Scribd
Upload
39 views

DAD1 A, Sig 280,4 Ref Off (PRAKTIKUM/25022014.D)

This document summarizes the results of an HPLC analysis of a standard 20 ppm sample conducted on February 25, 2014. The sample was injected into an Agilent 1260 HPLC system and analyzed using a method stored on the C drive. Four peaks were detected between 0.997 and 1.350 minutes. The peak at 1.350 minutes accounted for 94.2991% of the total peak area.

Uploaded by

AtikaRahayu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
39 views

DAD1 A, Sig 280,4 Ref Off (PRAKTIKUM/25022014.D)

This document summarizes the results of an HPLC analysis of a standard 20 ppm sample conducted on February 25, 2014. The sample was injected into an Agilent 1260 HPLC system and analyzed using a method stored on the C drive. Four peaks were detected between 0.997 and 1.350 minutes. The peak at 1.350 minutes accounted for 94.2991% of the total peak area.

Uploaded by

AtikaRahayu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Data File C:\CHEM32\1\DATA\PRAKTIKUM\25022014.

D
Sample Name: standar 20 ppm
=====================================================================
Acq. Operator
: SYSTEM
Acq. Instrument : hplc 1260 agilent
Location : Vial 1
Injection Date : 2/25/2014 9:22:52 AM
Inj Volume : No inj
Acq. Method
: C:\CHEM32\1\METHODS\DEF_LC.M
Last changed
: 2/25/2014 9:15:47 AM by SYSTEM
(modified after loading)
Analysis Method : C:\CHEM32\1\METHODS\PRAK KAFEIN.M
Last changed
: 2/25/2014 9:29:38 AM by SYSTEM
Sample Info
: in meoh
DAD1 A, Sig=280,4 Ref=off (PRAKTIKUM\25022014.D)
1.350

mAU
160

140

120

100

80

60

20

0.997
1.115
1.172

40

0
1

min

=====================================================================
Area Percent Report
=====================================================================
Sorted By
:
Signal
Multiplier
:
1.0000
Dilution
:
1.0000
Use Multiplier & Dilution Factor with ISTDs

Signal 1: DAD1 A, Sig=280,4 Ref=off


Peak RetTime Type Width
Area
Height
Area
#
[min]
[min]
[mAU*s]
[mAU]
%
----|-------|----|-------|----------|----------|--------|
1
0.997 BB
0.0840
21.67110
3.50963
2.2487
2
1.115 BV
0.0553
12.35117
3.66732
1.2816
3
1.172 VV
0.0618
20.91850
4.71241
2.1706
4
1.350 VB
0.0837 908.77435 166.31898 94.2991
Totals :

963.71512

178.20834

hplc 1260 agilent 2/25/2014 9:29:46 AM SYSTEM

Page

1 of 2

Data File C:\CHEM32\1\DATA\PRAKTIKUM\25022014.D


Sample Name: standar 20 ppm

=====================================================================
*** End of Report ***

hplc 1260 agilent 2/25/2014 9:29:46 AM SYSTEM

Page

2 of 2

You might also like