0% found this document useful (0 votes)
97 views1 page

Open Loop Amplifier Model and Parameters: The Comparator

The document discusses an open loop operational amplifier model and its parameters. It describes how an op-amp can be modeled using linear circuit elements like resistors and voltage sources. An ideal op-amp model has infinite input resistance, zero output resistance, and infinite gain. Typical op-amps have high but finite input resistance, low output resistance, and very high gain. The model also notes that op-amps have positive and negative power rails that set the maximum output voltage. Finally, it explains that with very high gain, an op-amp will act as a comparator that outputs the positive or negative rail voltage depending on which input is at a higher voltage.

Uploaded by

iky77
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
97 views1 page

Open Loop Amplifier Model and Parameters: The Comparator

The document discusses an open loop operational amplifier model and its parameters. It describes how an op-amp can be modeled using linear circuit elements like resistors and voltage sources. An ideal op-amp model has infinite input resistance, zero output resistance, and infinite gain. Typical op-amps have high but finite input resistance, low output resistance, and very high gain. The model also notes that op-amps have positive and negative power rails that set the maximum output voltage. Finally, it explains that with very high gain, an op-amp will act as a comparator that outputs the positive or negative rail voltage depending on which input is at a higher voltage.

Uploaded by

iky77
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Open loop amplifier model and parameters

The operational amplifiers used in this class can be modeled for many practical applications, with a linear
circuit. That is to say, we can use linear elements weve already learned about to build a simple model of how
an amplifier would respond to changes in currents and voltages.

In the model above, vp and vn are referred to as the non-inverting and inverting terminals, respectively.
Ri and Ro are the input and output resistances, respectively.
In an ideal amplifier, Ri is infinite (that is, the input is an open circuit); R0 = 0 (that is, the voltage
source is shorted directly to vo) and A is infinite (more on this soon).
In typical op-amps, Ri > 108 , Ro < 10 , A > 106 V/V.
The power rails (the two terminals through which op amps receive power from an external supply) are
not shown in the model above. Sometimes they are drawn into the figure.
The positive rail (historically labelled VDD or VCC) sets the highest voltage the amplifier can output
(under any condition).
The negative rail (historically labelled VSS or VEE) sets the lowest voltage the amplifier can output (under
any condition).

The Comparator
Notice that if A is very high, the open loop amplifier above will likely be railed. That is, its output will be
either VDD or VSS. Why? Consider an amplifier with an A of 106 V/V, VDD = 10 V and VSS = -10 V. For
simplicity, assume Ri is infinite and R0 is 0 . For any input where vp vn > 10 V, the output will be 10 V.
Conversely, for any input where vp vn < -10 V, the output will be -10 V. This means for any reasonable
input voltage difference, the output will either be 10 V or -10 V (there is a very narrow range, between -10
V and 10 V, where the output is exactly A*(vp-vn) but it is negligible; the larger this A, the smaller this
linear range is). In this mode, the amplifier acts as a comparator; that is, it compares the inputs: if vp is
larger than vn, it outputs VDD; if vn is larger than vp, it outputs VSS.
Some material reproduced with permission from Ulaby, F. T., & Maharbiz, M. M. (2012). Circuits. 2nd Edition, NTS Press.

You might also like