EPCON ELECTRO - PNEUMATIC CONTROLLEREPCO Electro-Pneumatic Controller Ourune The BY EPCON Electro-Pneumatic Controller utlizes the latest digital technology to provide the most accurate and reliable electronic control system. It provides all the latest electronic control functions with simplicity and reliability of a pneumatic controller. The unnecessary cost and complexity of external power supplies, I/P transducers and valve positioners could be eliminated with this controller. Tne BY EPCON Controller is designed for broad applications, and the perfect choice for stand-alone, single- loop control applications, It provides a simple and reliable solution over conventional electronic control systems as far as the accurate and reliable control operation are concerned. Applicable field of this controller includes the plants in chemical, petrochemical, pharmaceutical, power generation, steels, food process, pulp and paper, textile ‘and other industries as well as the utility systems in school, hospital, and commercial building. The BY EPCON Controller is electro-pneumatic controller that can be used in a wide range of control applications. The controller accepts input signals from any 4 to 20 mA transmitter, and controls process variables such as pressure, temperature, liquid level and flow rate in steam, air and other fluid systems. The controller accommodates a maximum of 100 psi output to control pneumatic diaphragm or piston actuator without using valve positioners or VP transducers. The BY EPCON Controler operates on 110/220V AC (50/60 Hz) or 24V OC supply, and displays up to 16 characters. 2 lines, minimum 4 (10.0 mm) back-it digit display indicating various parameters such as set point (SP), process value (PV), control range (min/max), directireverse action, KP, KI, KD values etc.. AUTO/MANUAL mode is selected with an external toggle switch. Actuator can be manually vented or loaded on MANUAL mode. Basically there is no air consumption under steady-state condition. SPECIFICATIONS Supply Voltage 110/220 AC So/GoHz, 24V DC (Operating Voltage Range 90 ~ 110% of Fated Voltage: Power Consumption 12 Wimax), 9W(steady state) Input 4-20 mA ‘Output 4-20 mA standard, 5% span accuracy Control Action Direct or Reverse Control Method P, PL PID. Local Set Point Adjustment Push Button Switches and Digital Display Remote Set Point Adjustment 4-20mA Standard Input Display Modes Process Value (PV), Sat Point (SP), Deviation (DEV) Max, Min, Unit and ete Communication Approaching various parameters and displaying the results using RS 2320 Troubleshooting Service Mode, LED Display for error Air Supply 300 psi Max. Air Output Zero ~ Maximum Supply Pressure ‘Air Consumption Zero at steady state conditions ‘Accuracy 0.5% of Full Span Input Resistance to Current Loop 1009 xCurrency + 0.7V Ambient Temperature Rating -30 ~ 60. Dimensions 205(W) x 260(D) x 190(H)an Enclosure NEMA 4 x PolycarbonateFeatures + electronic control with the latest Digital Signal Process (DSP) +P, Pl, PID tuning functions. + Internal 24V DC power is provided for 4-20 mA transmitter. + Sel-diagnostic and error indicating functions. + Visual indications for Process Value (PV), Set Point (SP), Deviation (DEV), Min/Max Sensor Values (control range), etc. + Process Value (PV) can be remotely monitored through 4-20 mA interface. + Power fail-safe mode provides either actuator load or vent options. + Non-volatile memary stores all the set points for auto restart and resumes a normal operation once the power is restored. Electro-Pneumatic Controller EPCON CONTROL SCHEMATIC venom EPCON Evectronics }* + Universal unit entry allows to choose any one of pre-programmed Units or custom units. Generat SPECIFICATION Conventional Electronic Control System [Control valve BY Electronic controller Air Filter Regulator IP Convertor B) Transmitter Power Supply BY EPCON Control System WContrl Valve |EPCON Controller Air Fier Regulator Transmiter, Power Supply and powor supply and cost-effective = Note The BY EPCON contrller does nat require positioner, UP converter, This maans that EPCON contol is more retable TYPICAL APPLICATIONS '» PRESSURE CONTROL ‘land seal system, steam generating system, Process system, ec = TEMPERATURE CONTROL boilrfeed water, uo os, process ids, ot = LEVEL CONTROL ums, columns, storage tanks, et = FLOW CONTROL, cooing medium low, process flow, te.EPCON Electro-Pneumatic Controller ENCLOSURE . ‘Material : NEMA 4, Polycarbonate ee BY EPCON Purpose intemal cc protecton \ ‘tom extemal elements and impacts AIR FILTER REGULATOR Rui ear pressure fo: opial LD DISPLAY ] performance of solenoid vale Back ciple for vaios operational parameters, suchas PV, SP, Uns, UP/DOWN CHANGE BUTTON ation tc i ‘Change the vale of parameters chosen MODE SELECT BUTTON o— é by MODE SELECT Normal Mode PD value input LOAD/VENT BUTTON action selection, ec Sonvice Mode : check on ier = ‘ Used fr air pressure contol in actuator circuit operation status in case of MANUAL MODE Parameter Mode : changeable ater inal input value AUTO/MANUAL SELECTOR SWITCH (Change AUTOIMANUAL modes POWER LED Light when power on ourpur GAUGE "Measure ouput pressure supplied to actuator ERROR LED Light when error or malfunction __SIGNAL INPUT. ‘occur during operation “POWER SUPPLY (CHANGE DIGIT KNOB. ‘Alls to change digt by turing the kneb ENCLOSURE DIMENSIONS Options + Actuator vent on power failure * Double-acting cylinder controller * Communicator ( RS 232C } Accessories + Pressure Transmitter max 5000psi standard, 4-20mA output + Differential Pressure Transmitter, 4-20mA output + Temperature Transmitter, 4-20mA output + Level transmitter, 4-20mA output + Al Filter Regulators @sy etre 8502 Cheengeheor,Chvernyeon, Khao ty, Kyecnanan, Koes Prone (55) ME6HOW Faxst2 (55) 3456115. hio:ifoycon.koreasme.com E-mail:bycon@hitel net