Scribd
Upload
1K views2 pages

Wrench Clearances

The document provides specifications for wrench sizes for various bolt diameters. It lists the nominal bolt diameter, wrench opening across flats, and minimum dimensions for the wrench head ("A" and "B") according to American National and British standards. The specifications cover imperial and metric bolt sizes ranging from 1/4 inch to 1-1/2 inches and M5 to M33.

Uploaded by

camohunter71
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
1K views2 pages

Wrench Clearances

The document provides specifications for wrench sizes for various bolt diameters. It lists the nominal bolt diameter, wrench opening across flats, and minimum dimensions for the wrench head ("A" and "B") according to American National and British standards. The specifications cover imperial and metric bolt sizes ranging from 1/4 inch to 1-1/2 inches and M5 to M33.

Uploaded by

camohunter71
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 2

WRENCH

NOMINAL
OPENING
BOLT
---------DIA.
HEAD
ACROSS FLATS
1/ 4
5/16
3/ 8
7/16
1/ 2
5/ 8
3/ 4
7/ 8
1.00
1-1/8
1-1/4
1-3/8
1-1/2

7/16
1/ 2
9/16
5/ 8
3/ 4
15/16
1-1/8
1-5/16
1-1/2
1-11/16
1-7/8
2-1/16
2-1/4

0.438
0.500
0.563
0.625
0.750
0.938
1.125
1-5/16
1-1/2
1-11/16
1-7/8
2-1/16
2-1/4

"A"
MIN

"B"
MIN

"C"
REF

0.395
0.442
0.492
0.530
0.618
0.765
0.892
1.062
1.228
1.425
1.593
1.687
1.687

0.612
0.694
0.779
0.853
1.012
1.266
1.498
1.775
2.049
2.351
2.626
2.825
2.931

0.030
0.030
0.030
0.030
0.030
0.030
0.030
0.030
0.030
0.030
0.030
0.030
0.030

American National Standard and Unified Standard Hex and Heavy Hex Bolts ANSI/ASME B18.2.1-1996
From SAE Aeronautical Drafting Manual
ANSI/ASME B107.100 Wrenches

NOMINAL
BOLT
DIA.
M5
M6
M8
M10
M12
M16
M20
M22
M24
M27
M30
M33

WRENCH
OPENING
---------HEAD
ACROSS FLATS
8.0
10.0
13.0
17.0
19.0
24.0
30.0
32.0
36.0
41.0
46.0
50.0

0.315
0.394
0.512
0.669
0.748
0.945
1.181
1.260
1.417
1.614
1.811
1.969

"A"
MIN
8.26
10.16
12.31
15.41
16.63
19.81
24.51
25.66
28.81
32.21
34.76
38.76

0.325
0.400
0.485
0.607
0.655
0.780
0.965
1.010
1.134
1.268
1.369
1.526

"B"
MIN
11.98
15.04
18.89
24.25
26.35
32.65
40.73
43.03
48.47
54.68
60.06
66.33

British Standard BS 4190:2001 ISO Metric Black Hex Bolts, Screws & Nuts
From SAE Aeronautical Drafting Manual
ANSI/ASME B107.100 Wrenches

0.47165
0.59213
0.7437
0.95472
1.0374
1.28543
1.60354
1.69409
1.90827
2.15276
2.36457
2.61142

"C"
REF
0.762
0.762
0.762
0.762
0.762
0.762
0.762
0.762
0.762
0.762
0.762
0.762

0.030
0.030
0.030
0.030
0.030
0.030
0.030
0.030
0.030
0.030
0.030
0.030

You might also like