---- LED Display

Instructions of super slim LED Display Screen

///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

Language: ()
English

Franaise

( Korean )

Espaol

Portuguese

///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

Instructions of super slim LED Display Screen

1. Software Installation
1.1. Copy all data in the CD attached to the product to the hard disk drive in computers (it may be
put in any hard disk drive in the computer, e.g. F:\). Open the directory where the data is stored after
being copied.

1.2. Open USB Driver File

If your computer system is XP, please double-click XP.exe file for installation.
If your computer system is Vista or Win7, please double-click Vista_Win7.exe file for
installation.
1

---- LED Display

---- LED Display

1.3. After completing the above operations, you may connect the display screen to computer via
USB data line which is provided with the product. If the connection is normal, you may see it in
port by right-clicking on my computer >> management >> devices management >> port.

1.4. After the driver installation is completed, double-click LedConfig.exe to run it. This green
software can be used upon being directly opened. After opening the software, you shall select the
communication control: Prolific USB-t0-Serial Comm Port (com*) which is green software. In
order to facilitate usage, it is recommended that you add it to a shortcut on the desktop. The method
is as follows: click the right mouse on the icon >> send to >> "shortcut on the desktop".

2. Introduction to the Software Interface

.Selection: It is used to determine whether to send the content. Check the check box in this
item to select the specific content to be sent. There are totally 8 check boxes. According to users
demands, one or more messages may be selected to be sent to cycle display on LED screen.
Note: As shown in above picture, only the checked entries are in active state.
.Types (display types of content): there are two types of text and picture for
selection.
Text: directly input the content to be displayed in the textbox.
2

---- LED Display

---- LED Display

Picture: The software supports BMP format pictures to be imported. Make the pictures
according to the size of dot matrixes (number of the existing lights displayed) of the
LED display screen. The height has two types: 12-point and 16-point.
.Content (textbox): may directly enter characters of different countries in it.
The type A is highlighted only when the text is selected. Click it to change the fonts. As
shown in the figure

... type is highlighted only when the graphics is selected. Click it to import the bitmap
pictures namely bmp format pictures.

Note: the content entered may be displayed via the preview bar beneath the software
interface. For example:

.Time: set the play speed of text or picture. There are 8 grades adjustable speeds.
.Action: Set the playback effect of texts or pictures. There are several effects like left/right
movement, up/down movement, fixed, multi-windows display and drifting snow. Specific motion
effects refer to the corresponding preview bar.
.Flash: if checked, the text or picture entered will be displayed in a flashing way.
.Border: it is generally used in English or digital display state.
When it is Chinese display or pictures, use of this effect is not recommended.
.Preview: It is used to display the content in the textbox where the current cursor is located. It
is the preview effect before sending data. The content displayed on the screen and the
motion effects selected are subject to the preview effect. What you see is what you get.
For example, when using the mouse to click the second message:

---- LED Display

---- LED Display

Preview effect is:

.SendSend the content entered in the computer to the display screen. It is unidirectional
without the function of data error correction. Incompleteness, blurred or dark screen
phenomenon may occur. Solution: send it again!
.Download: Download the content entered in the computer to the display screen. The download
is the data sending with the function of error correction. The content normally updated
is accurate without errors.
.Data sending progress bar: It is used to display the amount completed in data sending or
downloading.
.Communication control port: it is used to display the current connected port. It is
USB-to-Serial computer COM9 port as shown in the following picture.

Note: If the computer is a desktop, the data will be sent to the display screen normally only
when the communication port (COM1) in communication control is changed to Prolific
USB-to-serial Comm port (COM*).

3. Introduction to the Menu Bar

. File: it is used to open, save, save as file or exit software.

. View: it is used to display toolbar or status bar.
. Language: it is used to select the language to be displayed on the software interface.
. Brightness: It is used to adjust the luminance of the display screen. There are five
luminance levels for selection.
4

---- LED Display

---- LED Display

. Size: Select the corresponding 12/16 pixel according to the number of light lines on
the products of different specifications.
. Rotate: it is used to change the display mode of the content on the display screen.
Normal 0, 90, 180 and 270Specific effect can be displayed via the preview.
. Help: open the help file in the software by clicking it if in doubt during using the
software.

4. Introduction to the Tool Bar

Some common commands are listed in buttons in the tool bar. They are easy operations for some
commands in the menu commands.

Flow for Data Sending:

After editing the content to be shown in the software and connecting the USB to infrared adapter, check whether
CCPCommunication Control Port is normal and then keep the transmitting terminal of USB sending line still
towards (the distance within 2CM) the infrared light-receiving diode (black) (as shown in the following figure) on
the middle position of the lower-right corner of the front of LED screen. And then click Send"; we can remove
the USB sending line, only when Data sending progress bar" shows the state of completion and LED ultrathin
screen is beginning to display content; now the data is updated successfully. Note: when the content is being sent,
the display screen must be kept in the state of power-on (voltage of 3.7V~12V, red line for positive electrode and
black line for negative electrode).

---- LED Display

---- LED Display

During the data sending, if the transmitting terminal jitters (i.e. when you are grasping the other end of the data
line against the receiver point on the lower of the display screen), the data may be incomplete, which will result in
incomplete content on the display screen; the way to solve the problem is to normally send the data again.

Notices on software operation:

. Single message input cannot exceed 256 characters, or it will indicate which one exceeds the limitation.
Fox example:

. All selection effect shall refer to preview effect right in the software.
. The imported picture is bitmap format, i.e. bmp format; for normal display, the section to be displayed in the
picture shall be applied in white; the section not to be highlighted shall be applied in black as the background.
Unlike the display of word, the picture always displays the normal effect of rotation effect option in the menu
bar or toolbar.
Note: In order to make the picture by drawing look like the displayed one, the pixel of the picture shall fit in
with the pixel of display screen, like12X60,12X72,12X96,12X120.
. For input of other language, if the character spacing for preview effect is quite large, you can adjust it by
changing the character style.
. If the size of the word shown on the display screen is irregular, for example: the stroke of lower part of the
word is not enough, perhaps you selected the pixel of 16. Solution: pixel in the menu bar12 pixel.
As shown in the following figure:

. The software has provided rotation function for the display modes of the content on the display screen, which

---- LED Display

---- LED Display

include normal 0, 90, 180and 270, so the user can directly press the corresponding button in the toolbar
or rotation in the menu bar according to the specific conditions to select the desired effect. The effect shown
in the preview of the software interface beforehand is the effect of the content to be shown on the display
screen.

Frequently Asked Questions:

1. If the excessive input are sent out, it will probably result in the messy
code, disorder or other abnormal display of the content shown on the
display screen; the way to solve the problem is to reduce the input as
much as possible and then send them again.
The amount of the input will be shown in Input Capacity; the following figure shows the
state without input.
2. Because the change for the content of the product can be achieved by infrared receiver point (the black point
shown in the following figure) on the display screen, the collision or scratch appearing on the bare board (i.e.
one single circuit board without outer packing) during service may cause damages to this point. If the data
cannot be sent, when the software is operated normally and the data line is connected correctly, it is
necessary to keep eyes on this point.
3. During the data sending, if the transmitting terminal jitters (i.e. when you are grasping the other end of the data
line against the receiver point on the lower of the display screen), the data may be incomplete, which will result in
incomplete content on the display screen; the way to solve the problem is to normally send the data again.

///////////////////////////////////////////////////////////////////////////////////////////

LED

1.1 F:\

---- LED Display

---- LED Display

1.2 USB Driver

XP XP.exe ;
Vista Win7 Vista_Win7.exe ;

1.3 USB
>>>>>>

1.4 LedConfig.exe
Prolific USB-t0-Serial Comm Port(com*)
>>>>

.
8 LED

.()
8

---- LED Display

---- LED Display

BMP LED
1216

.()
A:

... bmp

. 8
.

.
.

---- LED Display

---- LED Display

.,
,!

.: ,

.
. USB COM9

COM1Prolific USB-to-serial Comm

port(COM*)

12/16
090180270

10

---- LED Display

---- LED Display

USB
USB ( 2CM) LED ()()
LED USB

( 3.7V~12V,)

256

bmp

12x60,12x72,12x96,12x120

16
12

090180270

11

---- LED Display

---- LED Display

///////////////////////////////////////////////////////////////////////////////////////////

LED

1.1. F:\

1.2. USB Driver

12

---- LED Display

---- LED Display

XP XP.exe ;
VISTA W7 VISTA_W7.exe ;
1.3. USB
>>>>>>

1.4. LedConfig.exe
>>>>

8
LED

BMP LED
1216

13

---- LED Display

---- LED Display

A:

... bmp

,,,
,,
!
: ,,

14

---- LED Display

---- LED Display

USB COM9

: COM1 Prolific USB-to-serial Comm

port(COM?)

1
2
3English
4
5 12 16
6 090180270
7

USB USB
( 2CM) LED ()()
LED USB
( 3.7V~12V,
)

15

---- LED Display

---- LED Display

256

bmp

12X60,12X72,12X96,12X120

16
12

090180270

16

---- LED Display

---- LED Display

///////////////////////////////////////////////////////////////////////////////////////////

LED

1.1 ) ( F: .

1.2 "" USB Dirver

XP XP.exe.
VISTA Win7 VISTA_Win7.exe.
" 1.3USB
." -- -- --

---- LED Display

17

---- LED Display

1.4 " " LedConfig.exe

) Prolific USB-to-serial Comm port(comx .

.
: .8-1
: \ .
: .
: BMP.
: .
A .

... BMP.

---- LED Display

18

---- LED Display

: 8 .
: .
: .
: .
: !
: .
: !
: . ..
:
: . .

.1 :
.2 :
.3 :
.4 :
.5 : 16/12
.6270 180 90 0 :
.7 :

USB
"" " " LED .
) 2( USB )(
) ( .
:
---- LED Display

19

---- LED Display

///////////////////////////////////////////////////////////////////////////////////////////

LED

1.1. -, ,
( F), .

20

---- LED Display

---- LED Display

1.2. USB Driver

,
XP.exe.
VISTA Win7,
VISTA_Win7.exe.
1.3. USB- ,
, , , " "
- - - .

1.4. LedConfig.exe.
. :
Prolific USB-to-serial Comm port (comx).

: . .

21

---- LED Display

---- LED Display

1-8 .
: /
: .
: BMP.
: .
. .

... . bmp.

: . 8 .
: , , , , , ,
.
: .
: .
: . .
: .
.
. : .
: .
,
.
: .
: . . .1.4.

:
22

---- LED Display

---- LED Display

1: , , .
2: .
3: .
4: . 5 .
5: 12/16 .
6: 0, 90, 180, 270
7: .

:
USB, . .
. . ,
.
USB( 2)
- (), LED(.
.), .
: .)

23

---- LED Display

---- LED Display

///////////////////////////////////////////////////////////////////////////////////////////

Manuel dutilisation de lcran ultra-mince LED

Installation de logiciel
1.1. Copier toutes les donnes dans CD-ROM assorti dans le disque dur de lordinateur (par exemple, F :) et puis
ouvrir le rpertoire denregistrement aprs avoir coll.

1.2. Ouvrir le fichier USB Dirver.

Si votre systme informatique est en XP, double-cliquez sur le fichier d'installation XP.exe.
Si votre systme informatique est en VISTA Ou Win7, double-cliquez sur le fichier d'installation
VISTA_Win7.exe.
1.3. Transfert de donnes infrarouge cble USB l'ordinateur, le cble de donnes avec le produit l'usure
normale si la connexion, vous pouvez dans le "Poste de travail" clic droit - Grer - Gestionnaire de priphriques Les ports peuvent tre affichs.

24

---- LED Display

---- LED Display

1.4. Double-cliquez sur " LedConfig.exe", le prsent logiciel est en version verte, il peut tre utilis directement
aprs louverture, aprs avoir ouvert le logiciel, il faut choisir le contrle de communication: Prolific
USB-to-serial Comm port (COMx).

Description dinterface oprationnelle de logiciel:

Slection : Utiliser pour slectionner larticle de contenu envoyer, larticle coch est envoyer, vous
pouvez choisir un article ou plusieurs articles parmi 1-8 pour une fois.

. Type: texte / image en deux types .

Texte : saisir directement le contenu afficher dans le champ de texte .
Graphique : le logiciel supporte lintroduction dimage en format BMP.
.

Contenu: les caractres nationaux peuvent tre saisis directement.

Le type A ne reflte que lors de la slection de texte, cliquer pour modifier la police.

Le type "..." ne reflte que lors de la slection dimage, cliquer pour transfrer l'image de position, soit, en
format bmp .

25

---- LED Display

---- LED Display

. Temps: configurer le temps de dplacement et de sjour, il existe 8 options.

. Effets de mouvement: dplacement gauche, droite, en haut, en bas, fixe, sous-fentre, flocon de neige et
autres effets.
Clignotant: aprs avoir coche, le contenu de prsente rubrique clignote.
. Lampe de course de cheval : aprs avoir coch, laffichage de cadre bord de contenu de prsente rubrique .
Aperu: avant lenvoi, le contenu peut tre daffich dans la fentre daperu, ce que vous voyez est ce que
vous obtenez!
. Envoi : envoyer le contenu entr dans lordinateur lcran. Cest unidirectionnel sans correction derreur des
donnes, il est possible dapparatre un cran incomplet ou un cran en neige ou un cran noir ;
solution : renvoyer une fois !
.Tlchargement : tlcharger le contenu entr dans lordinateur dans lcran, le tlchargement est un envoi
avec la fonction de correction derreur, le contenu de mise jour normale est exact sans erreur.
.Barre de progression: elle est utilise pour afficher lavancement des donnes envoyes ou tlcharges.
. Contrle de communication : il permet dafficher le port de connexion actuel, voir 1.4.

Description de barre menu :

1. Fichier : il est utiliser pour ouvrir, enregistrer, enregistrer sous le ficher ou quitter le logiciel
2. Consultation : elle nous permet de dcider si nous voulons afficher la barre doutils ou la barre dtat
3. Langage : slectionner la langue daffichage linterface de logiciel
4. Luminosit: rgler la luminosit de l'cran, il existe cinq niveaux de luminosit
5. Pixel : slectionner le pixel 12/16 correspondant selon les diffrents nombres de ligne des lumires diverses de
spcification de produit
6. Rotation: 0, 90, 180, 270.
7. Aide : il est possible de consulter le manuel dutilisation

Processus denvoi des donnes :

Brancher le cble denvoi USB, voir la figure, ouvrir le logiciel informatique pour entrer le contenu et
slectionner le contrle de communication, ensuite, cliquer sur envoi , lorsque laffichage de barre de
progression est termin et le contenu daffichage est restaur dans lcran ultra-mine LED,soit, la mise jour
des donnes avec succs.
Par la suite, viser (la distance ne dpasse pas 2CM) lextrmit denvoi de cble denvoi USB au tube rcepteur

26

---- LED Display

---- LED Display

infrarouge (noir) situ approximativement au milieu en bas droite de la faade de lcran LED (voir la figure
ci-dessous), rester intact.
Remarque: tout le processus dopration doit tre ralis sous tension.

///////////////////////////////////////////////////////////////////////////////////////////

LED

1.1 CD F:

27

---- LED Display

---- LED Display

1.2USB Dirver

XP XP.exe
VISTA Win7 VISTA_Win7.exe
1.3 USB
"" - - -

1.4LedConfig.exe
Prolific USB-to-serial Comm port (comx)

28

---- LED Display

---- LED Display

18

BMP

BMP

1.4

29

---- LED Display

---- LED Display

12/16
090180270

USB
LED

USB LED 2

30

---- LED Display

---- LED Display

///////////////////////////////////////////////////////////////////////////////////////////

LED

1.1 CD ( : F)
.

1.2 USB Dirver .

XP , XP.exe .
VISTA Win7 , VISTA_Win7.exe .
1.3 USB ,
, " " - - - .

31

---- LED Display

---- LED Display

1.4 " LedConfig.exe" .

. Prolific USB-to-serial Comm port (COMx)
.

. : . 1-8
.
: /
:
: BMP
. :
"A"

32

---- LED Display

---- LED Display

"..." BMP .

. : , 8
. : , , , , , ,
. :
. :
. : !
. : . ,
. : 1 !
. : .
.
. : .
. : . 1.4

1. : , ,
2. :
3. :
4. : , 5
5. : 12/16
6. 0, 90, 180, 270
7. :

33

---- LED Display

---- LED Display

:
USB
LED
.
USB ( 2CM ) LED
()( ) .
: .

///////////////////////////////////////////////////////////////////////////////////////////

34

---- LED Display

---- LED Display

Manual del Usuario de la Pantalla sobremesa LED

Instalacin del Software

1.1.Copie todos los datos en el disco auxiliar del producto en el disco rgido de la computadora (por ejemplo, F:/),
abra la carpeta donde guarda los datos.

1.2.Abra el archivo USB Driver

Si su sistema de ordenador es XP, por favor haga doble clic en el archivo XP.exe.
Si su sistema de ordenador es VISTA O Win7, por favor haga doble clic en el archivo VISTA_Win7.exe.
1.3. De transferencia de datos por infrarrojos a cable USB a la computadora, cable de datos con el producto para
usar en caso de la conexin normal, se puede en el "Mi PC" haga clic derecho - Administrar - Administrador de
dispositivos - Puertos se pueden mostrar.

1.4.Haga doble clic en LedConfig.exe, este software es de versin verde, se lo puede utilizar con simplemente
abrirlo. Despus de abrir el software, seleccione: Prolific USB-to-serial Comm port (comx) para el control de
comunicacin.

Descripcin de la Interfaz de Operacin del Software

35

---- LED Display

---- LED Display

Seleccin: Para seleccionar los tems que se va a transmitir. Marque los tems para transmitirlos,
seleccionar un tem o ms tems en 1-8

puede

Tipo: Texto/Imagen
Texto: Introduzca el contenido presentado directamente en el cuadro de texto
Imagen: El software apoya la importacin de las imgenes de formato BMP
Contenido: Puede introducir directamente los caracteres de diferentes pases
Tipo A slo se presenta al seleccionar el texto, haga clic de eso para cambiar laforma de carcter escrito.

Tipo ... slo se presenta al seleccionar la imagen, haga clic de esa para importar una imagen de frmula bmp.

Tiempo: Ajustar el tiempo de permanencia de movimiento de contenido. Hay 8 niveles para su seleccin.
Efecto de accin: movimiento hacia izquierda, derecha, arriba, abajo, fijacin, divisin de ventanas, nieves,
etc.
Intermitente: Al seleccionar este tem, el contenido del tem seleccionado est intermitente

36

---- LED Display

---- LED Display

Marquesina: Al seleccionar este tem, el contenido del tem se presenta con un marco.
Vista previa: Antes de transmitir el contenido, se puede verlo en la ventana de vista previa. Lo que ve es lo
que obtiene!
Transmisin: Transmitir los contenidos introducidos en la computadora a la pantalla. Es de una va sin
correccin de errores en los datos, es posible existir una visualizacin incompleta o copa de nieve o pantalla negra.
Solucin: Transmtalos una vez ms!
Descarga: Descargar los contenidos introducidos en la computadora a la pantalla. La descarga es una
transmisin con la funcin de correccin de los errores, los contenidos de actualizacin normal son precisos sin
errores.
Barra de progreso: Para visualizar el progreso de la transmisin o de la descarga de los datos.
ontrol de comunicacin: Para presentar el puerto que est conectado. Vase 1.4

Descripcin de la Barra de Mens:

1Archivo: Para abrir, guardar, guardar como... el archivo o salir del software
2Consultar: Para visualizar u ocultar la barra de herramientas o barra de estados
3Idioma: Seleccionar el idioma de la interfaz del software
4Brillo: Ajustar el brillo de la pantalla, tiene cinco niveles de brillo para la seleccin
5Pxeles: Seleccionar el pxel 12/16 correspondiente segn el nmero de lneas de luces del producto.
6Rotacin: 0, 90, 180, 270
7Ayuda: Puede ver el manual

Proceso del Transmisin de Datos

Enchufe el cable de transmisin de USB como se muestra en la figura, abra el software en la computadora,
introduzca los contenidos y seleccione el control de comunicacin, luego haga clic de Transmitir, cuando
la Barra de progreso muestre la finalizacin de la transmisin y la pantalla ultra-delgada de LEC vuelva
a presentar los contenidos, significa un xito en la actualizacin de los datos.
Luego alinee el transmisor del cable de transmisin de USB (distancia no superior a 2CM) con el receptor
de infrarrojos (negro) en la posicin inferior derecha central de la pantalla LED (como se muestra en la
figura siguiente) y mantenga unos segundos sin mover.
Nota: Todo el proceso de operacin debe ser llevado a cabo con la electricidad disponible.

37

---- LED Display

---- LED Display

///////////////////////////////////////////////////////////////////////////////////////////

instruo de uso do monitor fino LED

instalao de software
1.1. Copia todos os dados no disco combinado do produto ao disco rgido do computador (por exemplo:F ), abre o
diretrio quardado.

38

---- LED Display

---- LED Display

1.2. Abre o arquivo deUSB Dirver

Se o seu sistema do computador ser XP, por favor pressione duas vezes o arquivo de instalao de XP.exe;
Se o seu sistema do computador ser VISTA ou Win7, por favor pressione duas vezes o arquivo de instalao
de VISTA_Win7.exe;
1.3.Transfere a linha de dados infravermelha USB do computador da conexo, a linha de dados fsforos que a
correia junto junto com o produto, se conectar normalmente, ento pode endireitar as batidas -- na gerncia -gerncia do equipamento -- mova da no computador mina para ser possvel para demonstrar.

1.4. Pressiona duas vezes para funcionar o software LedConfig.exe de edio verde que pode ser usado por
abertura directa. Depois de abrir o software, escolha o controle de comunicao : Prolific USB-to-serial Comm
port (comx).

instruo da interface de operao do software:

escolhar: usado para escolhar tem do contente enviado, envia o tem marcado, pode escolhar um ou mais
dentro 1-8
tipo: texto/figura

39

---- LED Display

---- LED Display

texto: entre directamente o contente para exibio no quadro de texto.

figura: o software suporta o foto de formato BMP
contente: pode entrar directamente os caracteres de todos os pases.
Encarna tipo A quando escolher o texto, o pressionar pode mudar a forma de carcter.

Encarna tipo... quando escolher a figura, o pressionar pode ajustar o foto do formato bmp.

tempo: ajustar o tempo de estadia e movimento do contente, h 8 nveis escolhidos.

eifito de movimento: move esquerda, direita, acima e abaixo, efeito fixo, separado e de neve.
cintilar: depois de marcar, o contente marcado exibe cintilado.
relmpago de cinto: depois de marcar, exibe o quadrado do contente marcado
pr-estreia: o contente pode ser exibido na janela de pr-estreia antes de enviar.
enviar:Envia o contente entrado do computador ao monitor. sozinho sem corrigem de dados. Pode acontecer
a tela incompleta, confusa ou perta. Mtodo de soluo: Envia outra vez.
download: Descarrega o contente entrado do computador ao monitor. o envio com funo da corrigem de
erro. O contente actualizado normal correto.
bar do progresso: usado para exibir desenrolar do trabalho dos dados enviados ou descarregados.
controle de comunicao: usado para exibir a porta ligada actual. Veja 1.4

instruo da coluna de menu:

1. documento: usado para abrir, guardar, guardar de novo o documento ou sair do software.

40

---- LED Display

---- LED Display

2. examinar: usado para se exibe a coluna de instrumento ou coluna de estado.

3. lngua: escolha a interface de software para exibir lngua.
4. brilho: ajusta o brilho do monitor, tem brilho de 5 nveis escolhido.
5. pixel: de acordo a especificao do produto, escolha 12/16 pixel correspondido do nmero da lmpada.
6. girar: 090180270
7. ajudar: pode ver a instruo de uso.

processo da envia de dados

Insere bem o cabo de envio USB. Como indicado na figura, abre o software do computador, entra o
contente e escolha o controle de comunicao, e depois pressiona enviar. Quando o bar do progresso exibir
acabado, o monitor fino LED restaura o contente exibido, significa a actualizao de dados com sucesso.
Fica a extremidade de envio do cabo de envio USB apontado(a distncia menos de 2CM) ao tubo de
recepo dos raios infravermelhos (perto) na direita abaixo do monitor LED (como a figura abaixo), e mantem
continuamente.
nota: todos os processos de operao tm de executar na situao ligada rede elctrica.

41

---- LED Display

---- LED Display

LED

1.1 ) ( F:
.

1.2 USADriver
XP XP.exe .

1.3 .

LedC.exe 1.4
. " ) " P(comx .

---- LED Display

42

---- LED Display

: .
1 8 .
:
:
: BMP .
:
" " A
" " ... BMP .

---- LED Display

43

---- LED Display

: 8 .
:

: .
: .
: .
: .

. : !
: .

.
:
: . 1.4

.1 :
.2 :
.3 :
.4 : 5 .
---- LED Display

44

---- LED Display

.5 ) ( :
1612
.6 090180270 :
.7 : .

:
USB
" " " " " " LED
.
USB ) cm2 ( ) (
) LED ( .
: .

---- LED Display

45