1

Abaqus 6.14-1

Date 31-Dec-2014

Time 13:48:

10
For use by Supplied By SSQ under license from Dassault Systemes or its subsid
iary.
1-d consolidation of a column of soil
....
STEP

GEOSTATIC STEP
1

INCREMENT

1
S T E P

STEP TIME
1

0.00
G E O S T A T I C

S T R E S S

N A L Y S I S
....

GEOSTATIC STEP

CONVERGENCE TOLERANCE PARAMETERS FOR FORCE

CRITERION FOR RESIDUAL FORCE
FOR A NONLINEAR PROBLEM
CRITERION FOR DISP.
CORRECTION IN A NONLINEAR PROBLEM
INITIAL VALUE OF TIME AVERAGE FORCE
AVERAGE FORCE
IS TIME AVERAGE FORCE
ALTERNATE CRIT. FOR RESIDUAL FORCE
FOR A NONLINEAR PROBLEM
CRITERION FOR ZERO FORCE
RELATIVE TO TIME AVRG. FORCE
CRITERION FOR RESIDUAL FORCE
WHEN THERE IS ZERO FLUX
CRITERION FOR DISP.
CORRECTION WHEN THERE IS ZERO FLUX
CRITERION FOR RESIDUAL FORCE
FOR A LINEAR INCREMENT
FIELD CONVERSION RATIO
CRITERION FOR ZERO FORCE
REL. TO TIME AVRG. MAX. FORCE
CRITERION FOR ZERO DISP.
RELATIVE TO CHARACTERISTIC LENGTH
CONVERGENCE TOLERANCE PARAMETERS FOR VOL. FLUX
CRITERION FOR RESIDUAL VOL. FLUX FOR A NONLINEAR PROBLEM
CRITERION FOR P.PRESS. CORRECTION IN A NONLINEAR PROBLEM
INITIAL VALUE OF TIME AVERAGE VOL. FLUX
AVERAGE VOL. FLUX IS TIME AVERAGE VOL. FLUX
ALTERNATE CRIT. FOR RESIDUAL VOL. FLUX FOR A NONLINEAR PROBLEM
CRITERION FOR ZERO VOL. FLUX RELATIVE TO TIME AVRG. VOL. FLUX
CRITERION FOR RESIDUAL VOL. FLUX WHEN THERE IS ZERO FLUX
CRITERION FOR P.PRESS. CORRECTION WHEN THERE IS ZERO FLUX
CRITERION FOR RESIDUAL VOL. FLUX FOR A LINEAR INCREMENT
FIELD CONVERSION RATIO
CRITERION FOR ZERO VOL. FLUX REL. TO TIME AVRG. MAX. VOL. FLUX
VOLUMETRIC STRAIN COMPATIBILITY TOLERANCE FOR HYBRID SOLIDS
AXIAL STRAIN COMPATIBILITY TOLERANCE FOR HYBRID BEAMS
TRANS. SHEAR STRAIN COMPATIBILITY TOLERANCE FOR HYBRID BEAMS
SOFT CONTACT CONSTRAINT COMPATIBILITY TOLERANCE FOR P>P0
SOFT CONTACT CONSTRAINT COMPATIBILITY TOLERANCE FOR P=0.0
CONTACT FORCE ERROR TOLERANCE FOR CONVERT SDI=YES
DISPLACEMENT COMPATIBILITY TOLERANCE FOR DCOUP ELEMENTS
ROTATION COMPATIBILITY TOLERANCE FOR DCOUP ELEMENTS
EQUILIBRIUM WILL BE CHECKED FOR SEVERE DISCONTINUITY ITERATIONS
ITERATION CONTROL PARAMETERS:

5.000E-03
1.000E-02
1.000E-02
2.000E-02
1.000E-05
1.000E-05
1.000E-03
1.000E-08
1.00
1.000E-05
1.000E-08
5.000E-03
1.000E-02
1.000E-02
2.000E-02
1.000E-05
1.000E-05
1.000E-03
1.000E-08
1.00
1.000E-05
1.000E-05
1.000E-05
1.000E-05
5.000E-03
0.100
1.00
1.000E-05
1.000E-05

FIRST EQUILIBRIUM ITERATION FOR CONSECUTIVE DIVERGENCE CHECK

EQUILIBRIUM ITERATION AFTER WHICH ALTERNATE RESIDUAL IS USED
MAXIMUM EQUILIBRIUM ITERATIONS ALLOWED
MAXIMUM ITERATIONS FOR SEVERE DISCONTINUITIES
GLOBAL STABILIZATION CONTROL IS NOT USED
PRINT OF INCREMENT NUMBER, TIME, ETC., EVERY
RESTART FILE WILL BE WRITTEN EVERY

4
9
16
12

1 INCREMENTS

20 INCREMENTS

THE MAXIMUM NUMBER OF INCREMENTS IN THIS STEP IS

LARGE DISPLACEMENT THEORY WILL BE USED

UNSYMMETRIC MATRIX STORAGE AND SOLUTION WILL BE USED
LINEAR EXTRAPOLATION WILL BE USED
CHARACTERISTIC ELEMENT LENGTH

0.750

DETAILS REGARDING ACTUAL SOLUTION WAVEFRONT REQUESTED

DETAILED OUTPUT OF DIAGNOSTICS TO DATABASE REQUESTED
PRINT OF INCREMENT NUMBER, TIME, ETC., TO THE MESSAGE FILE EVERY
REMENTS
THE STATUS FILE WILL MONITOR NODE
THE MESSAGE FILE WILL MONITOR NODE

401 DOF 2
401 DOF 2 EVERY

ELEMENT OPERATIONS WILL BE CARRIED OUT IN PARALLEL USING

1 INC

1 INCREMENTS
4 PROCESSORS

PARALLEL CONTACT TRACKING ENABLED

***WARNING: THERE ARE POINTS IN THE MODEL WHICHHAVE INITIAL STRESSES OUTSIDE
THE INITIALLY DEFINED YIELD SURFACE. THE VALUE DEFINING THE
CENTER OF THE YIELD SURFACE WILL BE ADJUSTED TO REMOVE THE
INCONSISTENCY.
THE FOLLOWING POINTS ARE OUTSIDE THE INITIALLY DEFINED YIELD SURFACE
ELEMENT
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
3
3

POINT
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
1
2

OLD CENTER
27.43
27.43
27.43
26.40
26.40
26.40
25.82
25.82
25.82
24.85
24.85
24.85
23.91
23.91
23.91
23.39
23.39

NEW CENTER
27.95
27.95
27.95
27.49
27.49
27.49
27.22
27.22
27.22
26.76
26.76
26.76
26.30
26.30
26.30
26.03
26.03

3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
7
8
8
8
8
8
8
8
8
8
9
9
9
9
9
9
9
9

3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8

23.39
22.51
22.51
22.51
21.67
21.67
21.67
21.20
21.20
21.20
20.41
20.41
20.41
19.65
19.65
19.65
19.22
19.22
19.22
18.51
18.51
18.51
17.83
17.83
17.83
17.44
17.44
17.44
16.80
16.80
16.80
16.19
16.19
16.19
15.84
15.84
15.84
15.26
15.26
15.26
14.71
14.71
14.71
14.40
14.40
14.40
13.88
13.88
13.88
13.38
13.38
13.38
13.10
13.10
13.10
12.63
12.63
12.63
12.18
12.18

26.03
25.57
25.57
25.57
25.11
25.11
25.11
24.84
24.84
24.84
24.38
24.38
24.38
23.92
23.92
23.92
23.65
23.65
23.65
23.19
23.19
23.19
22.73
22.73
22.73
22.46
22.46
22.46
22.00
22.00
22.00
21.54
21.54
21.54
21.28
21.28
21.28
20.81
20.81
20.81
20.35
20.35
20.35
20.09
20.09
20.09
19.62
19.62
19.62
19.16
19.16
19.16
18.90
18.90
18.90
18.44
18.44
18.44
17.97
17.97

9
10
10
10
10
10
10
10
10
10
11
11
11
11
11
11
11
11
11
12
12
12
12
12
12
12
12
12
13
13
13
13
13
13
13
13
13
14
14
14
14
14
14
14
14
14
15
15
15
15
15
15
15
15
15
16
16
16
16
16

9
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
1
2
3
4
5

12.18
11.92
11.92
11.92
11.50
11.50
11.50
11.10
11.10
11.10
10.87
10.87
10.87
10.49
10.49
10.49
10.13
10.13
10.13
9.921
9.921
9.921
9.580
9.580
9.580
9.253
9.253
9.253
9.068
9.068
9.068
8.763
8.763
8.763
8.469
8.469
8.469
8.304
8.304
8.304
8.030
8.030
8.030
7.768
7.768
7.768
7.621
7.621
7.621
7.376
7.376
7.376
7.142
7.142
7.142
7.011
7.011
7.011
6.794
6.794

17.97
17.71
17.71
17.71
17.25
17.25
17.25
16.79
16.79
16.79
16.52
16.52
16.52
16.06
16.06
16.06
15.60
15.60
15.60
15.33
15.33
15.33
14.87
14.87
14.87
14.41
14.41
14.41
14.14
14.14
14.14
13.68
13.68
13.68
13.22
13.22
13.22
12.95
12.95
12.95
12.49
12.49
12.49
12.03
12.03
12.03
11.76
11.76
11.76
11.30
11.30
11.30
10.84
10.84
10.84
10.57
10.57
10.57
10.11
10.11

16
16
16
16
17
17
17
17
17
17
17
17
17
18
18
18
18
18
18
18
18
18
19
19
19
19
19
19
19
19
19
20
20
20
20
20
20

6
7
8
9
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6

6.794
6.587
6.587
6.587
6.471
6.471
6.471
6.280
6.280
6.280
6.098
6.098
6.098
5.997
5.997
5.997
5.831
5.831
5.831
5.674
5.674
5.674
5.587
5.587
5.587
5.446
5.446
5.446
5.315
5.315
5.315
5.244
5.244
5.244
5.130
5.130
5.130

10.11
9.649
9.649
9.649
9.381
9.381
9.381
8.920
8.920
8.920
8.460
8.460
8.460
8.192
8.192
8.192
7.731
7.731
7.731
7.270
7.270
7.270
7.002
7.002
7.002
6.542
6.542
6.542
6.081
6.081
6.081
5.813
5.813
5.813
5.352
5.352
5.352

COLLECTING MODEL CONSTRAINT INFORMATION FOR OVERCONSTRAINT CHECKS

COLLECTING STEP CONSTRAINT INFORMATION FOR OVERCONSTRAINT CHECKS
ASYNCHRONOUS OUTPUT DATABASE FRAME FLUSH STARTED
INITIAL ELEMENT LOAD BALANCE
COMPUTE NODE 1 PROCESS
1
2
3
4
NUMBER OF EQUATIONS =

248

NUMBER OF ELEMENTS
5
5
5
5
NUMBER OF FLOATING PT. OPERATIONS = 1.33E+

05
USING THE DIRECT SOLVER WITH
CHECK POINT

4 PROCESSORS

START OF SOLVER

CHECK POINT END OF SOLVER

ELAPSED
ELAPSED
ELAPSED
ELAPSED

USER TIME (SEC)

SYSTEM TIME (SEC)
TOTAL CPU TIME (SEC)
WALLCLOCK TIME (SEC)

= 0.30000
= 0.0000
= 0.30000
=
0

CONVERGENCE CHECKS FOR EQUILIBRIUM ITERATION

AVERAGE
LARGEST
LARGEST
LARGEST

FORCE
7.35
TIME AVG. FORCE
RESIDUAL FORCE
0.158
AT NODE
22
INCREMENT OF DISP.
-1.325E-02 AT NODE
401
CORRECTION TO DISP.
-1.325E-02 AT NODE
401
FORCE
EQUILIBRIUM NOT ACHIEVED WITHIN TOLERANCE.

AVERAGE
LARGEST
LARGEST
LARGEST

VOL. FLUX
7.677E-12
RESIDUAL VOL. FLUX
3.299E-12
INCREMENT OF P.PRESS.
100.
CORRECTION TO P.PRESS.
100.
THERE IS ZERO VOL. FLUX EVERYWHERE

7.35
DOF 2
DOF 2
DOF 2

TIME AVG. VOL. FLUX 1.000E-02

AT NODE
1 DOF 8
AT NODE
1 DOF 8
AT NODE
1 DOF 8

***WARNING: THERE IS ZERO VOL. FLUX EVERYWHERE IN THE MODEL BASED ON THE
DEFAULT CRITERION. PLEASE CHECK THE VALUE OF THE AVERAGE VOL. FLUX
DURING THE CURRENT ITERATION TO VERIFY THAT THE VOL. FLUX IS SMALL
ENOUGH TO BE TREATED AS ZERO. IF NOT, PLEASE USE THE SOLUTION
CONTROLS TO RESET THE CRITERION FOR ZERO VOL. FLUX.
NUMBER OF EQUATIONS =

248

NUMBER OF FLOATING PT. OPERATIONS = 1.33E+

05
USING THE DIRECT SOLVER WITH
CHECK POINT

4 PROCESSORS

START OF SOLVER

CHECK POINT END OF SOLVER

ELAPSED
ELAPSED
ELAPSED
ELAPSED

USER TIME (SEC)

SYSTEM TIME (SEC)
TOTAL CPU TIME (SEC)
WALLCLOCK TIME (SEC)

= 0.10000
= 0.0000
= 0.10000
=
0

CONVERGENCE CHECKS FOR EQUILIBRIUM ITERATION

AVERAGE
LARGEST
LARGEST
LARGEST

FORCE
RESIDUAL FORCE
INCREMENT OF DISP.
CORRECTION TO DISP.
DISP.
CORRECTION TOO

AVERAGE
LARGEST
LARGEST
LARGEST

VOL. FLUX
2.234E-11
RESIDUAL VOL. FLUX
-1.054E-11
INCREMENT OF P.PRESS.
99.9
CORRECTION TO P.PRESS.
-0.132
THERE IS ZERO VOL. FLUX EVERYWHERE

7.42
TIME AVG. FORCE
7.42
-8.093E-03 AT NODE
362 DOF 2
-5.162E-02 AT NODE
401 DOF 2
-3.837E-02 AT NODE
401 DOF 2
LARGE COMPARED TO DISP.
INCREMENT
TIME AVG. VOL. FLUX 1.000E-02
AT NODE
381 DOF 8
AT NODE
1 DOF 8
AT NODE
3 DOF 8

***WARNING: THERE IS ZERO VOL. FLUX EVERYWHERE IN THE MODEL BASED ON THE
DEFAULT CRITERION. PLEASE CHECK THE VALUE OF THE AVERAGE VOL. FLUX

DURING THE CURRENT ITERATION TO VERIFY THAT THE VOL. FLUX IS SMALL
ENOUGH TO BE TREATED AS ZERO. IF NOT, PLEASE USE THE SOLUTION
CONTROLS TO RESET THE CRITERION FOR ZERO VOL. FLUX.
NUMBER OF EQUATIONS =

248

NUMBER OF FLOATING PT. OPERATIONS = 1.33E+

05
USING THE DIRECT SOLVER WITH
CHECK POINT

4 PROCESSORS

START OF SOLVER

CHECK POINT END OF SOLVER

ELAPSED
ELAPSED
ELAPSED
ELAPSED

USER TIME (SEC)

SYSTEM TIME (SEC)
TOTAL CPU TIME (SEC)
WALLCLOCK TIME (SEC)

= 0.10000
= 0.0000
= 0.10000
=
0

CONVERGENCE CHECKS FOR EQUILIBRIUM ITERATION

AVERAGE FORCE
LARGEST RESIDUAL FORCE
LARGEST INCREMENT OF DISP.
LARGEST CORRECTION TO DISP.
ESTIMATE OF DISP.
CORRECTION
FORCE
EQUILIB. ACCEPTED BASED
AVERAGE
LARGEST
LARGEST
LARGEST

7.42
TIME AVG. FORCE
7.42
-1.489E-04 AT NODE
162 DOF 2
-6.021E-02 AT NODE
401 DOF 2
-8.591E-03 AT NODE
403 DOF 2
-1.580E-04
ON SMALL RESIDUAL AND ESTIMATED CORRECTION

VOL. FLUX
5.004E-12
RESIDUAL VOL. FLUX
4.843E-12
INCREMENT OF P.PRESS.
99.5
CORRECTION TO P.PRESS.
-0.384
THERE IS ZERO VOL. FLUX EVERYWHERE

TIME AVG. VOL. FLUX 1.000E-02

AT NODE
3 DOF 8
AT NODE
1 DOF 8
AT NODE
1 DOF 8

***WARNING: THERE IS ZERO VOL. FLUX EVERYWHERE IN THE MODEL BASED ON THE
DEFAULT CRITERION. PLEASE CHECK THE VALUE OF THE AVERAGE VOL. FLUX
DURING THE CURRENT ITERATION TO VERIFY THAT THE VOL. FLUX IS SMALL
ENOUGH TO BE TREATED AS ZERO. IF NOT, PLEASE USE THE SOLUTION
CONTROLS TO RESET THE CRITERION FOR ZERO VOL. FLUX.
ITERATION SUMMARY FOR THE INCREMENT: 3 TOTAL ITERATIONS, OF WHICH
0 ARE SEVERE DISCONTINUITY ITERATIONS AND 3 ARE EQUILIBRIUM ITERATIONS.
CURRENT VALUE OF MONITOR NODE
TIME INCREMENT COMPLETED
STEP TIME COMPLETED

1.00
1.00

401 D.O.F. 2 IS -6.021E-02

, FRACTION OF STEP COMPLETED
, TOTAL TIME COMPLETED

RESTART INFORMATION WRITTEN IN STEP

1 AFTER INCREMENT

1.00
1.00
1

1
Abaqus 6.14-1

Date 31-Dec-2014

Time 13:48:

11
For use by Supplied By SSQ under license from Dassault Systemes or its subsid
iary.
1-d consolidation of a column of soil

STEP

INCREMENT

1
S T E P

STEP TIME
2

0.00
C O N S O L I D A T I O N

A N A L

Y S I S

FIXED TIME INCREMENTS

TIME INCREMENT IS
TIME PERIOD IS

50.0
500.

CREEP, SWELLING, AND VISCOELASTIC EFFECTS ARE OMITTED IN THIS STEP

THE ANALYSIS WILL TERMINATE AT THE FINAL TIME SPECIFIED
CONVERGENCE TOLERANCE PARAMETERS FOR FORCE
CRITERION FOR RESIDUAL FORCE
FOR A NONLINEAR PROBLEM
5.000E-03
CRITERION FOR DISP.
CORRECTION IN A NONLINEAR PROBLEM
1.000E-02
INIT. VALUE OF TIME AVG. FORCE
IS TIME AVG. FORCE
IN PREVIOUS STEP
AVERAGE FORCE
IS TIME AVERAGE FORCE
ALTERNATE CRIT. FOR RESIDUAL FORCE
FOR A NONLINEAR PROBLEM
2.000E-02
CRITERION FOR ZERO FORCE
RELATIVE TO TIME AVRG. FORCE
1.000E-05
CRITERION FOR RESIDUAL FORCE
WHEN THERE IS ZERO FLUX
1.000E-05
CRITERION FOR DISP.
CORRECTION WHEN THERE IS ZERO FLUX
1.000E-03
CRITERION FOR RESIDUAL FORCE
FOR A LINEAR INCREMENT
1.000E-08
FIELD CONVERSION RATIO
1.00
CRITERION FOR ZERO FORCE
REL. TO TIME AVRG. MAX. FORCE
1.000E-05
CRITERION FOR ZERO DISP.
RELATIVE TO CHARACTERISTIC LENGTH
1.000E-08
CONVERGENCE TOLERANCE PARAMETERS FOR VOL. FLUX
CRITERION FOR RESIDUAL VOL. FLUX FOR A NONLINEAR PROBLEM
5.000E-03
CRITERION FOR P.PRESS. CORRECTION IN A NONLINEAR PROBLEM
1.000E-02
INIT. VALUE OF TIME AVG. VOL. FLUX IS TIME AVG. VOL. FLUX IN PREVIOUS STEP
AVERAGE VOL. FLUX IS TIME AVERAGE VOL. FLUX
ALTERNATE CRIT. FOR RESIDUAL VOL. FLUX FOR A NONLINEAR PROBLEM
2.000E-02
CRITERION FOR ZERO VOL. FLUX RELATIVE TO TIME AVRG. VOL. FLUX
1.000E-05
CRITERION FOR RESIDUAL VOL. FLUX WHEN THERE IS ZERO FLUX
1.000E-05
CRITERION FOR P.PRESS. CORRECTION WHEN THERE IS ZERO FLUX
1.000E-03
CRITERION FOR RESIDUAL VOL. FLUX FOR A LINEAR INCREMENT
1.000E-08
FIELD CONVERSION RATIO
1.00
CRITERION FOR ZERO VOL. FLUX REL. TO TIME AVRG. MAX. VOL. FLUX
1.000E-05
VOLUMETRIC STRAIN COMPATIBILITY TOLERANCE FOR HYBRID SOLIDS
AXIAL STRAIN COMPATIBILITY TOLERANCE FOR HYBRID BEAMS
TRANS. SHEAR STRAIN COMPATIBILITY TOLERANCE FOR HYBRID BEAMS
SOFT CONTACT CONSTRAINT COMPATIBILITY TOLERANCE FOR P>P0
SOFT CONTACT CONSTRAINT COMPATIBILITY TOLERANCE FOR P=0.0
CONTACT FORCE ERROR TOLERANCE FOR CONVERT SDI=YES
DISPLACEMENT COMPATIBILITY TOLERANCE FOR DCOUP ELEMENTS
ROTATION COMPATIBILITY TOLERANCE FOR DCOUP ELEMENTS
EQUILIBRIUM WILL BE CHECKED FOR SEVERE DISCONTINUITY ITERATIONS
ITERATION CONTROL PARAMETERS:

1.000E-05
1.000E-05
1.000E-05
5.000E-03
0.100
1.00
1.000E-05
1.000E-05

FIRST EQUILIBRIUM ITERATION FOR CONSECUTIVE DIVERGENCE CHECK

EQUILIBRIUM ITERATION AFTER WHICH ALTERNATE RESIDUAL IS USED
MAXIMUM EQUILIBRIUM ITERATIONS ALLOWED
MAXIMUM ITERATIONS FOR SEVERE DISCONTINUITIES
GLOBAL STABILIZATION CONTROL IS NOT USED
PRINT OF INCREMENT NUMBER, TIME, ETC., EVERY
RESTART FILE WILL BE WRITTEN EVERY

4
9
16
12

1 INCREMENTS

20 INCREMENTS

THE MAXIMUM NUMBER OF INCREMENTS IN THIS STEP IS

100

LARGE DISPLACEMENT THEORY WILL BE USED

UNSYMMETRIC MATRIX STORAGE AND SOLUTION WILL BE USED
LINEAR EXTRAPOLATION WILL BE USED
CHARACTERISTIC ELEMENT LENGTH

0.750

DETAILS REGARDING ACTUAL SOLUTION WAVEFRONT REQUESTED

DETAILED OUTPUT OF DIAGNOSTICS TO DATABASE REQUESTED
PRINT OF INCREMENT NUMBER, TIME, ETC., TO THE MESSAGE FILE EVERY
REMENTS
THE STATUS FILE WILL MONITOR NODE
THE MESSAGE FILE WILL MONITOR NODE

401 DOF 2
401 DOF 2 EVERY

ELEMENT OPERATIONS WILL BE CARRIED OUT IN PARALLEL USING

1 INC

1 INCREMENTS
4 PROCESSORS

COLLECTING STEP CONSTRAINT INFORMATION FOR OVERCONSTRAINT CHECKS

ASYNCHRONOUS OUTPUT DATABASE FRAME FLUSH STARTED

INCREMENT

1 STARTS. ATTEMPT NUMBER 1, TIME INCREMENT

INITIAL ELEMENT LOAD BALANCE

COMPUTE NODE 1 PROCESS
1
2
3
4
NUMBER OF EQUATIONS =

248

NUMBER OF ELEMENTS
5
5
5
5
NUMBER OF FLOATING PT. OPERATIONS = 1.33E+

05
USING THE DIRECT SOLVER WITH
CHECK POINT

4 PROCESSORS

START OF SOLVER

CHECK POINT END OF SOLVER

ELAPSED
ELAPSED
ELAPSED
ELAPSED

50.0

USER TIME (SEC)

SYSTEM TIME (SEC)
TOTAL CPU TIME (SEC)
WALLCLOCK TIME (SEC)

= 0.20000
= 0.0000
= 0.20000
=
0

CONVERGENCE CHECKS FOR EQUILIBRIUM ITERATION

AVERAGE
LARGEST
LARGEST
LARGEST

FORCE
12.8
TIME AVG. FORCE
RESIDUAL FORCE
2.79
AT NODE
393
INCREMENT OF DISP.
-3.574E-03 AT NODE
403
CORRECTION TO DISP.
-3.574E-03 AT NODE
403
FORCE
EQUILIBRIUM NOT ACHIEVED WITHIN TOLERANCE.

AVERAGE
LARGEST
LARGEST
LARGEST

VOL. FLUX
7.281E-05 TIME AVG. VOL. FLUX 7.281E-05
RESIDUAL VOL. FLUX
9.511E-09 AT NODE
381 DOF 8
INCREMENT OF P.PRESS.
13.0
AT NODE
381 DOF 8
CORRECTION TO P.PRESS.
13.0
AT NODE
381 DOF 8
P.PRESS. CORRECTION TOO LARGE COMPARED TO P.PRESS. INCREMENT

NUMBER OF EQUATIONS =

248

12.8
DOF 2
DOF 2
DOF 2

NUMBER OF FLOATING PT. OPERATIONS = 1.33E+

05
USING THE DIRECT SOLVER WITH
CHECK POINT

4 PROCESSORS

START OF SOLVER

CHECK POINT END OF SOLVER

ELAPSED
ELAPSED
ELAPSED
ELAPSED

USER TIME (SEC)

SYSTEM TIME (SEC)
TOTAL CPU TIME (SEC)
WALLCLOCK TIME (SEC)

=
=
=
=

0.0000
0.0000
0.0000
0

CONVERGENCE CHECKS FOR EQUILIBRIUM ITERATION

AVERAGE
LARGEST
LARGEST
LARGEST

FORCE
12.8
TIME AVG. FORCE
RESIDUAL FORCE
0.369
AT NODE
402
INCREMENT OF DISP.
-1.326E-02 AT NODE
403
CORRECTION TO DISP.
-9.685E-03 AT NODE
401
FORCE
EQUILIBRIUM NOT ACHIEVED WITHIN TOLERANCE.

AVERAGE
LARGEST
LARGEST
LARGEST

VOL. FLUX
2.623E-04 TIME AVG. VOL. FLUX 2.623E-04
RESIDUAL VOL. FLUX
3.234E-08 AT NODE
383 DOF 8
INCREMENT OF P.PRESS.
17.7
AT NODE
383 DOF 8
CORRECTION TO P.PRESS.
4.77
AT NODE
383 DOF 8
P.PRESS. CORRECTION TOO LARGE COMPARED TO P.PRESS. INCREMENT

NUMBER OF EQUATIONS =

248

NUMBER OF FLOATING PT. OPERATIONS = 1.33E+

05
USING THE DIRECT SOLVER WITH
CHECK POINT

4 PROCESSORS

START OF SOLVER

CHECK POINT END OF SOLVER

ELAPSED
ELAPSED
ELAPSED
ELAPSED

12.8
DOF 2
DOF 2
DOF 2

USER TIME (SEC)

SYSTEM TIME (SEC)
TOTAL CPU TIME (SEC)
WALLCLOCK TIME (SEC)

= 0.10000
= 0.0000
= 0.10000
=
0

CONVERGENCE CHECKS FOR EQUILIBRIUM ITERATION

AVERAGE FORCE
LARGEST RESIDUAL FORCE
LARGEST INCREMENT OF DISP.
LARGEST CORRECTION TO DISP.
ESTIMATE OF DISP.
CORRECTION
FORCE
EQUILIB. ACCEPTED BASED
AVERAGE
LARGEST
LARGEST
LARGEST

12.8
TIME AVG. FORCE
12.8
1.423E-03 AT NODE
402 DOF 2
-1.270E-02 AT NODE
403 DOF 2
5.542E-04 AT NODE
402 DOF 2
2.140E-06
ON SMALL RESIDUAL AND ESTIMATED CORRECTION

VOL. FLUX
2.498E-04 TIME AVG. VOL. FLUX 2.498E-04
RESIDUAL VOL. FLUX
-1.893E-09 AT NODE
383 DOF 8
INCREMENT OF P.PRESS.
16.8
AT NODE
381 DOF 8
CORRECTION TO P.PRESS.
-0.886
AT NODE
383 DOF 8
P.PRESS. CORRECTION TOO LARGE COMPARED TO P.PRESS. INCREMENT

NUMBER OF EQUATIONS =

248

NUMBER OF FLOATING PT. OPERATIONS = 1.33E+

05
USING THE DIRECT SOLVER WITH
CHECK POINT

4 PROCESSORS

START OF SOLVER

CHECK POINT END OF SOLVER

ELAPSED
ELAPSED
ELAPSED
ELAPSED

USER TIME (SEC)

SYSTEM TIME (SEC)
TOTAL CPU TIME (SEC)
WALLCLOCK TIME (SEC)

=
=
=
=

0.0000
0.0000
0.0000
0

CONVERGENCE CHECKS FOR EQUILIBRIUM ITERATION

AVERAGE
LARGEST
LARGEST
LARGEST

FORCE
12.8
TIME AVG. FORCE
RESIDUAL FORCE
-2.063E-06 AT NODE
391
INCREMENT OF DISP.
-1.270E-02 AT NODE
401
CORRECTION TO DISP.
4.124E-06 AT NODE
403
THE FORCE
EQUILIBRIUM EQUATIONS HAVE CONVERGED

AVERAGE
LARGEST
LARGEST
LARGEST

VOL. FLUX
2.497E-04 TIME AVG. VOL.
RESIDUAL VOL. FLUX
-1.368E-11 AT NODE
INCREMENT OF P.PRESS.
16.8
AT NODE
CORRECTION TO P.PRESS.
-2.955E-03 AT NODE
THE VOL. FLUX EQUILIBRIUM EQUATIONS HAVE CONVERGED

12.8
DOF 2
DOF 2
DOF 2

FLUX 2.497E-04
383 DOF 8
381 DOF 8
383 DOF 8

ITERATION SUMMARY FOR THE INCREMENT: 4 TOTAL ITERATIONS, OF WHICH

0 ARE SEVERE DISCONTINUITY ITERATIONS AND 4 ARE EQUILIBRIUM ITERATIONS.
CURRENT VALUE OF MONITOR NODE
TIME INCREMENT COMPLETED
STEP TIME COMPLETED

50.0
50.0

401 D.O.F. 2 IS -7.291E-02

, FRACTION OF STEP COMPLETED 0.100
, TOTAL TIME COMPLETED
51.0

ASYNCHRONOUS OUTPUT DATABASE FRAME FLUSH STARTED

INCREMENT

2 STARTS. ATTEMPT NUMBER 1, TIME INCREMENT

NUMBER OF EQUATIONS =
05

248

50.0

NUMBER OF FLOATING PT. OPERATIONS = 1.33E+

USING THE DIRECT SOLVER WITH

CHECK POINT

4 PROCESSORS

START OF SOLVER

CHECK POINT END OF SOLVER

ELAPSED
ELAPSED
ELAPSED
ELAPSED

USER TIME (SEC)

SYSTEM TIME (SEC)
TOTAL CPU TIME (SEC)
WALLCLOCK TIME (SEC)

= 0.30000
= 0.0000
= 0.30000
=
0

CONVERGENCE CHECKS FOR EQUILIBRIUM ITERATION

AVERAGE FORCE
LARGEST RESIDUAL FORCE
LARGEST INCREMENT OF DISP.
LARGEST CORRECTION TO DISP.
ESTIMATE OF DISP.
CORRECTION
FORCE
EQUILIB. ACCEPTED BASED

14.1
TIME AVG. FORCE
13.4
5.269E-02 AT NODE
391 DOF 2
-1.037E-02 AT NODE
403 DOF 2
2.327E-03 AT NODE
401 DOF 2
9.548E-05
ON SMALL RESIDUAL AND ESTIMATED CORRECTION

AVERAGE VOL. FLUX

LARGEST RESIDUAL VOL. FLUX
LARGEST INCREMENT OF P.PRESS.
LARGEST CORRECTION TO P.PRESS.
ESTIMATE OF P.PRESS. CORRECTION
VOL. FLUX EQUILIB. ACCEPTED BASED

4.895E-04 TIME AVG. VOL. FLUX 3.696E-04

-1.410E-08 AT NODE
383 DOF 8
14.4
AT NODE
383 DOF 8
-2.44
AT NODE
381 DOF 8
2.232E-02
ON SMALL RESIDUAL AND ESTIMATED CORRECTION

ITERATION SUMMARY FOR THE INCREMENT: 1 TOTAL ITERATIONS, OF WHICH

0 ARE SEVERE DISCONTINUITY ITERATIONS AND 1 ARE EQUILIBRIUM ITERATIONS.
CURRENT VALUE OF MONITOR NODE
TIME INCREMENT COMPLETED
STEP TIME COMPLETED

401 D.O.F. 2 IS -8.329E-02

50.0
100.

, FRACTION OF STEP COMPLETED 0.200

, TOTAL TIME COMPLETED
101.

ASYNCHRONOUS OUTPUT DATABASE FRAME FLUSH STARTED

INCREMENT

3 STARTS. ATTEMPT NUMBER 1, TIME INCREMENT

NUMBER OF EQUATIONS =

248

50.0

NUMBER OF FLOATING PT. OPERATIONS = 1.33E+

05
USING THE DIRECT SOLVER WITH
CHECK POINT

4 PROCESSORS

START OF SOLVER

CHECK POINT END OF SOLVER

ELAPSED
ELAPSED
ELAPSED
ELAPSED

USER TIME (SEC)

SYSTEM TIME (SEC)
TOTAL CPU TIME (SEC)
WALLCLOCK TIME (SEC)

= 0.10000
= 0.0000
= 0.10000
=
0

CONVERGENCE CHECKS FOR EQUILIBRIUM ITERATION

AVERAGE
LARGEST
LARGEST
LARGEST

FORCE
15.5
TIME AVG. FORCE
14.1
RESIDUAL FORCE
6.109E-02 AT NODE
391 DOF 2
INCREMENT OF DISP.
-8.267E-03 AT NODE
403 DOF 2
CORRECTION TO DISP.
2.106E-03 AT NODE
403 DOF 2
DISP.
CORRECTION TOO LARGE COMPARED TO DISP.
INCREMENT

AVERAGE VOL. FLUX

LARGEST RESIDUAL VOL. FLUX
LARGEST INCREMENT OF P.PRESS.
LARGEST CORRECTION TO P.PRESS.
ESTIMATE OF P.PRESS. CORRECTION
VOL. FLUX EQUILIB. ACCEPTED BASED
NUMBER OF EQUATIONS =

4.203E-04 TIME AVG. VOL. FLUX 3.865E-04

-1.895E-08 AT NODE
383 DOF 8
13.1
AT NODE
381 DOF 8
-1.28
AT NODE
383 DOF 8
1.916E-02
ON SMALL RESIDUAL AND ESTIMATED CORRECTION

248

NUMBER OF FLOATING PT. OPERATIONS = 1.33E+

05
USING THE DIRECT SOLVER WITH
CHECK POINT

4 PROCESSORS

START OF SOLVER

CHECK POINT END OF SOLVER

ELAPSED
ELAPSED
ELAPSED
ELAPSED

USER TIME (SEC)

SYSTEM TIME (SEC)
TOTAL CPU TIME (SEC)
WALLCLOCK TIME (SEC)

=
=
=
=

0.0000
0.0000
0.0000
0

CONVERGENCE CHECKS FOR EQUILIBRIUM ITERATION

AVERAGE
LARGEST
LARGEST
LARGEST

FORCE
15.5
TIME AVG. FORCE
RESIDUAL FORCE
6.275E-05 AT NODE
391
INCREMENT OF DISP.
-8.314E-03 AT NODE
403
CORRECTION TO DISP.
-4.655E-05 AT NODE
401
THE FORCE
EQUILIBRIUM EQUATIONS HAVE CONVERGED

AVERAGE
LARGEST
LARGEST
LARGEST

VOL. FLUX
4.762E-04 TIME AVG. VOL.
RESIDUAL VOL. FLUX
3.539E-10 AT NODE
INCREMENT OF P.PRESS.
13.1
AT NODE
CORRECTION TO P.PRESS.
-2.403E-02 AT NODE
THE VOL. FLUX EQUILIBRIUM EQUATIONS HAVE CONVERGED

14.1
DOF 2
DOF 2
DOF 2

FLUX 4.052E-04
381 DOF 8
383 DOF 8
381 DOF 8

ITERATION SUMMARY FOR THE INCREMENT: 2 TOTAL ITERATIONS, OF WHICH

0 ARE SEVERE DISCONTINUITY ITERATIONS AND 2 ARE EQUILIBRIUM ITERATIONS.
CURRENT VALUE OF MONITOR NODE
TIME INCREMENT COMPLETED
STEP TIME COMPLETED

50.0
150.

401 D.O.F. 2 IS -9.160E-02

, FRACTION OF STEP COMPLETED 0.300
, TOTAL TIME COMPLETED
151.

ASYNCHRONOUS OUTPUT DATABASE FRAME FLUSH STARTED

INCREMENT

4 STARTS. ATTEMPT NUMBER 1, TIME INCREMENT

NUMBER OF EQUATIONS =

248

NUMBER OF FLOATING PT. OPERATIONS = 1.33E+

05
USING THE DIRECT SOLVER WITH

50.0

4 PROCESSORS

CHECK POINT

START OF SOLVER

CHECK POINT END OF SOLVER

ELAPSED
ELAPSED
ELAPSED
ELAPSED

USER TIME (SEC)

SYSTEM TIME (SEC)
TOTAL CPU TIME (SEC)
WALLCLOCK TIME (SEC)

= 0.40000
= 0.0000
= 0.40000
=
0

CONVERGENCE CHECKS FOR EQUILIBRIUM ITERATION

AVERAGE FORCE
LARGEST RESIDUAL FORCE
LARGEST INCREMENT OF DISP.
LARGEST CORRECTION TO DISP.
ESTIMATE OF DISP.
CORRECTION
FORCE
EQUILIB. ACCEPTED BASED

16.8
TIME AVG. FORCE
14.8
6.187E-02 AT NODE
391 DOF 2
-6.816E-03 AT NODE
403 DOF 2
1.498E-03 AT NODE
402 DOF 2
-6.445E-05
ON SMALL RESIDUAL AND ESTIMATED CORRECTION

AVERAGE VOL. FLUX

LARGEST RESIDUAL VOL. FLUX
LARGEST INCREMENT OF P.PRESS.
LARGEST CORRECTION TO P.PRESS.
ESTIMATE OF P.PRESS. CORRECTION
VOL. FLUX EQUILIB. ACCEPTED BASED

3.874E-04 TIME AVG. VOL. FLUX 4.007E-04

-1.763E-08 AT NODE
383 DOF 8
12.4
AT NODE
383 DOF 8
-0.722
AT NODE
381 DOF 8
1.110E-02
ON SMALL RESIDUAL AND ESTIMATED CORRECTION

ITERATION SUMMARY FOR THE INCREMENT: 1 TOTAL ITERATIONS, OF WHICH

0 ARE SEVERE DISCONTINUITY ITERATIONS AND 1 ARE EQUILIBRIUM ITERATIONS.
CURRENT VALUE OF MONITOR NODE
TIME INCREMENT COMPLETED
STEP TIME COMPLETED

401 D.O.F. 2 IS -9.842E-02

50.0
200.

, FRACTION OF STEP COMPLETED 0.400

, TOTAL TIME COMPLETED
201.

ASYNCHRONOUS OUTPUT DATABASE FRAME FLUSH STARTED

INCREMENT

5 STARTS. ATTEMPT NUMBER 1, TIME INCREMENT

NUMBER OF EQUATIONS =

248

50.0

NUMBER OF FLOATING PT. OPERATIONS = 1.33E+

05
USING THE DIRECT SOLVER WITH
CHECK POINT

4 PROCESSORS

START OF SOLVER

CHECK POINT END OF SOLVER

ELAPSED
ELAPSED
ELAPSED
ELAPSED

USER TIME (SEC)

SYSTEM TIME (SEC)
TOTAL CPU TIME (SEC)
WALLCLOCK TIME (SEC)

= 0.10000
= 0.0000
= 0.10000
=
0

CONVERGENCE CHECKS FOR EQUILIBRIUM ITERATION

AVERAGE FORCE
LARGEST RESIDUAL FORCE

18.2
5.251E-02

TIME AVG. FORCE

AT NODE
391

15.5
DOF 2

LARGEST INCREMENT OF DISP.

LARGEST CORRECTION TO DISP.
ESTIMATE OF DISP.
CORRECTION
FORCE
EQUILIB. ACCEPTED BASED

-6.032E-03 AT NODE
402 DOF 2
7.832E-04 AT NODE
403 DOF 2
-4.128E-05
ON SMALL RESIDUAL AND ESTIMATED CORRECTION

AVERAGE VOL. FLUX

LARGEST RESIDUAL VOL. FLUX
LARGEST INCREMENT OF P.PRESS.
LARGEST CORRECTION TO P.PRESS.
ESTIMATE OF P.PRESS. CORRECTION
VOL. FLUX EQUILIB. ACCEPTED BASED

4.317E-04 TIME AVG. VOL. FLUX 4.069E-04

-1.054E-08 AT NODE
381 DOF 8
11.5
AT NODE
381 DOF 8
-0.853
AT NODE
383 DOF 8
8.448E-03
ON SMALL RESIDUAL AND ESTIMATED CORRECTION

ITERATION SUMMARY FOR THE INCREMENT: 1 TOTAL ITERATIONS, OF WHICH

0 ARE SEVERE DISCONTINUITY ITERATIONS AND 1 ARE EQUILIBRIUM ITERATIONS.
CURRENT VALUE OF MONITOR NODE
TIME INCREMENT COMPLETED
STEP TIME COMPLETED

401 D.O.F. 2 IS -0.104

50.0
250.

, FRACTION OF STEP COMPLETED 0.500

, TOTAL TIME COMPLETED
251.

ASYNCHRONOUS OUTPUT DATABASE FRAME FLUSH STARTED

INCREMENT

6 STARTS. ATTEMPT NUMBER 1, TIME INCREMENT

NUMBER OF EQUATIONS =

248

50.0

NUMBER OF FLOATING PT. OPERATIONS = 1.33E+

05
USING THE DIRECT SOLVER WITH
CHECK POINT

4 PROCESSORS

START OF SOLVER

CHECK POINT END OF SOLVER

ELAPSED
ELAPSED
ELAPSED
ELAPSED

USER TIME (SEC)

SYSTEM TIME (SEC)
TOTAL CPU TIME (SEC)
WALLCLOCK TIME (SEC)

= 0.10000
= 0.0000
= 0.10000
=
0

CONVERGENCE CHECKS FOR EQUILIBRIUM ITERATION

AVERAGE
LARGEST
LARGEST
LARGEST

FORCE
19.5
TIME AVG. FORCE
RESIDUAL FORCE
-3.36
AT NODE
373
INCREMENT OF DISP.
-5.451E-03 AT NODE
401
CORRECTION TO DISP.
5.812E-04 AT NODE
403
FORCE
EQUILIBRIUM NOT ACHIEVED WITHIN TOLERANCE.

AVERAGE VOL. FLUX

LARGEST RESIDUAL VOL. FLUX
LARGEST INCREMENT OF P.PRESS.
LARGEST CORRECTION TO P.PRESS.
ESTIMATE OF P.PRESS. CORRECTION
VOL. FLUX EQUILIB. ACCEPTED BASED
NUMBER OF EQUATIONS =

248

4.230E-04 TIME AVG. VOL. FLUX 4.096E-04

-9.881E-09 AT NODE
381 DOF 8
10.6
AT NODE
381 DOF 8
-0.893
AT NODE
381 DOF 8
8.885E-03
ON SMALL RESIDUAL AND ESTIMATED CORRECTION
NUMBER OF FLOATING PT. OPERATIONS = 1.33E+

05
USING THE DIRECT SOLVER WITH

16.2
DOF 2
DOF 2
DOF 2

4 PROCESSORS

CHECK POINT

START OF SOLVER

CHECK POINT END OF SOLVER

ELAPSED
ELAPSED
ELAPSED
ELAPSED

USER TIME (SEC)

SYSTEM TIME (SEC)
TOTAL CPU TIME (SEC)
WALLCLOCK TIME (SEC)

=
=
=
=

0.0000
0.0000
0.0000
0

CONVERGENCE CHECKS FOR EQUILIBRIUM ITERATION

AVERAGE
LARGEST
LARGEST
LARGEST

FORCE
19.5
TIME AVG. FORCE
RESIDUAL FORCE
2.82
AT NODE
373
INCREMENT OF DISP.
-7.340E-03 AT NODE
401
CORRECTION TO DISP.
3.671E-03 AT NODE
382
FORCE
EQUILIBRIUM NOT ACHIEVED WITHIN TOLERANCE.

AVERAGE
LARGEST
LARGEST
LARGEST

VOL. FLUX
7.034E-04 TIME AVG. VOL. FLUX 4.563E-04
RESIDUAL VOL. FLUX
5.978E-08 AT NODE
381 DOF 8
INCREMENT OF P.PRESS.
10.9
AT NODE
363 DOF 8
CORRECTION TO P.PRESS.
-5.12
AT NODE
383 DOF 8
P.PRESS. CORRECTION TOO LARGE COMPARED TO P.PRESS. INCREMENT

NUMBER OF EQUATIONS =

248

16.2
DOF 2
DOF 2
DOF 2

NUMBER OF FLOATING PT. OPERATIONS = 1.33E+

05
USING THE DIRECT SOLVER WITH
CHECK POINT

4 PROCESSORS

START OF SOLVER

CHECK POINT END OF SOLVER

ELAPSED
ELAPSED
ELAPSED
ELAPSED

USER TIME (SEC)

SYSTEM TIME (SEC)
TOTAL CPU TIME (SEC)
WALLCLOCK TIME (SEC)

= 0.60000
= 0.0000
= 0.60000
=
0

CONVERGENCE CHECKS FOR EQUILIBRIUM ITERATION

AVERAGE
LARGEST
LARGEST
LARGEST

FORCE
19.5
TIME AVG. FORCE
RESIDUAL FORCE
-3.07
AT NODE
391
INCREMENT OF DISP.
-4.500E-03 AT NODE
402
CORRECTION TO DISP.
-7.881E-03 AT NODE
382
FORCE
EQUILIBRIUM NOT ACHIEVED WITHIN TOLERANCE.

AVERAGE
LARGEST
LARGEST
LARGEST

VOL. FLUX
2.396E-04 TIME AVG. VOL. FLUX 3.790E-04
RESIDUAL VOL. FLUX
-1.043E-07 AT NODE
381 DOF 8
INCREMENT OF P.PRESS.
10.4
AT NODE
361 DOF 8
CORRECTION TO P.PRESS.
4.28
AT NODE
383 DOF 8
P.PRESS. CORRECTION TOO LARGE COMPARED TO P.PRESS. INCREMENT

NUMBER OF EQUATIONS =

248

NUMBER OF FLOATING PT. OPERATIONS = 1.33E+

05
USING THE DIRECT SOLVER WITH
CHECK POINT

16.2
DOF 2
DOF 2
DOF 2

4 PROCESSORS

START OF SOLVER

CHECK POINT END OF SOLVER

ELAPSED
ELAPSED
ELAPSED
ELAPSED

USER TIME (SEC)

SYSTEM TIME (SEC)
TOTAL CPU TIME (SEC)
WALLCLOCK TIME (SEC)

=
=
=
=

0.0000
0.0000
0.0000
1

CONVERGENCE CHECKS FOR EQUILIBRIUM ITERATION

AVERAGE
LARGEST
LARGEST
LARGEST

FORCE
19.5
TIME AVG. FORCE
RESIDUAL FORCE
-1.44
AT NODE
373
INCREMENT OF DISP.
-4.997E-03 AT NODE
403
CORRECTION TO DISP.
3.499E-03 AT NODE
383
FORCE
EQUILIBRIUM NOT ACHIEVED WITHIN TOLERANCE.

AVERAGE
LARGEST
LARGEST
LARGEST

VOL. FLUX
3.440E-04 TIME AVG. VOL. FLUX 3.964E-04
RESIDUAL VOL. FLUX
2.721E-08 AT NODE
383 DOF 8
INCREMENT OF P.PRESS.
12.4
AT NODE
381 DOF 8
CORRECTION TO P.PRESS.
-2.69
AT NODE
361 DOF 8
P.PRESS. CORRECTION TOO LARGE COMPARED TO P.PRESS. INCREMENT

NUMBER OF EQUATIONS =

248

16.2
DOF 2
DOF 2
DOF 2

NUMBER OF FLOATING PT. OPERATIONS = 1.33E+

05
USING THE DIRECT SOLVER WITH
CHECK POINT

4 PROCESSORS

START OF SOLVER

CHECK POINT END OF SOLVER

ELAPSED
ELAPSED
ELAPSED
ELAPSED

USER TIME (SEC)

SYSTEM TIME (SEC)
TOTAL CPU TIME (SEC)
WALLCLOCK TIME (SEC)

= 0.10000
= 0.0000
= 0.10000
=
0

CONVERGENCE CHECKS FOR EQUILIBRIUM ITERATION

AVERAGE
LARGEST
LARGEST
LARGEST

FORCE
19.5
TIME AVG. FORCE
RESIDUAL FORCE
-3.36
AT NODE
371
INCREMENT OF DISP.
-5.471E-03 AT NODE
403
CORRECTION TO DISP.
7.177E-04 AT NODE
381
FORCE
EQUILIBRIUM NOT ACHIEVED WITHIN TOLERANCE.

16.2
DOF 2
DOF 2
DOF 2

AVERAGE
LARGEST
LARGEST
LARGEST

VOL. FLUX
4.891E-04 TIME AVG. VOL. FLUX 4.206E-04
RESIDUAL VOL. FLUX
1.431E-08 AT NODE
383 DOF 8
INCREMENT OF P.PRESS.
10.6
AT NODE
381 DOF 8
CORRECTION TO P.PRESS.
2.04
AT NODE
363 DOF 8
P.PRESS. CORRECTION TOO LARGE COMPARED TO P.PRESS. INCREMENT

***NOTE: THE SOLUTION APPEARS TO BE DIVERGING. CONVERGENCE IS JUDGED UNLIKELY.

***ERROR: FIXED TIME INCREMENT IS TOO LARGE
***ERROR: THE ANALYSIS HAS BEEN TERMINATED DUE TO PREVIOUS ERRORS. ALL OUTPUT
REQUESTS HAVE BEEN WRITTEN FOR THE LAST CONVERGED INCREMENT.

ANALYSIS SUMMARY:
TOTAL OF
7
1
17
17
17
0
1
0
0
0
4
0
0
2

INCREMENTS
CUTBACKS IN AUTOMATIC INCREMENTATION
ITERATIONS INCLUDING CONTACT ITERATIONS IF PRESENT
PASSES THROUGH THE EQUATION SOLVER OF WHICH
INVOLVE MATRIX DECOMPOSITION, INCLUDING
DECOMPOSITION(S) OF THE MASS MATRIX
REORDERING OF EQUATIONS TO MINIMIZE WAVEFRONT
ADDITIONAL RESIDUAL EVALUATIONS FOR LINE SEARCHES
ADDITIONAL OPERATOR EVALUATIONS FOR LINE SEARCHES
WARNING MESSAGES DURING USER INPUT PROCESSING
WARNING MESSAGES DURING ANALYSIS
ANALYSIS WARNINGS ARE NUMERICAL PROBLEM MESSAGES
ANALYSIS WARNINGS ARE NEGATIVE EIGENVALUE MESSAGES
ERROR MESSAGES

JOB TIME SUMMARY

USER TIME (SEC)
SYSTEM TIME (SEC)
TOTAL CPU TIME (SEC)
WALLCLOCK TIME (SEC)

= 2.8000
= 0.60000
= 3.4000
=
3