Scribd
Upload
516 views3 pages

GSM Link Budget Calculator

This document contains power budget calculations for the downlink and uplink in a mobile network. It lists parameters like transmitter power, antenna gains, losses, noise figures, and required signal to noise ratios. It then calculates the maximum allowable path loss for both the downlink from the base station to mobile and uplink from mobile to base station. It also estimates cell radius for 900MHz and 1800MHz bands based on a base station height of 30m.

Uploaded by

Nirol Prasad Koju
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
516 views3 pages

GSM Link Budget Calculator

This document contains power budget calculations for the downlink and uplink in a mobile network. It lists parameters like transmitter power, antenna gains, losses, noise figures, and required signal to noise ratios. It then calculates the maximum allowable path loss for both the downlink from the base station to mobile and uplink from mobile to base station. It also estimates cell radius for 900MHz and 1800MHz bands based on a base station height of 30m.

Uploaded by

Nirol Prasad Koju
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 3

DOWNLINK Power Budget Calculation

Parameter

value

Unit

Transmitter(BTS)
Tx power
Combiner Loss
Duplex Filter Loss
Cable and Feeder loss
MHA Gain
Tx Antenna gain
EIRP including Losses
Receiver(Mobile Station)
Thermal noise density
Receiver Noise Figure
receiver noise density
receiver noise power
required Eb/No
Required C/I
required bit rate
required signal power(S)
Rx antenna gain
Cable and body loss
Slow fading constant
Slow fading margin
Fast Fade Margin
Indoor Loss
MALP(Maximum allowable path loss)

46 dBm
4 dB
4 dB
5 dB
0 dB
17 dBi
50 dBm
-174

dBm/hz
5 dB
-169 dBm/hz
dBm

13.5 dB
12 dB
13600 bps
-102 dBm
0 dBi
2 dB
1 dB
6 dB
3 dB
10 dB
dB
136

40 watt BTS

UPLINK Power Budget Calculation

Parameter

value
Transmitter(Mobile Station)

Tx power
Cable and body loss
Tx Antenna gain
EIRP including Losses
Receiver(Mobile Station)
Thermal noise density
Receiver Noise Figure
receiver noise density
Gain in GSM
required Eb/N0
required C/I
required signal power(S) (Receiving Sensitivity)
Rx antenna gain
Diversity Gain
MHA Gain
Duplex Filter Loss
Cable and Feeder loss
Slow fading margin
Fast Fade Margin
Indoor Loss
MALP(Maximum allowable path loss)

33.0 dBm
0.00 dB
0.0 dBi
33.0 dBm
-174.0 dBm/Hz
5.00 dB
-169.0 dBm/Hz
1.32 dB
13.50 dB
14.82 dB
-101.2 dBm
17.0 dBi
3.00 dB
0.00 dB
4.00 dB
5.00 dB
6.00 dB
3.00 dB
10.00 dB
144.17 dB

Power Class
4( sensitivity102dBm)
Radius of cell Calculation For GSM
For 900 MHZ
Height Of BTS
30.00 m
Radius of cell
3.1911 KM
For 1800 MHZ
Height of BTS
30.00 m
Radius of cell
1.6793 KM

You might also like