Scribd
Upload
127 views

Kart 10

The document provides assembly instructions and measurements for a wooden push cart in three steps. It instructs to nail and glue the bonnet assembly to the upper chassis, insert two bolts to secure the front axles by attaching the upper chassis to the lower chassis, and attach and bolt the brake lever which is made of two rounded and shaped pieces of timber.

Uploaded by

Antônio Castro
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
127 views

Kart 10

The document provides assembly instructions and measurements for a wooden push cart in three steps. It instructs to nail and glue the bonnet assembly to the upper chassis, insert two bolts to secure the front axles by attaching the upper chassis to the lower chassis, and attach and bolt the brake lever which is made of two rounded and shaped pieces of timber.

Uploaded by

Antônio Castro
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

80mm

3.150in

200mm
7.874in

300mm
11.811in

8mm
0.315in

FIRST: Attach the Bonnet Assembly to the Upper Chassis Assembly


Nail the Bonnet Assembly to the Upper Chassis & Glue

THIRD: Attach the Brake Lever and bolt in place.


36mm
1.417in

SECOND: Attach the Upper Chassis Assembly to the Lower Chassis Assembly
Insert the two bolts to secure the Steering Wishbones (front axles).

46mm
1.811in

100.30mm
3.949in

110mm
4.331in

24mm
0.945in

The Brake Lever is to be made from two 18mm [3/4in] thick pieces of timber
nailed and glued together. The top of the Lever is to be rounded and shaped as
smoothly as possibly. Use a wood chisel, file/rasp and sandpaper to shape.

50mm
1.969in

PROPRIETARY AND CONFIDENTIAL

THE INFORMATION CONTAINED IN THIS


DRAWING IS THE SOLE PROPERTY OF THE
DESIGNER. ANY REPRODUCTION IN PART OR
AS A WHOLE WITHOUT THE WRITTEN
PERMISSION OF THE DESIGNER IS PROHIBITED.

kartbuilding.net
TITLE: FINAL ASSEMBLY
MATERIAL AS SPECIFIED
FILE NAME: WOODEN-PUSH-CART
SCALE:1:20 DESIGNER: STEPHEN BURKE

DATE: 26/10/2010
SIZE: A4

REV. 1

SHEET 10 OF 10

You might also like