Scribd
Upload
163 views5 pages

Alcatel Omnipcx 4400: Subsection 14 Cstatrk

This document provides information about the "cstatrk" command in the Alcatel 4400-CCD application. The cstatrk command is used to indicate for each trunk group or logical link whether it is subject to supervision by CSTA. Running the cstatrk command will display the numbers of each trunk group and indicate with a "T" or "F" whether it is supervised by CSTA or not. The cstatrk command followed by a trunk group number or logical link number also indicates its supervision status.

Uploaded by

maverick11
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
163 views5 pages

Alcatel Omnipcx 4400: Subsection 14 Cstatrk

This document provides information about the "cstatrk" command in the Alcatel 4400-CCD application. The cstatrk command is used to indicate for each trunk group or logical link whether it is subject to supervision by CSTA. Running the cstatrk command will display the numbers of each trunk group and indicate with a "T" or "F" whether it is supervised by CSTA or not. The cstatrk command followed by a trunk group number or logical link number also indicates its supervision status.

Uploaded by

maverick11
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

A L C T E L

Alcatel OmniPCX 4400

SUBSECTION 14

cstatrk

Ed.01a
A L C T E L

Alcatel OmniPCX 4400


Subsection 14 - cstatrk

Subsection 14 - cstatrk

SUMMARY

cstatrk
Use................................................................................................................. 14. 3
1. Trunck group/trunck command “cstatrk”............................................ 14. 3

Ed.01a Ref.3BA19919ENAA 14.1


A L C T E L

Alcatel OmniPCX 4400


Subsection 14 - cstatrk

14.2 Ref.3BA19919ENAA Ed.01a


A L C T E L

Alcatel OmniPCX 4400


Subsection 14 - cstatrk cstatrk
Use

44A01E05326A130AAEN

cstatrk
Use
Edition: 01a

1. Trunck group/trunck command “cstatrk”

The “cstatrk ” command is used to indicate for each trunk group or logical link in the Alcatel
4400–CCD application whether it is subject to supervision by CSTA.

(0)a4400a> cstatrk
+----------------------------------+
| trunk group number 0 | T |
+----------------------------------+
| trunk group number 4 | T |
+----------------------------------+

The display shows the numbers of each trunk group and indicates whether it is supervised by CSTA or
not (Yes=T, No=F),

The “cstatrk ” command followed by “trunck group number ” indicates whether this trunk group
is supervised or not.

The “cstatrk ” command followed “logical link number ” indicates whether this logical link is su-
pervised or not.

Ed.01a Ref.3BA19919ENAA 14.3

You might also like