0% found this document useful (0 votes)
273 views

Welding Drawing Lecture Note

The document discusses welding drawing standards and symbols. It covers topics such as part preparation methods, common welding standards like ASTM A285 and A516/A537 for low carbon steel, welding face preparations, how to represent welds using basic symbols on drawings instead of detailed drawings, four common standards for locating welding symbols on drawings, mixed welding symbols, surface symbols for flat, convex and concave welds, extra symbols like weld all around and weld at installation site, and representing welding dimensions using symbols.

Uploaded by

imamudeen
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
273 views

Welding Drawing Lecture Note

The document discusses welding drawing standards and symbols. It covers topics such as part preparation methods, common welding standards like ASTM A285 and A516/A537 for low carbon steel, welding face preparations, how to represent welds using basic symbols on drawings instead of detailed drawings, four common standards for locating welding symbols on drawings, mixed welding symbols, surface symbols for flat, convex and concave welds, extra symbols like weld all around and weld at installation site, and representing welding dimensions using symbols.

Uploaded by

imamudeen
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 18

Welding Drawing

Topics:
1.
2.
3.
4.
5.
6.
7.
8.

Arc-Welding

Parts Preparation
Welding Standard
Welding Face Preparations
Welding Drawing
Basic Welding Symbol
Welding Symbols Location
Mix Symbols
Welding Surface Symbols

TIG-Welding

MIG-Welding (Metal-Inert-Gas Welding)

1. Part Preparations
There are 4 standard of welding parts preparation:

a. Single-V

b.Single-Bevel

c. Single-U

Standard sizes of welding face for


parts that have a cross section area
more than 4 inches:

2. Welding Standard
ASTM A285: Welding wire #B 6010 for low carbon steel

Before

After

d. Single-J

ASTM A516 or A537: Welding wire #E 8018-G for low carbon steel

Before

After

3. Welding Face Preparations

4. Welding Drawing
Drawing of actual welding part is difficult and dont need. Symbol could be used to
represent the welding part. The pictures show the example of fillet weld:

Fillet weld
5. Basic Welding Symbol

using symbol

Use of symbol:

Part

Views

Symbol

6. Welding Symbols Location


There are 4 standards related to the location of welding symbols:
1. ISO (International Organization for Standardization)
2. DIN (Deutcheindustrie Norman)
3. AWS (American Welding Society)
4. JIS (Japanese Industrial Standard)
ISO and DIN are the same. AWS and JIS are the same.

7. Mix Symbols

8. Welding Surface Symbols


There are 3 types of welding surface symbols:
Type
Symbol
Flat
Convex
Concave
Example:

9. Extra Symbols
Weld all around

Weld at installation site

10. Wilding dimension (using symbols)

Example:

You might also like