Scribd
Upload
200 views10 pages

Intro To DSK6713

This document provides an introduction to Code Composer Studio and the TMS320C6713 DSP Starter Kit. It discusses the capabilities and installation of CCS, an overview of the DSK board and its memory map, and hardware setup instructions for the DSK.

Uploaded by

BhushanHumney
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
200 views10 pages

Intro To DSK6713

This document provides an introduction to Code Composer Studio and the TMS320C6713 DSP Starter Kit. It discusses the capabilities and installation of CCS, an overview of the DSK board and its memory map, and hardware setup instructions for the DSK.

Uploaded by

BhushanHumney
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 10

Introduction to DSK 6713

Bhooshan Humane

Learning Objectives
Introduction to Code Composer Studio (CCS).
Installation and setup of CCS.
Introduction to the DSK.
Laboratory.

Code Composer Studio


Capabilities:
1) Integrated development environment with an
editor, debugger, project manager, profiler, etc.
2) C/C++ compiler, assembly optimizer and
linker (code generation tools).
3) Simulator.
4) Real-time operating system (DSP/BIOS).
5) Real-Time Data Exchange (RTDX) between
the Host and Target.
6) Real-time analysis and data visualization.

CCS Installation and Setup


(A) Install the CCS Software.
(B) Run CCS Setup:
Start CCS setup utility by using the following desktop
icon:

Alternatively:
Windows Start Menu -> Programs -> Texas Instruments -> Code
Composer Studio 2 (C6000) -> Setup Code Composer Studio.
Run cc_setup.exe located in: c:\ti\cc\bin\

TMS320C6713 DSP Starter Kit (DSK)


The TMS320C6713 DSP Starter Kit (DSK)
developed jointly with Spectrum Digital is a
low-cost development platform designed to
speed the development of high precision
applications based on TIs TMS320C6000
floating point DSP generation.

DSK6713 Block Diagram

C6713 DSK Memory Map


TMS320C6713
0000_0000

256 kB Internal

C6713 DSK
8 MB SDRAM

Program / Data
0180_0000

Peripheral Regs

256 kB FLASH
CPLD

8000_0000

128 MB External

9000_0000

128 MB External

A000_0000

128 MB External

B000_0000

128 MB External

FFFF_FFFF

Available via
Daughter Card
Connector

9008_0000
CPLD:
LEDs
DIP Switches
DSK status
DSK rev#
Daughter Card

DSK Hardware Setup


Notes:
The SDRAM may take a while due to the large amount of
SDRAM on the C6711 DSK.
The CODEC test performs two operations: (1) a 1kHz tone
output, and (2) an audio input to output loopback. You must
have a speaker connected to the the output jack to hear the test.
If the confidence test fails:
(1)Remove the power and parallel cable from the DSK.
(2)Reset your PC.
(3)Reconnect the power and the parallel cable.
(4)Invoke CCS.

6713 DSK

END

You might also like