OPERATING MANUAL

308/616/824/832/1264
ULTRA/COMPACT/SFX SERIES

INTRODUCTION
The operational manual has been described in two parts.
1)

Users Manual

2)

Testing Procedure for user with ISOLATION PROCEDURE

FOR JUNCTION LINES

Users Manual consists description of Station features and step by

step procedure to activate them.

SYSTEM FEATURE MAY VARY FROM MODEL TO MODEL

308/616/824/832/1264
1. USERS MANUAL
S.No.
A.
B.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.

29.
30.
31.
32.
33.
34.
35.
36.
37.
38.
39.
40.
41.

FEATURES
Quick Reference Chart
Features Explanations
Ext. To Ext. Call
To Hold A Line
Call Consult
Redial
Auto Redial
Auto Call Transfer
Barge in With Warning Tone
Barge in Without Warning Tone
Automatic Call Back On Busy EXT.
Automatic Call Back On Busy Trunk
Do Not Disturb
Call Privacy
Call Transfer
Call Forwarding
Call Pick Up
Follow Me
Boss Secretary System
Call Camp On
Call Parking
Personal Speed Dialing
Conference
Dialing From Personal Memory Bank
Dialing From Global Memory Bank
(a) From Memory Bank 1 (b) From Memory Bank 2
Emergency Reporting
Day/Night Setting
(a) Manual Setting (b) Auto Setting
Self Alarms
Cancellation of Self Alarms
Dynamic All Call Control & Autolocking:
To Lock Ext. For D.O.D.
To Cancel Dynamic Lock
To Open All Local Calls With 95 But STD/ISD Lock
Auto Locking (After 10 Seconds)
To Change Your Personal Passcode
Brokers Calls
Printing And Call Storage
Direct Inward dialing
Call Waiting (Offered By P&T Deptt.)
Door Phone
Door Lock
Forced Release Of Trunk
Hotline Release Of Trunk
Hotline Internal (Delayed)
Hotline Outward Dialing
Flash On Trunk Line
DOSA MANUAL
2.TESTING PROCEDURES FOR USER

PAGE No.
3-4
5
5
5
6
6
6
7
7
7
8
8
8
9
9
9
10
10
10
11
12
12
13
13
14
14
15
16
16
16
17
17
17
17
17
18
18
19
19
19
19
19
19
20
20
21
22

QUICK REFERENCE CHART

1. Redial
2. Call Parking
3. Parked Call Pick Up
4. Parked Call Pick Up
From Other Extn.
5. Call Pick Up Within
Same Pick Up Group
6. Conference
7. Call Pick Up From Any
Extension
8. Emergency Reporting
9. Set Night Mode
10. Set Day Mode
11. Ext. Do Not Disturb
12. Follow Me
13. Call Forwarding
14. Call Privacy
15. Cancellation of D.N.D.
Follow Me, Call Privacy
Call Forwarding
16. Storing Nos. In
Personal Memory Bank
17.
18.
19.
20.

: 12 or *
: 11 (First Hold The Line Then Dial 11)
: 16 (For Latest Parked Call)
17 (For Earliest Parked Call)
: 19 + Extn
: # or 10
: 18 (Among Upto First 4 Parked
Calls And Self)
: 14 + EXTN
:
:
:
:
:
:
:

15
112 + nitecode + 0
112 + nitecode + 1
115 (Permanently)
113 + extn.
114 + extn.
118

: 116
: 110 + (800 to 809) + Trk + External No.
where TRK is 71/72/73/74/75/76
or 0 or 9
: (800-809) Personal memory bank
: HF + get pip tone burst + 7
: HF + get pip tone burst + 8
: HF + get pip tone burst + 9

Abbreviated Dialing
Auto Call Back
Barge in With Warning
Barge in W/O Warning
(on selective extns.)
23. Dialing From Global Memory Bank
(i) For 308/616/824/840
(a) From Memory Bank 1
:
(810 - 854) (720-759)
(Can be used irrespective of class of service)
(b) From Memory Bank 2
:
(855 - 899) (760-799)
(Can be used as per class of service)
24. Set Auto redial
: 60
cancel Auto redial
: 61
25. Paging
: 70 (upto 832 Model)
: 713 (1264 Model)
: 714 (1264 Model)
3

NOTE :
For 308
Jn. Line Nos. Are From 71,72,73

Ext. Nos. Are From 20 to 27

For 412
Jn. Line Nos. Are From 71,72,73,74 Ext. Nos. Are From 20 to 31
For 616
Jn. Line Nos. Are From 71,72, ..,76 Ext. Nos. Are From 20 to 35
For 824
Jn. lines Are From 71 to 78

Ext Nos. Are From 20 to 43

For 832
Jn. lines Are From 71 to 78

Ext Nos. Are From 20 to 51

For 1264
Jn lines Are From 701 to 712

Ext nos. Are From 200 to 263

F E AT U R E S

E X P L A N AT I O N S

1. EXTENSION TO EXTENSION CALL (Ex.) :

When one extension user wishes to talk to another extension user
operate as follows :
Lift hand set, Hear Dial Tone.
Dial Extn. No., Wait for Ring back tone.
Speak when called party answers.
2. TO HOLD A LINE (extn. or trunk) :
You can hold a conversating party (extension or trunk) by the
following procedure for onward activities as call consult, call transfer,
call parking or conference.
Procedure :
During Conversation
Hook flash
You get service confirmation tone for few seconds while the
other party get MUSIC ON HOLD.
Now you can retrieve back the hold by hook flash again
3. CALL CONSULT :
It is often required to consult your colleague / staff while conversating
with an external (or internal) caller. This enables you to talk to other
extension while first party is put on HOLD WITH MUSIC and Cannot
listen your consultations.
Procedure :
Hold the line (As explained in point 2 above)
Dial another extn. no.
Talk with him/her.
FLASH AGAIN TO RETRIEVE FIRST PARTY AND
RELEASE llnd PARTY

4. REDIAL (* or 12) :
Any extension user can repeatedly dial the last number, if external,
without pressing all the numbers again. For this follow the procedure
below :
Disconnect previous call by pressing hook switch for more
than 1 second.
Lift hand set, hear dial tone
Dial * or 12.
The last dialed number will be redialled automatically. Kindly wait for
Dialing to complete and hear either the ring Back or Busy Tone from
the telephone instrument.
5. Auto redial : (Available in ULTRA SERIES ONLY)
Any extension user can automatically redial the outside number up
99 times( default 5 times )
Dial 60 to set auto redial
The system will automatically redial the external number and if
engage then try again and if it is ringing will give ring on your
extension and when you lift hand set you get connected
automatically
Dial 61 to cancel auto redial
6. Auto call transfer : (This feature requires additional CLI
Card)
The incoming call will be transferred to the desired extension number
if stored in auto redial buffer. e.g if you are having caller id facility
on trunk lines from department and you want that calls from your
home lands on your extension directly not on reception the you
can store your home number in auto redial buffer max 10 such
numbers can be stored in the buffer. (see programming manual for
details)

7. BARGE IN WITH WARNING TONE :

(on selective extns. only)
If some extension is found busy, this feature allows the extension
(calling) user to get in to the conversation of the busy extension after
getting warning tone at that extn.To use this feature operate as follows.
When you get engage tone on dialing an extn. no.
Hook flash - get confirmation tone burst for 2 secs.
Dial 8
The second party will get music and you can talk to barged
party
8. BARGE IN WITHOUT WARNING TONE :
(on selective extns. only)
If some extension is found busy, this feature allows the extension
(calling) user to get in to the conversation of the busy extension
without any warning tone. To use this feature operate as follows.
When you get engage tone on dialing an extn. on.
Hook flash - get confirmation tone burst for 2 secs.
Dial 9
Speak on during conversation
9. AUTOMATIC CALL BACK ON BUSY EXTENSION (HF + 7) :
If the called extension is found busy, this feature automatically
connects as soon as the called extension gets free.
On hearing busy tone.
Hook flash - get confirmation tone for 2 secs.
Dial 7'
As soon as called extension becomes free both extensions
will ring simultaneously.
Lift handset, hear ring back tone.
Wait for other party to answer

10. AUTOMATIC CALL BACK ON BUSY TRUNK LINE (HF + 7) :

If all/any Co. Jn. Line are/is busy, this feature informs the user as soon
as the Co. Jn. Trunk Line gets free.
If a user gets busy tone after attempting to seize any Co.
Line/Group 0/Group 9.
Hook flash - get confirmation tone for 2 secs.
Dial 7'
As soon as the desired trunk line/trunk group gets free you
get ring
Lift hand set - and you get connected to the trunk for further
dialing of external no.
11. EXT. DO NOT DISTURB (115) : (on selective extns. only)
If an extension user does not want to be called, this feature allows the
extension to protect from being called. However, the extension user
can call others.

Lift handset and hear dial tone

Dial 115.
Get assurance tone.
Hang up.
For canceling this feature operate as follows.
Lift handset and wait for dial tone.
Dial 116.
Get assurance tone.
Hang up.

12. CALL PRIVACY : (on selective extns. only)

This feature protects an extension user from barging in by any other
extension during subsequent calls.

Lift handset, get dial tone.

Dial 118.
Hang up.
For cancellation of feature operate as follow.
Lift handset, wait for dial tone.
Dial 116.
Hang up.
8

13. CALL TRANSFER (HF Ex.) :

Any internal or external call received / originated at any extension
can be transferred from that extension to any other extension.
Hook Flash and hear confirmation tone for 2-3 secs.
Dial the extension number to which you want to transfer the
call.
Wait for ring back tone. If called extension is busy than use
camp on feature described at point No. 18.
You may hang up.
You may wait for answer to announce the caller and hang up.
NOTE : In case the called extension is unattended, hang up.
The call will return back after 20 seconds automatically.
14. CALL FORWARDING (114 + EX) :
This feature allows an extension user to receive the calls at any other
extension.
Lift handset of the extension to be forwarded (diverted)
Dial 114 + Ext. No.. (To which calls are to be diverted).
Hang up.
Cancellation of this feature can be done as follows:
Lift handset, wait for dial tone.
Dial 116.
Hang up.
15. CALL PICK-UP (# /10 or 14 + Ex.) :
If another extension is ringing, this feature allows user to receive the
call at his own extension without physically moving to that particular
extension.
Lift handset of your extension and hear the dial tone.
(If the user extension number is from the same pick up group,
then simply dial # from tone phone or 10 from decadic phone).
Dial 14 followed by the (extension number) which is ringing.
Talk to the party.
9

16. FOLLOW ME (113 + EXTN.) :

Incoming calls can be made to follow the extension user. In other
words extension user cause any extension to receive incoming calls
directed at his original extension.
Lift handset where user wants to receive calls, hear dial tone.
Dial 113 + AB
(AB is the No. of the original extn. being used.)
All calls for AB will now ring at extension where above code
has been dialed.
Cancellation of Feature as follows:
Dial 116 from extension AB after getting dial tone.
Get assurance tone.
Hang up.
17. BOSS SECRETARY SYSTEM :
Any extension can route its all incoming internal & external calls
through any other extension using Call Forwarding" facility. This first
extension becomes BOSS while second extension works as
SECRETARY. All incoming calls for BOSS will land at SECRETARY
extension while only secretary is able to call the BOSS and transfer
the calls to him.
Dial 114 + Ext no
Dial 116 for cancellation
Though BOSS can dial outside directly or ask the SECRETARY to
make a call and transfer it to him.
18. CALL CAMP ON :
The feature allows an extension to transfer calls even to a busy
extension. The transferring extension becomes free after using this
feature, the call gets transferred/camped on to the busy extension.
The busy extension on which the call is transferred (camped on) gets
call waiting tone and can attend the call as soon as he finishes his
present call.
On getting busy tone while transferring call to any extn. being busy.
Hang up. (Your extn. becomes free and call is camped on.)
10

Picking up Camped call

The extension on which call is camped, can pick up the camped call
as illustrated below.
Hear the call waiting tone beep..beep. while talking.
Hook Flash and dial 11. (To park the current call)
First call is parked and second call gets through.
Finish the call and pick up the parked call.
or
Hear the call waiting tone beep..beep. while talking.
Hook Flash and dial 65.
First call is parked and second call gets through.
Again dial 65 second call is parked and first get through.
Alternatively :
You can finish up with first party after going ON HOOK.
The camped call will immediately ring at your extension.
Now pick up the handset and start conversation with camped
party.
19. CALL PARKING (HF + 11) :
(A) In case the extension desires to become free temporarily to
attend to some important function, using this feature makes the
extension free without loosing the call. This feature also helps
the receiving extn. to park (hold) the call in case it is not possible
to transfer the received call to the desired extension.
While talking to the call, Hook Flash, Dial 11.
Hang up.
Exchange will remind this extension after 72 seconds to
attend to the parked call.
(B) Picking Up Parked Call by the Parking Extension.
OPTION-1
Lift hand set, Hear Dial Tone
Dial 16
Last (latest) parked call will be retrieved.
11

OPTION-2
Lift hand set, Hear Dial Tone.
Dial 17.
First (earliest) parked call will be retrieved.
(C)

Picking Up Parked Call by the extension other than Parking Extn.

This feature allows any extension to Pick-up the parked call on

different extension.
Lift hand set, Hear dial Tone.
Dial 19 + Extn. No. (On which the call is parked).
20. PERSONAL SPEED DIALING (PERSONAL MEMORY BANK) :

This feature enables every extension to create its own personal

memory bank/directory of 10 Nos. The codes for this bank/directory
is of three digits from 800 to 809. Operate as follows to create this
directory/bank :
Lift Handset. Hear dial tone.
Dial 110 + 800to 809 + TRK + TN
TN = Tel. No. to restored (Max. 16 digits) N = 0 to 9
Trk = Trunk access code. (or 9 or 71, 72, ......... etc.)
Get assurance tone if you store a complete 16 digits number.
Alternatively press k to get assurance tone if you store lesser
no. of digits (i.e. less than 16) in memory bank.
Hang up
Repeat the above procedure for storing more tel. numbers.
21. CONFERENCE :
You can establish upto five party conference among internal /
external calls, which are parked.
Procedure :
Make conversation with a party (internal / External) and park
it and get dial tone.
Repeat above procedure for other parties with whom to
establish the conference. (Maximum up to 4)
After having parked all calls (upto maximum 4) just dial 18 to have
conference among parked calls and self extension.
12

22. DIALING FROM PERSONAL MEMORY BANK :

You can dial the external telephone nos. stored your personal
memory bank just by 3-digit code (provided you external nos.
satisfies your class of service status).
Lift the handset and wait for dial tone.
Dial 800 to 809
The external no. stored in the particular memory will be dialed
automatically.
Wait for entire no. to be dialed.
Start conversation.
23. DIALING FROM GLOBAL MEMORY BANK :
FROM MEMORY BANK 1
You can dial the external telephone nos. stored in GLOBAL memory
bank 1 just by a 3-digit code irrespective of your extension status
for direct outward dialing.
Lift the handset and wait for dial tone.
Dial 810 to 854. (720-759 in 1264 Model)
The external no. stored in the particular memory will be dialed
automatically.
Wait for entire no. to be dialed.
Start conversation.
FROM MEMORY BANK 2
You can dial the external telephone nos. stored in GLOBAL memory
bank 2 just by a 3-digit code (provided the external number
satisfies your class of service)
Lift the handset and wait for dial tone.
Dial 855 to 899. (760-799 in 1264 Model)
The external no. stored in the particular memory will be dialed
automatically.
Wait for entire no. to be dialed.
Start conversation.
13

24. EMERGENCY REPORTING :

(from selected extension only)
Some times you may require that one should attend you urgently and
you would like not to loose any time to search any person. The facility
EMERGENCY REPORTING can be used for this purpose as by
dialing a two digit code 4 preassigned extensions get simultaneous
ring. Thus any ringing extension who first lift the handset is
connected to the caller.

Lift the handset and wait for dial tone.

Dial 15
Four preassigned extensions will get ring simultaneously.
Listen ring back tone.
Start conversation as the call is answered any of the four
extensions.

25. DAY / NIGHT MODE SETTING :

You can set the system to receive the incoming P&T calls in different
modes in day and night. The different modes for day and night for
different junction lines can be set and it is illustrated in
PROGRAMMING MANUAL. Once this is done, all the trunks
incoming call modes can be changed.
SETTING OF DAY/NIGHT MODE or AUTO DAY/NIGHT MODE.
MANUAL SETTING :
TO SET DAY MODE
Lift handset and wait for dial tone.
Dial 112 + nitecode + 1
Get assurance tone.
Hang up
TO SET NIGHT MODE
Lift handset and wait for dial tone.
Dial 112 + nitecode + 0
Get assurance tone.
Hang up.
WHERE NITECODE IS A TWO DIGIT CODE SET DURING
SYSTEM PROGRAMMING. (INITIAL SETTING 99)
14

AUTO SETTING :
In this option the system switches between day and night mode
automatically at programmed timings. The procedure is illustrated in
programming manual.
26. SELF ALARMS :
The extension users can set upto 2 independent alarms at their
extensions in one of the following modes :
Alarm For Same Day
Alarm For Any Time in Next 30 Days
A Daily Alarm Which Rings Daily
To set these alarms proceed as below :

Lift handset and get dial tone

Dial 68 + (1/2) + HH + MM + QQ
Get assurance tone.
Hang up.

Where 1 & 2 stands for 1st or 2nd alarm

HH : hours in 24 hours mode
MM : minutes
QQ : 00 for same day alarm
: 01 to 31 as date for next 3 days.
: 33 for Daily Alarm
e.g. to set a daily alarm for 9.00 clock morning and a same day
alarm for 6.30 evening from same extension you will have to dial as
below :
Dial 68 1 09 00 33 for daily alarm.
and
Dial 68 2 18 30 00 for same day alarm.
At the time of maturity your extension will ring at a fast cadence to
indicate that it is a matured alarm and you will get music. If lift the
handset, otherwise it will automatically OFF within 25 seconds.
Moreover if at the time of alarm the extension is busy or the system is
off then it will ring whenever next time if finds the system is on and the
extension is free.
15

27. CANCELLATION OF SELF ALARMS :

All extension users can cancel their self alarm by their ext.
The procedure is as follows,

Dial 111 + personal passcode

Dial 79
Dial k
Get assurance tone
Hang up

28. DYNAMIC STD / LOCAL CALL CONTROL AUTO LOCKING :

The system offers a very unique facility to all extension users to
completely prevent misuse of all calls from their extensions. A 3-digit
personal passcode is provided to all extensions which is initially
777. By using this password you can control your status for direct
outward dialing and moreover you can change the passcode any
time.
However you can lock extension by a 3 digit code without password
and prevent misuse.
Effectively you will get class of service for outside dialing which
satisfies both your personal settings and settings of your extension
from master supervisory mode.
To program your extensions class of service you will have to first
come in self supervisory mode through your passcode and then you
can further program your all calls status or change your passcode.
Self Supervisory Mode
111 + 777 (Personal Pw)
TO LOCK YOUR EXTENSION FOR D.O.D.
Procedure :
Lift the handset and get dial tone.
Dial 119.
Get assurance tone.
Hang up.
16

TO CANCEL DYNAMIC LOCK

111 + Personal Pw + 99 + k
All Calls will open as per class of service.
TO OPEN ALL LOCAL CALLS WITH 95 BUT STD/ISD LOCK.
111 + Personal Pw + 89 + k
AUTO LOCKING (AFTER 10 SECONDS).
111 + Personal Pw + 91 + k
All calls on and after auto lock all calls off.
111 + Personal Pw + 81 + k
Local calls on and after auto locking all calls off.
111 + Personal Pw + 95 + k
All calls on and after auto lock local with 95 on.
111 + Personal Pw + 96 + k
All calls on and after autolocking local without 95 on.
29. TO CHANGE YOUR PERSONAL PASSCODE
Come in self supervisory mode.
Dial 88 + new passcode + new passcode
Get assurance tone now your personal passcode is changed
to new passcode (3 digits).
Thus you should keep your personal passcode secret to avoid any
chances of misuse and keep on changing it from time to time.
NOTE : If you forget your personal passcode then it can be Reset from
master supervisory mode. Passcode should be a 3 digits number.
30. BROKERS CALL :
It may some time be required to talk to 2 more parties one by one
while keeping other parties on Music on Hold. This facility can be
invoked with the help of CALL PARKING. To activate this you are
supposed to do like the example shown :
STEP 1 - Park the current call 1 (as illustrated earlier)
STEP 2 - Get dial tone
STEP 3 - Dial out other party and start conversation.
or
17

Get an incoming call directly or transferred and thus start

conversation with call 2
STEP 3 - Park call 2
STEP 4 - Get dial tone
STEP 5 - Retrieve the earliest parked call 1 code 17 and start
conversation.
STEP 6 - Park this call.
STEP 7 - Again retrieve the earliest parked call2 by code 16
STEP 8 - Now you get again connected to call 2
Now you can repeat the procedure from STEP 3 again.
31. PRINTING AND CALL STORAGE PROCEDURES :
(Available in Ultra series only)
All the facilities are illustrated in programming manual as these
features are accessible in master programming mode only.
32. DIRECT INWARD DIALING (D.I.D.) : (Available in Ultra series only)
This is one of the options which can be set for trunk(s) for incoming
P&T rings. If a trunk is set in D.I.D. mode the incoming of call and
procedure to be adopted by the external caller will be as illustrated
below.
When external caller dials your telephone number which is set in
D.I.D then first of all he gets P&Ts ring back tone for 3-4 seconds.
After that the call is matured by the EPABX itself and the system
sends Voice message for indicating the caller that now the
system expects a 2 digit extension number in DTMF only from
the external caller side. There is separate message for day and
night.
If the external caller dials a valid extension number in DTMF
within 4 seconds and that extension number is free then that
extension gets ring for 20 seconds or it is answered.
In cases when
The external caller does not dial any extension number in DTMF.
The external caller dials an invalid number.
The extension number dialed is valid but busy.
18

 The extension number dialed is valid and free and gets ring but
remains un-answered till 20 seconds.
Then it is D.I.D. failure and then the call will ring in one of the
following options set.
A simultaneous ring will be present for next 20 seconds on Self
service group of the trunk
A simultaneous ring will be present for next 20 seconds on
Common service group of trunks
A round robin ring will be present for next 20 seconds on self
service group of the trunk. If still the call is unanswered at all
ringing extensions it is disconnected and the P&T is released.
33. CALL WAITING (OFFERED BY P&T DEPTT.)
If you are having call waiting facility on your trunks line(s) it can be
invoked at Ext. also. The difference between the procedures are on direct
phone line and other on extension of the EPABX is illustrated below

CALL WAITING FACILITY :

ON DIRECT PHONE LINE

ON EXTENSION PHONE

1. HOOK FLASH
2. DIAL 1

1. HOOK FLASH
2. DIAL 81
OR

1. HOOK FLASH
2. DIAL 2

1. HOOK FLASH
2. DIAL 82

34. DOOR PHONE : (available in Ultra Series)

Press 28 to speak to Door Phone in Model 309 (Ultra).
Press 52 to speak to Door Phone in Model 616/824/832 (Ultra).
35. DOOR LOCK : (available in Ultra Series)
Press 77 to release the Door Lock in Model 309 (Ultra).
Press 55 to release the Door Lock in Model 616/824/832 (Ultra).
36. FORCED RELEASE OF TRUNK : (available upto 832 models)
Dial 79 + Ext./Trk.
37. HOTLINE INTERNAL (DELAYED) :
111 + 777 + 44 + Extn. No. + k
To Cancel
111 + 777 + 44 + Self Extn. No. + k
19

38. HOT OUTWARD DIALING :

(i.e. direct trunk dialtone instead of EPABX tone)
111 + 777 + 71 + 0/9 (zero or nine group)
To cancel
Dial any No. on Trk & then park the call with flash 11
Dial 111 + 777 + 70 + k
39. FLASH ON TRUNK LINE:
(as required by some operators for specific service access)
While conversation Flash 88
40. CONSOLE KEY SETTING (Available in 616 to 1264)
111 + 777 + 69 + Key No. (01-12) + Ext. / Trk + k
41. CONSOLE KEY SETTING (Available in 1264 Hotel Version)
Pw + 35 + KTS No. + Key No. + Ext. / Trk + k
42. SETTING OF SELF ALARM FROM OPERATOR (1264 Model)
66 + Ext. No. + 1/2 + HH + MM + QQ
43. CANCELLATION OF MORNING ALARM FROM OPERATOR
66 + Ext. No. / Room No. + 0

20

DOSA MANUAL (Direct Outward Subscriber Access)

DOSA THROUGH INDIVIDUAL EXTENSION
Now each & every Extension Holder can operate Dosa individually
through their own Extension after accessing the personal passcode
provided they have DOSA facility on their Extension.
Note :
1.
2.

The personal passcode should not be initial passcode i.e. 777 to

change personal passcode procedure, refer the Operation
Manual Sl. No. 31.
DOSA through individual Extension means, no need to dedicate
the last Extension of the System.

(a) To Programme the Extension for DOSA facility :

Steps :
Get Confirmation Tone .
Dial 86 + Ext. No. + 2 / 3
where Ext. No. - Extension Number
2 = for not allowing the DOSA facility.
3 = for allowing the DOSA facility.
Get in to Programming Supervisory Mode.
Press k
DIRECT OUTWARD STATION ACCESS (DOSA)
The DOSA can be routed through any extension but through the
personal passcode of that extension, one can have a for operating on
DOSA. This is done because if the BOSS wants to allow his
subordinate to use the Dosa facility then he should not worry about
any mis-use of DOSA facility through his Extension.
PRE CONDITIONS TO USE DOSA :
1)
2)
3)

When you are at some distant place, should have DTMF dialing.
One P&T line of your EPABX should be set in DID mode.
The personal passcode should not be 777 i.e. initial personal
passcode.

21

PROCEDURE FOR DOSA IS AS FOLLOWS

1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)
15)
16)

Dial your office number which is set in DID mode.

Get ring-back tone.
Get Voice DISA message if already fed.
Or get assurance tone
Now you are in Internal Mode of the System
Dial (10 + your Extension Number + Personal passcode).
Dial TRK Number by direct access code i.e. 71/72 .... up to 78.
Get assurance tone for 2 sec. then Trunk dial tone.
Get Trunk Dial Tone.
Dial the required number.
After 45 sec. you will get Beep Tone.
Press # to extend you call for next 30 sec. or Press 0 key to
extend your call for next 60 sec.
Otherwise Call will disconnect after 5 sec.
For longer conversation repeat step 12.
To dial other number/re-attempt previous one, dial * # then go
to step (8).
To dis-connect the call at any time dial * *

Note : Step 12 can be operated at any moment during conversation

even before getting the Beep Tone
2. TESTING PROCEDURE FOR USER
(A) IF A PARTICULAR EXTENSION IS FAULTY

Isolate the corresponding cable from MDF.

Connect a working telephone directly at MDF.
Make outgoing/incoming calls from/at the telephone.

a.

If fault is still there

Fault exists at PABX side.

b.

If the telephone works satisfactorily

Fault exists in extension or its cabling.
If from an extension a second extension no. is dialed while second
extension is dead.
Engage tone appears
cable is short, check from MDF
Ring back tone appears cable is broken, check from MDF

2.

22

3.

In case of multiple faults on different extensions or as routine

testing, one can test all extensions with the help of two working
order telephone through MDF.
Disconnect all extension cables from MDF.
Connect one phone at Ist extension point and another phone at IInd
extension point.
Make calls in both directions.
Repeat the above procedure by keeping one phone fixed at one
extension and second phone being connected to all other
extensions one by one.

(B) IF A PARTICULAR JUNCTION LINE IS FAULTY

Check cable of the junction line for disconnection or breakage.

Check fuse of the junction line, replace it if found blown off with
similar type fuse (100 ma).
Connect a working telephone directly on junction line at MDF and
make incoming/outgoing calls to/from it. If calls are successfully
being made in both direction then fault exists in PABX.
If the fault still observed then fault exists in junction lines central
office side.

(C) EARTHING : Ensure the earth be available at third pin of 3-pin

socket of AC mains.
Also make sure when connecting printer or computer to
system check voltage between earth of system and the device
it should be zero otherwise damage may occur in device or
EPABX system.

23

HOW TO CONNECT EPABX TO THE COMPUTER

1.

Make a serial port cable as shown in figure and connect it with

EPABX & Computer.
1

9 PIN D-TYPE CONNECTOR (FEMALE) X 2

2.

Open the Hyper terminal software in the computer by selection of

some files as illustrated below :
Start

Programme

Accessories

Communication

Hyper Term

Hyper Terminal

Note : If Hyper terminal is not in communication then please call your

computer professional to install Hyper terminal software.
3.

When you will click at Hyperterm, one globe will be rounding on

screen and then connection description window will open. In this
window type your file name & choose Icon then click at OK.

4.

Now screen will show Connect To window. In this window click at

connect using option and select COM - 1, 2, 3 or 4......... then click
at OK.

5.

Now screen will show COM PROPERTIES select all properties as

illustrated in programming manual, then click at OK.

6.

Now EPABX will connect with the computer and printing commands
will activate by computer key board.

7.

If system will not connect. Please go back on step 4 and change

COM port 1, 2, 3 or 4 ...............

24