Scribd
Upload
108 views2 pages

Checklist Design Evaluation

This document provides a checklist for designs submitted for evaluation to NESPAK for the Earthquake Reconstruction and Rehabilitation Project. It outlines the general requirements that are valid for both cast in situ and prefabricated structures, as well as additional requirements specific to each type of structure. The general requirements include a covering letter, registration details of the designer, project brief, site description, soil investigation report, and structural and system drawings. For cast in situ structures, additional requirements include design criteria, codes and standards used, and a structural analysis report. For prefabricated structures, requirements include literature from the supplier on technical, performance and precedent details.

Uploaded by

scriptd_ozd3n
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
108 views2 pages

Checklist Design Evaluation

This document provides a checklist for designs submitted for evaluation to NESPAK for the Earthquake Reconstruction and Rehabilitation Project. It outlines the general requirements that are valid for both cast in situ and prefabricated structures, as well as additional requirements specific to each type of structure. The general requirements include a covering letter, registration details of the designer, project brief, site description, soil investigation report, and structural and system drawings. For cast in situ structures, additional requirements include design criteria, codes and standards used, and a structural analysis report. For prefabricated structures, requirements include literature from the supplier on technical, performance and precedent details.

Uploaded by

scriptd_ozd3n
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Earthquake Reconstruction and Rehabilitation Project

Check List for Designs submitted for Evaluation to NESPAK


Sr. No.
Description
Status
General ( Valid for Both cases)
1.
Signed Covering letter from sponsor / owner, addressed to
General Manager NESPAK Earthquake Reconstruction &
Rehabilitation Project with a copy for information to ERRAs
Donors & Sponsorship Cell.
2.
Registration Certificate of designer / consulting engineer with
license No.
3.
Project Brief
4.
Site description report, including topography, slopes, ridges etc.
5.
Soil investigation Report or basis for design values used.
6.
Soft copy of Architectural & Structural Drawings (foundations,
columns, beam floor slab, roof & joints), Analysis & Design with
specifications of material used
7.
Detailed drawings of Electrification with specification of material
used
8.
Detailed drawings of Plumbing System with specification of
material used
9.
Three hard copies of design documents duly signed both by the
owner and the designer. (one copy will be returned back with
comments)
Case -1: Cast In Situ
1.
Design Criteria including the following:
a. Codes and Standards
b. Design Loads, including Seismic Design Parameters
c. Material Strength and Properties (Modulus of elasticity, Poissons
ratio etc.)
d. Structural System
e. Software used, Preferably use any of the following software.
1. SAP 2000
2. E-Tab
3. STAAD Pro
2.
Structural Analysis Report covering following:
`
a. At least 2D computer model frames in mutually orthogonal
direction.
b. Soft copy of input files
c. Backup calculations used for input data
d. Design Stress Checks for all Structural members and
displacement at key locations.

Sr. No.
Description
Case 2: Prefabricated Structures
1.
Literature from supplier covering:
a. Technical and commercial aspects
b. Performance characteristics of joints and connections
c. Period since this structural system has been in use.
d. Precedents of the use of this structural system in other seismic
areas of the World
e. Details of attachments of non structural elements with structural
system.

Status

Note:
1. Time period for approval and/or comments, from NESPAK will be three
weeks.
2. ERRAs present policy supports pre-fabricated construction and fast
construction technologies only for temporary or transitionary structures.
Therefore, NESPAK shall undertake review of such structures if ERRA
allows the same for particular activity.

You might also like