CSWP Sample Exam

Certified SolidWorks Professional: Solid Modeling Specialist (CSWP-CORE)

These questions are an example of what to expect in Segment 1 of the CSWP-CORE exam.
How to take this sample exam:
1. To best simulate the conditions of the real test, it is best NOT to print this exam. Since
the Virtual Tester client window runs concurrently with SolidWorks you must switch
back and forth between the two applications. Keeping this document open and consulting
it on your computer while running SolidWorks is the best method to simulate the real test
conditions.
2. The multiple choice answers should serve as a check for you to ensure that your model is
on the right track while completing this exam. If you do not find your answer in the
selections offered then most likely there is something wrong with your model at that
point.
3. Answers to the questions are on the last pages of this sample test document. There are
also hints that can help save time during the exam.
4. If you can complete this exam and get at least 4 out of the 5 questions correctly in 30
minutes or less then you should be ready to take the real CSWP - Segment 1 exam.
What you will need for the real CSWP exam:
1. A computer that is running SolidWorks 2008 sp3.1 or higher.
2. The computer must have a connection to the Internet.
3. A double-monitor is recommended but not necessary.
4. If you will be running the Virtual Tester client on a separate computer from the one that
is running SolidWorks, make sure there is a way to transfer files from one computer to
the other. You will be required to download SolidWorks files during the real test to be
able to correctly answer some of the questions.

1. Initial part Stage 1: Build this part in SolidWorks.

Unit system: MMGS (millimeter, gram, second)
Decimal places: 2
Part origin: Arbitrary
Material: 6061 Alloy
Density = 0.0027 kg/cm^3
All holes through all unless shown otherwise
Use the following parameters and equations which correspond to the dimensions labeled in the images:
A=
B=
C=
D=
E=
F=

172mm
77mm
104mm
62mm
10mm
Hole Wizard Standard:
Type:
Size:
Fit:
Through Hole Diameter:
Counter bore Diameter:
Counter bore Depth:
End Condition:
X = B*1.25
Y = (B*1.5)-50

ANSI Metric Counter bore

Hex Bolt ANSI B18.2.3.5M
M12
Close
15mm
25mm
10mm
Through All

Hint #1: The dimensions that are to be linked or updated and are variable will be labeled with
letters. Any dimensions that are simple value changes from one stage to another will be circled in
the images.
Hint #2: To save the most time, make use of linked dimensional values and equations.

Measure the mass of the part.

What is the mass of the part (grams)?
a)
b)
c)
d)

1628.62
603.19
1637.32
606.41

2. Update the parameters of the initial part.

Unit system: MMGS (millimeter, gram, second)
Decimal places: 2
Part origin: Arbitrary
Material: 6061 Alloy
Density = 0.0027 kg/cm^3
All holes through all unless shown otherwise
Use the following parameters and equations which correspond to the dimensions labeled in the images:
A=
B=
C=
D=
E=
F=

170mm
75mm
100mm
60mm
5mm
Hole Wizard Standard:
Type:
Size:
Fit:
Through Hole Diameter:
Counter bore Diameter:
Counter bore Depth:
End Condition:
X = B*1.25
Y = (B*1.5)-50

ANSI Metric Counter bore

Hex Bolt ANSI B18.2.3.5M
M12
Close
15mm
25mm
10mm
Through All

Hint #1: The dimensions that are to be linked or updated and are variable will be labeled with
letters. Any dimensions that are simple value changes from one stage to another will be circled in
the images.
Hint #2: To save the most time, make use of linked dimensional values and equations.

Measure the mass of the part.

What is the mass of the part (grams)?
a)
b)
c)
d)

1599.57
1600.57
1966.12
1608.88

3. Update the parameters of the initial part.

Unit system: MMGS (millimeter, gram, second)
Decimal places: 2
Part origin: Arbitrary
Material: 6061 Alloy
Density = 0.0027 kg/cm^3
All holes through all unless shown otherwise
Use the following parameters and equations which correspond to the dimensions labeled in the images:
A=
B=
C=
D=
E=
F=

186mm
91mm
124mm
62mm
8mm
Hole Wizard Standard:
Type:
Size:
Fit:
Through Hole Diameter:
Counter bore Diameter:
Counter bore Depth:
End Condition:
X = B*1.25
Y = (B*1.5)-50

ANSI Metric Counter bore

Hex Bolt ANSI B18.2.3.5M
M12
Close
15mm
25mm
10mm
Through All

Hint #1: The dimensions that are to be linked or updated and are variable will be labeled with
letters. Any dimensions that are simple value changes from one stage to another will be circled in
the images.
Hint #2: To save the most time, make use of linked dimensional values and equations.

Measure the mass of the part.

What is the mass of the part (grams)?
a)
b)
c)
d)

1963.02
1969.10
1964.02
727.41

4. Stage 2
Unit system: MMGS (millimeter, gram, second)
Decimal places: 2
Part origin: Arbitrary
Material: 6061 Alloy
Density = 0.0027 kg/cm^3
All holes through all unless shown otherwise
Use the following parameters and equations which correspond to the dimensions labeled in the images:
A=
B=
C=
D=
E=
X=
Y=

181mm
89mm
121mm
60mm
5mm
B*1.25
(B*1.5)-75

Note: The equation for Y has changed.

Hint #1: The dimensions that are to be linked or updated and are variable will be labeled with
letters. Any dimensions that are simple value changes from one stage to another will be circled in
the images.
Hint #2: To save the most time, make use of linked dimensional values and equations.

Measure the mass of the part.

What is the mass of the part (grams)?
a)
b)
c)
d)

901.80
2491.94
2431.87
2434.87

5. Stage 2 - Update the parameters of the part.

Unit system: MMGS (millimeter, gram, second)
Decimal places: 2
Part origin: Arbitrary
Material: 6061 Alloy
Density = 0.0027 kg/cm^3
All holes through all unless shown otherwise
Use the following parameters and equations which correspond to the dimensions labeled in the images:
A=
B=
C=
D=
E=
X=
Y=

174mm
82mm
114mm
64mm
10mm
B*1.25
(B*1.5)-75

Note: The equation for Y has changed.

Hint #1: The dimensions that are to be linked or updated and are variable will be labeled with
letters. Any dimensions that are simple value changes from one stage to another will be circled in
the images.
Hint #2: To save the most time, make use of linked dimensional values and equations.

Measure the mass of the part.

What is the mass of the part (grams)?
a)
b)
c)
d)

2230.60
826.15
2231.54
2209.33

Answer and Hints

1)
2)
3)
4)
5)

1628.62g
1600.57g
1964.02g
2434.87g
2230.60g

DISCLAIMER: IT IS UP TO YOU TO RESEARCH THESE HINTS. BEING A PROFESSIONAL

LEVEL CERTIFIED SOLIDWORKS USER SHOULD ALSO INCLUDE THE ABILITY TO
RESEARCH SOLIDWORKS FUNCTIONALITY. CONSULT HELP, YOUR VAR AEs, THE
ONLINE FORUMS AND BLOGS.
Hint #1: Use Global Variables to manage the dimensions that are to be changed in each stage. This will
ensure that the dimensions to be changed change with as few clicks and possible and with little second
guessing.
Hint #2: Change the label of the dimensions in your part to A, B, C, D, X, and Y to visually keep track
of which dimensions are changing.