Scribd
Upload
24 views1 page

How To Measure Your Doors and Drawer Fronts:: (Grain Runs Horizontally) Width

To measure doors and drawer fronts for ordering: 1. Measure the width and height of all door and drawer openings and round down to the nearest 1/16 inch. 2. For doors with a 1/2 inch overlay, add 1 inch to the width and height of each opening measurement. For inset doors, subtract at least 1/4 inch from both measurements. 3. Order sizes may be up to 1/16 inch different than the requested sizes due to manufacturing tolerances.

Uploaded by

nm.nandita5938
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
24 views1 page

How To Measure Your Doors and Drawer Fronts:: (Grain Runs Horizontally) Width

To measure doors and drawer fronts for ordering: 1. Measure the width and height of all door and drawer openings and round down to the nearest 1/16 inch. 2. For doors with a 1/2 inch overlay, add 1 inch to the width and height of each opening measurement. For inset doors, subtract at least 1/4 inch from both measurements. 3. Order sizes may be up to 1/16 inch different than the requested sizes due to manufacturing tolerances.

Uploaded by

nm.nandita5938
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

How to measure your doors and drawer fronts:

Door Width

Door Height

Drawer Width

Drawer Height

Height

Height (Grain)

Door
Drawer Front
A. Pick your hinges first: This
will determine what size
overlay is needed.
B. Measuring opening size:
(Do not order by these
Width
opening size dimensions.)
(Grain runs horizontally)
Measure all door
openings, round down
Tolerances: Sizes
received
may be 1/16"
to the nearest 1/16".
larger or smaller than
Always write width first.
sizes ordered.
Width
C. Figuring order sizes:
For 1/2" overlay add 1" to the width and 1" to the height of each
opening size. If your application requires a different overlay, adjust
the measurements accordingly. For inset applications, subtract no less
than 1/4" on both width and height of cabinet opening measurements.
Doors and drawer fronts will be custom-made to the sizes you specify,
so measure carefully. Standard drawer wood grain runs horizontally.
Order two doors to cover any opening more than 22" wide.
Doors over 26" in width and/or 48" to 50" in height may have
double panels.
Minimum Size Information: If you use a minimum size you must add
4" to the other dimension.
We guarantee no warping or cracking on doors sized up to 23" wide
and/or 46" high; drawer fronts up to 30" wide and/or 12" high.
Doors over 50" require an additional $75 charge per order.
Please check measurements carefully accuracy is essential!
25% restocking charge on custom orders. Minimum charge per drawer
is 216 square inches.

You might also like