Scribd
Upload
119 views

Instructions

The document provides instructions for using a cylinder drill jig to drill out a locked cylinder and remove broken pins and springs to unlock it.

Uploaded by

varm1nt
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
119 views

Instructions

The document provides instructions for using a cylinder drill jig to drill out a locked cylinder and remove broken pins and springs to unlock it.

Uploaded by

varm1nt
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Instructions

Cylinder Drill Jig

No. CDJ-1

Place the roll pins of the jig into the top and bottom
portion of the keyway as shown. Keep the drill bit
perpendicular to the face of the cylinder while drilling.
Remove as much of the broken pins and springs as
possible. Insert a screwdriver into the keyway and turn
to unlock.
040500

35T00-069-00

2000 HPC, Inc. Schiller Park, IL 60176 USA www.hpcworld.com

Instructions
Cylinder Drill Jig

No. CDJ-1

Place the roll pins of the jig into the top and bottom
portion of the keyway as shown. Keep the drill bit
perpendicular to the face of the cylinder while drilling.
Remove as much of the broken pins and springs as
possible. Insert a screwdriver into the keyway and turn
to unlock.
040500

35T00-069-00

2000 HPC, Inc. Schiller Park, IL 60176 USA www.hpcworld.com

You might also like