Scribd
Upload
522 views

CARPROG Lexus Immo Manual

This document provides instructions for programming transponder keys for various Lexus vehicle models and immobilizer systems. It lists Lexus models from 1997-2004 and their corresponding transponder key type and instruction section. The instruction sections describe the location of the transponder data - whether in a separate immobilizer box, motor ECU, or immobilizer ECU - and the steps to program a new key which involve shorting the quartz resonator or removing the EEPROM chip from the circuit board.

Uploaded by

Jorge Antonio Guillen
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
522 views

CARPROG Lexus Immo Manual

This document provides instructions for programming transponder keys for various Lexus vehicle models and immobilizer systems. It lists Lexus models from 1997-2004 and their corresponding transponder key type and instruction section. The instruction sections describe the location of the transponder data - whether in a separate immobilizer box, motor ECU, or immobilizer ECU - and the steps to program a new key which involve shorting the quartz resonator or removing the EEPROM chip from the circuit board.

Uploaded by

Jorge Antonio Guillen
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

S4.

2 CarProg LEXUS immobiliser manual

Lexus model
ES300
ES330
GS300
GS300
GS400
GX470
IS200
IS300
LS200
LS400
LX450
LX470
RX300
RX330
SC300
SC400
SC430

Year
1998-2001
2002-2004
200419981998-2000
200120042000-2004
2000-2004
1997-1999
19991997-1999
19991997-1999
19991999-2004
2005199919991997-1999
19991997-1999
19992004-

Transponder key type


TEX
TEX
TEX/CR
TEX
TEX
TEX
TEX/CR
TEX
TEX
TEX
TEX
TEX
TEX
TEX
TEX
TEX
TEX/CR
TEX
TEX/CR
TEX
TEX
TEX
TEX
TEX/CR

Instruction
S4.2.1
S4.2.2
S4.2.3
S4.2.1
S4.2.2
S4.2.1
S4.2.3
S4.2.2
S4.2.2
S4.2.1
S4.2.2
S4.2.1
S4.2.2
S4.2.1
S4.2.2
S4.2.2
S4.2.3
S4.2.2
S4.2.3
S4.2.1
S4.2.2
S4.2.1
S4.2.2
S4.2.3

S4.2.1 Older Lexus immobiliser system with separated immo box and Texas transponder (4D
by Silca). Immobiliser box are located near to ignition key. Usually this is black or brown box
marked immobilizer or 134.2 kHz.

Remove immobiliser ECU from the car and open it. Find 93C66 EEPROM in DIP package. Use
A5 or A4 adapter and follow CarProg instruction to program transponder key. Short quartz
resonator for in-circuit EEPROM programming or remove 93C66 from immobiliser board.

S4.2.2 Lexus immobiliser system with transponder antenna and AMP unit on the ignition key
and motor ECU. Used in 1999 2003 Lexus cars.

Transponder information is stored in motor ECU. Remove motor ECU from the car, open it
and find 93C56 EEPROM marked IC900
Use A6 or A4 adapter and follow CarProg instruction to program transponder key. Short
quartz resonator for in-circuit EEPROM programming or remove 93C56 from ECU board.

S4.2.3 New Lexus cars with Texas Crypto transponder (4D by Silca). Transponder key is
stored in separated immobiliser unit marked ECU IMMOBILIZER. Remove immobiliser ECU
from the car, open it and find 93LC66 SMD EEPROM.

Use only original factory key. With Silca 4D transponder car will not start.
Use A6 or A4 adapter and follow CarProg instruction to program transponder key.
Short quartz resonator for in-circuit EEPROM programming or remove 93C66 from immobiliser
board.

You might also like