Semester

Subject

Subject Code

Text Book

Data Handbook

1. B.S. Grewal, Higher Engineering Mathematics, Latest edition, Khanna

Publishers
ENGINEERING MATHEMATICS III

10MAT31
2. Erwin Kreyszig, Advanced Engineering Mathematics, Latest edition, Wiley
Publications.

MATERIAL SCIENCE AND

METALLURGY

1. Foundations of Materials Science and Engineering, Smith, 4th Edition McGraw

Hill, 2009
10ME32A /42A
2. Materials Science, Shackleford., & M. K. Muralidhara, Pearson Publication
2007.

MECHANICAL MEASUREMENTS AND

10ME32B /42B
METROLOGY

1. Mechanical Measurements, Beckwith Marangoni and Lienhard, Pearson

Education, 6th Ed., 2006.
2. Engineering Metrology, R.K. Jain, Khanna Publishers, 1994.

1. Basic Engineering Thermodynamics, A.Venkatesh, Universities Press, 2008

BASIC THERMODYNAMICS

III SEMESTER

10ME33

2. Basic and Applied Thermodynamics, P.K.Nag, 2nd Ed., Tata McGraw Hill Pub.
2002

MECHANICS OF MATERIALS

10ME34

1. "Mechanics of Materials", by R.C.Hibbeler, Prentice Hall. Pearson Edu.,

2005
2. "Mechanics of materials", James.M.Gere, Thomson, Fifth edition 2004.
3. "Mechanics of materials", in SI Units, Ferdinand Beer & Russell Johston,
5th Ed., TATA McGraw Hill- 2003.

MANUFACTURING PROCESS I
(FUNDAMENTALS OF FOUNDRY
& WELDING)

10ME35

1. Manufacturing Process-I, Dr.K.Radhakrishna, Sapna Book House, 5th

Revised Edition 2009.
2. Manufacturing & Technology: Foundry Forming and Welding,
P.N.Rao, 3rd Ed., Tata McGraw Hill, 2003.

COMPUTER AIDED MACHINE

DRAWING

10ME36A/
10ME46A

1. 'A Primer on Computer Aided Machine Drawing-2007, Published by

VTU, Belgaum.
2. 'Machine Drawing', N.D.Bhat & V.M.Panchal

FLUID MECHANICS

10ME36B / 46B

1. Fluid Mechanics, Oijush.K.Kundu, IRAM COCHEN, ELSEVIER, 3rd Ed.

2005.
2. Fluid Mechanics, Dr. Bansal, R.K.Lakshmi Publications, 2004.

METALLOGRAPHY AND MATERIAL

TESTING LABORATORY
MECHANICAL MEASUREMENTS AND
METROLOGY LABORATORY
FOUNDRY AND FORGING
LABORATORY
MACHINE SHOP

2. Properties of Refrigerant & Psychometric (tables & Charts in SI

Units), Dr. S.S. Banwait, Dr. S.C. Laroiya, Birla Pub. Pvt. Ltd., Delhi,
2008

10MEL37A / 47A
10MEL37B / 47B
10MEL38A / 48A
10MEL38B / 48B

10MAT41

1. B.S. Grewal, Higher Engineering Mathematics, Latest edition,

Khanna Publishers
2. Erwin Kreyszig, Advanced Engineering Mathematics, Latest
edition, Wiley Publications.

APPLIED THERMODYNAMICS

10ME43

1. Basic and applied Thermodynamics, P.K. Nag, 2nd Ed., Tata

McGraw Hill Pub.Co,2002
2. Applied Thermodynamics, Rajput, Laxmi Publication
3. Applied Thermodynamics, B.K. Venkanna, Swati B. Wadavadagi,
PHI, New Delhi, 2010

KINEMATICS OF MACHINES

10ME44

1. "Theory of Machines, Rattan S.S, Tata McGraw-Hill Publishing

Company Ltd., New Delhi, and 3rd edition -2009.
2. "Theory of Machines, Sadhu Singh, Pearson Education (Singapore) Pvt.
Ltd, Indian Branch New Delhi, 2nd Edi. 2006

MANUFACTURING PROCESS II

10ME45

1. Workshop Technology, Hazara Choudhry, Vol-II, Media Promoters

& Publishers Pvt. Ltd. 2004
2. Production Technology, R.K.Jain, Khanna Publications, 2003.
3. Production Technology, HMT, Tata Mc Graw Hill, 2001.

ENGINEERING MATHEMATICS IV

1. Thermodynamic data hand book, B.T. Nijaguna.

IV SEMESTER

1. Thermodynamic data hand book, B.T. Nijaguna.

2. Properties of Refrigerant & Psychometric (tables & Charts
in SI Units), Dr. S.S. Banwait, Dr. S.C. Laroiya, Birla Pub. Pvt.
Ltd., Delhi, 2008

10AL51

1 Principles of Management P. C.Tripathi, P.N. Reddy Tata McGraw

Hill,
2 Dynamics of Entrepreneurial Development & Management Vasant
Desai - Himalaya Publishing House
3 Entrepreneurship Development Poornima. M. Charantimath Small
Business Enterprises - Pearson Education - 2006 (2 & 4).

DESIGN OF MACHINE ELEMENTS-I

10ME52

1. Mechanical Engineering Design, Joseph E Shigley and Charles R.

Mischke. McGraw Hill International edition, 6th Edition 2009.
2. Design of Machine Elements, V.B. Bhandari, Tata McGraw
Hill Publishing Company Ltd., New Delhi, 2nd Edition 2007.

ENERGY ENGINEERING

10ME53

1. Power Plant Engineering, P. K. Nag Tata McGraw Hill 2nd edn 2001.
2. Power Plant Engineering, Domakundawar, Dhanpath Rai sons. 2003

DYNAMICS OF MACHINES

10ME54

1. Theory of Machines, Sadhu Singh, Pearson Education. 2nd edition.

2007.
2. Theory of Machines, Rattan S.S. Tata McGraw Hill Publishing
Company Ltd., New Delhi, 3rd Edition, 2009.

MANUFACTURING PROCESS III

(METAL FORMING PROCESS)

10ME55

1. Mechanical metallurgy (SI units), G.E. Dieter, Mc Graw Hill

pub.2001
2. Manufacturing Process III, Dr. K.Radhakrishna, Sapna Book
House, 2009.

10ME56

1. An Introduction to Energy Conversion, Volume III, Turbo

machinery, V. Kadambi and Manohar Prasad, New Age
International Publishers, reprint 2008.
2. Turbines, Compressors & Fans, S. M. Yahya, Tata McGraw Hill
Co. Ltd., 2nd edition, 2002

MANAGEMENT AND
ENTREPRENEURSHIP

1. Design Data Hand Book, K. Lingaiah, McGraw Hill, 2nd Ed.

2. Data Hand Book, K. Mahadevan and Balaveera Reddy, CBS
Publication
3. Design Data Hand Book, H.G. Patil, I. K. International
Publisher, 2010.

V SEMESTER

TURBO MACHINES

FLUID MECHANICS AND MACHINES

10MEL57
LABORATORY
ENERGY CONVERSION
10MEL58
ENGINEERING LABORATORY

COMPUTER INTEGRATED
MANUFACTURING

10ME61

1.
2. Automation, Production system & Computer Integrated
manufacturing, M. P. Groover Person India, 2007 2nd edition.
3. Principles of Computer Integrated Manufacturing, S. Kant
Vajpayee, Prentice Hall India.

DESIGN OF MACHINE ELEMENTS II 10ME62

1. Mechanical Engineering Design, Joseph E Shigley and Charles R.

Mischke. McGraw Hill International edition, 6th Edition 2003.
2. Design of Machine Elements, V. B Bhandari, Tata McGraw Hill
Publishing Company Ltd., New Delhi, 2nd Edition 2007

HEAT AND MASS TRANSFER

10ME63

1. Heat & Mass transfer, Tirumaleshwar, Pearson education 2006

2. Heat transfer-A basic approach, Ozisik, Tata McGraw Hill 2002

FINITE ELEMENT METHODS

10ME64

1. Finite Elements in Engineering, T.R.Chandrupatla, A.D Belegunde,

3rd Ed PHI.
2. Finite Element Method in Engineering, S.S. Rao, 4th Edition,
Elsevier, 2006.

MECHATRONICS &
MICROPROCESSOR

10ME65

1. Mechatronics, W.Bolton, Longman, 2Ed, Pearson Publications,

2007.
2. Microprocessor Architecture, Programming And Applications
With 8085/8085A, R.S. Ganokar, Wiley Eastern.

VI SEMESTER

HEAT & MASS TRANSFER

10MEL67
LABORATORY
COMPUTER AIDED MODELING AND
10MEL68
ANALYSIS LABORATORY
ELCTIVE

1. Design Data Hand Book , K. Lingaiah, McGraw Hill, 2nd Ed.

2. Data Hand Book, K. Mahadevan and Balaveera Reddy, CBS
Publication
3. Design Data Hand Book, H.G. Patil, I. K. International
Publisher, 2010.

ENGINEERING ECONOMY

10ME71

1. Engineering Economy, Riggs J.L., 4TH ed. , McGraw Hill, 2002

2. Engineering Economy, Thuesen H.G. PHI , 2002

MECHANICAL VIBRATIONS

10ME72

1. Mechanical Vibrations, S. S. Rao, Pearson Education Inc, 4th

edition, 2003.
2. Mechanical Vibrations, V. P. Singh, Dhanpat Rai & Company, 3rd
edition, 2006.

HYDRAULICS AND PNEUMATICS

10ME73

1. Fluid Power with Applications, Anthony Esposito, Sixth edition,

Pearson Education, Inc, 2000.
2. 'Pneumatics and Hydraulics', Andrew Parr, Jaico Publishing Co

OPERATION RESEARCH

10ME74

1. Operations Research, P K Gupta and D S Hira, Chand

Publications, New Delhi - 2007
2. Operations Research, Taha H A, Pearson Education

DESIGN LABORATORY
CIM & AUTOMATION LAB
ELECTIVE-II
ELECTIVE-III

10MEL77
10MEL78

OPERATION MANAGEMENT

10ME81

1. Production and Operations Management, William J Stevenson,

9th Ed., Tata McGraw Hill.
2. Operations Management-Theory and Practice, B Mahadevan,
Pearson Education, 2007.

10ME82

1. Modern Control Engineering, Katsuhiko Ogatta, Pearson

Education,2004.
2. Control Systems Principles and Design, M.Gopal, 3rd Ed.,
TMH,2000.

VII SEMESTER

VIII SEMESTER

CONTROL ENGINEERING

ELECTIVE-IV

Reference Book
1. B.V. Ramana, Higher Engineering Mathematics, Latest edition, Tata Mc.
Graw Hill Publications.
2. Peter V. ONeil, Engineering Mathematics, CENGAGE Learning India Pvt
Ltd.Publishers.
1. An Introduction to Metallurgy; Alan Cottrell, Universities Press India
Oriental Longman Pvt. Ltd., 1974.
2. Engineering Materials Science, W.C.Richards, PHI, 1965
3. Physical Metallurgy; Lakhtin, Mir Publications
4. Materials Science and Engineering, V.Raghavan , PHI, 2002
5. Elements of Materials Science and Engineering, H. VanVlack, AddisonWesley Edn., 1998
6. Materials Science and Engineering,William D. Callister Jr., John Wiley &
Sons. Inc, 5th Edition, 2001.
7. The Science and Engineering of Materials, Donald R. Askland and
Pradeep.P. Phule, Cengage Learning, 4lh Ed., 2003.
1. Engineering Metrology, I.C. Gupta, Dhanpat Rai Publications,
Delhi.
2. Mechanical Measurements, R.K. Jain Khanna Publishers, 1994
3. Industrial Instrumentation, Alsutko, Jerry. D. Faulk, Cengage
Asia Pvt. Ltd. 2002.
4. Measurement Systems Applications and Design, Ernest O.
Doebelin, 5th Ed., McGraw Hill Book Co.
5. Metrology & Measurement, Anand K. Bewoor & Vinay A.
Kulkarni, Tata McGraw Hill Pvt. Ltd., New-Delhi
1. Thermodynamics, An Engineering Approach, Yunus A.Cenegal and Michael
A.Boles, Tata McGraw Hill publications, 2002
2. Engineering Thermodynamics, J.B.Jones and G.A.Hawkins, John Wiley and
Sons..
3. Fundamentals of Classical Thermodynamics, G.J.Van Wylen and
R.E.Sonntag, Wiley Eastern.
4. An Introduction to Thermodynamcis, Y.V.C.Rao, Wiley Eastern, 1993,
5. B.K Venkanna, Swati B. Wadavadagi Basic Thermodynamics, PHI, New
Delhi, 2010

1. "Strength of Materials", S.S. Rattan, Tata McGraw Hill, 2009

2. "Strength of Materials", S.S.Bhavikatti, Vikas publications House -1
Pvt. Ltd., 2nd Ed., 2006.
3. "Mechanics of Materials", K.V. Rao, G.C. Raju, First Edition, 2007
4. "Engineering Mechanics of Solids", Egor.P. Popov, Pearson Edu.
India, 2nd, Edition, 1998.
5. "Strength of Materials", W.A. Nash, 5th Ed., Schaums Outline
Series, Fourth Edition-2007.
1. Process and Materials of Manufacturing, Roy A Lindberg, 4th Ed.
Pearson Edu. 2006.
2. Manufacturing Technology, Serope Kalpakjian, Steuen. R.
Sechmid, Pearson Education Asia, 5th Ed. 2006.
1. 'A Text Book of Computer Aided Machine Drawing', S. Trymbaka
Murthy, CBS Publishers, New Delhi, 2007
2. 'Machine Drawing, K.R. Gopala Krishna, Subhash Publication.
3. 'Machine Drawing with Auto CAD', Goutam Pohit & Goutham
Ghosh, 1st Indian print Pearson Education, 2005
4. 'Auto CAD 2006, for engineers and designers', Sham Tickoo.
Dreamtech 2005
5. 'Machine Drawing', N. Siddeshwar, P. Kanniah, V.V.S. Sastri,
published by Tata McGraw Hill,2006
1. Fluid Mechanics and hydraulics, Dr.Jagadishlal: Metropolitan Book
Co-Ltd., 1997.
2. Fluid Mechanics (SI Units), Yunus A. Cengel John M.Oimbala, 2nd
Ed., Tata McGraw Hill, 2006.
3. Fluid Mechanics, John F.Douglas, Janul and M.Gasiosek and john
A.Swaffield, Pearson Education Asia, 5th ed, 2006
4. Fluid Mechanics and Fluid Power Engineering, Kumar.D.S, Kataria
and Sons., 2004
5. Fluid Mechanics -. Merle C. Potter, Elaine P.Scott. Cengage learning

1. B.V. Ramana, Higher Engineering Mathematics, Latest edition, Tata

Mc. Graw Hill Publications.
2. Peter V. ONeil, Engineering Mathematics, CENGAGE Learning
India Pvt Ltd.Publishers.
1. Thermodynamics , An engineering approach, Yunus, A. Cengel and
Michael A.Boies, 6th Ed., Tata McGraw Hill pub. Co., 2002,
2. Fundamental of Classical Thermodynamics, G.J. Van Wylen and R.E.
Sontang Wiley eastern.
1. Theory of Machines & Mechanisms", J.J. Uicker, , G.R. Pennock, J.E.
Shigley. OXFORD 3rd Ed. 2009.
2. Mechanism and Machine theory, Ambekar, PHI, 2007
1. Manufacturing Science, Amitabha Ghosh and Mallik, affiliated East
West Press, 2003.
2. Fundamentals of Metal Machining and Machine Tools, G.
Boothroyd, McGraw Hill, 2000.

1 Management Fundamentals - Concepts, Application, Skill

Development - Robers Lusier - Thomson
2 Entrepreneurship Development - S.S.Khanka - S.Chand & Co.
3 Management - Stephen Robbins - Pearson Education/PHI - 17th
Edition, 2003.

1. Machine Design, Robert L. Norton, Pearson Education Asia, 2001.

2. Design of Machine Elements, M. F. Spotts, T. E. Shoup, L. E.
Hornberger, S. R. Jayram and C. V. Venkatesh, Pearson Education,
2006.
3. Machine Design, Hall, Holowenko, Laughlin (Schaums
Outlines series) Adapted by S.K. Somani, Tata McGraw Hill
Publishing Company Ltd., New Delhi, Special Indian Edition, 2008.
4. Fundamentals of Machine Component Design, Robert C. Juvinall
and Kurt M Marshek, Wiley India Pvt. Ltd., New Delhi, 3rd Edition,
2007.

1. Power Plant Engineering, R. K. Rajput, Laxmi publication, New

Delhi.
2. Principles of Energy conversion, A. W. Culp Jr., McGraw Hill. 1996
3. Non conventional Energy sources, G D Rai Khanna Publishers.
4. Non conventional resources, B H Khan TMH - 2007

1. Theory of Machines & Mechanisms", J.J. Uicker, , G.R.

Pennock, J.E. Shigley. OXFORD 3rd Ed. 2009
2. Mechanism and Machine Theory, A.G.Ambekar PHI, 2007

1. Materials and Processes in Manufacturing, E.paul, Degramo, J.T.

Black, Ronald, A.K. Prentice -hall of India 2002
2. Principles of Industrial metal working process, G.W. Rowe, CBSpub.
2002
3. Manufacturing Science, Amitabha Ghosh & A.K. Malik - East Westpress 2001
4. Technology of Metal Forming Process, Surendra kumar, PHI 2008
1. Principals of Turbomachines, D. G. Shepherd, The Macmillan
Company (1964).
2. Fluid Mechanics & Thermodynamics of Turbomachines, S. L. Dixon,
Elsevier (2005).
3. Turbomachine, B.K.Venkanna PHI, New Delhi 2009.
4. Text Book of Turbomachines, M. S. Govindgouda and A. M. Nagaraj,
M. M. Publications, 4Th Ed, 2008.

1. Computer Integrated Manufacturing, J. A. Rehg & Henry. W.

Kraebber.
2. CADlCAM by Zeid, Tata McGraw Hill.

1. Machine Design, Robert L. Norton, Pearson Education Asia, 2001.

2. Design of Machine Elements, M. F. Spotts, T. E. Shoup, L. E.
Hornberger, S. R. Jayram and C. V. Venkatesh, Pearson Education,
2006.
3. Machine Design, Hall, Holowenko, Laughlin (Schaums
Outlines series) Adapted by S.K. Somani, Tata McGraw Hill
Publishing Company Ltd., New Delhi, Special Indian Edition, 2008.
4. Machine Design, A CAD Approach: Andrew D DIMAROGONAS,
John Wiley Sons, Inc, 2001.
1. Heat transfer, a practical approach, Yunus A- Cengel Tata Mc Graw
Hill
2. Principles of heat transfer, Kreith Thomas Learning 2001
3. Fundamentals of heat and mass transfer, Frenk P. Incropera and
David P. Dewitt, John Wiley and sons.
4. Heat transfer, P.K. Nag, Tata McGraw Hill 2002.
1. Finite Element Methods for Engineers U.S. Dixit, Cengage
Learning, 2009
2. Concepts and applications of Finite Element Analysis, R.D. Cook D.S
Maltus, M.E Plesha, R.J.Witt, Wiley 4th Ed, 2009
3. Finite Element Methods, Daryl. L. Logon, Thomson Learning 3rd
edition, 2001.
4. Finite Element Method, J.N.Reddy, McGraw -Hill International
Edition.
1. Mechatronics and Microprocessors, K.P.Ramchandran,
G.K.Vijayraghavan, M.S.Balasundran, Wiley, 1st Ed, 2009
2. Mechatronics - Principles, Concepts and applications Nitaigour
and Premchand Mahilik - Tata McGraw Hill- 2003.
3. Mechatronics Principles & applications, Godfrey C. Onwubolu,
Elsevier. .
4. Introduction Mechatronics & Measurement systems, David.G.
Aliciatore & Michael. B. Bihistaned, Tata McGraw Hill, 2000.

1. Engineering Economy, Tarachand, 2000.

2. Industrial Engineering and Management, OP Khanna, Dhanpat Rai &
Sons. 2000
3. Financial Mangement, Prasanna Chandra, 7th Ed., TMH, 2004
4. Finacial Management, IM PANDEY, Vikas Pub. House, 2002

1. Theory of Vibration with Applications, W. T. Thomson, M. D. Dahleh

and C. Padmanabhan, Pearson Education Inc, 5th edition, 2008.
2. Mechanical Vibrations: S. Graham Kelly, Schaums outline Series,
Tata McGraw Hill, Special Indian Edition, 2007.
3. Theory and Practice of Mechanical Vibrations: J. S. Rao & K. Gupta,
New Age International Publications, New Delhi, 2001.
4. Mechanical Vibrations, G. K.Grover, Nem Chand and Bros, 6th
edition, 1996.

1. 'Oil Hydraulic systems', Principles and Maintenance S. R. Majurr,

Tata McGraw Hill Publishing Company Ltd. - 2001
2. 'Industrial Hydraulics', Pippenger, Hicks" McGraw Hill, New York
3. 'Hydraulic & Pneumatic Power for Production', Harry L. Stewart
4. 'Pneumatic Systems', S. R. Majumdar, Tata McGraw Hill Publish
1995
5. Power Hydraulics' Michael J Pinches & John G Ashby, Prentice Hall

1. Operations Research, A P Verma, S K Kataria &Sons, 2008

2. Operations Research, Paneerselvan, PHI
3. Operations Research, A M Natarajan, P Balasubramani, Pearson
Education, 2005
4. Introduction to Operations Research, Hillier and Liberman,8th Ed.,
McGraw Hill
5. Operations Research S.D. Sharma, Ledarnath Ramanath & Co, 2002

1. Production and Operations Management, Norman Gaither & Greg

Frazier,
2. Operations Management for Competitive Advantage, R.B.Chase,
N.J.Aquilino, F. Roberts Jacob; McGraw Hill Companies Inc., Ninth
Edition.
3. Production & Operations Management, Everett E.Adams, Ronald
J.Ebert, Prentice Hall of India Publications, Fourth Edition.
4. Production / Operations Management, Joseph G Monks, McGraw
Hill Books
1. Modern Control Systems, Richard.C.Dorf and Robert.H.Bishop,
Addison Wesley,1999
2. System dynamics & control, Eronini-Umez, Thomson Asia pte Ltd.
singapore, 2002.
3. Feedback Control System, Schaums series. 2001.