Scribd
Upload
1K views

Groot Papercraft Assembly Instructions Lower

The document provides assembly instructions for creating a multi-part craft or model. It involves assembling 21 numbered parts in a specific sequence, applying glue or adhesive to connect parts together, and attaching additional elements like weights or a spring. The overall process involves assembling smaller parts into larger sub-assemblies, then connecting the sub-assemblies together to form the completed craft or model.

Uploaded by

Jose Vieira
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views

Groot Papercraft Assembly Instructions Lower

The document provides assembly instructions for creating a multi-part craft or model. It involves assembling 21 numbered parts in a specific sequence, applying glue or adhesive to connect parts together, and attaching additional elements like weights or a spring. The overall process involves assembling smaller parts into larger sub-assemblies, then connecting the sub-assemblies together to form the completed craft or model.

Uploaded by

Jose Vieira
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

1

Assemble part 1. Set aside

Assemble part 5. Add weights before sealing then set aside.

Assemble parts 9 and 10. Set aside.

Assemble parts 2, 3 and 4.

Tip: Put the double adhesive on the bigger tab instead, for a cleaner finish.

Assemble parts 6 and 8. Glue part 8 to the end of part 6.

Glue parts 5 and 4 to parts 9 and 10.

Glue part 5 to the inside of part 1, aligning to the marker outside.


Assemble part 6 to come out of the pots hole. Dont glue anything.

Assemble part 7 to cover the pot, aligning the 1 markers. Pull out part 8 to come out of the horizontal slit. Glue part 7 tabs to part 1.

Assemble parts 11 and 12.

Add glue

11

10

Assemble parts 13 and 14, then glue together.

Glue 11 to 2, and 12 to 3.

12

Glue parts 2 and 3 to parts


Add double adhesive tape

14

13

9 and 10. Glue part 13 to part 12s planes.

Assemble parts 18 and 19.

Glue part 8 to the bottom of part 14.

Glue carefully to this spot.

15

Glue to part 11s planes.


Glue carefully to this spot.

16

17

18

Glue part 25 together and cut, then glue to part 20 to form the crown. Set aside.

Glue part 25 together, then glue to part 17.

Glue the scalp of part 20 to the inside of part 17, then glue all tabs together to form the head.

Note: The mouth in the final template is in a new position that will not match the pictures.

19

Glue 27, 28, and 29 together, the cut along.

20

Assemble 21-24.

Connect 21 to 22 and 23 to 24.

Glue the arms and branches to the body.


Glue spring to part 18.

21

Make a spring from parts 15 and 16.

22

Glue the head onto the spring.

You might also like