Scribd
Upload
227 views

Masterseal 530

MasterSeal 530 fast curing consists of a blend of moisture-activated chemicals, high-grade silica aggregates and selected cements. It waterproofs through the formation and development of crystals in water bearing capillaries and interstices. It effectively blocks the further passage of water and ensures permanent water tightness of the structure.

Uploaded by

api-283891975
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
227 views

Masterseal 530

MasterSeal 530 fast curing consists of a blend of moisture-activated chemicals, high-grade silica aggregates and selected cements. It waterproofs through the formation and development of crystals in water bearing capillaries and interstices. It effectively blocks the further passage of water and ensures permanent water tightness of the structure.

Uploaded by

api-283891975
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

MasterSeal 530

(formerly known as MasterSeal 530 FC)

Fast curing surface applied capillary waterproofer for concrete and mortar
DESCRIPTION
MasterSeal 530 fast curing consists of a blend
of moisture-activated chemicals, high-grade
silica aggregates and selected cements. It
waterproofs through the formation and development of crystals in water bearing capillaries and
interstices, effectively blocks the further passage
of water and ensures permanent water tightness
of the structure.
Dry Shake MasterSeal 530
on Horizontal Construction
Joints

Vapour permeable - Allows surface to


breathe, preventing build up of vapour
pressure.
Brushable consistency - Easy to apply by
brush or spray.
Unrestricted application - Effective against
both positive and negative water pressure.
One component - Economical to use.
PROPERTIES
Pull off bond strength

1.7 N/mm2

Supply form

Powder

Colour

Grey

Density (Mixed)

2.02 kg/lt

Setting time @ 30C

MasterSeal 530 application on vertical


construction and day work joints
RECOMMENDED USES
MasterSeal 530 is recommended for areas such
as:

Static construction joints (new construction)

Water tanks and towers, reservoirs, dams,


canals

Water treatment works, harbours

Concrete pipes, sumps, foundations

Retaining walls, lift shafts

Sea defence walls, bridge decks, jetties,


pontoons

Fast curing membrane for internal wet area


refurbishment
FEATURES AND BENEFITS

Forms crystals in concrete pores Waterproofs by becoming an integral part of


the structure. Active ingredients will not
delaminate, peel off or wear away.

Initial

15 min (approx.)

Final

50 min (approx.)

Application Temperature

> 5C

Toxicity

Non toxic

APPLICATION
New Construction:
MasterSeal 530 can be applied immediately after
the formwork has been removed, as the water
curing process required for MasterSeal 530 will
also ensure full hydration of the concrete. If
treatment is to be exposed and an aesthetically
pleasing finish is required, the MasterSeal 530,
after curing, should receive a sand / cement render
onto which the desired finish is applied.
Existing structures:
Structures subject to water leakage or ingress
must be carefully inspected to determine the
cause. Any water present should be diverted away
so that a thorough survey can be conducted. Static
cracks over 1mm must be chased out, dampened
down and repaired with an MasterEmaco repair
mortar. Dynamic cracks must be formed into
watertight movement joints and sealed, using
MasterSeal 470 elastomeric sealant.

MasterSeal 530

(formerly known as MasterSeal 530 FC)

The rate and penetration of crystalline


development will vary with the density and surface
absorption of the concrete.
In powder form, the product may be used as a dry
shake on horizontal construction joints. .
Surface Preparation:
Surfaces to be treated must be free from dust, oil,
grease, paint, residual curing compound, mould
oil or any previous surface treatment that will
impair adhesion of MasterSeal 530 treatment or
inhibit penetration of the chemicals into the
surface. These include polymer modified renders
and those substrates treated with silicon or silane
water repellents. Areas of weak or honeycombed
concrete must be repaired. Hollow de-bonded
renders must be removed and made good.
Surfaces to be treated that are not damp must be
pre-wetted and still be damp at the time of
application.
Mixing:
Mechanical mixing is necessary. Mix 25kg of
MasterSeal 530 with 7 to 8L of water using a
slow speed (600rpm), heavy duty electric drill
fitted with a grout stirrer.
When the mixer is running, add clean mixing
water to the MasterSeal 530 powder to achieve
the consistency required. Mix for at least 3
minutes to get a lump-free, homogeneous and
creamy consistency. If applying to vertical
surfaces, water may have to be reduced to
achieve the desired consistency to minimise the
run off on the surface. Do not add additional
water after initial mixing.
Placing:
MasterSeal 530 mixes are applied by brush or
spray onto the dampened substrate. Apply the
material in 2 coats at right angles, the second

coat whilst the first is firm, but green usually 13 hours after first coat (dependant on
temperature). Plugging leaks:
Leaks and holes drilled to relieve water pressure
can be sealed permanently using MasterSeal
590. Slow drying of MasterSeal 530 membrane
ensures homogeneous curing and high
waterproofing characteristics. MasterSeal 530
must be protected against rapid drying due to
high temperatures or wind. Cure by wet burlap,
plastic sheet or mist spraying. Curing compounds
are unsuitable for use with MasterSeal 530
system technology. Tanks and other water
retaining structures may be filled 24 hours after
final MasterSeal 530 application as crystal
growth is accelerated by water pressure.
ESTIMATING DATA
The recommended coverage of MasterSeal 530
per coat is:
By brush : 1 1.5 kg/m2
By trowel: 2 2.5 kg/m2
Actual consumption depends on the porosity and
surface profile of the substrate and wastage.
PACKAGING
MasterSeal 530 is available in 25kg bags.
SHELF LIFE
MasterSeal 530 has a shelf life of 12 months.
Store out of direct sunlight, clear of the ground on
pallets protected from rainfall
PRECAUTIONS
For the full health and safety hazard information
and how to safely handle and use this product,
please make sure that you obtain a copy of the
BASF Material Safety Data Sheet (MSDS) from
our office or our website.

MasterSeal_530 asean v2-0414


The technical information and application advice given in this BASF publication are based on the present state of
STATEMENT OF our best scientific and practical knowledge. As the information herein is of a general nature, no assumption can be
RESPONSIBILITY made as to a product's suitability for a particular use or application and no warranty as to its accuracy, reliability or
completeness either expressed or implied is given other than those required by law. The user is responsible for
checking the suitability of products for their intended use.

= registered trademark of BASF group in many countries

NOTE

Field service where provided does not constitute supervisory responsibility. Suggestions made by BASF
Construction Chemicals either orally or in writing may be followed, modified or rejected by the owner, engineer or
contractor since they, and not BASFConstructio Chemicals, are responsible for carrying out procedures
appropriate to a specific application.

BASF Construction Chemicals offices in ASEAN


Singapore
Tel: +65-6861-6766
Fax: +65-6861-3186

Malaysia
Tel: +60-3-5628-3888
Fax: +60-3-5628-3776

Website: www.ap.cc.basf.com

Indonesia
Tel: +62-21-2988-6000
Fax: +62-21-2988-5935

Thailand
Tel: +66-2-664-9222
Fax: +66-2-664-9267

Vietnam
Tel: +84-650-374-3100
Fax: +84-650-374-3200

Philippines
Tel: +63-2-889-4321
Fax: +63-2-889-4361

Hong Kong
Tel:+852-2408-4400
Fax:+852-2408-4401

You might also like