Scribd
Upload
76 views

BTEC-915 Electromagnetic Interference & Compatibility

This document provides an overview of the course BTEC-915 Electromagnetic Interference & Compatibility. The course is worth 100 total marks, with 40 marks from internal assessments and 60 from external assessments. The course contains 4 units that cover topics such as the concepts of EMI/EMC, coupling principles of electromagnetic emissions, radiated and conducted interference measurements, and techniques for controlling EMI.

Uploaded by

gpsonline
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
76 views

BTEC-915 Electromagnetic Interference & Compatibility

This document provides an overview of the course BTEC-915 Electromagnetic Interference & Compatibility. The course is worth 100 total marks, with 40 marks from internal assessments and 60 from external assessments. The course contains 4 units that cover topics such as the concepts of EMI/EMC, coupling principles of electromagnetic emissions, radiated and conducted interference measurements, and techniques for controlling EMI.

Uploaded by

gpsonline
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

BTEC-915 Electromagnetic Interference & Compatibility

Internal Marks : 40
External Marks : 60
Total Marks
: 100

L
3

T
1

P
0

Unit-I Overview of EMI/EMC:


Electromagnetic environment, History, Concepts and definitions, Overview of EMI/EMC, Natural
and Nuclear sources of EMI, conducted and radiated EMI, Transient EMI, Time domain Vs
Frequency domain EMI, Units of measurement parameters.
Unit-II EMI Coupling Principles:
Electromagnetic emissions, noise from relays and switches, Nonlinearities in circuits, passive intermodulation, cross talk in transmission lines, transients in power supply lines, Conducted, Radiated
and Transient Coupling, Common Impedance Ground Coupling, Radiated Common Mode and
Ground Loop Coupling, Radiated Differential Mode Coupling, Cable to Cable Coupling, Power
Mains and Power Supply coupling.
Unit-III Radiated and Conducted Interference Measurements:
EMI Test Instruments/ Systems, Anechoic chamber, TEM cell, GH TEM Cell, characterization of
conduction currents/voltages, conducted EM noise on power lines, conducted EMI from equipment,
Immunity to conducted EMI, detectors and measurements, EMI Shielded Chamber, Open Area Test
Site, TEM Cell, Sensors/ Injectors/ Couplers, Test beds for ESD and EFT.
Unit-IV EMI Control Techniques:
Principles and types of grounding, shielding and bonding, characterization of filters, power lines
filter design shielding, Isolation Transformer, Transient Suppressors, Cable Routing, Signal Control,
Component Selection and Mounting, PCB Traces Cross Talk, Impedance Control, Power
Distribution Decoupling, Zoning, Motherboard Designs and Propagation Delay Performance
Models.
Reference Books:
1. V.P.Kodali, "Engineering EMC Principles, Measurements and Technologies", IEEE Press,1996.
2. Henry W.Ott, "Noise Reduction Techniques in Electronic Systems", John Wiley and Sons, New
York, 1988.
3. C.R.Paul, Introduction to Electromagnetic Compatibility , John Wiley and Sons, Inc, 1992
4. Bernhard Keiser, "Principles of Electromagnetic Compatibility", Artech house, 3rd Ed, 1986.

You might also like