulating
pump and 24 inch belt-driven fan
Radiator mounted with all guards and pipes
Air/air charge cooler incorporated in radiator
Coolant filter/conditioner

Electrical Equipment

24 Volt starter motor and 24 Volt 45 Amp alternator with DC


output
Electronic Control Module mounted on engine with wiring
looms and sensors
3 level engine protection system

Flywheel and Housing


High inertia flywheel to SAE J620 Size 11
Cast iron SAE 2 flywheel housing

Mountings
Front engine mounting bracket

Optional Equipment
12V starter and alternator
12V ECM
Sensor positions for:
oil pressure
oil temperature
coolant temperature
SAE 1 flywheel housing and flywheel
Turbocharger exhaust outlet
Users handbook and parts manual
Workshop manual

General Data
Number of Cylinders
Cylinder Arrangement
Cycle
Induction System
Combustion System
Cooling System
Bore and Stroke
Displacement
Compression Ratio
Direction of Rotation
Total Lubrication System
Capacity
Total Coolant Capacity
Dry Weight (Engine)
Length
Width
Height

Fuel Consumption
1500 rev/min
l/hr Imp gal/hr
At Standby Rating
53.0
11.7
At Prime Power Rating
48.5
10.7
At 75% of Prime Power 37.5
8.3
At 50% of Prime Power 26.1
5.7

1800 rev/min
l/hr Imp gal/hr
61.0
13.4
54.4
12.0
40.3
8.8
27.9
6.2

1369mm

@Perkins

All information in this leaflet is substantially correct at the time of printing but may be changed
subsequently by the Company

26.4 litres
37.2 litres
895 kg
1822 mm
875 mm
1369 mm

Engine Speed

1539mm

Perkins Engines Company Limited


Peterborough PE1 5NA
United Kingdom
Telephone +44 (0)1733 583000
Fax +44 (0)1733 582240
www.perkins.com

6
Vertical in-line
4 stroke
Turbocharged air/air charge
cooled
Direct injection
Water-cooled
116.6 x 135.9 mm
8.7 litres
16.9:1
Anti-clockwise viewed on
flywheel

1822mm

Distributed by

875mm

You might also like