Feeder Protection Relay

Product Guide

REX 521

Feeder Protection Relay

REX 521
1MRS752177-MBG
Issued: 20.11.2001
Status: Updated
Version: H/18.10.2010
Data subject to change without notice

General

The protection relay REX 521 is designed for

protection, control, measuring, and supervision in medium voltage networks. Typical
applications include incoming and outgoing
feeders as well as substation protection. The

protection relay is provided with energizing

inputs for conventional current and voltage
transformers. Also a hardware version with
inputs for current and voltage sensors is
available.

Design

The protection relay is based on a multiprocessor environment. The human-machine

interface (HMI)1 including an LCD display
with different views makes the local use easy

and informs the user via indication messages.

Modern technology is applied both in hardware and software solutions.

1. HMI is referred to as MMI in the relay and in the

Relay Setting Tool.

The protection relay is part of the ABB Substation Automation system and extends the
functionality and flexibility of the concept
further.

Feeder Protection Relay

REX 521
1MRS752177-MBG

Features

Standard configuration B01:

Standard configuration B02:

Three-phase non-directional overcurrent

protection with three stages

Three-phase non-directional overcurrent

protection with three stages

Non-directional earth-fault protection with

three stages

Three-phase transformer inrush and motor

start-up current detector

Phase discontinuity protection for three

phases

Non-directional earth-fault protection with

three stages

Three-phase thermal protection for cables

Phase discontinuity protection for three

phases

Three-phase transformer inrush and motor

start-up current detector

Three-phase thermal protection for cables

Supervision function for the energizing current input circuit

Supervision function for the energizing current input circuit

Current waveform distortion measurement

Current waveform distortion measurement

Three-phase current measurement

Three-phase current measurement

Neutral current measurement

Neutral current measurement

Calculation of the accumulated electric

breaker wear of the circuit breaker (CB)

Calculation of the accumulated electric

breaker wear of the circuit breaker (CB)

Transient disturbance recorder

Transient disturbance recorder

Trip-circuit supervision

Trip-circuit supervision

Delayed trip output for the circuit-breaker

failure protection (CBFP) function

Delayed trip output for the circuit-breaker

failure protection (CBFP) function

Circuit breaker control with indication

Automatic reclosing 1...5 shots

Lockout function

Circuit breaker control with indication

Object indication

Lockout function

Logic control position selector

Object indication

User-configurable I/Os

Logic control position selector

Interlocking

User-configurable I/Os

User-configurable alarm LEDs

Interlocking
User-configurable alarm LEDs

3I >

50/51

MCS

I 0>

50N/51N

TCS

3I 2f >

68

I>

46

49F

CBFP

62

LO

86

CBCM

3I

3I >

50/51

MCS

I 0>

50N/51N

TCS

3I 2f>

68

CBCM

I>

46

49F

0
R

3I~harm

REX 521 B01

Fig. 1

000

I0

79

CBFP

62

LO

86

Block diagram of B01

I
R

3I~harm

3I

REX 521 B02

Fig. 2

000

Block diagram of B02

I0

Feeder Protection Relay

REX 521
1MRS752177-MBG

Features (contd)

Standard configuration M01:

Standard configuration M02:

Three-phase non-directional overcurrent

protection with three stages

Three-phase non-directional overcurrent

protection with three stages

Three-phase transformer inrush and motor

start-up current detector

Three-phase transformer inrush and motor

start-up current detector

Directional earth-fault protection with three

stages

Directional earth-fault protection with three

stages

Phase discontinuity protection for three

phases

Phase discontinuity protection for three

phases

Three-phase thermal protection for cables

Three-phase thermal protection for cables

Supervision function for the energizing current input circuit

Supervision function for the energizing current input circuit

Current waveform distortion measurement

Current waveform distortion measurement

Three-phase current measurement

Three-phase current measurement

Neutral current measurement

Neutral current measurement

Residual voltage measurement

Residual voltage measurement

Calculation of the accumulated electric

breaker wear of the circuit breaker (CB)

Calculation of the accumulated electric

breaker wear of the circuit breaker (CB)

Transient disturbance recorder

Transient disturbance recorder

Trip-circuit supervision

Trip-circuit supervision

Delayed trip output for the circuit-breaker

failure protection (CBFP) function

Delayed trip output for the circuit-breaker

failure protection (CBFP) function

Circuit breaker control with indication

Automatic reclosing 1...5 shots

Lockout function

Circuit breaker control with indication

Object indication

Lockout function

Logic control position selector

Object indication

User-configurable I/Os

Logic control position selector

Interlocking

User-configurable I/Os

User-configurable alarm LEDs

Interlocking
User-configurable alarm LEDs

3I >

50/51

MCS

67N

TCS

3I 2f>

68

CBCM

I>

46

I 0>

000

50/51

MCS

67N

TCS

3I 2f>

68

CBCM

I>

46

49F

3I >
0

3I~harm

I 0>

49F

CBFP

62

LO

86

3I

I0

0
U0

Block diagram of M01

79

CBFP

62

LO

86

REX 521 M01

Fig. 3

000

I
R

3I~harm

3I

I0

U0

REX 521 M02

Fig. 4

Block diagram of M02

5

Feeder Protection Relay

REX 521
1MRS752177-MBG

Features (contd)

The main difference between the standard

configurations B01/B02 and standard configurations M01/M02 is the directional earthfault protection, which is included in the standard configurations M01 and M02. The difference between configurations B01 and B02,
and likewise between M01 and M02, is the
auto-reclosure function in B02 and M02.
Standard configuration H01:
Three-phase directional overcurrent protection with two stages

Interlocking
User-configurable alarm LEDs

3I>

Directional earth-fault protection with three

stages
Phase discontinuity protection for three
phases
Three-phase thermal protection for cable
Synchro-check/voltage-check function with
one stage
Supervision function for energizing current
input circuit
Supervision function for energizing voltage
input circuit
Current waveform distortion measurement
Voltage waveform distortion measurement
Three-phase current measurement
Neutral current measurement
Three phase-to-earth voltage measurements
Residual voltage measurement
System frequency measurement
Three-phase power and energy measurement

MCS
TCS1
CBCM

I 0>

000

67N

3I~harm

3I 2f>

68

I>

46

49F

25

SYNC
0

CBFP
LO

I
R

3U~harm

3I

I0

3U

pf

79
*/62
86

REX 521 H01

Fig. 5

Block diagram of H01

Note! The standard configuration H01 is

available only with the sensor HW version.
Standard configuration H02:
Three-phase directional overcurrent protection with two stages
Three-phase non-directional overcurrent
protection with two stages
Three-phase transformer inrush and motor
start-up current detector
Directional earth-fault protection with three
stages
Underfrequency or overfrequency protection with one stage
Phase discontinuity protection for three
phases
Three-phase thermal protection for cables

Calculation of the accumulated electric

breaker wear of the circuit breaker (CB)

Supervision function for energizing current

input circuit

Transient disturbance recorder

Supervision function for energizing voltage

input circuit

Trip-circuit supervision
Delayed trip output for the circuit-breaker
failure protection (CBFP) function

Current waveform distortion measurement

Automatic reclosing 1...5 shots

Three-phase current measurement

Circuit breaker control with indication

Neutral current measurement

Lockout function

Three phase voltage measurements

Object indication

Residual voltage measurement

Logic control position selector

System frequency measurement

User-configurable I/Os
6

50

3I>

Three-phase non-directional overcurrent

protection with one stage
Three-phase transformer inrush and motor
start-up current detector

67

Voltage waveform distortion measurement

Feeder Protection Relay

REX 521
1MRS752177-MBG

Features (contd)

Three-phase power and energy measurement

Synchro-check/voltage-check function with

one stage

Calculation of the accumulated electric

breaker wear of the circuit breaker (CB)

Supervision function for energizing current

input circuit

Transient disturbance recorder

Supervision function for energizing voltage

input circuit

Trip-circuit supervision
Delayed trip output for the circuit-breaker
failure protection (CBFP) function

Current waveform distortion measurement

Voltage waveform distortion measurement

Automatic reclosing 1...5 shots

Three-phase current measurement

Circuit breaker control with indication

Neutral current measurement

Lockout function

Three phase voltage measurements

Object indication

Residual voltage measurement

Logic control position selector

System frequency measurement

User-configurable I/Os

Three-phase power and energy measurement

Interlocking

Calculation of the accumulated electric

breaker wear of the circuit breaker (CB)

User-configurable alarm LEDs

Transient disturbance recorder

3I>
3I >

67

MCS1

50/51

TCS
CBCM

I0 >

000

67N
3I~harm

Trip-circuit supervision
Delayed trip output for the circuit-breaker
failure protection (CBFP) function

Automatic reclosing 1...5 shots

f</f>

81U/81O

3I2f>

68

Lockout function

I>

46

Object indication

Circuit breaker control with indication

3U~harm

49F

CBFP
LO

3I

I0

3U

U0

pf

79
*/62
86

Logic control position selectorUser-configurable I/Os

Interlocking
User-configurable alarm LEDs

REX 521 H02

3I >

Fig. 6

Block diagram of H02

Standard configuration H03:

I0 >

Directional earth-fault protection with three

stages
Phase discontinuity protection for three
phases
Three-phase thermal protection for cable

67N

3I 2f>

68

I>

46

Three-phase non-directional overcurrent

protection with three stages
Three-phase transformer inrush and motor
start-up current detector

50/51

MCS

000

TCS
CBCM

I
R

3I~harm
3U~harm

49F

25

SYNC
0

3I

I0

3U

U0

pf

79

CBFP

*/62

LO

86

REX 521 H03

Fig. 7

Block diagram of H03

Feeder Protection Relay

REX 521
1MRS752177-MBG

Features (contd)

Standard configuration H04:

Three-phase non-directional overcurrent
protection with three stages
Three-phase directional overcurrent protection with one stage

3I >
3I>

67

I0 >

67N

Underfrequency or overfrequency protection with one stage

Three-phase transformer inrush and motor
start-up current detector

I0 >

50N/51N

f</f>

81U/81O

3I2f>

68

I>

46

Non-directional earth-fault protection with

three stages

Three-phase thermal protection for cable

Supervision function for energizing current
input circuit
Supervision function for energizing voltage
input circuit
Current waveform distortion measurement
Voltage waveform distortion measurement
Three-phase current measurement
Neutral current measurement
Three phase voltage measurements
Residual voltage measurement

MCS

000

TCS1
CBCM

3I~harm

I
R

3U~harm

Directional earth-fault protection with three

stages

Phase discontinuity protection for three

phases

50/51

49F

79

CBFP

*/62

LO

86

3I

3U

U0

pf

REX 521 H04

Fig. 8

Block diagram of H04

Standard configuration H05:

Three-phase non-directional overcurrent
protection with three stages
Non-directional earth-fault protection with
three stages
Three-phase overvoltage protection with
two stages

System frequency measurement

Three-phase undervoltage protection with

two stages

Three-phase power and energy measurement

Residual overvoltage protection with three

stages

Calculation of the accumulated electric

breaker wear of the circuit breaker (CB)

Three-phase transformer inrush and motor

start-up current detector

Transient disturbance recorder

Three-phase thermal overload protection

for devices

Trip-circuit supervision
Delayed trip output for the circuit-breaker
failure protection (CBFP) function

Supervision function for energizing current

input circuit

Automatic reclosing 1...5 shots

Supervision function for energizing voltage

input circuit

Circuit breaker control with indication

Current waveform distortion measurement

Lockout function

Voltage waveform distortion measurement

Object indication

Three-phase current measurement

Logic control position selector

Neutral current measurement

User-configurable I/Os

Three phase voltage measurements

Interlocking

Residual voltage measurement

User-configurable alarm LEDs

System frequency measurement

Three-phase power and energy measurement

Feeder Protection Relay

REX 521
1MRS752177-MBG

Features (contd)

Calculation of the accumulated electric

breaker wear of the circuit breaker (CB)

Supervision function for energizing current

input circuit

Transient disturbance recorder

Supervision function for energizing voltage

input circuit

Trip-circuit supervision
Delayed trip output for the circuit-breaker
failure protection (CBFP) function

Current waveform distortion measurement

Voltage waveform distortion measurement

Circuit breaker control with indication

Three-phase current measurement

Lockout function

Neutral current measurement

Object indication

Three phase voltage measurements

Logic control position selector

Residual voltage measurement

User-configurable I/Os

System frequency measurement

Interlocking

Three-phase power and energy measurement

User-configurable alarm LEDs

Calculation of the accumulated electric

breaker wear of the circuit breaker (CB)
3I >
I 0>
3I2f

50/51
50N/51N
68

MCS

000

Trip-circuit supervision

CBCM

3I~harm
U 0>

59N

3U>

59

3U<

27

CBFP

86

49

Delayed trip output for the circuit-breaker

failure protection (CBFP) function

Circuit breaker control with indication

3U~harm

Lockout function
I0

3U

U0

pf

3I

Object indication
Logic control position selector

*/62

LO

Transient disturbance recorder

TCS

User-configurable I/Os
Interlocking
User-configurable alarm LEDs

Fig. 9

Block diagram of H05

3I >

50/51

Standard configuration H06:

U 0>

59N

Three-phase non-directional overcurrent

protection with two stages

3U>

59

Three-phase overvoltage protection with

two stages

3U<

27

f</f>

81U/81O

Three-phase undervoltage protection with

two stages
Residual overvoltage protection with three
stages
Underfrequency or overfrequency protection with two stages

MCS

000

TCS
CBCM

3I~harm

CBFP

62

LO

86

REX 521 H06

Fig. 10

I
R

3U~harm

3I

I0

3U

U0

pf

Block diagram of H06

Feeder Protection Relay

REX 521
1MRS752177-MBG

Features (contd)

Standard configuration H07:

Logic control position selector

Three-phase non-directional overcurrent

protection with three stages

User-configurable I/Os

Non-directional earth-fault protection with

two stages

User-configurable alarm LEDs

Interlocking

Directional earth-fault protection with two

stages
Three-phase overvoltage protection with
two stages

3I>
I0>

I0>

Three-phase undervoltage protection with

two stages

Three-phase motor start-up supervision

Three-phase thermal overload protection
for devices

50N/51N
59

3U<

27

f</f>
Is2t,n<

3I
3I

CBCM

I
R

3I

I0

3U

U0

pf

48,14,66

I2>

46

3I<

37

U1<
U2>
U1>

60

27,47,59

CBFP

LO

49

Fig. 11

81U/81O

46R

Fuse failure protection

Supervision function for energizing voltage

input circuit

TCS

3U>

Phase sequence voltage protection

Supervision function for energizing current

input circuit

67N

000

3U~harm

Phase reversal protection

Three-phase non-directional undercurrent

protection with one stage

MCS

3I~harm

Underfrequency or overfrequency protection with one stage

Negative phase sequence (NPS) protection with two stages

50/51

*/62
86

Block diagram of H07

Current waveform distortion measurement

Voltage waveform distortion measurement

Standard configuration H08:

Three-phase current measurement

Three-phase non-directional overcurrent

protection with three stages

Neutral current measurement

Three-phase voltage measurements
Residual voltage measurement
System frequency measurement
Three-phase power and energy measurement
Calculation of the accumulated electric
breaker wear of the circuit breaker (CB)
Transient disturbance recorder
Trip-circuit supervision
Delayed trip output for the circuit breaker
failure protection (CBFP) function
Circuit breaker control with indication
Operation time counter

Non-directional earth-fault protection with

three stages
Three-phase overvoltage protection with
two stages
Three-phase undervoltage protection with
two stages
Residual overvoltage protection with three
stages
Three-phase transformer inrush and motor
start-up current detector
Three-phase thermal overload protection
for devices
Supervision function for energizing current
input circuit

Lockout function

Supervision function for energizing voltage

input circuit

Object indication

Current waveform distortion measurement

Voltage waveform distortion measurement

10

Feeder Protection Relay

REX 521
1MRS752177-MBG

Features (contd)

Three-phase current measurement

Standard configuration H09:

Neutral current measurement

Three-phase non-directional overcurrent

protection with three stages

Three phase voltage measurements

Non-directional earth-fault protection with

three stages

Residual voltage measurement

System frequency measurement
Three-phase power and energy measurement
Calculation of the accumulated electric
breaker wear of the circuit breaker (CB)
Transient disturbance recorder
Trip-circuit supervision
Delayed trip output for the circuit-breaker
failure protection (CBFP) function
Circuit breaker control with indication

Three-phase overvoltage protection with

two stages
Three-phase undervoltage protection with
two stages
Residual overvoltage protection with three
stages
Three-phase transformer inrush and motor
start-up current detector
Underfrequency or overfrequency protection with two stages
Supervision function for energizing current
input circuit

Lockout function
Object indication
Logic control position selector

Supervision function for energizing voltage

input circuit

User-configurable I/Os

Current waveform distortion measurement

Interlocking

Voltage waveform distortion measurement

User-configurable alarm LEDs

Three-phase current measurement

Automatic reclosing 1...5 shots

3I >

50/51

I 0>

50N/51N

3I2f

68

U 0>

59N

3U>

59

3U<

27

MCS

Three phase voltage measurements

TCS
CBCM

3I~harm

CBFP

*/62

LO

86

49

Neutral current measurement

000

Residual voltage measurement

System frequency measurement

Three-phase power and energy measurement

3U~harm

3I

3U

I0

U0

3U_B

Transient disturbance recorder

Trip-circuit supervision

pf

Fig. 12

Calculation of the accumulated electric

breaker wear of the circuit breaker (CB)

Block diagram of H08

Note! The standard configuration H08 is

available only with the voltage transformer
(VT) HW version.VTs are used to measure
phase-to-earth voltages.

Delayed trip output for the circuit-breaker

failure protection (CBFP) function
Circuit breaker control with indication
Lockout function
Object indication
Logic control position selector
User-configurable I/Os
Interlocking
User-configurable alarm LEDs

11

Feeder Protection Relay

REX 521
1MRS752177-MBG

Features (contd)

Three-phase current measurement

3I >

50/51

I 0>

50N/51N

3I2f

68

U 0>

59N

3U>

59

3U<

27

MCS

Three phase voltage measurements

TCS
CBCM

3I~harm

CBFP

*/62

81U/81O

f</f>

Fig. 13

Residual voltage measurement

System frequency measurement

Three-phase power and energy measurement

3U~harm

3I

3U

I0

U0

3U_B

86

LO

Neutral current measurement

000

Calculation of the accumulated electric

breaker wear of the circuit breaker (CB)
Transient disturbance recorder
Trip-circuit supervision

79

pf

Block diagram of H09

Note! The standard configuration H09 is

available only with the voltage transformer
(VT) HW version. VTs are used to measure
phase-to-earth voltages.
Standard configuration H50:
Three-phase non-directional overcurrent
protection with three stages.

Delayed trip output for the circuit-breaker

failure protection (CBFP) function
Automatic reclosing 1...5 shots
Circuit breaker control with indication
Lockout function
Object indication
Logic control position selector
User-configurable I/Os
Interlocking
User-configurable alarm LEDs

Three-phase directional overcurrent protection with two stages

3I>

50/51

MCS

I0>

50N/51N

TCS

3I2f

68

U0>

59N

3U>

59

3U<

27

CBFP

*/62

LO

86

Directional earth-fault protection with two

stages
Non-directional earth-fault protection with
two stages

Residual overvoltage protection with two

stages

Phase-sequence voltage protection

Supervision function for energizing current
input circuit
Supervision function for energizing voltage
input circuit
Current waveform distortion measurement
Voltage waveform distortion measurement

12

3I~harm

3I>

Three-phase transformer inrush and motor

start-up current detector
Underfrequency or overfrequency protection with two stages

CBCM

3U~harm

Three-phase overvoltage protection with

two stages
Three-phase undervoltage protection with
two stages

000

67

U1<
U2>
U1>

3U

U
0

pf

27,47,59
67N

I0 >
f</f>
O

3I

81U/81O
I

79

Fig. 14 Block diagram of H50

Note! The standard configuration H50 is
available only with the voltage transformer
(VT).

Feeder Protection Relay

REX 521
1MRS752177-MBG

Features (contd)

Standard configuration H51:

Transient disturbance recorder

Three-phase non-directional overcurrent

protection with three stages.

Trip-circuit supervision

Three-phase directional overcurrent protection with one stage.

Delayed trip output for the circuit breaker

failure protection (CBFP) function
Circuit breaker control with indication

Non-directional earth-fault protection with

two stages

Operation time counter

Directional earth-fault protection with two

stages

Object indication

Three-phase overvoltage protection with

one stage
Three-phase undervoltage protection with
one stage

Lockout function
Logic control position selector
User-configurable I/Os
Interlocking
User-configurable alarm LEDs

Underfrequency or overfrequency protection with two stages

Negative phase-sequence (NPS) protection with one stage
Three-phase motor start-up supervision
Three-phase thermal overload protection
for devices
Residual overvoltage protection with one
stage
Phase-sequence voltage protection
Fuse-failure protection
Three-phase non-directional undercurrent
protection with one stage
Supervision function for energizing current
input circuit
Supervision function for energizing voltage
input circuit
Current waveform distortion measurement
Voltage waveform distortion measurement
Three-phase current measurement
Neutral current measurement
Three-phase voltage measurements
Residual voltage measurement
System frequency measurement
Three-phase power and energy measurement
Calculation of the accumulated electric
breaker wear of the circuit breaker (CB)

3I>
I0 >

50/51

MCS

67N

TCS

I0>

50N/51N

3U>

59

3U<

27

f</f>

81U/81O

Is2t,n<

48,14,66

000

CBCM
3I~harm

3U~harm

3I
3I

3U

U
0

pf

46R

I2>

46

U0>

59N

60
49

U1<
U2>
U1>

27,47,59

CBFP

*/62

LO

86

3I>

3I

67

Fig. 15 Block diagram of H51

Note! The standard configuration H51 is
available only with the voltage transformer
(VT).

13

Feeder Protection Relay

REX 521
1MRS752177-MBG

Applications

Several standard configurations are available

for the protection relay. Refer to the REX 521
Technical Reference Manual, Standard Configurations for more detailed information.
The B01 standard configuration for REX 521
is designed to be used in single busbar systems using one circuit breaker for selective
short-circuit, time overcurrent and earth-fault
protection of radial isolated neutral networks,
solidly earthed networks, resistant earthed
networks and resonant earthed networks.
The B02 standard configuration is designed
to be used in single busbar systems using one
circuit-breaker for selective short-circuit protection, time-overcurrent protection, earthfault protection and automatic reclosing. The
configuration can be used in different types of
networks such as radial isolated neutral networks, solidly earthed networks, resistant
earthed networks and resonant earthed networks.
The M01 standard configuration is designed
to be used in single busbar systems using one
circuit-breaker for selective short-circuit,
time overcurrent and directional earth-fault
protection of radial isolated neutral networks,
solidly earthed networks, resistant earthed
networks and resonant earthed networks.
The M02 standard configuration is designed
to be used in single busbar systems using one
circuit-breaker for selective short-circuit protection, time-overcurrent protection, directional earth-fault protection and automatic
reclosing. The configuration can be used in
different types of networks such as of radial
isolated neutral networks, solidly earthed networks, resistant earthed networks and resonant earthed networks.
The H01 standard configuration is designed
to be used in single busbar systems using one
circuit-breaker for selective directional and
non-directional short-circuit protection,
directional time-overcurrent protection,
directional earth-fault protection and automatic reclosing with syncro- and voltagecheck functionality.
The H02 standard configuration is designed
to be used in single busbar systems using one
circuit-breaker for selective directional and
non-directional short-circuit protection,
directional and non-directional time-overcurrent protection, directional earth-fault protection and automatic reclosing.

14

The H03 standard configuration is designed

to be used in single busbar systems using one
circuit-breaker for selective non-directional
short-circuit protection, non-directional timeovercurrent protection, directional earth-fault
protection and automatic reclosing with syncro- and voltage-check functionality.
The H04 standard configuration is designed
to be used in single busbar systems using one
circuit-breaker for selective non-directional
short-circuit protection, non-directional timeovercurrent protection, directional and nondirectional earth-fault protection and automatic reclosing.
The H05 standard configuration is designed
to be used in single busbar systems using one
circuit-breaker for selective non-directional
short-circuit protection, non-directional timeovercurrent protection, non-directional earthfault protection, overvoltage protection,
undervoltage protection, residual overvoltage protection and thermal overload protection for devices.
The H06 standard configuration is designed
to be used in single busbar systems using one
circuit-breaker for selective non-directional
short-circuit protection, non-directional timeovercurrent protection, overvoltage protection, undervoltage protection, residual overvoltage protection, underfrequency protection
and overfrequency protection.
The H07 standard configuration is designed
for protection of large or medium-size threephase AC motors in circuit-breaker controlled
motor drives. Due to the large number of protective functions integrated, the relay provides a complete protection against motor
damage caused by electrical faults. The H07
configuration can also be applied to other
objects needing thermal overload protection,
such as power transformers. It can also be
used in applications requiring overcurrent
protection, under or overvoltage protection
and/or directional or non-directional earthfault protection.
The H08 standard configuration is designed
to be used in single busbar systems using one
circuit-breaker for selective non-directional
short-circuit protection, non-directional timeovercurrent protection, non-directional earthfault protection, overvoltage protection,
undervoltage protection, residual overvoltage protection and thermal overload protection for devices. The protection is based on

Feeder Protection Relay

REX 521
1MRS752177-MBG

Applications (contd)

phase-to-earth voltages. In addition, phase-tophase voltages are available in the measurement view.
The H09 standard configuration for REX 521
is designed to be used in single busbar systems using one circuit breaker for selective
non-directional short-circuit protection, nondirectional time-overcurrent protection, nondirectional earth-fault protection, overvoltage protection, undervoltage protection,
residual overvoltage protection, underfrequency protection, overfrequency protection
and automatic reclosing.
The H50 standard configuration for REX 521
is designed to be used in single busbar systems by using one circuit breaker for selective
non-directional short-circuit protection,
directional and non-directional time-overcurrent protection, directional and/or non-directional earth-fault protection, overvoltage

protection, undervoltage protection, residual

overvoltage protection, underfrequency protection, over-frequency protection and automatic reclosing.
The H51 standard configuration for REX 521
is designed for protection of large or mediumsize three-phase AC motors in circuit breaker
controlled motor drives. Due to the large
number of protective functions integrated, the
relay provides a complete protection against
motor damage caused by electrical faults.
The H51 configuration can be applied to
other objects that need the thermal overload
protection (such as power transformers). It
can also be used in applications requiring
overcurrent protection, directional overcurrent protection, under/overvoltage protection, directional or non-directional earth-fault
protection, underfrequency protection and/or
overfrequency protection.

15

Feeder Protection Relay

REX 521
1MRS752177-MBG

Design, hardware

Different hardware versions of REX 521 are

shown in the table below.
Table 1: REX 521 hardware versions
Sensor
REX521xSxxx

Transformers
Current transformers 1/5 A
Current transformers 0.2/1 A
Voltage transformers 100 V

High
REX521xHxxx

Transformer modules (MIM)

Medium
REX521xMxxx

REX 521
Basic
REX521xBxxx

Relay type
Version name

4
1
1

4
1
4

1
1
1

Sensor channels
Current sensor inputs
Voltage sensor inputs
Main CPU modules

3
3
1

CPU_SP (SPA/ IEC plastic)

CPU_SG (SPA/ IEC glass)
CPU_LP (SPA/ IEC/ LON plastic)
CPU_LG (SPA/ IEC/ LON glass)
Power supply modules
PS_87H (DItresh.=80 VDC)
PS_87L (DItresh.=18 VDC)
Display module
6 x 16 character display

16

Digital inputs

High-speed power outputs

Power outputs (PO)

Signalling outputs (SO)

IRF outputs

Trip-circuit supervision (TCS)

Feeder Protection Relay

REX 521
1MRS752177-MBG

Design, software

Functionality is available as part of the standard configurations B01, B02, M01, M02,
H01, H02, H03, H04, H05, H06, H07, H08,
H09, H50 and H51.

Functions available for use in the different

standard configurations are listed below.

Table 2: Standard configurations for REX 521

HW versions

Basic

Standard configurations

Medium

High/Sensor

B01 B02 M01 M02 H011 H02 H03 H04 H05 H06 H07 H0823 H0923 H502 H512

ANSI
device
number

FB name
(CD-ROM)

3I>
3I>>
3I>>>
Io>

51-1
51-2
51-3
51N-1

NOC3Low
NOC3High
NOC3Inst
NEF1Low

x
x
x
x

x
x
x
x

Io>>

51N-2

NEF1High

Io>>>

51N-3

NEF1Inst

Io>-->5

67N-1

DEF2Low

Io>>-->5

67N-2

DEF2High

Io>>>-->5
3I>-->

67N-3

DEF2Inst

67-1

DOC6Low

x6

3I>>-->

67-2

DOC6High

x6

3U>
3U>>
3U<
3U<<
3I2f>
Iub>
3Ith>
O-->I
Uo>
Uo>>
Uo>>>
f1
f2
SYNC1
Is2t n<
3I()
I2>
I2>>
3I<
FUSEF
3Ithdev>
U1U2<>_1

59-1
59-2
27-1
27-2
68
46
49F
79
59N-1
59N-2
59N-3
81-1
81-2
25-1
48
46R
46-1
46-2
37-1
60
49M/G/T
47-1

OV3Low
OV3High
UV3Low
UV3High
Inrush3
CUB3Low
TOL3Cab
AR5Func
ROV1Low
ROV1High
ROV1Inst
Freq1St1
Freq1St2
SCVCSt1
MotStart
PREV3
NPS3Low
NPS3High
NUC3St1
FuseFail
Tol3Dev
PSV3St1

IEC
symbol
Protection

x
x
x

x4

x
x
x
x

x4

x4

x
x
x
x

x
x
x

x
x
x

x
x
x

x
x
x
x

x
x
x

x
x
x
x

x
x
x
x

x
x
x

x
x
x

x
x
x
x

x
x
x
x

x
x
x
x

x
x
x
x

x
x
x
x

x
x
x
x

x
x
x
x

x
x
x
x
x
x

x
x
x
x
x

x
x

x
x
x
x

x
x
x
x
x

x
x
x
x

x
x
x
x
x

x
x
x
x

x
x
x
x
x

x
x
x
x
x

x
x
x
x
x
x

x
x
x

x
x

x
x

x
x
x
x
x
x
x
x
x

x
x
x

x
x
x

x
x
x

x
x
x

Control functions
I<->O CB1 COCB1
I<->O IND1 COIND1
I<->O IND2 COIND2

COCB1
COIND1
COIND2

x
x
x

x
x
x

x
x
x

x
x
x

x
x
x

x
x
x

x
x
x

x
x
x

x
x
x

x
x
x

x
x
x

x
x
x

x
x
x

17

Feeder Protection Relay

REX 521
1MRS752177-MBG

Table 2: Standard configurations for REX 521 (continued)

HW versions

Basic

ANSI
device
number

I<->O IND3 COIND3

High/Sensor

B01 B02 M01 M02 H011 H02 H03 H04 H05 H06 H07 H0823 H0923 H502 H512

Standard configurations
IEC
symbol

Medium

FB name
(CD-ROM)
COIND3
x
x

x
x

x
x

x
x

x
x

x
x

x
x

x
x

x
x

x
x

x7
x
x

MECU3A
MECU1A
MEVO1A
MEDREC
MEVO3A
MEVO3B
MEFR1
MEPE7
MEAI1

x
x

x
x

x
x
x
x

x
x
x
x

x
x
x
x
x

x
x
x
x
x

x
x
x
x
x

x
x
x
x
x

x
x
x
x
x

x
x
x
x
x

x
x
x
x
x

x
x

x
x

x
x

x
x

x
x

x
x

x
x
x

CMBWEAR1
CMTCS1
CMCU3
CMVO3
CMTIME1

x
x
x

x
x
x

x
x
x

x
x
x

x
x
x
x

x
x
x
x

x
x
x
x

x
x
x
x

x
x
x
x

x
x
x
x

I<->O POS COLOCAT COLOCAT

ALARM1-8 ALARM1-8 MMIALAR1-8

x
x

x
x

x
x

x7
x
x

x
x
x
x
x
x
x
x

x
x
x
x
x
x
x
x

x
x
x
x
x

x
x
x
x
x

x
x

x
x
x

x
x
x
x
x

x
x
x
x

x
x
x
x

x
x
x
x

x
x
x
x
x

Measurement
3I
Io
Uo
DREC
3U
3U_B
f
PQE
AI1

3I
Io
Uo
DREC
3U
3U_B
f
PQE
AI1

Condition monitoring
CB wear1
TCS1
MCS 3I
MCS 3U
TIME1

CB wear1
TCS1
MCS 3I
MCS 3U
TIME1

Power quality monitoring

PQ 3Inf
PQ 3Unf

PQ 3Inf
PQ 3Unf

PQCU3H
PQVO3H

x
x

x
x

x
x

x
x

x
x

x
x

x
x

x
x

x
x

x
x

x
x

SWGRP

SWGRP

Standard
SWGRP
1

H01 available only as sensor version

Available only as VT version

VTs are used to measure phase-to-earth voltages, calculated phase-to-phase voltages are shown by 3U_B

4Configured

fixedly to the Io (1/5 A) channel or Ios if selected

Can be used as Io>, Io>> and Io>>> or Uo>, Uo>> and Uo>>> function block with some limitations

3I>-> and 3I>>-> cannot be set to operate as 3I>, 3I>> or 3I>>>

Motor status indication

Note: Calculated Uo (Uos) is used in the Sensor versions of H01 and H03 configurations.
Calculated Io (Ios) is available in H01-H05,
H08, H09 and H50 configurations.

18

For more information, see REX 521 Technical Reference Manual, Standard Configurations.

Feeder Protection Relay

REX 521
1MRS752177-MBG

Technical data
Table 3: Energizing inputs
Rated frequency
Current inputs

50.0/60.0 Hz
rated current

0,2 A/1 A/5 A

Thermal withstand
capability

Voltage inputs

Sensor inputs

continuously

1.5 A/4 A/20 A

for 1 s

20 A/100 A/500 A

dynamic current withstand, half-wave value

50 A/250 A/1250 A

input impedance

<750 m/<100m
<20 m

rated voltage

100 V/110 V/115

V/120 V (parametrization)

voltage withstand, continuous

2 x Un (240 V)

burden at rated voltage

<0.5 VA

voltage range RMS

9.4 V RMS

voltage range peak

12 V

input impedance

>4.7 M

input capacitance

<1 nF

Table 4: Auxiliary power supplies

Type

PS_87H
(REX521xxHxx)

PS_87L
(REX521xxLxx)

Input voltage, AC

110/120/220/240 V

Input voltage, DC

110/125/220 V

24/48/60 V

Voltage variation

AC 85110%, DC
80120% of rated value

DC 80120%
of rated value

Burden

<20 W

Ripple in DC auxiliary voltage

max. 12% of the rated DC value (IEC 60255-11)

Interruption time in auxiliary DC

voltage without resetting

<40 ms, 110 V

<100 ms, 200 V

<15 ms, 24 V
<50 ms, 48 V

Interruption time in auxiliary DC

voltage without resetting

<40 ms, 110 V

<100 ms, 200 V

<15 ms, 24 V
<50 ms, 48 V

Internal overtemperature
indication

+78C (+75+83C)

19

Feeder Protection Relay

REX 521
1MRS752177-MBG

Technical data (contd)

Table 5: Digital inputs
Type

PS_87H
(REX521xxHxx)

PS_87L
(REX521xxLxx)

Operating range, DC

80265 V DC
(for DI9 18...265 V)

18...265 V

Input voltage, DC

110/125/220 V
(for DI9 also
24/48/60 V)

24/48/60/110/125/
220 V

Current drain

~225 mA

Power consumption/input

<0.8 W

Table 6: Signal outputs

Max system voltage

250 V AC/DC

Continuous carry

5A

Make and carry for 0.5 s

10 A

Make and carry for 3 s

8A

Breaking capacity when control circuit timeconstant L/R <40 ms, at 48/110/220 V DC

1 A/0.25 A/0.15 A

Table 7: Power outputs

Max system voltage

250 V AC/DC

Continuous carry

5A

Make and carry for 0.5 s

30 A

Make and carry for 3 s

15 A

Breaking capacity when control circuit time

constant L/R <40 ms, at 48/110/220 V DC

5 A/3 A/1 A

Minimum contact load

100 mA, 24 V AC/DC (2.4 VA)

TCS (Trip-circuit
supervision)

20

Control voltage
range

20265 V AC/DC

Current drain
through the supervision circuit

approx. 1.5 mA (0.991.72 mA)

Minimum voltage
(threshold) over a
contact

20 V AC/DC (1520 V)

Feeder Protection Relay

REX 521
1MRS752177-MBG

Technical data (contd)

Table 8: Environmental conditions
Specified service temperature range

-10+55C

Transport and storage temperature range

-40+70C

Enclosure class

Front side, flush-mounted

IP 54

Rear side, connection terminals

IP 20

Dry heat test

according to IEC 60068-2-2

Dry cold test

according to IEC 60068-2-1

Damp heat test, cyclic

according to
IEC 60068-2-30,
r.h. >93%, T = 2555C

Storage temperature tests

according to
IEC 60068-2-48

Table 9: Standard tests

Insulation tests

Mechanical tests

Dielectric test
IEC 60255-5

Test voltage

2 kV, 50 Hz, 1 min.

Impulse voltage test

IEC 60255-5

Test voltage

5 kV, unipolar impulses,

waveform 1,2/50 s, source
energy 0.5 J

Insulation resistance measurements

IEC 60255-5

Insulation
resistance

> 100 M, 500 V DC

Vibration tests (sinusoidal)

IEC 60255-21-1, class I

Shock and bump test

IEC 60255-21-2, class I

Seismic test

IEC 60255-21-3, class 2

21

Feeder Protection Relay

REX 521
1MRS752177-MBG

Technical data (contd)

Table 10: Electromagnetic compatibility tests
The EMC immunity test level fulfills the requirements listed below

22

1 MHz burst disturbance test, class III,

IEC 60255-22-1

common mode

2.5 kV

differential mode

1.0 kV

Electrostatic discharge test,

class III
IEC 61000-4-2 and
60255-22-2

for contact discharge

6 kV

for air discharge

8 kV

Radio frequency
interference test

conducted, common mode

IEC 61000-4-6, IEC 60255-22-6

10 V (rms), f = 150
kHz80 MHz

radiated, amplitude-modulated
IEC 61000-4-3, IEC 60255-22-3

10 V/m (rms),
f = 801000 MHz

radiated, pulse-modulated
ENV 50204, IEC 60255-22-3

10 V/m, f = 900
MHz

Fast transient disturbance test

IEC 60255-22-4
and IEC 61000-4-4

power supply

4 kV

I/O ports

2 kV

Surge immunity test

IEC 61000-4-5 and
IEC 60255-22-5

power supply

2 kV, common
mode
1 kV, differential
mode

I/O ports

2 kV, common
mode
1 kV, differential
mode

Power frequency
(50 Hz)
magnetic field
IEC 61000-4-8

100 A/m continuous

300 A/m 1 to 3 s

Voltage dips and

short interruptions
IEC 61000-4-11

30%, 10 ms; 60%, 100 ms; 60%, 1000 ms

>90%, 5000 ms

Electromagnetic
emission tests
EN 55011 and
EN 60255-25

conducted RF emission (mains terminal)

EN 55011, class A,
EN 60255-25

radiated RF emission

EN 55011, class A
EN 60255-25

CE approval

Complies with the EMC directive

89/336/EEC and
the LV directive 73/23/EEC.

EN 50263
EN 50081-2
EN 61000-6-2
EN 60255-6

Feeder Protection Relay

REX 521
1MRS752177-MBG

Technical data (contd)

Table 11: Data communication
Rear interface,
connector X3.2 and X3.3

Fibre-optic interface
protocol

SPA, IEC_103, Modbus,

DNP 3.0
Also LON in the
REX 521 xxxxL versions.

Using SPA-ZC 402 SPA/Ethernet adapter:

protocols
Rear interface,
connector X3.1:9,10

IEC 61850 and SPA TCP/IP

RS-485 connection
protocols

SPA, Modbus, DNP 3.0

Using SPA-ZC 302 Profibus-DPV1/SPA Gateway:

protocol
Front panel

optical RS 232 connection

protocol

SPA protocol

IEC_103 protocol

Modbus protocol

DNP 3.0 protocol

LON protocol

Profibus
SPA

communication cable

1MCK 950001-2

baud rates

4.8/9.6/19.2 kbps

start bits

data bits

parity

even

stop bits

baud rates

9.6/19.2 kbps

data bits

parity

even

stop bits

baud rates

0.6/1.2/2.4/4.8/9.6/19.2 kbps

data bits

7/8 (ASCII/RTU)

parity

no parity/odd/even

stop bits

1/2

Modbus modes

ASCII, RTU

baud rates

0.3/0.6/1.2/2.4/4.8/9.6/19.2
kbps

data bits

parity

no parity/odd/even

stop bits

1/2

bit rates

78.0 kbps/1.25 Mbps

23

Feeder Protection Relay

REX 521
1MRS752177-MBG

Technical data (contd)

Table 12: General

24

Toolboxes

CAP 501, CAP 505, LIB 510, SMS 510

110

All events are recorded in higher level syntax: reason, time, date are in clear text format in the selected language. The last 50
events are recorded.

Data recording

Records operate values

Protection functions

See REX 521 Technical Reference Manual,

Standard Configurations (see References on page 32).

Control functions

See REX 521 Technical Reference Manual,

Standard Configurations (see References on page 32).

Condition monitoring functions

See REX 521 Technical Reference Manual,

Standard Configurations (see References on page 32).

Measurement functions

See REX 521 Technical Reference Manual,

Standard Configurations (see References on page 32).

Self-supervision

See REX 521 Technical Reference Manual,

General (see References on page 32).

Mechanical dimensions

Width: 148.8 mm (1/3 of a 19 rack)

Height, frame: 265.9 mm (6U)
Height, box: 249.8 mm
Depth: 235 mm
For dimension drawings, refer to Installation Manual (see References on
page 32).

Weight of the unit

<5 kg

Feeder Protection Relay

REX 521
1MRS752177-MBG

Terminal diagram of the REX 521: Basic

A
+

Q0

L1

L3

*)

+
ACFail

X1.1

Mains
-

TempAlarm

P1

L1

L3

S1

1
2

5
4

IRF

S2

P2

X4.1

3
8
7

S1
12
11
10
9
8
7
6
5
4
3
2
1

S2

1A
5A

CT4

I0

1A
5A

CT3

IL3

1A
5A

CT2

IL2

1A
5A

CT1

IL1

SO1

6
10
11

SO2

9
12
13

PO1

14
15

PO2
17
18

PO3

X4.2
4
3
2

**)

HSPO1
TCS1

X4.2

5
6

DI1

DI2

8
9

SERIAL BUS

X3.2

DI3

10

DI4

11
12

DI5

13
14

DI6

15
16

DI7

17
18

DI8

X3.3

X3.1
1
2
9

*) Power flow direction

**) The jumper is not assembled by default when
the protection relay is delivered

10

DI9
DATA A
DATA B

RS-485

A051916

25

Feeder Protection Relay

REX 521
1MRS752177-MBG

Terminal diagram of the REX 521: Medium

A
+

Q0

L1

L3

*)

dn

da

+
ACFail

X1.1

Mains

Source
-

TempAlarm

P1

L1

L3

S1

18
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1

S1
S2

1
2

5
4

IRF

S2

P2

X4.1

100V

VT1

U0

0,2A
1A

CT5

I0B

1A
5A

CT4

I0

1A
5A

CT3

IL3

1A
5A

CT2

IL2

1A
5A

CT1

IL1

8
7

SO1

6
10
11

SO2

9
12
13

PO1

14
15

PO2
17
18

PO3

X4.2
4
3
2

**)

HSPO1
TCS1

X4.2

5
6

DI1

DI2

8
9

SERIAL BUS

X3.2

DI3

10

DI4

11
12

DI5

13
14

DI6

15
16

DI7

17
18

DI8

SERIAL BUS

X3.3

X3.1
1
2
9
10

DI9
DATA A
DATA B

RS-485

*) Power flow direction

**) The jumper is not assembled by default
when the protection relay is delivered

A051917

26

Feeder Protection Relay

REX 521
1MRS752177-MBG

Terminal diagram of the REX 521: High, excluding H08 and H09

A
+

Q0

L1

L3

N
n

*)

dn

da

+
X1.1
27

P1

L1

L3

25
24

S1

22
21

S2

P2

19
18
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1

S1
S2

ACFail

VT4

100V

VT3

100V

U31**)
U23

100V

VT2

U12

100V

VT1

U0

0,2A
1A

CT5

I0B

1A
5A

CT4

I0

1A
5A

CT3

IL3

1A
5A

CT2

IL2

1A
5A

CT1

IL1

Mains
-

TempAlarm

X4.1
1
2

5
4

IRF

3
8
7

SO1

6
10
11

SO2

9
12
13

PO1

14
15

PO2
17
18

PO3

X4.2
4
3
2

***)

HSPO1
TCS1

X4.2

5
6

DI1

DI2

8
9

SERIAL BUS

X3.2

DI3

10

DI4

11
12

DI5

13
14

DI6

15
16

DI7

17
18

DI8

SERIAL BUS

X3.3

X3.1
1
2

*) Power flow direction

**) Connected to U12b in H03
***) The jumper is not assembled by default
when the protection relay is delivered

DI9

DATA A

10

DATA B

RS-485

A051918

27

Feeder Protection Relay

REX 521
1MRS752177-MBG

Terminal diagram of the REX 521: High, H08 and H09

A
+

Q0

L1

L3

N
n

*)

dn

da

+
X1.1
27

P1

L1

L3

25
24

S1

22
21

S2

P2

19
18
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1

S1
S2

ACFail

VT4

100V

VT3

100V

U3

100V

U1

100V

VT1

U0

0,2A
1A

CT5

I0B

1A
5A

CT4

I0

1A
5A

CT3

IL3

1A
5A

CT2

IL2

1A
5A

CT1

IL1

TempAlarm

U2

VT2

Mains

X4.1
1
2

5
4

IRF

3
8
7

SO1

6
10
11

SO2

9
12
13

PO1

14
15

PO2
17
18

PO3

X4.2
4
3
2

**)

HSPO1
TCS1

X4.2

5
6

DI1

DI2

8
9

SERIAL BUS

X3.2

DI3

10

DI4

11
12

DI5

13
14

DI6

15
16

DI7

17
18

DI8

SERIAL BUS

X3.3

X3.1
1
2

*) Power flow direction

**) The jumper is not assembled by default
when the protection relay is delivered

DI9

DATA A

10

DATA B

RS-485

A051919

28

Feeder Protection Relay

REX 521
1MRS752177-MBG

Terminal diagram of the REX 521: Sensor

+
ACFail

X1.1
27

Voltage input, U3

X2.1

Voltage input, U2

X2.2

Voltage input, U1

X2.3

Current input, IL3

X2.4

Current input, IL2

X2.5

Current input, IL1

X2.6

X4.1
1
2

5
4

IRF

22
21

16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1

TempAlarm

25
24

19
18

Mains

100V

VT1

U0 *)

0,2A
1A

CT5

I0B

1A
5A

CT4

8
7

SO1

6
10
11

SO2

9
12
13

I0

PO1

Sensor

VD3

Sensor

VD2

Sensor

VD1

14
15

DIFF

PO2
17
18

DIFF

DIFF

Sensor

RS3

Sensor

RS2

Sensor

RS1

PO3

DIFF

DIFF

DIFF

X4.2
4
3
2

**)

HSPO1
TCS1

X4.2
5
6

DI1

DI2

8
9

SERIAL BUS

X3.2

DI3

10

DI4

11
12

DI5

13
14

DI6

15
16

DI7

17
18

DI8

SERIAL BUS

X3.3

X3.1
1
2
9
10

DI9
DATA A
DATA B

RS-485

*) Connected to U12b in H01S and H03S

**) The jumper is not assembled by default
when the protection relay is delivered
A051920

29

Feeder Protection Relay

REX 521
1MRS752177-MBG

Ordering information

When ordering REX 521 protection relays,

specify the following:
order number
quantity
additional language

Each protection relay has a specific order

number that identifies the protection relay
type as well as the hardware and the software
as described in the figure below. The order
number is labelled on the marking strip on the
front panel of the relay delivered, for example,
Order No: REX521GMHPSM01G..

optional Chinese front panel (Order No:

2RCA025000A0001)

REX521GMHPSM01G XX

Display language (see the table about display language codes)

Configuration revision
Configuration name: B01, B02, M01, M02, H01, H02, H03, H04, H05,
H06, H07, H08, H09, H50, H51
Rear communication: S=SPA/IEC/Modbus/DNP 3.0
L=SPA/IEC/Modbus/DNP 3.0/LON
Optical connectors for rear communication: P = plastic-fibre
G = glass-fibre
Power supply:
H = PS_87H, L = PS_87L
Type of hardware:
B = Basic, M = Medium, H = High, S = High sensor
Revision

A051925

English is always available in REX 521.

When ordering, the additional language must
be defined according to the table:

Code

Language combination

FI

English-Finnish

SE

English-Swedish

DE

English-German

ES

English-Spanish

FR

English-French

PT

English-Portuguese

PL

English-Polish

ZH

English-Chinese

Accessories
Semi-flush mounting kit
Wall mounting kit
Rack mounting kits:
Enclosure size (x 19):
1/2 + 1/3
1/3
1/3 + 1/3
1/3 + 1/3 + 1/4
1/4 + 1/4 + 1/3
1/3 + 1/4
Connection cable for front
panel connector

30

1MRS050254
1MRS050240
Mounting kit order number:
1MRS050241 and 1MRS050238
1MRS050258
1MRS050241 and 1MRS050377
1MRS050241 (2 pcs) and 1MRS050381
1MRS050241 (2 pcs) and 1MRS050382
1MRS050609 and 1MRS050241

1MKC950001-2

Feeder Protection Relay

REX 521
1MRS752177-MBG

Ordering information
(contd)

Configuration, setting and SA system

tools
The following tool versions are needed to
support the new functions and features of
Release Q1/2006 revisions of REX 521:
CAP 501 Relay Configuration Tool;
CAP 501 v.2.4.0 or later

CAP 505 Relay Configuration Tool;

CAP 505 v. v.2.4.0 or later
LIB 500 Library for MicroSCADA Pro;
LIB 500 v.4.2-1 or later
LIB 510 Library for MicroSCADA Pro;
LIB 510 v.4.2-1 or later
SMS 510 v.1.3.0 or later

31

Feeder Protection Relay

REX 521
1MRS752177-MBG

References

Manuals for REX 521

Installation Manual
Operators Manual
Technical Reference manual, General
Technical Reference Manual, Standard Configurations
Technical Descriptions of Functions (CD-ROM v. 2.10 or later)
Modbus Remote Communication Protocol for REX 521,
Technical Description
DNP 3.0 Remote Communication Protocol for REF 54_, RET
54_ and REX 521, Technical Description

1MRS750526-MUM
1MRS751107-MUM
1MRS751108-MUM
1MRS751802-MUM
1MRS750889-MCD

1MRS755017

1MRS755260

Parameter and event lists for REX 521

Parameter List for REX 521

Event List for REX 521
General Parameters for REX 521
Interoperability List for REX 521

1MRS751999-RTI
1MRS752000-RTI
1MRS752156-RTI
1MRS752157-RTI

Tool-specific manuals

CAP505 Installation and Commissioning Manual

CAP505 Users Guide
CAP505 Protocol Mapping Tool Operators Manual
CAP501 Installation and Commissioning Manual
CAP501 Users Guide
Tools for Relays and Terminals, Users Guide

For more information, see:

http://www.abb.com/substationautomation

32

1MRS751901-MEN
1MRS752292-MEN
1MRS755277
1MRS751899-MEN
1MRS751900-MUM
1MRS752008-MUM

ABB Oy
Distribution Automation
P.O. Box 699
FI-65101 Vaasa, FINLAND
Tel +358 10 22 11
Fax +358 10 224 1094
www.abb.com/substationautomation