Scribd
Upload
139 views

Hvac System Commissioning: Heat Exchanger Pre Inspection Checklist & Tab Report

This document contains a heat exchanger pre-inspection checklist and testing & balancing report for an HVAC system at the Hadeed – Iron & Steel Plant District Cooling project. The checklist verifies that the heat exchanger was installed correctly and lists test results. The balancing report provides design and actual test data for water flow, pressure drop, temperature drop, and heat exchanged for the primary and secondary water sides of Unit 1. It is signed by representatives from the commissioning team, consultant, contractor, and operations & maintenance.

Uploaded by

Mudassar Idris Raut
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
139 views

Hvac System Commissioning: Heat Exchanger Pre Inspection Checklist & Tab Report

This document contains a heat exchanger pre-inspection checklist and testing & balancing report for an HVAC system at the Hadeed – Iron & Steel Plant District Cooling project. The checklist verifies that the heat exchanger was installed correctly and lists test results. The balancing report provides design and actual test data for water flow, pressure drop, temperature drop, and heat exchanged for the primary and secondary water sides of Unit 1. It is signed by representatives from the commissioning team, consultant, contractor, and operations & maintenance.

Uploaded by

Mudassar Idris Raut
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

HVAC SYSTEM COMMISSIONING

HEAT EXCHANGER PRE INSPECTION CHECKLIST &


TAB REPORT
Project Title

Hadeed Iron & Steel Plant District Cooling

System

Building Name

Unit Tag No.

Building No.

Unit Model

Unit Location

Unit Serial No.

Area Served Model

SECTION A HEAT EXCHANGER PREINSPECTION CHECKLIST


A.
NO.

DESCRIPTION

RESULTS SATISFACTORY

REMARKS

PRE INSPECTION CHECK

1.1

Shipping protective covers are detached

YES NO

1.2

Installation is as per approved drawings

YES NO

1.3

Valves & test ports are installed as per approved


drawings

YES NO

1.4

Valves are in fully open position

YES NO

1.5

Temperature and Pressure gauges are installed at inlet


and out let near the heat exchanges.

YES NO

1.6

Strainer (if required) is installed in the inlet line in correct


direction

YES NO

1.7

System is hydrostatically tested and is free from leaks.

YES NO

1.8

Hydronic system has been flushed and cleaned on both


primary and secondary side

YES NO

1.9

Temperature and Pressure gauges are indicating the


working parameter upon water circulation

YES NO

1.10

No abnormal noise or vibrations are detected

YES NO

1.11

IOM manuals are available and reviewed

YES NO

Page:1 OF 2

FORM NO: ZCC-HD-1032

HVAC SYSTEM COMMISSIONING


HEAT EXCHANGER PRE INSPECTION CHECKLIST &
TAB REPORT
Project Title

Hadeed Iron & Steel Plant District Cooling

System

Building Name

Unit Tag No.

Building No.

Unit Model

Unit Location

Unit Serial No.

Area Served Model

SECTION B HEAT EXCHANGER TESTING & BALANCING REPORT


UNIT DATA

UNIT NO. 1

UNIT DESIGNATION
LOCATION
SERVICE
MANUFACTURER
MODEL
SERIAL NO.
PRIMARY WATER SIDE
TEST DATA

DESIGN

ACTUAL

WATER FLOW LPS


PRESSURE DROP KPa
TEMP. DROP OC
HEAT EXCHANGED KW
SECONDARY WATER SIDE
TEST DATA

DESIGN

ACTUAL

WATER FLOW LPS


PRESSURE DROP KPa
TEMP. DROP OC
HEAT EXCHANGED KW
REPRESENTITIVE

DATE

NAME

SIGNATURE

COMMISSIONING TEAM
CONSULTANT (SUHAIMI)
ZAMIL INDUSTRIAL GROUP
OPERATION & MAINTENANCE

Page:2 OF 2

FORM NO: ZCC-HD-1032

You might also like