0% found this document useful (0 votes)

126 views

Coldformed Truss

This document provides design calculations for a cold formed steel truss located in Kandahar, Afghanistan. It includes project details, assumptions, codes and standards used, modeling and analysis methodology, and material properties. The steel structural system was analyzed and designed to support lateral and gravity loads according to specifications. Load cases, including seismic, wind, dead and live loads, were considered in the analysis and design of the steel frames and foundations.

Uploaded by

Faisal Amin

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as DOCX, PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

126 views

Coldformed Truss

Uploaded by

Faisal Amin

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as DOCX, PDF, TXT or read online on Scribd

You are on page 1/ 123

P R O J E C T:

ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

CONTRACT #
W5J9LE-12-C -0019

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

U.S ARMY CORPS

OF ENGINEERS

General Assumption:
1.1 Scope of work
This design calculation covers the Analysis & Design of the COLD FORMED TRUSS .
Note: Structural System is Intermediate Steel Moment Frame, as per ASCE 7-05, Table 12-2.1 with R=4.5.

1.2 Unite of Measurement

All unites used in this design calculation shall be in SI and MKS systems unless specified otherwise.

1.3 Codes & Standards

The following Codes & Standards are used as reference & guidance in design calculating.
a ACI 31808 (American Concrete Institute).
b IBC 2006 (International Building Code).
c ASCE 705 (American Society of Civil Engineers) Minimum Design Loads For Buildings And Other
Structures.
d AISC 2005 (American Institute of Steel Construction).

1.4 Software & Program Used

The Analysis & Design of the SUNSHADE STEEL STRUCTURE has been carried out with ETABS
(EXTENDED THREE DIMENSIONAL ANALYSIS BUILDING SYSTEM) & SAFE (SLAB ANALYSIS BY THE
FINIT ELEMENT METHOD) in accordance to relevant Codes & Standards as in Para,

1.5 Structural System Design Narrative:

The steel structural system has been analyzed and designed to support the lateral (wind or
earthquake) . Vertical (gravity) loads. This structural system selected as per ASCE 05-7, Table12.2.1, as intermediate steel moment frame with the following parameters as per SOW:

1.6 Loading:
Seismic Load:
S1= 1.28
Ss=0.51
Site class = D

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

U.S ARMY CORPS

OF ENGINEERS

Wind Load:
Basic wind Velocity is 135 Km/hr (85 mph) in accordance Metrological Design Data ASCE 705,
Exposure Category (C).
DEAD LOADS:
Please see ETABS & SAFE Steel Structure Calculation Reports for loadings. The Dead Load reactions
given in Steel Structure Calculation Reports will be used for foundation designs by adapting them to
Combinations of LRFD (IBC2006 Section1605).
LIVE LOADS:
Please see ETABS & SAFE Steel Structure Calculation Reports for loadings. The Live Load reactions
given in Steel Structure Calculation Reports will be used for foundation designs by adapting them to
Combinations of LRFD (IBC2006 Section1605).
SEISMIC LOADS
Please see ETBAS & SAFE Steel Structure Calculation Reports for loadings. The Seismic Load
reactions given in Steel Structure Calculation Reports will be used for foundation designs by
adapting them to Combinations of (ASCE 7-05).
WIND LOADS
Please see ETABS & SAFE Steel Structure Calculation Reports for loadings. The Wind Load reactions
given in Steel Structure Calculation Reports will be used for foundation designs by adapting them to
Combinations of (ASCE 05-7).

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

U.S ARMY CORPS

OF ENGINEERS

2.1 Structural Concept

Outline / Sketch of the SUNSHADE STEEL STRUCTURE.

3.0 Modeling
The SUNSHADE STEEL STRUCTURE is modeled as three Dimensional space using SAP.
3.1 Design Philosophy

3.2 Basic Design

Method of Analysis & Design is based on ACI318-08, IBC2009, ASCE 7-05 & AISC2005 Codes and
Standards.
The Structure is designed for all loads combination as specified in design criteria and Codes.
3.3 Analysis Methodology
The three dimensional analysis is carried out using ETABS Program. The Analysis is done for various
Load combinations for the structures.
Dead Loads:
Additional Dead Load = 20 Kg/m2

Live Loads:
Live Load = 100 Kg/m2

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

CONTRACT #
W5J9LE-12-C -0019

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

U.S ARMY CORPS

OF ENGINEERS

BUILDING ANALYSIS:
The SUNSHADE STEEL STRUCTURE analyzed based on lateral and vertical loads. The steel frames
(Columns & Beams) are designed by ETABS (Extended Three Dimensional Analysis of the Building System),
and accordingly all reactions are exported in to SAFE(Slab Analysis by the Finite Element Method), And
foundation has been designed, for more information please refer to enclosed software output data.
These programs are the CSI (Computer and Structural Inc) products.

The seismic and wind loads are computed by program. The seismic load is calculated based on IBC
2006 and wind load is calculated based on ASCE 7-05.
Program automatically compares seismic and wind loads and design the SUNSHADE STEEL
STRUCTURE for critical condition. Concrete elements are designed based on ACI318-05 (American
Concrete Institute) code. The MAT FOOTING is designed based on various types of combinations
according to proposed code. The final design results are reported based on critical combination.
Here the SUNSHADE STEEL STRUCTURE has been designed as bellow.

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

U.S ARMY CORPS

OF ENGINEERS

BUILDING INPUT DATA: Unit Kg-m

Table: Material Properties 03d - Cold Formed Data

Table: Material Properties 03d - Cold Formed Data
Material
Fy
Fu
SSHysType
Kgf/mm2
Kgf/mm2
ColdFormed
23.201
31.638
Kinematic

Table: Frame Section Properties 01 - General, Part 1 of 6

SectionName
HAT FURRING
CHANNEL
STUD
STUD RAFTER
TRACK

Table: Frame Section Properties 01 - General, Part 1 of 6

Material
Shape
t3
t2
mm
mm
ColdFormed
Cold Formed Hat
81.000
38.000

tw
mm
1.590

Radius
mm
5.000

ColdFormed
ColdFormed
ColdFormed

28.000
38.000
39.000

1.270
1.270
1.270

0.000
0.000
0.000

Table: Frame Section Properties 01 - General, Part 2 of 6

LipDepth
Area
TorsConst
I33
I22
mm
mm2
mm4
mm4
mm4
15.000
271.40
228.71
323733.21
55817.61

AS2
mm2
121.21

AS3
mm2
78.93

25628.62
29155.97
31325.17

111.07
113.61
113.61

64.67
93.29
95.83

Table: Frame Section Properties 01 - General, Part 3 of 6

S33
S22
Z33
Z22
R33
mm3
mm3
mm3
mm3
mm
6005.07
2283.92
6005.07
2283.92
34.537

R22
mm
14.341

ConcCol

5687.91
5934.60
6048.24

10.901
11.799
12.156

No
No
No

Cold Formed C
Cold Formed C
Cold Formed C

90.000
92.000
92.000

Table: Frame Section Properties 01 - General, Part 2 of 6

SectionName
HAT FURRING
CHANNEL
STUD
STUD RAFTER
TRACK

15.000
0.000
0.000

215.68
209.44
211.98

115.96
112.60
113.97

255956.07
272991.81
278219.09

Table: Frame Section Properties 01 - General, Part 3 of 6

SectionName
HAT FURRING
CHANNEL
STUD
STUD RAFTER
TRACK

1368.92
1008.90
1060.20

5687.91
5934.60
6048.24

1368.92
1008.90
1060.20

34.449
36.103
36.228

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

U.S ARMY CORPS

OF ENGINEERS

Table: Frame Section Properties 01 - General, Part 4 of 6

SectionName

ConcBeam

HAT FURRING
CHANNEL
STUD
STUD RAFTER
TRACK

Table: Frame Section Properties 01 - General, Part 4 of 6

Color
TotalWt
TotalMass
FromFile
Kgf
Kgf-s2/mm
1769982
0.00
0.0000
No

No
No
No

Red
Yellow
Green

331.50
135.00
127.78

0.0338
0.0138
0.0130

No
No
No

AMod

A2Mod

1.000000

1.000000
1.000000
1.000000

Table: Frame Section Properties 01 - General, Part 5 of 6

SectionName
HAT FURRING
CHANNEL
STUD
STUD RAFTER
TRACK

A3Mod

Table: Frame Section Properties 01 - General, Part 5 of 6

JMod
I2Mod
I3Mod
MMod

WMod

1.000000

1.000000
1.000000
1.000000

GUID

Table: Frame Section Properties 01 - General, Part 6 of 6

Table: Frame Section Properties 01 - General, Part 6 of 6
SectionName
Notes
HAT FURRING
CHANNEL
STUD
STUD RAFTER
TRACK

Added 11/11/2012 9:51:54 AM

Added 11/11/2012 10:00:12 AM
Added 11/11/2012 10:01:08 AM
Added 11/11/2012 9:58:07 AM

Table: Frame Section Assignments

Frame

SectionType

3
4
5
6
7
8
9
10
11
12
13
14
15
16
17

Table: Frame Section Assignments

AutoSelect
AnalSect
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.

STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER

DesignSect

MatProp

STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER

Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

Frame

SectionType

18
19
28
30
31
32
33
54
55
56
57
58
60
61
62
63
64
65
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113

Cold Formed C
Cold Formed C
Cold Formed C
Cold Formed C
Cold Formed C
Cold Formed C
Cold Formed C
Cold Formed C
Cold Formed C
Cold Formed C
Cold Formed C
Cold Formed C
Cold Formed C
Cold Formed C
Cold Formed C
Cold Formed C
Cold Formed C
Cold Formed C
Cold Formed C
Cold Formed C
Cold Formed C
Cold Formed C
Cold Formed C
Cold Formed C
Cold Formed C
Cold Formed C
Cold Formed C
Cold Formed C
Cold Formed C
Cold Formed C
Cold Formed C
Cold Formed C
Cold Formed C
Cold Formed C
Cold Formed C
Cold Formed C
Cold Formed C
Cold Formed C
Cold Formed C
Cold Formed C
Cold Formed C
Cold Formed C
Cold Formed C
Cold Formed C
Cold Formed C
Cold Formed C
Cold Formed C
Cold Formed C
Cold Formed C
Cold Formed C

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Frame Section Assignments

AutoSelect
AnalSect
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.

STUD RAFTER
STUD RAFTER
STUD
STUD
STUD
STUD
STUD
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD RAFTER
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER

U.S ARMY CORPS

OF ENGINEERS

DesignSect

MatProp

Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

Frame

SectionType

114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
240
241
242
243
244
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Frame Section Assignments

STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD
STUD
STUD
STUD
STUD
STUD
STUD RAFTER
STUD
STUD RAFTER
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD

U.S ARMY CORPS

OF ENGINEERS

DesignSect

MatProp

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

Frame

SectionType

266
267
268
269
271
272
273
274
275
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
302
303
304
305
306
308
309
310
311
312
313
314
315
316
317
318
319

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Frame Section Assignments

STUD
STUD
STUD
STUD
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD
STUD
STUD
STUD
STUD
STUD
STUD RAFTER
STUD
STUD RAFTER
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD
STUD
STUD
STUD
STUD
STUD
STUD RAFTER
STUD
STUD RAFTER
STUD
STUD
STUD

U.S ARMY CORPS

OF ENGINEERS

DesignSect

MatProp

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

Frame

SectionType

320
321
322
323
324
325
326
327
328
329
330
331
333
334
335
336
337
339
340
341
342
343
344
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Frame Section Assignments

STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD RAFTER
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD

U.S ARMY CORPS

OF ENGINEERS

DesignSect

MatProp

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

Frame

SectionType

373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Frame Section Assignments

STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD

U.S ARMY CORPS

OF ENGINEERS

DesignSect

MatProp

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

Frame

SectionType

423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Frame Section Assignments

STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK

U.S ARMY CORPS

OF ENGINEERS

DesignSect

MatProp

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

Frame

SectionType

473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
503
504
505
506

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Frame Section Assignments

AutoSelect
AnalSect
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.
N.A.

U.S ARMY CORPS

OF ENGINEERS

DesignSect

MatProp

TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
STUD
STUD
STUD
STUD

Table: Load Case Definitions, Part 1 of 2

Case

Type

DEAD
MODAL
DL
LIVE
EQX
EQY
WIND
WIND-2
WIND-3
WIND-4
WIND-5
WIND-6
WIND-7
WIND-8

LinStatic
LinModal
LinStatic
LinStatic
LinStatic
LinStatic
LinStatic
LinStatic
LinStatic
LinStatic
LinStatic
LinStatic
LinStatic
LinStatic

Table: Load Case Definitions, Part 1 of 2

InitialCond
ModalCase
BaseCase
DesTypeOpt
Zero
Zero
Zero
Zero
Zero
Zero
Zero
Zero
Zero
Zero
Zero
Zero
Zero
Zero

Prog Det
Prog Det
Prog Det
Prog Det
Prog Det
Prog Det
Prog Det
Prog Det
Prog Det
Prog Det
Prog Det
Prog Det
Prog Det
Prog Det

DesignType

DesActOpt

DEAD
OTHER
DEAD
DEAD
QUAKE
QUAKE
WIND
OTHER
OTHER
OTHER
OTHER
OTHER
OTHER
OTHER

Prog Det
Prog Det
Prog Det
Prog Det
Prog Det
Prog Det
Prog Det
Prog Det
Prog Det
Prog Det
Prog Det
Prog Det
Prog Det
Prog Det

P R O J E C T:

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

Case

Type

WIND-9
WIND-10
WIND-11
WIND-12

LinStatic
LinStatic
LinStatic
LinStatic

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
U.S ARMY CORPS
OF ENGINEERS

C O L D F O M R E D T R U SS

Table: Load Case Definitions, Part 1 of 2

InitialCond
ModalCase
BaseCase
DesTypeOpt
Zero
Zero
Zero
Zero

Prog Det
Prog Det
Prog Det
Prog Det

DesignType

DesActOpt

OTHER
OTHER
OTHER
OTHER

Prog Det
Prog Det
Prog Det
Prog Det

Table: Load Case Definitions, Part 2 of 2

Table: Load Case Definitions, Part 2 of 2
RunCase
CaseStatus
GUID

Case

DesignAct

AutoType

DEAD

NonComposite
Other
NonComposite
NonComposite
Short-Term
Composite
Short-Term
Composite
Short-Term
Composite
Other
Other
Other
Other
Other
Other
Other
Other
Other
Other
Other

None

Yes

Finished

None
None

Yes
Yes

Finished
Finished

None

Yes

Finished

None

Yes

Finished

None

Yes

Finished

None

Yes

Finished

None
None
None
None
None
None
None
None
None
None
None

Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes

Finished
Finished
Finished
Finished
Finished
Finished
Finished
Finished
Finished
Finished
Finished

MODAL
DL
LIVE
EQX
EQY
WIND
WIND-2
WIND-3
WIND-4
WIND-5
WIND-6
WIND-7
WIND-8
WIND-9
WIND-10
WIND-11
WIND-12

Notes

Table: Load Pattern Definitions

LoadPat

DesignType

DEAD
DL
LIVE
EQX
EQY
WIND

DEAD
DEAD
DEAD
QUAKE
QUAKE
WIND

Table: Load Pattern Definitions

SelfWtMult
AutoLoad
GUID
1.000000
0.000000
0.000000
0.000000
0.000000
0.000000

IBC2009
IBC2009
ASCE7-10

Notes

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
U.S ARMY CORPS
OF ENGINEERS

C O L D F O M R E D T R U SS

Table: Auto Seismic - IBC2009, Part 1 of 4

LoadPat

Dir

EQX
EQY

X
Y

Table: Auto Seismic - IBC2009, Part 1 of 4

PercentEcc EccOverride
PeriodCalc
CtAndX
0.050000
0.050000

No
No

Prog Calc
Prog Calc

UserZ

0.028ft, 0.8
0.028ft, 0.8

No
No

8.000000
8.000000

Table: Auto Seismic - IBC2009, Part 2 of 4

LoadPat
EQX
EQY

Omega
3.000000
3.000000

Table: Auto Seismic - IBC2009, Part 2 of 4

Cd
I
AccOption
5.500000
5.500000

1.000000
1.000000

User
User

1.280000
1.280000

0.510000
0.510000

SD1

TUsed
Sec
0.0190
0.0093

TL
Sec
8.000000
8.000000

Table: Auto Seismic - IBC2009, Part 3 of 4

LoadPat

SiteClass

EQX
EQY

D
D

Table: Auto Seismic - IBC2009, Part 3 of 4

Fa
Fv
SDS
1.000000
1.000000

1.500000
1.500000

0.853333
0.853333

0.510000
0.510000

CoeffUsed
0.106667
0.106667

Table: Auto Seismic - IBC2009, Part 4 of 4

Table: Auto Seismic - IBC2009, Part 4 of 4
LoadPat
WeightUsed
BaseShear
Kgf
Kgf
EQX
973.14
103.80
EQY
973.14
103.80

Table: Auto Wind - ASCE7-10, Part 1 of 2

LoadPat

ExposeFrom

WIND

Areas And Frames

Table: Auto Wind - ASCE7-10, Part 1 of 2

Angle
UserZ
WindSpeed
Degrees
0.000

mph
70.00

Table: Auto Wind - ASCE7-10, Part 2 of 2

LoadPat
WIND

Table: Auto Wind - ASCE7-10, Part 2 of 2

GustFactor
Kd
SolidRatio
0.850000

0.850000

0.200000

ExpWidth
From diaphs

Exposur
e
C

Kzt

1.000000

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

CONTRACT #
W5J9LE-12-C -0019

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

BUILDING MEMBARS LABLE:

BUILDING MEMBARS SECTION:

U.S ARMY CORPS

OF ENGINEERS

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

DESIGN & ANALYSIS OUTPUT DATA: KG-M

Table: Cold Formed Design 1 - Summary Data - AISI-ASD96, Part 1 of 2

Frame
54
55
56
57
58
60
61
62
63
64
65
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
240
241
242
243
244
246
247
248
249
250
251
252
253
254

Table: Cold Formed Design 1 - Summary Data - AISI-ASD96, Part 1 of 2

DesignSect
DesignType
Status
Ratio
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD RAFTER
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD
STUD
STUD
STUD
STUD
STUD
STUD RAFTER
STUD
STUD RAFTER

Brace
Brace
Brace
Brace
Brace
Column
Column
Column
Column
Column
Column
Column
Brace
Column
Brace
Brace
Brace
Column
Column
Column
Column
Column
Column
Column
Column
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Column
Column
Column
Column
Column
Column
Brace
Column
Brace

No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages

0.222427
0.315016
0.252803
0.238934
0.241552
0.011323
0.021625
0.028737
0.039639
0.084173
0.046702
0.129086
0.136145
0.000000
0.084998
0.079212
0.008359
0.011359
0.021572
0.028715
0.039584
0.083932
0.047133
0.122200
0.000000
0.074729
0.089105
0.008359
0.241036
0.342679
0.239294
0.239558
0.238028
0.009707
0.020847
0.029313
0.041871
0.088181
0.053671
0.405441
0.016383
0.111482

RatioType
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
Major Shear
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
Major Shear
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM

U.S ARMY CORPS

OF ENGINEERS

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
271
272
273
274
275
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
302
303
304
305
306
308

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Cold Formed Design 1 - Summary Data - AISI-ASD96, Part 1 of 2

DesignSect
DesignType
Status
Ratio
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD
STUD
STUD
STUD
STUD
STUD
STUD RAFTER
STUD
STUD RAFTER
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD

Column
Brace
Brace
Brace
Column
Column
Column
Column
Column
Column
Column
Column
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Column
Column
Column
Column
Column
Column
Brace
Column
Brace
Column
Brace
Brace
Brace
Column
Column
Column
Column
Column
Column
Column
Column
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Column

APPROVED
BY:
SCE

0.000000
0.080641
0.078699
0.008359
0.009776
0.020829
0.029317
0.041869
0.088190
0.053652
0.016435
0.000000
0.079649
0.078372
0.008359
0.235294
0.340965
0.239459
0.240851
0.237874
0.009433
0.020318
0.028573
0.040710
0.086168
0.051843
0.356620
0.016995
0.114193
0.000000
0.079685
0.078266
0.008359
0.009500
0.020301
0.028579
0.040713
0.086172
0.051828
0.017019
0.000000
0.079847
0.078063
0.008359
0.236409
0.344752
0.240940
0.240621
0.237349
0.009765

RatioType
Major Shear
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
Major Shear
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
Major Shear
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
Major Shear
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM

U.S ARMY CORPS

OF ENGINEERS

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
333
334
335
336
337
339
340
341
342
343
344
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Cold Formed Design 1 - Summary Data - AISI-ASD96, Part 1 of 2

DesignSect
DesignType
Status
Ratio
STUD
STUD
STUD
STUD
STUD
STUD RAFTER
STUD
STUD RAFTER
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD RAFTER
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD

Column
Column
Column
Column
Column
Brace
Column
Brace
Column
Brace
Brace
Brace
Column
Column
Column
Column
Column
Column
Column
Column
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Column
Column
Column
Column
Column
Column
Column
Brace
Column
Brace
Brace
Brace
Column
Column
Column
Column
Column
Column
Column
Column
Brace
Brace

APPROVED
BY:
SCE

0.020781
0.029355
0.041896
0.088299
0.053427
0.361052
0.018998
0.111437
0.000000
0.079848
0.078126
0.008359
0.009836
0.020782
0.029363
0.041900
0.088299
0.053413
0.019009
0.000000
0.080350
0.079071
0.008359
0.218958
0.317904
0.250272
0.240525
0.240507
0.011953
0.021332
0.028390
0.039408
0.080874
0.052834
0.138478
0.136369
0.000000
0.088140
0.077256
0.008359
0.011957
0.020577
0.027789
0.038913
0.080736
0.053453
0.130343
0.000000
0.073273
0.087110

RatioType
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
Major Shear
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
Major Shear
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
Major Shear
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
Major Shear
PMM
PMM

U.S ARMY CORPS

OF ENGINEERS

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

D AT E : 1 3 - N O V- 2 0 1 2

Brace
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam

U.S ARMY CORPS

OF ENGINEERS

C O L D F O M R E D T R U SS

Table: Cold Formed Design 1 - Summary Data - AISI-ASD96, Part 1 of 2

DesignSect
DesignType
Status
Ratio
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD

APPROVED
BY:
SCE

No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
See WarnMsg
See WarnMsg
See WarnMsg
See WarnMsg
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages

0.008359
0.002571
0.002571
0.002571
0.002571
0.002571
0.002571
0.002571
0.002571
0.012081
0.010681
0.010678
0.012186
0.009726
0.008237
0.008251
0.009561
0.014947
0.013106
0.013073
0.015440
0.030822
0.024792
0.024736
0.031504
0.046892
0.034273
0.034338
0.045961
0.045277
0.031409
0.031762
0.042830
0.025815
0.019882
0.021666
0.028052
0.078693
0.046570
0.052651
0.064265
0.042545
0.031792
0.031378
0.045562
0.045822
0.034349
0.034262
0.047031
0.031607

RatioType
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM
PMM

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

D AT E : 1 3 - N O V- 2 0 1 2

Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam

U.S ARMY CORPS

OF ENGINEERS

C O L D F O M R E D T R U SS

Table: Cold Formed Design 1 - Summary Data - AISI-ASD96, Part 1 of 2

DesignSect
DesignType
Status
Ratio
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK

APPROVED
BY:
SCE

0.024725
0.024803
0.030719
0.015006
0.012839
0.012802
0.015531
0.009814
0.008269
0.008295
0.009587
0.010771
0.009494
0.009491
0.010883
0.002571
0.002571
0.002571
0.002571
0.002571
0.002571
0.002571
0.002571
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
503
504
505
506
3
4
5
6
7
8
9
10
11

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

D AT E : 1 3 - N O V- 2 0 1 2

U.S ARMY CORPS

OF ENGINEERS

C O L D F O M R E D T R U SS

Table: Cold Formed Design 1 - Summary Data - AISI-ASD96, Part 1 of 2

DesignSect
DesignType
Status
Ratio
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD RAFTER

APPROVED
BY:
SCE

0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.037106
0.017329
0.023627
0.040085
0.052755
0.054809
0.054688
0.052957
0.053271
0.056012
0.181223
0.187738
0.061308

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame
12
13
14
15
16
17
18
19
28
30
31
32
33
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

D AT E : 1 3 - N O V- 2 0 1 2

Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Beam
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace

U.S ARMY CORPS

OF ENGINEERS

C O L D F O M R E D T R U SS

Table: Cold Formed Design 1 - Summary Data - AISI-ASD96, Part 1 of 2

DesignSect
DesignType
Status
Ratio
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD
STUD
STUD
STUD
STUD
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER

APPROVED
BY:
SCE

0.136392
0.241757
0.239552
0.252874
0.315852
0.223951
0.222700
0.750033
0.004161
0.250362
0.128450
0.257782
0.135638
0.061308
0.111452
0.237947
0.239705
0.239522
0.342961
0.240420
0.237815
0.403537
0.061308
0.114192
0.237872
0.240850
0.239458
0.340964
0.235289
0.237858
0.356620
0.061308
0.111472
0.237435
0.240490
0.240723
0.344476
0.237051
0.232604
0.362963
0.061308
0.136686
0.240920
0.240797
0.250991
0.318053
0.222012
0.218944
0.772298
0.748277

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame
136
137
138

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2

Table: Cold Formed Design 1 - Summary Data - AISI-ASD96, Part 1 of 2

DesignSect
DesignType
Status
Ratio
STUD RAFTER
STUD RAFTER
STUD RAFTER

Brace
Brace
Brace

U.S ARMY CORPS

OF ENGINEERS

C O L D F O M R E D T R U SS

No Messages
No Messages
No Messages

RatioType

0.220719
0.769472
0.214753

PMM
PMM
PMM

Table: Cold Formed Design 1 - Summary Data - AISI-ASD96, Part 2 of 2

Frame
54
55
56
57
58
60
61
62
63
64
65
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
240
241
242
243
244
246
247
248
249
250
251
252

Table: Cold Formed Design 1 - Summary Data - AISI-ASD96, Part 2 of 2

Combo
Location
ErrMsg
mm
DCLD2
0.00
No Messages
DCLD2
1173.17
No Messages
DCLD2
0.00
No Messages
DCLD2
1173.17
No Messages
DCLD2
0.00
No Messages
DCLD3
192.86
No Messages
DCLD3
385.71
No Messages
DCLD3
578.57
No Messages
DCLD3
771.43
No Messages
DCLD3
964.29
No Messages
DCLD2
1157.14
No Messages
DCLD3
0.00
No Messages
DCLD2
0.00
No Messages
DCLD2
0.00
No Messages
DCLD2
0.00
No Messages
DCLD3
1506.32
No Messages
DCLD2
0.00
No Messages
DCLD3
192.86
No Messages
DCLD3
385.71
No Messages
DCLD3
578.57
No Messages
DCLD3
771.43
No Messages
DCLD3
964.29
No Messages
DCLD2
1157.14
No Messages
DCLD3
0.00
No Messages
DCLD2
0.00
No Messages
DCLD3
0.00
No Messages
DCLD3
1506.32
No Messages
DCLD3
0.00
No Messages
DCLD2
0.00
No Messages
DCLD2
1173.17
No Messages
DCLD2
1173.17
No Messages
DCLD2
1173.17
No Messages
DCLD2
0.00
No Messages
DCLD2
192.86
No Messages
DCLD2
385.71
No Messages
DCLD2
578.57
No Messages
DCLD2
771.43
No Messages
DCLD2
964.29
No Messages
DCLD2
1157.14
No Messages
DCLD2
0.00
No Messages

OF ENGINEERS

WarnMsg
No Messages
No Messages
No Messages
No Messages
No Messages

Table: Cold Formed Design 2 - PMM Details - AISI-ASD96, Part 1 of 9

Frame
54
55
56
57
58
60
61
62
63
64
65
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
240
241
242
243
244
246
247
248
249
250

Table: Cold Formed Design 2 - PMM Details - AISI-ASD96, Part 1 of 9

DesignSect
DesignType
Status
Combo
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD RAFTER
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD
STUD
STUD
STUD
STUD

DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD3
DCLD3
DCLD3
DCLD3
DCLD3
DCLD2
DCLD3
DCLD2
DCLD2
DCLD2
DCLD3
DCLD2
DCLD3
DCLD3
DCLD3
DCLD3
DCLD3
DCLD2
DCLD3
DCLD2
DCLD3
DCLD3
DCLD3
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2

Location
mm
0.00
1173.17
0.00
1173.17
0.00
192.86
385.71
578.57
771.43
964.29
1157.14
0.00
0.00
0.00
0.00
1506.32
0.00
192.86
385.71
578.57
771.43
964.29
1157.14
0.00
0.00
0.00
1506.32
0.00
0.00
1173.17
1173.17
1173.17
0.00
192.86
385.71
578.57
771.43
964.29

P
Kgf
27.83
4.97
5.54
5.15
5.26
-3.32
-4.87
-5.91
-7.33
-13.30
-5.59
-159.53
5.22
-8.464E-02
-13.91
-26.23
-8.464E-02
-3.30
-4.86
-5.91
-7.30
-12.65
-5.74
-157.01
-8.464E-02
10.57
-21.90
-8.464E-02
0.33
-0.27
-0.30
-0.28
4.911E-02
-4.08
-4.98
-5.45
-6.10
-6.73

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
271
272
273
274
275
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
302
303

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Cold Formed Design 2 - PMM Details - AISI-ASD96, Part 1 of 9

DesignSect
DesignType
Status
Combo
STUD
STUD RAFTER
STUD
STUD RAFTER
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD
STUD
STUD
STUD
STUD
STUD
STUD RAFTER
STUD
STUD RAFTER
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD RAFTER
STUD RAFTER

Column
Brace
Column
Brace
Column
Brace
Brace
Brace
Column
Column
Column
Column
Column
Column
Column
Column
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Column
Column
Column
Column
Column
Column
Brace
Column
Brace
Column
Brace
Brace
Brace
Column
Column
Column
Column
Column
Column
Column
Column
Brace
Brace
Brace
Brace
Brace

DCLD2
DCLD2
DCLD3
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD3
DCLD2
DCLD3
DCLD3
DCLD3
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD3
DCLD2
DCLD2
DCLD2
DCLD3
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD3
DCLD2
DCLD2
DCLD2
DCLD3
DCLD2
DCLD2
DCLD3
DCLD3
DCLD3
DCLD2
DCLD2

U.S ARMY CORPS

OF ENGINEERS

Location
mm
1157.14
0.00
1316.67
0.00
0.00
0.00
1506.32
0.00
192.86
385.71
578.57
771.43
964.29
1157.14
1316.67
0.00
0.00
1506.32
0.00
0.00
1173.17
1173.17
1173.17
0.00
192.86
385.71
578.57
771.43
964.29
1157.14
0.00
1316.67
0.00
0.00
0.00
1506.32
0.00
192.86
385.71
578.57
771.43
964.29
1157.14
1316.67
0.00
0.00
1506.32
0.00
0.00
1173.17

P
Kgf
-7.09
0.57
-6.69
0.11
-8.464E-02
-3.43
-3.04
-8.464E-02
-4.08
-4.98
-5.45
-6.10
-6.73
-7.09
-6.67
-8.464E-02
-2.13
-2.70
-8.464E-02
-0.27
-0.36
-0.37
-0.37
-5.226E-02
-3.95
-4.66
-4.91
-5.24
-5.65
-5.78
0.25
-5.54
4.779E-02
-8.464E-02
-2.66
-2.93
-8.464E-02
-3.95
-4.66
-4.91
-5.24
-5.65
-5.78
-5.54
-8.464E-02
-2.91
-2.63
-8.464E-02
0.18
-0.30

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame
304
305
306
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
333
334
335
336
337
339
340
341
342
343
344
346
347
348
349
350
351
352
353
354
355
356
357

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Cold Formed Design 2 - PMM Details - AISI-ASD96, Part 1 of 9

DesignSect
DesignType
Status
Combo
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD
STUD
STUD
STUD
STUD
STUD
STUD RAFTER
STUD
STUD RAFTER
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD RAFTER
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD

Brace
Brace
Brace
Column
Column
Column
Column
Column
Column
Brace
Column
Brace
Column
Brace
Brace
Brace
Column
Column
Column
Column
Column
Column
Column
Column
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Column
Column
Column
Column
Column
Column
Column
Brace
Column
Brace
Brace
Brace
Column
Column
Column
Column
Column
Column

DCLD2
DCLD2
DCLD2
DCLD3
DCLD3
DCLD3
DCLD3
DCLD3
DCLD3
DCLD2
DCLD3
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD3
DCLD3
DCLD3
DCLD3
DCLD3
DCLD3
DCLD3
DCLD2
DCLD3
DCLD3
DCLD3
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD3
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD3
DCLD2
DCLD2
DCLD2
DCLD3
DCLD2
DCLD3
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2

U.S ARMY CORPS

OF ENGINEERS

Location
mm
1173.17
1173.17
0.00
192.86
385.71
578.57
771.43
964.29
1157.14
0.00
1316.67
0.00
0.00
0.00
1506.32
0.00
192.86
385.71
578.57
771.43
964.29
1157.14
1316.67
0.00
0.00
1506.32
0.00
0.00
1173.17
0.00
1173.17
0.00
192.86
385.71
578.57
771.43
964.29
1157.14
0.00
0.00
0.00
0.00
1506.32
0.00
192.86
385.71
578.57
771.43
964.29
1157.14

P
Kgf
-0.23
-0.23
8.345E-02
-4.09
-4.98
-5.44
-6.10
-6.83
-6.83
0.90
-6.85
0.21
-8.464E-02
-2.50
-2.24
-8.464E-02
-4.09
-4.98
-5.44
-6.10
-6.83
-6.83
-6.83
-8.464E-02
-3.06
-3.50
-8.464E-02
29.64
5.53
5.46
4.98
5.10
-2.59
-4.80
-5.86
-7.42
-6.08
-15.60
-156.04
4.58
-8.464E-02
-17.92
-24.07
-8.464E-02
-2.58
-4.81
-5.86
-7.44
-6.73
-15.74

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Cold Formed Design 2 - PMM Details - AISI-ASD96, Part 1 of 9

DesignSect
DesignType
Status
Combo
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD

Column
Column
Brace
Brace
Brace
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam

DCLD3
DCLD2
DCLD3
DCLD3
DCLD3
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD2
DCLD2
DCLD3
DCLD3
DCLD3
DCLD3
DCLD2
DCLD2
DCLD3
DCLD2
DCLD3
DCLD2
DCLD3
DCLD2
DCLD3
DCLD2
DCLD2
DCLD3
DCLD2
DCLD3
DCLD2
DCLD2
DCLD3
DCLD3
DCLD2
DCLD3
DCLD3
DCLD3
DCLD3
DCLD3
DCLD3
DCLD3
DCLD3
DCLD3
DCLD2
DCLD2
DCLD3

U.S ARMY CORPS

OF ENGINEERS

Location
mm
0.00
0.00
0.00
1506.32
0.00
1200.00
1200.00
1200.00
1200.00
1200.00
1200.00
1200.00
1200.00
1200.00
1200.00
0.00
0.00
1200.00
1200.00
0.00
0.00
0.00
1200.00
0.00
1200.00
0.00
1200.00
0.00
1200.00
0.00
1200.00
0.00
1200.00
0.00
1200.00
0.00
1200.00
0.00
0.00
1200.00
1200.00
1200.00
0.00
1200.00
0.00
0.00
1200.00
0.00
1200.00
0.00

P
Kgf
-153.42
-8.464E-02
15.07
-19.72
-8.464E-02
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
-0.91
-0.33
-0.33
-0.91
-1.39
-0.57
-0.56
-1.39
0.67
-0.50
-0.51
0.67
0.89
-0.46
-0.47
0.89
1.70
-0.59
-0.60
1.71
-1.18
-0.32
-0.49
-1.30
-1.29
0.92
-7.924E-02
-4.716E-02
-7.501E-02
-0.16
0.84
1.36
-1.30
-0.50
-0.31
-1.17
1.71

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Cold Formed Design 2 - PMM Details - AISI-ASD96, Part 1 of 9

DesignSect
DesignType
Status
Combo
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK

DCLD2
DCLD3
DCLD2
DCLD2
DCLD3
DCLD2
DCLD3
DCLD3
DCLD2
DCLD3
DCLD2
DCLD3
DCLD3
DCLD2
DCLD2
DCLD2
DCLD2
DCLD3
DCLD3
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1

U.S ARMY CORPS

OF ENGINEERS

Location
mm
1200.00
0.00
1200.00
0.00
1200.00
0.00
1200.00
0.00
1200.00
0.00
1200.00
1200.00
1200.00
0.00
0.00
1200.00
1200.00
0.00
0.00
1200.00
1200.00
1200.00
1200.00
1200.00
1200.00
1200.00
1200.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00

P
Kgf
-0.60
-0.59
1.70
0.89
-0.47
-0.46
0.89
0.67
-0.50
-0.51
0.67
-1.40
-0.57
-0.56
-1.39
-0.91
-0.33
-0.33
-0.91
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
503
504
505
506
3
4
5
6
7

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Cold Formed Design 2 - PMM Details - AISI-ASD96, Part 1 of 9

DesignSect
DesignType
Status
Combo
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD

DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD3
DCLD3
DCLD3
DCLD2
DCLD2
DCLD3
DCLD2
DCLD3
DCLD2

U.S ARMY CORPS

OF ENGINEERS

Location
mm
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
1200.00
1200.00
1376.09
1376.09
1376.09
1376.09
1376.09

P
Kgf
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
-20.20
-2.46
12.45
-26.47
-3.16
-5.90
-4.96
-2.98
-3.04

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame
8
9
10
11
12
13
14
15
16
17
18
19
28
30
31
32
33
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Cold Formed Design 2 - PMM Details - AISI-ASD96, Part 1 of 9

DesignSect
DesignType
Status
Combo
STUD
STUD
STUD
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD
STUD
STUD
STUD
STUD
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER

Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Beam
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace

DCLD3
DCLD3
DCLD3
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD3
DCLD3
DCLD3
DCLD3
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2

U.S ARMY CORPS

OF ENGINEERS

Location
mm
1376.09
0.00
0.00
0.00
564.90
1173.17
0.00
1173.17
0.00
1173.17
970.42
202.76
400.00
0.00
688.04
0.00
688.04
0.00
564.90
1173.17
0.00
0.00
0.00
1173.17
970.42
202.76
0.00
564.90
1173.17
0.00
0.00
0.00
1173.17
970.42
202.76
0.00
564.90
1173.17
0.00
0.00
0.00
1173.17
970.42
202.76
0.00
564.90
1173.17
0.00
1173.17
0.00

P
Kgf
-6.04
-124.28
-121.34
-8.219E-02
3.90
3.83
3.67
4.03
3.43
19.93
19.54
44.11
0.00
-125.20
-135.10
-122.45
-131.80
-8.219E-02
9.676E-02
3.657E-02
-0.29
-0.31
-0.27
0.29
0.14
0.56
-8.219E-02
5.042E-02
-4.952E-02
-0.37
-0.37
-0.36
-0.26
-0.26
0.25
-8.219E-02
0.20
7.089E-02
-0.24
-0.24
-0.30
0.14
0.16
0.89
-8.219E-02
3.25
3.67
3.49
3.94
3.99

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame
132
133
134
135
136
137
138

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Cold Formed Design 2 - PMM Details - AISI-ASD96, Part 1 of 9

DesignSect
DesignType
Status
Combo
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER

Brace
Brace
Brace
Brace
Brace
Brace
Brace

No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages

DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2

U.S ARMY CORPS

OF ENGINEERS

Location
mm
1173.17
970.42
202.76
0.00
0.00
0.00
0.00

Table: Cold Formed Design 2 - PMM Details - AISI-ASD96, Part 2 of 9

Frame
54
55
56
57
58
60
61
62
63
64
65
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
240
241
242
243
244
246
247
248

Table: Cold Formed Design 2 - PMM Details - AISI-ASD96, Part 2 of 9

MMajor
MMinor
VMajor
VMinor
Torsion
Kgf-mm
Kgf-mm
Kgf
Kgf
Kgf-mm
-751.34
696.90
-1.61
3.79
2.702E-02
-178.32
993.26
0.96
-4.15
-8.663E-02
-202.73
796.05
-0.98
3.72
-1.983E-02
-177.05
752.88
0.93
-3.70
-1.759E-02
-216.57
759.71
-1.03
3.79
-2.824E-02
-811.27
-63.37
6.33
0.70
-0.34
-1877.93
-53.51
7.69
0.27
3.092E-03
-2612.77
-44.80
7.60
0.15
-1.903E-02
-3718.32
-35.93
8.45
9.163E-02
-0.10
-8100.76
-34.08
15.13
7.486E-02
-3.461E-02
4611.71
1.45
-7.56
2.555E-02
-0.12
628.95
608.69
0.21
0.71
0.13
-141.09
429.29
-0.68
2.42
-5.096E-03
1.58
0.00
9.465E-02
0.00
0.00
-171.19
1510.97
-0.87
5.01
0.11
-171.93
-1477.69
0.86
4.94
8.004E-02
-44.50
162.52
-0.47
1.72
0.00
-811.29
52.88
6.33
-0.60
0.34
-1877.96
42.92
7.69
-0.21
-3.449E-03
-2612.75
36.33
7.60
-0.12
1.864E-02
-3718.26
28.58
8.45
-7.245E-02
0.10
-8101.31
28.93
15.13
-6.514E-02
3.432E-02
4611.70
8.75
-7.56
-4.393E-02
0.12
634.79
-604.37
0.21
-0.70
-0.13
1.58
0.00
9.465E-02
0.00
0.00
-364.72
1516.36
-1.16
5.02
0.11
-180.43
1477.87
0.87
-4.94
-8.013E-02
-44.50
162.52
-0.47
1.72
0.00
-151.45
756.59
-0.91
3.84
1.638E-02
-186.11
1075.84
0.95
-4.29
-4.466E-02
-184.57
748.92
0.95
-3.66
-8.188E-03
-195.23
749.37
0.96
-3.70
-8.802E-03
-197.96
745.04
-1.00
3.74
-1.764E-02
850.52
-7.30
-6.71
0.15
0.24
2008.28
1.72
-9.00
-1.155E-02
6.869E-03
2878.82
-0.18
-9.16
1.758E-03
2.117E-02

Equation

TotalRatio

(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.1.1-2)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.1.1-2)
(C5.2.1-3)
(C5.2.1-3)
(C5.1.1-2)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.1.1-2)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)

P
Kgf
21.74
20.01
31.20
53.01
27.48
40.07
27.97

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
271
272
273
274
275
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Cold Formed Design 2 - PMM Details - AISI-ASD96, Part 2 of 9

MMajor
MMinor
VMajor
VMinor
Torsion
Kgf-mm
Kgf-mm
Kgf
Kgf
Kgf-mm
4155.81
4.686E-02
-10.27
2.319E-04
7.506E-02
8974.40
-0.20
-17.97
9.297E-04
2.985E-02
5262.41
1.95
-9.30
-4.702E-03
-7.632E-02
-84.56
1279.25
-0.53
8.70
-0.11
-1286.51
-5.14
2.70
1.129E-02
9.931E-02
-121.86
347.89
-0.64
2.21
9.620E-04
1.58
0.00
9.465E-02
0.00
0.00
-261.52
1553.69
-1.00
5.10
6.392E-02
-256.94
1520.22
0.99
-5.03
-3.946E-02
-44.50
162.52
-0.47
1.72
0.00
850.54
7.40
-6.71
-0.15
-0.24
2008.30
-1.62
-9.00
1.107E-02
-6.586E-03
2878.81
0.25
-9.16
-1.997E-03
-2.085E-02
4155.78
9.116E-03
-10.27
-3.783E-04
-7.471E-02
8974.77
0.23
-17.97
-9.924E-04
-2.959E-02
5262.46
-1.89
-9.30
4.593E-03
7.699E-02
-1288.55
5.11
2.71
-1.125E-02
-9.974E-02
1.58
0.00
9.465E-02
0.00
0.00
-257.99
1552.88
-1.00
5.10
6.460E-02
-251.40
1519.48
0.99
-5.03
-4.019E-02
-44.50
162.52
-0.47
1.72
0.00
-145.52
737.85
-0.90
3.82
1.669E-02
-186.17
1070.22
0.95
-4.28
-5.178E-02
-184.55
749.30
0.95
-3.66
-1.043E-02
-195.48
753.28
0.96
-3.71
-1.037E-02
-197.62
744.42
-1.00
3.74
-1.904E-02
824.21
-7.80
-6.34
0.16
0.25
-1963.79
1.81
8.65
-1.219E-02
-3.121E-03
2819.19
-0.73
-8.83
3.445E-03
1.823E-02
4068.25
-0.38
-9.91
1.177E-03
7.620E-02
8811.13
-0.62
-17.45
1.744E-03
2.845E-02
-5142.28
1.55
8.98
-3.775E-03
8.606E-02
358.90
1113.98
2.45
7.44
0.11
1417.08
-3.24
-3.00
7.109E-03
-9.631E-02
-121.66
356.42
-0.64
2.23
9.094E-04
1.58
0.00
9.465E-02
0.00
0.00
-259.96
1545.47
-1.00
5.08
7.094E-02
-253.64
1513.57
0.99
-5.02
-4.762E-02
-44.50
162.52
-0.47
1.72
0.00
824.21
7.78
-6.34
-0.16
-0.25
-1963.79
-1.79
8.65
1.209E-02
3.121E-03
2819.19
0.71
-8.83
-3.394E-03
-1.823E-02
4068.25
0.37
-9.91
-1.145E-03
-7.620E-02
8811.13
0.62
-17.45
-1.732E-03
-2.845E-02
-5142.28
-1.54
8.98
3.752E-03
-8.606E-02
1417.10
3.24
-3.00
-7.106E-03
9.631E-02
1.58
0.00
9.465E-02
0.00
0.00
-258.43
1545.47
-1.00
5.08
7.095E-02
-254.88
1513.57
0.99
-5.02
-4.762E-02
-44.50
162.52
-0.47
1.72
0.00

U.S ARMY CORPS

OF ENGINEERS

Equation

TotalRatio

(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.1.1-2)
(C5.2.1-3)
(C5.1.1-2)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.1.1-2)
(C5.2.1-3)
(C5.1.1-2)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)

0.041871
0.088181
0.053671
0.405441
0.016383
0.111482
0.000000
0.080641
0.078699
0.008359
0.009776
0.020829
0.029317
0.041869
0.088190
0.053652
0.016435
0.000000
0.079649
0.078372
0.008359
0.235294
0.340965
0.239459
0.240851
0.237874
0.009433
0.020318
0.028573
0.040710
0.086168
0.051843
0.356620
0.016995
0.114193
0.000000
0.079685
0.078266
0.008359
0.009500
0.020301
0.028579
0.040713
0.086172
0.051828
0.017019
0.000000
0.079847
0.078063
0.008359

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame
302
303
304
305
306
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
333
334
335
336
337
339
340
341
342
343
344
346
347
348
349
350
351
352
353
354
355

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Cold Formed Design 2 - PMM Details - AISI-ASD96, Part 2 of 9

MMajor
MMinor
VMajor
VMinor
Torsion
Kgf-mm
Kgf-mm
Kgf
Kgf
Kgf-mm
-161.74
741.43
-0.92
3.82
1.443E-02
-185.55
1082.35
0.95
-4.30
-4.450E-02
-183.99
754.28
0.95
-3.67
-8.547E-03
-194.93
752.86
0.96
-3.71
-9.180E-03
-198.16
742.92
-1.00
3.74
-1.793E-02
-850.66
-8.71
6.71
0.17
-0.24
-2008.47
0.33
9.00
-4.569E-03
-4.337E-03
-2878.78
-1.27
9.15
5.435E-03
-1.831E-02
-4155.47
-0.80
10.27
2.390E-03
-7.186E-02
-8978.80
-0.91
17.99
2.451E-03
-2.762E-02
-5251.02
1.91
9.27
-5.462E-03
8.286E-02
-119.62
1137.79
-0.82
7.81
0.41
-1526.21
-5.38
3.26
1.181E-02
0.10
-122.15
347.82
-0.64
2.21
5.166E-04
1.58
0.00
9.465E-02
0.00
0.00
-255.84
1551.96
-0.99
5.09
6.361E-02
-253.09
1520.75
0.99
-5.03
-4.080E-02
-44.50
162.52
-0.47
1.72
0.00
-850.64
8.61
6.71
-0.17
0.24
-2008.45
-0.42
9.00
5.045E-03
4.621E-03
-2878.78
1.20
9.15
-5.195E-03
1.863E-02
-4155.49
0.74
10.27
-2.243E-03
7.221E-02
-8978.42
0.87
17.98
-2.388E-03
2.788E-02
-5250.97
-1.97
9.27
5.573E-03
-8.219E-02
-1524.11
5.35
3.26
-1.178E-02
-0.10
1.58
0.00
9.465E-02
0.00
0.00
-263.69
1552.77
-1.01
5.09
6.292E-02
-255.23
1521.51
0.99
-5.03
-4.007E-02
-44.50
162.52
-0.47
1.72
0.00
-912.58
681.16
-1.79
3.76
2.600E-02
-186.11
1002.55
0.99
-4.17
-8.560E-02
-208.01
787.78
-0.98
3.71
-1.903E-02
-178.72
757.70
0.94
-3.71
-1.692E-02
-215.49
756.32
-1.02
3.78
-2.759E-02
-917.65
-59.84
5.39
0.66
-0.33
1878.14
38.37
-7.69
-0.19
-6.176E-03
2612.55
30.07
-7.60
-0.10
1.562E-02
3717.61
24.11
-8.44
-5.965E-02
0.10
8106.85
25.15
-15.15
-5.532E-02
3.189E-02
4700.98
-5.71
-7.80
4.603E-02
-0.12
1187.38
730.45
0.83
0.85
0.15
-139.03
429.56
-0.68
2.43
6.186E-03
1.58
0.00
9.465E-02
0.00
0.00
-182.17
1515.25
-0.88
5.02
0.11
-137.69
-1475.73
0.81
4.94
8.663E-02
-44.50
162.52
-0.47
1.72
0.00
-917.63
49.34
5.39
-0.56
0.33
1878.12
-27.77
-7.69
0.14
5.818E-03
2612.58
-21.59
-7.60
7.216E-02
-1.602E-02
3717.67
-16.75
-8.44
4.046E-02
-0.10

U.S ARMY CORPS

OF ENGINEERS

Equation

TotalRatio

(C5.1.1-2)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.1.1-2)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.1.1-2)
(C5.2.1-3)
(C5.1.1-2)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.1.1-2)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)

0.236409
0.344752
0.240940
0.240621
0.237349
0.009765
0.020781
0.029355
0.041896
0.088299
0.053427
0.361052
0.018998
0.111437
0.000000
0.079848
0.078126
0.008359
0.009836
0.020782
0.029363
0.041900
0.088299
0.053413
0.019009
0.000000
0.080350
0.079071
0.008359
0.218958
0.317904
0.250272
0.240525
0.240507
0.011953
0.021332
0.028390
0.039408
0.080874
0.052834
0.138478
0.136369
0.000000
0.088140
0.077256
0.008359
0.011957
0.020577
0.027789
0.038913

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Cold Formed Design 2 - PMM Details - AISI-ASD96, Part 2 of 9

MMajor
MMinor
VMajor
VMinor
Torsion
Kgf-mm
Kgf-mm
Kgf
Kgf
Kgf-mm
8106.29
-20.00
-15.15
4.557E-02
-3.217E-02
4700.98
15.89
-7.80
-6.435E-02
0.12
1181.22
-725.76
0.83
-0.84
-0.15
1.58
0.00
9.465E-02
0.00
0.00
-362.18
1509.87
-1.16
5.01
0.11
-146.24
1475.54
0.82
-4.94
-8.654E-02
-44.50
162.52
-0.47
1.72
0.00
-203.15
0.00
1.02
0.00
0.00
-203.15
0.00
1.02
0.00
0.00
-203.15
0.00
1.02
0.00
0.00
-203.15
0.00
1.02
0.00
0.00
-203.15
0.00
1.02
0.00
0.00
-203.15
0.00
1.02
0.00
0.00
-203.15
0.00
1.02
0.00
0.00
-203.15
0.00
1.02
0.00
0.00
-457.61
149.12
1.49
-0.26
3.472E-04
-406.80
136.56
1.35
-0.23
1.659E-05
-406.82
136.48
-1.35
0.23
1.353E-05
-457.81
151.23
-1.49
0.27
7.263E-04
-925.39
-5.09
2.34
4.237E-03
9.386E-04
-818.60
-4.13
2.03
7.346E-03
6.254E-06
-818.51
-4.61
-2.03
-8.759E-03
2.974E-05
-924.93
0.93
-2.34
5.671E-03
4.153E-04
-1472.90
23.33
-2.99
4.000E-02
-4.165E-04
-1192.37
31.35
2.64
-5.346E-02
4.591E-05
-1192.51
30.52
-2.64
5.106E-02
-1.922E-05
-1473.77
33.31
2.99
-5.684E-02
-3.851E-04
-2267.40
195.77
-4.18
0.31
-7.292E-04
-1734.58
166.17
3.52
-0.28
6.878E-05
-1734.84
164.88
-3.52
0.27
-3.915E-05
-2268.25
209.65
4.18
-0.33
-1.239E-03
-4500.93
-95.03
-7.53
-0.16
2.969E-03
-3250.04
-77.99
5.97
0.13
-1.204E-04
-3252.33
-78.90
-5.98
-0.13
3.980E-05
-4486.67
-74.79
7.50
0.12
3.206E-03
2802.52
369.16
3.42
0.58
2.925E-02
-2136.97
-274.26
4.14
0.45
4.074E-04
-2145.92
-278.71
-4.16
-0.46
1.051E-03
2770.07
323.84
-3.36
-0.50
5.549E-02
-267.20
464.17
-1.23
0.73
0.22
-522.73
-372.50
-1.43
-0.62
-6.091E-03
-377.61
370.82
1.19
-0.61
5.877E-03
412.46
495.64
-1.108E-02
-0.79
0.27
-828.74
-461.74
2.06
0.81
-0.27
-381.16
369.81
-1.19
0.61
-5.855E-03
-526.40
-373.50
1.44
0.62
6.069E-03
-633.18
389.93
-1.70
0.70
0.33
2771.00
317.76
3.36
0.49
-5.479E-02
-2145.92
-279.39
4.16
0.46
-1.043E-03
-2136.98
-273.58
-4.14
-0.45
-3.997E-04

U.S ARMY CORPS

OF ENGINEERS

Equation

TotalRatio

(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.1.1-2)
(C5.2.1-3)
(C5.2.1-3)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.1.1-2)
(C5.2.1-3)
(C5.2.1-3)
(C5.1.1-2)
(C5.1.1-2)
(C5.2.1-3)
(C5.2.1-3)
(C5.1.1-2)
(C5.1.1-1)
(C5.2.1-3)
(C5.2.1-3)
(C5.1.1-1)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.1.1-1)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.1.1-2)
(C5.1.1-2)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)

0.080736
0.053453
0.130343
0.000000
0.073273
0.087110
0.008359
0.002571
0.002571
0.002571
0.002571
0.002571
0.002571
0.002571
0.002571
0.012081
0.010681
0.010678
0.012186
0.009726
0.008237
0.008251
0.009561
0.014947
0.013106
0.013073
0.015440
0.030822
0.024792
0.024736
0.031504
0.046892
0.034273
0.034338
0.045961
0.045277
0.031409
0.031762
0.042830
0.025815
0.019882
0.021666
0.028052
0.078693
0.046570
0.052651
0.064265
0.042545
0.031792
0.031378

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Cold Formed Design 2 - PMM Details - AISI-ASD96, Part 2 of 9

MMajor
MMinor
VMajor
VMinor
Torsion
Kgf-mm
Kgf-mm
Kgf
Kgf
Kgf-mm
2801.59
375.24
-3.42
-0.59
-2.853E-02
-4484.99
-71.66
-7.50
-0.12
-2.574E-03
-3252.61
-79.11
5.98
0.13
-4.482E-05
-3249.76
-77.78
-5.97
-0.13
1.154E-04
-4502.61
-98.16
7.53
0.16
-2.340E-03
-2268.45
211.73
-4.18
0.34
1.192E-03
-1734.86
164.65
3.52
-0.27
3.991E-05
-1734.56
166.40
-3.52
0.28
-6.802E-05
-2267.19
193.69
4.18
-0.30
6.814E-04
-1472.78
-21.83
-2.99
-3.746E-02
6.126E-04
-1192.35
-31.50
2.64
5.386E-02
-4.786E-05
-1192.54
-30.37
-2.64
-5.065E-02
1.726E-05
-1473.89
-34.82
2.99
5.939E-02
5.813E-04
-925.46
5.99
2.34
-5.701E-03
-1.121E-03
-818.61
4.04
2.03
-7.108E-03
-8.273E-06
-818.50
4.70
-2.03
8.996E-03
-3.175E-05
-924.86
-1.83
-2.34
-7.133E-03
-5.979E-04
-457.59
-148.81
1.49
0.26
-5.075E-04
-406.79
-136.58
1.35
0.23
-1.842E-05
-406.83
-136.46
-1.35
-0.23
-1.535E-05
-457.84
-151.54
-1.49
-0.27
-8.868E-04
-203.15
0.00
1.02
0.00
0.00
-203.15
0.00
1.02
0.00
0.00
-203.15
0.00
1.02
0.00
0.00
-203.15
0.00
1.02
0.00
0.00
-203.15
0.00
1.02
0.00
0.00
-203.15
0.00
1.02
0.00
0.00
-203.15
0.00
1.02
0.00
0.00
-203.15
0.00
1.02
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00

U.S ARMY CORPS

OF ENGINEERS

Equation

TotalRatio

(C5.2.1-3)
(C5.1.1-1)
(C5.2.1-3)
(C5.2.1-3)
(C5.1.1-1)
(C5.1.1-2)
(C5.2.1-3)
(C5.2.1-3)
(C5.1.1-2)
(C5.1.1-1)
(C5.2.1-3)
(C5.2.1-3)
(C5.1.1-1)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)

0.045562
0.045822
0.034349
0.034262
0.047031
0.031607
0.024725
0.024803
0.030719
0.015006
0.012839
0.012802
0.015531
0.009814
0.008269
0.008295
0.009587
0.010771
0.009494
0.009491
0.010883
0.002571
0.002571
0.002571
0.002571
0.002571
0.002571
0.002571
0.002571
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
503
504
505
506
3
4
5

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Cold Formed Design 2 - PMM Details - AISI-ASD96, Part 2 of 9

MMajor
MMinor
VMajor
VMinor
Torsion
Kgf-mm
Kgf-mm
Kgf
Kgf
Kgf-mm
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
-199.66
0.00
-1.00
0.00
0.00
2077.94
6.55
2.41
1.074E-02
1.553E-03
-1606.15
-0.39
-2.67
-4.687E-04
1.524E-05
-2159.53
-0.39
3.44
4.682E-04
-1.539E-05
-1854.27
-6.55
3.23
1.075E-02
1.612E-03
-69.74
1030.33
0.32
-4.26
9.005E-02
-131.94
1024.73
0.45
-4.25
8.833E-02
-113.11
1038.27
0.41
-4.28
8.875E-02

U.S ARMY CORPS

OF ENGINEERS

Equation

TotalRatio

(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.2.1-3)
(C5.2.1-3)
(C5.1.1-1)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)

0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.003245
0.037106
0.017329
0.023627
0.040085
0.052755
0.054809
0.054688

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame
6
7
8
9
10
11
12
13
14
15
16
17
18
19
28
30
31
32
33
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Cold Formed Design 2 - PMM Details - AISI-ASD96, Part 2 of 9

MMajor
MMinor
VMajor
VMinor
Torsion
Kgf-mm
Kgf-mm
Kgf
Kgf
Kgf-mm
-65.70
1037.62
0.31
-4.28
8.894E-02
-67.89
1042.86
0.31
-4.29
9.444E-02
-134.30
1047.20
0.45
-4.30
9.656E-02
6891.08
-916.58
7.36
-4.10
-0.14
6929.66
916.37
7.44
4.10
0.14
-50.00
191.80
-0.49
1.89
0.00
-136.29
429.18
0.68
-2.42
5.104E-03
-211.76
759.38
1.02
-3.79
2.826E-02
-182.18
753.42
-0.94
3.70
1.760E-02
-203.11
795.03
0.98
-3.72
1.985E-02
-186.14
994.35
-0.98
4.16
8.658E-02
-772.21
694.48
1.63
-3.79
-2.688E-02
3816.89
572.18
-3.99
-3.28
-0.11
-25341.69
1425.33
183.75
-8.70
-7.689E-02
-22.57
81.14
0.34
-1.22
0.00
11327.58
-959.67
24.83
-4.15
-0.26
-364.66
-1013.47
1.23
4.23
2.094E-02
11391.44
960.03
24.98
4.15
0.26
-399.60
1013.54
1.22
-4.23
-2.117E-02
-50.00
191.80
-0.49
1.89
0.00
-121.81
347.78
0.64
-2.21
-9.547E-04
-197.92
744.78
1.00
-3.74
1.766E-02
-195.27
749.81
-0.96
3.70
8.813E-03
-184.59
749.63
-0.95
3.67
8.200E-03
-186.17
1076.72
-0.95
4.29
4.463E-02
-151.61
754.60
0.91
-3.84
-1.628E-02
-108.40
747.91
0.75
-3.62
-4.823E-02
-84.56
1273.22
0.54
-8.63
0.11
-50.00
191.80
-0.49
1.89
0.00
-121.67
356.42
0.64
-2.23
-9.094E-04
-197.63
744.42
1.00
-3.74
1.904E-02
-195.47
753.28
-0.96
3.71
1.037E-02
-184.55
749.30
-0.95
3.66
1.043E-02
-186.16
1070.22
-0.95
4.28
5.178E-02
-145.47
737.85
0.90
-3.82
-1.669E-02
-179.91
744.69
0.83
-3.60
-7.189E-02
358.90
1113.98
-2.45
-7.44
-0.11
-50.00
191.80
-0.49
1.89
0.00
-122.10
347.92
0.64
-2.21
-5.239E-04
-198.12
743.18
1.00
-3.74
1.792E-02
-194.97
752.42
-0.96
3.70
9.168E-03
-184.01
753.57
-0.95
3.67
8.536E-03
-185.61
1081.47
-0.95
4.30
4.454E-02
-161.90
743.42
0.92
-3.82
-1.453E-02
-89.32
732.20
0.71
-3.59
-6.787E-02
-119.62
1143.83
0.82
-7.88
-0.41
-50.00
191.80
-0.49
1.89
0.00
-134.22
429.67
0.67
-2.43
-6.194E-03
-210.67
756.65
1.02
-3.78
2.757E-02
-183.85
757.15
-0.94
3.71
1.690E-02

U.S ARMY CORPS

OF ENGINEERS

Equation

TotalRatio

(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.1.1-2)
(C5.1.1-2)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.2.1-3)
(C5.1.1-2)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.1.1-2)
(C5.2.1-3)
(C5.1.1-2)
(C5.1.1-2)
(C5.2.1-3)
(C5.2.1-3)
(C5.2.1-3)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.2.1-3)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)

0.052957
0.053271
0.056012
0.181223
0.187738
0.061308
0.136392
0.241757
0.239552
0.252874
0.315852
0.223951
0.222700
0.750033
0.004161
0.250362
0.128450
0.257782
0.135638
0.061308
0.111452
0.237947
0.239705
0.239522
0.342961
0.240420
0.237815
0.403537
0.061308
0.114192
0.237872
0.240850
0.239458
0.340964
0.235289
0.237858
0.356620
0.061308
0.111472
0.237435
0.240490
0.240723
0.344476
0.237051
0.232604
0.362963
0.061308
0.136686
0.240920
0.240797

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame
130
131
132
133
134
135
136
137
138

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Cold Formed Design 2 - PMM Details - AISI-ASD96, Part 2 of 9

MMajor
MMinor
VMajor
VMinor
Torsion
Kgf-mm
Kgf-mm
Kgf
Kgf
Kgf-mm
-208.37
788.81
0.98
-3.71
1.901E-02
-193.91
1001.46
-1.01
4.17
8.566E-02
-932.89
683.59
1.81
-3.77
-2.614E-02
4611.56
529.88
-4.99
-3.21
-0.14
-25589.38
1475.61
174.44
-8.94
-7.116E-02
-25341.68
1427.03
-183.66
8.74
7.776E-02
3730.44
575.74
3.86
3.29
0.11
-25589.37
1473.90
-174.24
8.89
7.019E-02
4528.75
526.33
4.87
3.20
0.14

U.S ARMY CORPS

OF ENGINEERS

Equation

TotalRatio

(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)
(C5.1.1-2)

0.250991
0.318053
0.222012
0.218944
0.772298
0.748277
0.220719
0.769472
0.214753

Table: Cold Formed Design 2 - PMM Details - AISI-ASD96, Part 3 of 9

Frame
54
55
56
57
58
60
61
62
63
64
65
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
240
241
242
243
244
246

Table: Cold Formed Design 2 - PMM Details - AISI-ASD96, Part 3 of 9

PRatio
MMajRatio
MMinRatio
SRLimit
PDsgn
Kgf
0.000000
0.009210
0.220389
1.000000
27.83
0.000000
0.002186
0.314111
1.000000
4.97
0.000000
0.002485
0.251746
1.000000
5.54
0.000000
0.002170
0.238091
1.000000
5.15
0.000000
0.002655
0.240253
1.000000
5.26
0.001091
0.007700
0.002532
1.000000
-3.32
0.001664
0.017823
0.002138
1.000000
-4.87
0.002149
0.024798
0.001790
1.000000
-5.91
0.002913
0.035291
0.001435
1.000000
-7.33
0.005927
0.076884
0.001361
1.000000
-13.30
0.002862
0.043770
0.000000
1.000000
-5.59
0.093483
0.005991
0.029612
1.000000
-159.53
0.000000
0.001730
0.135761
1.000000
5.22
0.000000
0.000000
0.000000
1.000000
-8.464E-02
0.009799
0.001692
0.073506
1.000000
-13.91
0.018480
0.001697
0.059035
1.000000
-26.23
0.000000
0.000422
0.007906
1.000000
-8.464E-02
0.001086
0.007700
0.002572
1.000000
-3.30
0.001660
0.017824
0.002088
1.000000
-4.86
0.002150
0.024798
0.001767
1.000000
-5.91
0.002904
0.035290
0.001390
1.000000
-7.30
0.005635
0.076890
0.001408
1.000000
-12.65
0.002938
0.043770
0.000426
1.000000
-5.74
0.092006
0.006048
0.024145
1.000000
-157.01
0.000000
0.000000
0.000000
1.000000
-8.464E-02
0.000000
0.003606
0.073768
1.000000
10.57
0.015426
0.001782
0.071896
1.000000
-21.90
0.000000
0.000422
0.007906
1.000000
-8.464E-02
0.000000
0.001857
0.239264
1.000000
0.33
0.000171
0.002281
0.340227
1.000000
-0.27
0.000191
0.002263
0.236840
1.000000
-0.30
0.000181
0.002393
0.236983
1.000000
-0.28
0.000000
0.002427
0.235614
1.000000
4.911E-02
0.001343
0.008072
0.000292
1.000000
-4.08

OF ENGINEERS

Pn0
Kgf
4156.37
4156.37
4156.37
4156.37
4156.37
4156.37
4156.37
2985.13
2985.13
2985.13
2985.13
2985.13
2985.13
2985.13
2985.13
2985.13
4156.37
4156.37
4156.37
4156.37
4156.37
2985.13
2985.13
2985.13
2985.13
2985.13
2985.13
2985.13
2985.13
2985.13
2985.13
2985.13
2985.13
2985.13
2985.13
2985.13
2985.13
2985.13
2985.13
2985.13
2985.13
2985.13
2985.13
2985.13
2985.13
2985.13
2985.13
2985.13
2985.13
2985.13

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame
128
129
130
131
132
133
134
135
136
137
138

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Cold Formed Design 2 - PMM Details - AISI-ASD96, Part 3 of 9

PRatio
MMajRatio
MMinRatio
SRLimit
PDsgn
Kgf
0.000000
0.002583
0.239284
1.000000
3.67
0.000000
0.002254
0.239444
1.000000
3.49
0.000000
0.002554
0.249453
1.000000
3.94
0.000000
0.002377
0.316705
1.000000
3.99
0.000000
0.011436
0.216179
1.000000
21.74
0.000000
0.056531
0.167571
1.000000
20.01
0.000000
0.313691
0.466649
1.000000
31.20
0.000000
0.310654
0.451287
1.000000
53.01
0.000000
0.045730
0.182073
1.000000
27.48
0.000000
0.313691
0.466109
1.000000
40.07
0.000000
0.055516
0.166447
1.000000
27.97

U.S ARMY CORPS

OF ENGINEERS

Pn
Kgf
2101.37
2101.37
2101.37
2101.37
2101.37
2330.56
2950.80
2950.80
2330.56
2950.80
2330.56

Pn0
Kgf
2985.13
2985.13
2985.13
2985.13
2985.13
2985.13
2985.13
2985.13
2985.13
2985.13
2985.13

MnYieldMaj
Kgf-mm
102172.90
102172.90
102172.90
102172.90
102172.90
131966.96
131966.96
131966.96
131966.96
131966.96
131966.96
131966.96
102172.90
131966.96
131966.96
131966.96
131966.96
131966.96
131966.96
131966.96
131966.96
131966.96
131966.96
131966.96
131966.96
131966.96
131966.96
131966.96
102172.90
102172.90
102172.90
102172.90

MnLTBMaj
Kgf-mm
102172.90
102172.90
102172.90
102172.90
102172.90
131966.96
131966.96
131966.96
131966.96
131966.96
131966.96
131488.28
102172.90
131966.96
126727.32
126928.69
131966.96
131966.96
131966.96
131966.96
131966.96
131966.96
131966.96
131461.97
131966.96
126676.44
126784.46
131966.96
102172.90
102172.90
102172.90
102172.90

Table: Cold Formed Design 2 - PMM Details - AISI-ASD96, Part 4 of 9

Frame
54
55
56
57
58
60
61
62
63
64
65
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
240
241
242
243

OF ENGINEERS

MnLTBMaj
Kgf-mm
102172.90
102172.90
102172.90
102172.90
102172.90
102172.90
102172.90
102172.90
102172.90
102172.90
102172.90
102172.90
102172.90

Table: Cold Formed Design 2 - PMM Details - AISI-ASD96, Part 5 of 9

Frame

54
55
56
57
58
60
61
62
63
64
65
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
240
241

Table: Cold Formed Design 2 - PMM Details - AISI-ASD96, Part 5 of 9

MntMaj OmegaBMaj
OmegaByM
CmMajor
CtfMajor
aj
Kgf-mm
Kgf-mm
Kgf-mm
137690.53
1.67
1.67
1.000000
1.000000
137690.53
1.67
1.67
1.000000
1.000000
137690.53
1.67
1.67
1.000000
1.000000
137690.53
1.67
1.67
1.000000
1.000000
137690.53
1.67
1.67
1.000000
1.000000
131966.96
1.67
1.67
0.415604
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
137690.53
1.67
1.67
1.000000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.415620
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
1.000000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
137690.53
1.67
1.67
1.000000
1.000000
137690.53
1.67
1.67
0.850000
1.000000

AlphaMajor

KMajor

1.000000
1.000000
1.000000
1.000000
1.000000
0.999997
0.999981
0.999948
0.999886
0.999676
0.999804
0.992751
1.000000
1.000000
0.999173
0.998440
0.999999
0.999997
0.999981
0.999948
0.999886
0.999692
0.999799
0.992866
1.000000
1.000000
0.998698
0.999999
1.000000
0.999991

1.000000
1.000000
1.000000
1.000000
1.000000
1.765703
1.561697
1.457042
1.394040
1.352281
1.322692
1.304089
1.000000
1.317261
1.000000
1.000000
1.000000
1.765703
1.561697
1.457042
1.394040
1.352281
1.322692
1.304089
1.317261
1.000000
1.000000
1.000000
1.000000
1.000000

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame

242
243
244
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
271
272
273
274
275
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Cold Formed Design 2 - PMM Details - AISI-ASD96, Part 5 of 9

MntMaj OmegaBMaj
OmegaByM
CmMajor
CtfMajor
aj
Kgf-mm
Kgf-mm
Kgf-mm
137690.53
1.67
1.67
0.850000
1.000000
137690.53
1.67
1.67
0.850000
1.000000
137690.53
1.67
1.67
1.000000
1.000000
131966.96
1.67
1.67
0.408206
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
137690.53
1.67
1.67
1.000000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
137690.53
1.67
1.67
1.000000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.408214
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
137690.53
1.67
1.67
0.850000
1.000000
137690.53
1.67
1.67
0.850000
1.000000
137690.53
1.67
1.67
0.850000
1.000000
137690.53
1.67
1.67
0.850000
1.000000
137690.53
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.423637
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
137690.53
1.67
1.67
1.000000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
137690.53
1.67
1.67
1.000000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.423637
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000

U.S ARMY CORPS

OF ENGINEERS

AlphaMajor

KMajor

0.999990
0.999990
1.000000
0.999996
0.999981
0.999952
0.999905
0.999836
0.999751
1.000000
0.999696
1.000000
1.000000
0.999796
0.999819
0.999999
0.999996
0.999981
0.999952
0.999905
0.999836
0.999751
0.999697
1.000000
0.999874
0.999839
0.999999
0.999991
0.999988
0.999988
0.999988
0.999998
0.999996
0.999982
0.999957
0.999918
0.999862
0.999797
1.000000
0.999748
1.000000
1.000000
0.999842
0.999826
0.999999
0.999996
0.999982
0.999957
0.999918
0.999862

1.000000
1.000000
1.000000
1.561697
1.394040
1.322692
1.283759
1.259410
1.242799
1.000000
1.232601
1.000000
1.317261
1.000000
1.000000
1.000000
1.561697
1.394040
1.322692
1.283759
1.259410
1.242799
1.232601
1.317261
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.561697
1.394040
1.322692
1.283759
1.259410
1.242799
1.000000
1.232601
1.000000
1.317261
1.000000
1.000000
1.000000
1.561697
1.394040
1.322692
1.283759
1.259410

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame

295
296
297
298
299
300
302
303
304
305
306
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
333
334
335
336
337
339
340
341
342
343
344
346
347
348
349

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Cold Formed Design 2 - PMM Details - AISI-ASD96, Part 5 of 9

MntMaj OmegaBMaj
OmegaByM
CmMajor
CtfMajor
aj
Kgf-mm
Kgf-mm
Kgf-mm
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
137690.53
1.67
1.67
1.000000
1.000000
137690.53
1.67
1.67
0.850000
1.000000
137690.53
1.67
1.67
0.850000
1.000000
137690.53
1.67
1.67
0.850000
1.000000
137690.53
1.67
1.67
1.000000
1.000000
131966.96
1.67
1.67
0.408274
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
137690.53
1.67
1.67
1.000000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
137690.53
1.67
1.67
1.000000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.408266
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
137690.53
1.67
1.67
1.000000
1.000000
137690.53
1.67
1.67
1.000000
1.000000
137690.53
1.67
1.67
1.000000
1.000000
137690.53
1.67
1.67
1.000000
1.000000
137690.53
1.67
1.67
1.000000
1.000000
131966.96
1.67
1.67
0.562570
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
137690.53
1.67
1.67
1.000000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000

U.S ARMY CORPS

OF ENGINEERS

AlphaMajor

KMajor

0.999797
0.999748
1.000000
0.999827
0.999844
0.999999
1.000000
0.999990
0.999992
0.999992
1.000000
0.999996
0.999981
0.999952
0.999905
0.999833
0.999760
1.000000
0.999689
1.000000
1.000000
0.999851
0.999867
0.999999
0.999996
0.999981
0.999952
0.999905
0.999834
0.999760
0.999690
1.000000
0.999818
0.999792
0.999999
1.000000
1.000000
1.000000
1.000000
1.000000
0.999997
0.999981
0.999949
0.999884
0.999852
0.999452
0.992910
1.000000
1.000000
0.998934

1.242799
1.232601
1.317261
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.561697
1.394040
1.322692
1.283759
1.259410
1.242799
1.000000
1.232601
1.000000
1.317261
1.000000
1.000000
1.000000
1.561697
1.394040
1.322692
1.283759
1.259410
1.242799
1.232601
1.317261
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.765703
1.561697
1.457042
1.394040
1.352281
1.322692
1.304089
1.000000
1.317261
1.000000

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame

350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Cold Formed Design 2 - PMM Details - AISI-ASD96, Part 5 of 9

MntMaj OmegaBMaj
OmegaByM
CmMajor
CtfMajor
aj
Kgf-mm
Kgf-mm
Kgf-mm
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.562560
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
1.000000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
1.000000
1.000000
131966.96
1.67
1.67
1.000000
1.000000
131966.96
1.67
1.67
1.000000
1.000000
131966.96
1.67
1.67
1.000000
1.000000
131966.96
1.67
1.67
1.000000
1.000000
131966.96
1.67
1.67
1.000000
1.000000
131966.96
1.67
1.67
1.000000
1.000000
131966.96
1.67
1.67
1.000000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
1.000000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
1.000000
1.000000
131966.96
1.67
1.67
1.000000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
1.000000
1.000000
131966.96
1.67
1.67
1.000000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
1.000000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
1.000000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000

U.S ARMY CORPS

OF ENGINEERS

AlphaMajor

KMajor

0.998569
0.999999
0.999997
0.999981
0.999949
0.999884
0.999836
0.999447
0.993029
1.000000
1.000000
0.998827
0.999999
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
0.999966
0.999987
0.999987
0.999966
0.999947
0.999978
0.999979
0.999948
1.000000
0.999981
0.999981
1.000000
1.000000
0.999983
0.999982
1.000000
1.000000
0.999978
0.999977
1.000000
0.999956
0.999988
0.999981
0.999951
0.999951
1.000000
0.999997
0.999998
0.999997

1.000000
1.000000
1.765703
1.561697
1.457042
1.394040
1.352281
1.322692
1.304089
1.317261
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame

400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Cold Formed Design 2 - PMM Details - AISI-ASD96, Part 5 of 9

MntMaj OmegaBMaj
OmegaByM
CmMajor
CtfMajor
aj
Kgf-mm
Kgf-mm
Kgf-mm
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
1.000000
1.000000
131966.96
1.67
1.67
1.000000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
1.000000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
1.000000
1.000000
131966.96
1.67
1.67
1.000000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
1.000000
1.000000
131966.96
1.67
1.67
1.000000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
1.000000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
1.000000
1.000000
131966.96
1.67
1.67
1.000000
1.000000
131966.96
1.67
1.67
1.000000
1.000000
131966.96
1.67
1.67
1.000000
1.000000
131966.96
1.67
1.67
1.000000
1.000000
131966.96
1.67
1.67
1.000000
1.000000
131966.96
1.67
1.67
1.000000
1.000000
131966.96
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000

U.S ARMY CORPS

OF ENGINEERS

AlphaMajor

KMajor

0.999994
1.000000
1.000000
0.999951
0.999981
0.999988
0.999956
1.000000
0.999977
0.999978
1.000000
1.000000
0.999982
0.999983
1.000000
1.000000
0.999981
0.999981
1.000000
0.999947
0.999978
0.999979
0.999948
0.999966
0.999987
0.999987
0.999966
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000

1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame

450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
503

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Cold Formed Design 2 - PMM Details - AISI-ASD96, Part 5 of 9

MntMaj OmegaBMaj
OmegaByM
CmMajor
CtfMajor
aj
Kgf-mm
Kgf-mm
Kgf-mm
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
140327.04
1.67
1.67
1.000000
1.000000
131966.96
1.67
1.67
1.000000
1.000000

U.S ARMY CORPS

OF ENGINEERS

AlphaMajor

KMajor

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame

504
505
506
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
28
30
31
32
33
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Cold Formed Design 2 - PMM Details - AISI-ASD96, Part 5 of 9

MntMaj OmegaBMaj
OmegaByM
CmMajor
CtfMajor
aj
Kgf-mm
Kgf-mm
Kgf-mm
131966.96
1.67
1.67
1.000000
1.000000
131966.96
1.67
1.67
1.000000
1.000000
131966.96
1.67
1.67
1.000000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.850000
1.000000
137690.53
1.67
1.67
0.850000
1.000000
137690.53
1.67
1.67
1.000000
1.000000
137690.53
1.67
1.67
1.000000
1.000000
137690.53
1.67
1.67
1.000000
1.000000
137690.53
1.67
1.67
1.000000
1.000000
137690.53
1.67
1.67
1.000000
1.000000
137690.53
1.67
1.67
1.000000
1.000000
137690.53
1.67
1.67
1.000000
1.000000
137690.53
1.67
1.67
1.000000
1.000000
131966.96
1.67
1.67
1.000000
1.000000
131966.96
1.67
1.67
0.392689
1.000000
131966.96
1.67
1.67
0.850000
1.000000
131966.96
1.67
1.67
0.392333
1.000000
131966.96
1.67
1.67
0.850000
1.000000
137690.53
1.67
1.67
0.850000
1.000000
137690.53
1.67
1.67
1.000000
1.000000
137690.53
1.67
1.67
1.000000
1.000000
137690.53
1.67
1.67
0.850000
1.000000
137690.53
1.67
1.67
0.850000
1.000000
137690.53
1.67
1.67
0.850000
1.000000
137690.53
1.67
1.67
1.000000
1.000000
137690.53
1.67
1.67
1.000000
1.000000
137690.53
1.67
1.67
1.000000
1.000000
137690.53
1.67
1.67
0.850000
1.000000
137690.53
1.67
1.67
1.000000
1.000000
137690.53
1.67
1.67
0.850000
1.000000
137690.53
1.67
1.67
0.850000
1.000000
137690.53
1.67
1.67
0.850000
1.000000
137690.53
1.67
1.67
0.850000
1.000000
137690.53
1.67
1.67
0.850000
1.000000
137690.53
1.67
1.67
0.850000
1.000000
137690.53
1.67
1.67
1.000000
1.000000
137690.53
1.67
1.67
0.850000
1.000000
137690.53
1.67
1.67
1.000000
1.000000
137690.53
1.67
1.67
1.000000
1.000000
137690.53
1.67
1.67
0.850000
1.000000
137690.53
1.67
1.67
0.850000
1.000000
137690.53
1.67
1.67
0.850000
1.000000
137690.53
1.67
1.67
1.000000
1.000000

U.S ARMY CORPS

OF ENGINEERS

AlphaMajor

KMajor

0.998511
1.000000
0.984014
0.999843
0.999707
0.999754
0.999852
0.999849
0.999700
0.993832
0.993978
0.999999
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
0.998447
0.998324
0.998481
0.998365
0.999999
1.000000
1.000000
0.999990
0.999990
0.999991
1.000000
1.000000
1.000000
0.999999
1.000000
0.999998
0.999988
0.999988
0.999988
0.999991
0.999994
1.000000
0.999999
1.000000
1.000000
0.999992
0.999992
0.999990
1.000000

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame

124
125
126
127
128
129
130
131
132
133
134
135
136
137
138

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Cold Formed Design 2 - PMM Details - AISI-ASD96, Part 5 of 9

MntMaj OmegaBMaj
OmegaByM
CmMajor
CtfMajor
aj
Kgf-mm
Kgf-mm
Kgf-mm
137690.53
1.67
1.67
1.000000
1.000000
137690.53
1.67
1.67
1.000000
1.000000
137690.53
1.67
1.67
0.850000
1.000000
137690.53
1.67
1.67
1.000000
1.000000
137690.53
1.67
1.67
1.000000
1.000000
137690.53
1.67
1.67
1.000000
1.000000
137690.53
1.67
1.67
1.000000
1.000000
137690.53
1.67
1.67
1.000000
1.000000
137690.53
1.67
1.67
1.000000
1.000000
137690.53
1.67
1.67
1.000000
1.000000
137690.53
1.67
1.67
1.000000
1.000000
137690.53
1.67
1.67
1.000000
1.000000
137690.53
1.67
1.67
1.000000
1.000000
137690.53
1.67
1.67
1.000000
1.000000
137690.53
1.67
1.67
1.000000
1.000000

U.S ARMY CORPS

OF ENGINEERS

AlphaMajor

KMajor

1.000000
1.000000
0.999999
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000

1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000

MnLTBMin
Kgf-mm
3960.58
3960.58
3960.58
3960.58
3960.58
46948.44
46948.44
46948.44
46948.44
46948.44
25745.94
25745.94
3960.58
25745.94
25745.94
46948.44
25745.94
25745.94
25745.94
25745.94
25745.94
25745.94
25745.94
46948.44
25745.94
25745.94
25745.94
25745.94

MntMin
Kgf-mm
74326.20
74326.20
74326.20
74326.20
74326.20
31760.71
31760.71
31760.71
31760.71
31760.71
64087.46
64087.46
74326.20
64087.46
64087.46
31760.71
64087.46
64087.46
64087.46
64087.46
64087.46
64087.46
64087.46
31760.71
64087.46
64087.46
64087.46
64087.46

Table: Cold Formed Design 2 - PMM Details - AISI-ASD96, Part 6 of 9

Frame
54
55
56
57
58
60
61
62
63
64
65
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83

OF ENGINEERS

MntMin
Kgf-mm
74326.20
74326.20
74326.20
74326.20
74326.20
74326.20
74326.20
74326.20
74326.20
74326.20
74326.20
74326.20
74326.20
74326.20
74326.20
74326.20
74326.20

Table: Cold Formed Design 2 - PMM Details - AISI-ASD96, Part 7 of 9

Frame

54
55
56
57
58
60
61
62
63
64
65
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81

Table: Cold Formed Design 2 - PMM Details - AISI-ASD96, Part 7 of 9

LFactMinor

1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
0.518487
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000

Kgf/mm2
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame

82
83
240
241
242
243
244
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
271
272
273
274
275
277
278
279
280
281
282
283
284
285
286
287
288
289
290

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Cold Formed Design 2 - PMM Details - AISI-ASD96, Part 7 of 9

OmegaBMin OmegaByMi
CmMinor
AlphaMinor
KMinor
n
Kgf-mm
Kgf-mm
1.67
1.67
0.850000
0.986993
1.000000
1.67
1.67
0.850000
0.999993
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
0.850000
0.999916
1.000000
1.67
1.67
0.850000
0.999906
1.000000
1.67
1.67
0.850000
0.999911
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
0.469084
0.999960
1.000000
1.67
1.67
0.348840
0.999806
1.000000
1.67
1.67
0.512744
0.999523
1.000000
1.67
1.67
0.683033
0.999049
1.000000
1.67
1.67
0.485788
0.998363
1.000000
1.67
1.67
0.376477
0.997515
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
0.388259
0.996963
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
1.000000
1.000000
1.317261
1.67
1.67
0.850000
0.997961
1.000000
1.67
1.67
0.850000
0.998193
1.000000
1.67
1.67
0.850000
0.999993
1.000000
1.67
1.67
0.467862
0.999960
1.000000
1.67
1.67
0.354714
0.999806
1.000000
1.67
1.67
0.487700
0.999523
1.000000
1.67
1.67
1.000000
0.999049
1.000000
1.67
1.67
0.471785
0.998361
1.000000
1.67
1.67
0.379117
0.997515
1.000000
1.67
1.67
0.389294
0.996972
1.000000
1.67
1.67
1.000000
1.000000
1.317261
1.67
1.67
0.850000
0.998738
1.000000
1.67
1.67
0.850000
0.998396
1.000000
1.67
1.67
0.850000
0.999993
1.000000
1.67
1.67
0.850000
0.999915
1.000000
1.67
1.67
0.850000
0.999885
1.000000
1.67
1.67
0.850000
0.999884
1.000000
1.67
1.67
0.850000
0.999883
1.000000
1.67
1.67
0.850000
0.999983
1.000000
1.67
1.67
0.462398
0.999962
1.000000
1.67
1.67
0.349293
0.999819
1.000000
1.67
1.67
0.370216
0.999570
1.000000
1.67
1.67
0.314120
0.999184
1.000000
1.67
1.67
0.364180
0.998625
1.000000
1.67
1.67
0.379469
0.997973
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
0.387798
0.997484
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
1.000000
1.000000
1.317261
1.67
1.67
0.850000
0.998418
1.000000
1.67
1.67
0.850000
0.998260
1.000000
1.67
1.67
0.850000
0.999993
1.000000
1.67
1.67
0.462654
0.999962
1.000000

U.S ARMY CORPS

OF ENGINEERS

LFactMinor

1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
0.827171
1.000000
0.518487
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
0.827171
1.000000
0.518487
1.000000
1.000000
1.000000
1.000000
1.000000

Kgf/mm2
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201
23.201

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame

291
292
293
294
295
296
297
298
299
300
302
303
304
305
306
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
333
334
335
336
337
339
340
341
342
343
344

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Cold Formed Design 2 - PMM Details - AISI-ASD96, Part 7 of 9

OmegaBMin OmegaByMi
CmMinor
AlphaMinor
KMinor
n
Kgf-mm
Kgf-mm
1.67
1.67
0.350479
0.999819
1.000000
1.67
1.67
0.372454
0.999570
1.000000
1.67
1.67
0.316537
0.999184
1.000000
1.67
1.67
0.365453
0.998626
1.000000
1.67
1.67
0.380082
0.997973
1.000000
1.67
1.67
0.388089
0.997487
1.000000
1.67
1.67
1.000000
1.000000
1.317261
1.67
1.67
0.850000
0.998270
1.000000
1.67
1.67
0.850000
0.998440
1.000000
1.67
1.67
0.850000
0.999993
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
0.850000
0.999906
1.000000
1.67
1.67
0.850000
0.999926
1.000000
1.67
1.67
0.850000
0.999928
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
0.452170
0.999960
1.000000
1.67
1.67
0.508893
0.999806
1.000000
1.67
1.67
0.329228
0.999523
1.000000
1.67
1.67
0.294159
0.999050
1.000000
1.67
1.67
0.350396
0.998337
1.000000
1.67
1.67
0.427157
0.997606
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
0.388561
0.996891
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
1.000000
1.000000
1.317261
1.67
1.67
0.850000
0.998515
1.000000
1.67
1.67
0.850000
0.998667
1.000000
1.67
1.67
0.850000
0.999993
1.000000
1.67
1.67
0.453276
0.999960
1.000000
1.67
1.67
0.489351
0.999806
1.000000
1.67
1.67
0.334897
0.999523
1.000000
1.67
1.67
0.299197
0.999050
1.000000
1.67
1.67
0.354926
0.998338
1.000000
1.67
1.67
0.424375
0.997607
1.000000
1.67
1.67
0.389552
0.996901
1.000000
1.67
1.67
1.000000
1.000000
1.317261
1.67
1.67
0.850000
0.998185
1.000000
1.67
1.67
0.850000
0.997919
1.000000
1.67
1.67
0.850000
0.999993
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
0.249801
0.999975
1.000000
1.67
1.67
0.216735
0.999813
1.000000
1.67
1.67
0.225226
0.999487
1.000000
1.67
1.67
0.236531
0.998844
1.000000
1.67
1.67
0.243132
0.998520
1.000000
1.67
1.67
0.551956
0.994532
1.000000

U.S ARMY CORPS

OF ENGINEERS

LFactMinor

1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
0.827171
1.000000
0.518487
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame

346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Cold Formed Design 2 - PMM Details - AISI-ASD96, Part 7 of 9

OmegaBMin OmegaByMi
CmMinor
AlphaMinor
KMinor
n
Kgf-mm
Kgf-mm
1.67
1.67
0.389670
0.929191
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
1.000000
1.000000
1.317261
1.67
1.67
0.850000
0.989358
1.000000
1.67
1.67
0.850000
0.985707
1.000000
1.67
1.67
0.850000
0.999993
1.000000
1.67
1.67
0.265539
0.999975
1.000000
1.67
1.67
0.213625
0.999813
1.000000
1.67
1.67
0.226407
0.999487
1.000000
1.67
1.67
0.254620
0.998840
1.000000
1.67
1.67
0.265915
0.998361
1.000000
1.67
1.67
0.491444
0.994482
1.000000
1.67
1.67
0.392454
0.930379
1.000000
1.67
1.67
1.000000
1.000000
1.317261
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
0.850000
0.988285
1.000000
1.67
1.67
0.850000
0.999993
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
0.240931
0.999657
1.000000
1.67
1.67
0.204663
0.999874
1.000000
1.67
1.67
0.205118
0.999874
1.000000
1.67
1.67
0.240405
0.999656
1.000000
1.67
1.67
1.000000
0.999474
1.000000
1.67
1.67
0.247313
0.999785
1.000000
1.67
1.67
0.286932
0.999788
1.000000
1.67
1.67
0.536294
0.999476
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
0.217708
0.999812
1.000000
1.67
1.67
0.202872
0.999808
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
0.202650
0.999825
1.000000
1.67
1.67
0.207153
0.999823
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
0.202732
0.999779
1.000000
1.67
1.67
0.205277
0.999774
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
0.250867
0.999556
1.000000
1.67
1.67
0.214534
0.999879
1.000000
1.67
1.67
0.206167
0.999815
1.000000
1.67
1.67
0.256798
0.999511
1.000000
1.67
1.67
0.247239
0.999513
1.000000

U.S ARMY CORPS

OF ENGINEERS

LFactMinor

1.000000
0.518487
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame

396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Cold Formed Design 2 - PMM Details - AISI-ASD96, Part 7 of 9

OmegaBMin OmegaByMi
CmMinor
AlphaMinor
KMinor
n
Kgf-mm
Kgf-mm
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
0.204406
0.999970
1.000000
1.67
1.67
0.235843
0.999982
1.000000
1.67
1.67
1.000000
0.999548
1.000000
1.67
1.67
1.000000
0.999029
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
0.258113
0.999509
1.000000
1.67
1.67
0.205084
0.999812
1.000000
1.67
1.67
0.215659
0.999882
1.000000
1.67
1.67
0.249852
0.999557
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
0.206449
0.999774
1.000000
1.67
1.67
0.203984
0.999779
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
0.207804
0.999822
1.000000
1.67
1.67
0.202014
0.999826
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
0.219682
0.999812
1.000000
1.67
1.67
0.200557
0.999808
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
0.542877
0.999474
1.000000
1.67
1.67
0.240022
0.999785
1.000000
1.67
1.67
0.291031
0.999788
1.000000
1.67
1.67
0.491550
0.999476
1.000000
1.67
1.67
0.241011
0.999657
1.000000
1.67
1.67
0.204596
0.999874
1.000000
1.67
1.67
0.205185
0.999874
1.000000
1.67
1.67
0.240328
0.999656
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
1.000000
1.000000
1.000000
1.67
1.67
1.000000
1.000000
1.000000

U.S ARMY CORPS

OF ENGINEERS

OF ENGINEERS

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Cold Formed Design 2 - PMM Details - AISI-ASD96, Part 8 of 9

U.S ARMY CORPS

OF ENGINEERS

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame
494
495
496
497
498
503
504
505
506
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
28
30
31
32
33
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Cold Formed Design 2 - PMM Details - AISI-ASD96, Part 8 of 9

E
Length MajAxisAng
RLLF
SectClass
Kgf/mm2
mm
Degrees
20389.019
1200.00
1.000000
Slender
20389.019
1200.00
1.000000
Slender
20389.019
1200.00
1.000000
Slender
20389.019
1200.00
1.000000
Slender
20389.019
1200.00
1.000000
Slender
20389.019
1200.00
1.000000
Slender
20389.019
1200.00
1.000000
Slender
20389.019
1200.00
1.000000
Slender
20389.019
1200.00
1.000000
Slender
20389.019
1376.09
1.000000
Slender
20389.019
1376.09
1.000000
Slender
20389.019
1376.09
1.000000
Slender
20389.019
1376.09
1.000000
Slender
20389.019
1376.09
1.000000
Slender
20389.019
1376.09
1.000000
Slender
20389.019
1376.09
1.000000
Slender
20389.019
1376.09
1.000000
Slender
20389.019
608.28
1.000000
Slender
20389.019
564.90
1.000000
Slender
20389.019
1173.17
1.000000
Slender
20389.019
1173.17
1.000000
Slender
20389.019
1173.17
1.000000
Slender
20389.019
1173.17
1.000000
Slender
20389.019
1173.17
1.000000
Slender
20389.019
970.42
1.000000
Slender
20389.019
202.76
1.000000
Slender
20389.019
400.00
1.000000
Slender
20389.019
688.04
1.000000
Slender
20389.019
688.04
1.000000
Slender
20389.019
688.04
1.000000
Slender
20389.019
688.04
1.000000
Slender
20389.019
608.28
1.000000
Slender
20389.019
564.90
1.000000
Slender
20389.019
1173.17
1.000000
Slender
20389.019
1173.17
1.000000
Slender
20389.019
1173.17
1.000000
Slender
20389.019
1173.17
1.000000
Slender
20389.019
1173.17
1.000000
Slender
20389.019
970.42
1.000000
Slender
20389.019
202.76
1.000000
Slender
20389.019
608.28
1.000000
Slender
20389.019
564.90
1.000000
Slender
20389.019
1173.17
1.000000
Slender
20389.019
1173.17
1.000000
Slender
20389.019
1173.17
1.000000
Slender
20389.019
1173.17
1.000000
Slender
20389.019
1173.17
1.000000
Slender
20389.019
970.42
1.000000
Slender
20389.019
202.76
1.000000
Slender
20389.019
608.28
1.000000
Slender

U.S ARMY CORPS

OF ENGINEERS

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Cold Formed Design 2 - PMM Details - AISI-ASD96, Part 8 of 9

E
Length MajAxisAng
RLLF
SectClass
Kgf/mm2
mm
Degrees
20389.019
564.90
1.000000
Slender
20389.019
1173.17
1.000000
Slender
20389.019
1173.17
1.000000
Slender
20389.019
1173.17
1.000000
Slender
20389.019
1173.17
1.000000
Slender
20389.019
1173.17
1.000000
Slender
20389.019
970.42
1.000000
Slender
20389.019
202.76
1.000000
Slender
20389.019
608.28
1.000000
Slender
20389.019
564.90
1.000000
Slender
20389.019
1173.17
1.000000
Slender
20389.019
1173.17
1.000000
Slender
20389.019
1173.17
1.000000
Slender
20389.019
1173.17
1.000000
Slender
20389.019
1173.17
1.000000
Slender
20389.019
970.42
1.000000
Slender
20389.019
202.76
1.000000
Slender
20389.019
202.76
1.000000
Slender
20389.019
970.42
1.000000
Slender
20389.019
202.76
1.000000
Slender
20389.019
970.42
1.000000
Slender

Table: Cold Formed Design 2 - PMM Details - AISI-ASD96, Part 9 of 9

Frame
54
55
56
57
58
60
61
62
63
64
65
67
68
69
70
71
72
73
74
75
76
77

Table: Cold Formed Design 2 - PMM Details - AISI-ASD96, Part 9 of 9

U.S ARMY CORPS

OF ENGINEERS

FramingType
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame
78
79
80
81
82
83
240
241
242
243
244
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
271
272
273
274
275
277
278
279
280
281
282
283
284
285
286

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Cold Formed Design 2 - PMM Details - AISI-ASD96, Part 9 of 9

ErrMsg
WarnMsg
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages

No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
kl/r > 200
kl/r > 200
l/r > 300
l/r > 300
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages

OF ENGINEERS

Table: Cold Formed Design 2 - PMM Details - AISI-ASD96, Part 9 of 9

Table: Cold Formed Design 3 - Shear Details - AISI-ASD96, Part 1 of 4

Frame
54
55
56
57
58
60
61
62
63
64
65
67
68
69
70
71
72
73
74
75

Table: Cold Formed Design 3 - Shear Details - AISI-ASD96, Part 1 of 4

DesignSect
DesignType
Status
VMajorCombo
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD RAFTER
STUD
STUD
STUD
STUD
STUD
STUD
STUD

Brace
Brace
Brace
Brace
Brace
Column
Column
Column
Column
Column
Column
Column
Brace
Column
Brace
Brace
Brace
Column
Column
Column

DCLD3
DCLD1
DCLD1
DCLD1
DCLD1
DCLD3
DCLD3
DCLD3
DCLD3
DCLD3
DCLD3
DCLD3
DCLD1
DCLD2
DCLD1
DCLD1
DCLD1
DCLD3
DCLD3
DCLD3

VMajorLoc
mm
1173.17
0.00
1173.17
1173.17
0.00
192.86
385.71
578.57
771.43
964.29
1157.14
1316.67
0.00
0.00
0.00
0.00
0.00
192.86
385.71
578.57

VMajorRatio
0.001525
0.000973
0.000972
0.000984
0.001008
0.004831
0.005869
0.005804
0.006449
0.011550
0.005987
0.002061
0.000652
0.000000
0.001039
0.001010
0.000480
0.004831
0.005869
0.005804

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame
76
77
78
79
80
81
82
83
240
241
242
243
244
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
271
272
273
274
275
277
278
279
280
281
282
283
284

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Cold Formed Design 3 - Shear Details - AISI-ASD96, Part 1 of 4

DesignSect
DesignType
Status
VMajorCombo
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD
STUD
STUD
STUD
STUD
STUD
STUD RAFTER
STUD
STUD RAFTER
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD
STUD
STUD
STUD
STUD
STUD
STUD RAFTER
STUD

Column
Column
Column
Column
Column
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Column
Column
Column
Column
Column
Column
Brace
Column
Brace
Column
Brace
Brace
Brace
Column
Column
Column
Column
Column
Column
Column
Column
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Column
Column
Column
Column
Column
Column
Brace
Column

DCLD3
DCLD3
DCLD3
DCLD3
DCLD2
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD3
DCLD2
DCLD1
DCLD2
DCLD1
DCLD1
DCLD1
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD3
DCLD3
DCLD3
DCLD3
DCLD3
DCLD2
DCLD2
DCLD2

U.S ARMY CORPS

OF ENGINEERS

VMajorLoc
mm
771.43
964.29
1157.14
1316.67
0.00
0.00
0.00
0.00
1173.17
0.00
0.00
1173.17
0.00
192.86
385.71
578.57
771.43
964.29
1157.14
202.76
1316.67
0.00
0.00
0.00
1506.32
0.00
192.86
385.71
578.57
771.43
964.29
1157.14
1316.67
0.00
0.00
1506.32
0.00
1173.17
0.00
0.00
1173.17
0.00
192.86
385.71
578.57
771.43
964.29
1157.14
202.76
1316.67

VMajorRatio
0.006449
0.011552
0.005987
0.002066
0.000000
0.001039
0.001010
0.000480
0.001013
0.000970
0.000969
0.000979
0.001015
0.005120
0.006870
0.006989
0.007839
0.013720
0.007097
0.003044
0.002162
0.000651
0.000000
0.001018
0.001006
0.000480
0.005121
0.006870
0.006989
0.007839
0.013720
0.007097
0.002165
0.000000
0.001018
0.001006
0.000480
0.001009
0.000970
0.000969
0.000978
0.001015
0.004841
0.006606
0.006744
0.007569
0.013321
0.006855
0.002121
0.002291

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
302
303
304
305
306
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
333
334
335
336
337

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Cold Formed Design 3 - Shear Details - AISI-ASD96, Part 1 of 4

DesignSect
DesignType
Status
VMajorCombo
STUD RAFTER
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD
STUD
STUD
STUD
STUD
STUD
STUD RAFTER
STUD
STUD RAFTER
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER

Brace
Column
Brace
Brace
Brace
Column
Column
Column
Column
Column
Column
Column
Column
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Column
Column
Column
Column
Column
Column
Brace
Column
Brace
Column
Brace
Brace
Brace
Column
Column
Column
Column
Column
Column
Column
Column
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace

DCLD1
DCLD2
DCLD1
DCLD1
DCLD1
DCLD3
DCLD3
DCLD3
DCLD3
DCLD3
DCLD2
DCLD2
DCLD2
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD3
DCLD3
DCLD3
DCLD3
DCLD3
DCLD3
DCLD3
DCLD3
DCLD1
DCLD2
DCLD1
DCLD1
DCLD1
DCLD3
DCLD3
DCLD3
DCLD3
DCLD3
DCLD3
DCLD3
DCLD2
DCLD1
DCLD1
DCLD1
DCLD3
DCLD1
DCLD1
DCLD1
DCLD1

U.S ARMY CORPS

OF ENGINEERS

VMajorLoc
mm
0.00
0.00
0.00
1506.32
0.00
192.86
385.71
578.57
771.43
964.29
1157.14
1316.67
0.00
0.00
1506.32
0.00
1173.17
0.00
0.00
1173.17
0.00
192.86
385.71
578.57
771.43
964.29
1157.14
202.76
1316.67
0.00
0.00
0.00
1506.32
0.00
192.86
385.71
578.57
771.43
964.29
1157.14
1316.67
0.00
0.00
1506.32
0.00
1173.17
0.00
1173.17
1173.17
0.00

VMajorRatio
0.000652
0.000000
0.001017
0.001007
0.000480
0.004841
0.006606
0.006744
0.007569
0.013321
0.006855
0.002291
0.000000
0.001017
0.001007
0.000480
0.001013
0.000970
0.000969
0.000979
0.001015
0.005121
0.006870
0.006989
0.007837
0.013730
0.007073
0.003290
0.002492
0.000651
0.000000
0.001018
0.001006
0.000480
0.005121
0.006870
0.006989
0.007838
0.013729
0.007073
0.002489
0.000000
0.001018
0.001006
0.000480
0.001776
0.000980
0.000974
0.000984
0.001007

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame
339
340
341
342
343
344
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Cold Formed Design 3 - Shear Details - AISI-ASD96, Part 1 of 4

DesignSect
DesignType
Status
VMajorCombo
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD RAFTER
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD

Column
Column
Column
Column
Column
Column
Column
Brace
Column
Brace
Brace
Brace
Column
Column
Column
Column
Column
Column
Column
Column
Brace
Brace
Brace
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam

DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD1
DCLD2
DCLD1
DCLD1
DCLD1
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD2
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD2
DCLD1
DCLD1
DCLD3
DCLD3
DCLD2
DCLD3
DCLD2
DCLD2
DCLD3
DCLD2
DCLD3
DCLD2
DCLD3
DCLD2
DCLD3
DCLD3
DCLD2
DCLD3

U.S ARMY CORPS

OF ENGINEERS

VMajorLoc
mm
192.86
385.71
578.57
771.43
964.29
1157.14
1316.67
0.00
0.00
0.00
0.00
0.00
192.86
385.71
578.57
771.43
964.29
1157.14
1316.67
0.00
0.00
0.00
0.00
1200.00
1200.00
1200.00
1200.00
1200.00
1200.00
1200.00
1200.00
1200.00
0.00
1200.00
0.00
1200.00
0.00
1200.00
0.00
1200.00
0.00
1200.00
0.00
1200.00
0.00
1200.00
0.00
1200.00
0.00
1200.00

VMajorRatio
0.004831
0.005869
0.005802
0.006446
0.011566
0.005951
0.002606
0.000652
0.000000
0.001047
0.001017
0.000480
0.004831
0.005869
0.005803
0.006447
0.011564
0.005951
0.002600
0.000000
0.001047
0.001017
0.000480
0.001034
0.001034
0.001034
0.001034
0.001034
0.001034
0.001034
0.001034
0.001139
0.001036
0.001036
0.001139
0.001790
0.001557
0.001557
0.001789
0.002407
0.002027
0.002027
0.002409
0.003327
0.002702
0.002703
0.003328
0.005896
0.004583
0.004588

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Cold Formed Design 3 - Shear Details - AISI-ASD96, Part 1 of 4

DesignSect
DesignType
Status
VMajorCombo
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
TRACK
TRACK
TRACK
TRACK
TRACK

DCLD2
DCLD2
DCLD3
DCLD2
DCLD3
DCLD3
DCLD1
DCLD1
DCLD3
DCLD3
DCLD1
DCLD1
DCLD3
DCLD3
DCLD2
DCLD3
DCLD2
DCLD2
DCLD3
DCLD2
DCLD3
DCLD3
DCLD2
DCLD3
DCLD2
DCLD2
DCLD3
DCLD2
DCLD3
DCLD3
DCLD2
DCLD3
DCLD2
DCLD2
DCLD1
DCLD1
DCLD3
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1

U.S ARMY CORPS

OF ENGINEERS

VMajorLoc
mm
0.00
1200.00
0.00
1200.00
0.00
1200.00
0.00
1200.00
0.00
1200.00
0.00
1200.00
0.00
1200.00
0.00
1200.00
0.00
1200.00
0.00
1200.00
0.00
1200.00
0.00
1200.00
0.00
1200.00
0.00
1200.00
0.00
1200.00
0.00
1200.00
0.00
1200.00
0.00
1200.00
0.00
1200.00
1200.00
1200.00
1200.00
1200.00
1200.00
1200.00
1200.00
0.00
0.00
0.00
0.00
0.00

VMajorRatio
0.005876
0.004163
0.003180
0.003199
0.004116
0.001289
0.001102
0.001097
0.001559
0.001570
0.001097
0.001102
0.001300
0.004117
0.003199
0.003180
0.004162
0.005873
0.004588
0.004582
0.005898
0.003328
0.002703
0.002702
0.003327
0.002407
0.002027
0.002027
0.002409
0.001790
0.001557
0.001557
0.001789
0.001139
0.001036
0.001036
0.001139
0.001034
0.001034
0.001034
0.001034
0.001034
0.001034
0.001034
0.001034
0.001016
0.001016
0.001016
0.001016
0.001016

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Cold Formed Design 3 - Shear Details - AISI-ASD96, Part 1 of 4

DesignSect
DesignType
Status
VMajorCombo
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK

U.S ARMY CORPS

OF ENGINEERS

VMajorLoc
mm
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00

VMajorRatio
0.001016
0.001016
0.001016
0.001016
0.001016
0.001016
0.001016
0.001016
0.001016
0.001016
0.001016
0.001016
0.001016
0.001016
0.001016
0.001016
0.001016
0.001016
0.001016
0.001016
0.001016
0.001016
0.001016
0.001016
0.001016
0.001016
0.001016
0.001016
0.001016
0.001016
0.001016
0.001016
0.001016
0.001016
0.001016
0.001016
0.001016
0.001016
0.001016
0.001016
0.001016
0.001016
0.001016
0.001016
0.001016
0.001016
0.001016
0.001016
0.001016
0.001016

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame
490
491
492
493
494
495
496
497
498
503
504
505
506
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
28
30
31
32
33
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Cold Formed Design 3 - Shear Details - AISI-ASD96, Part 1 of 4

DesignSect
DesignType
Status
VMajorCombo
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
TRACK
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD
STUD
STUD
STUD
STUD
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER

Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Beam
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Beam
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace

100

DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD3
DCLD3
DCLD3
DCLD3
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD3
DCLD3
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD3
DCLD3
DCLD3
DCLD1
DCLD3
DCLD3
DCLD3
DCLD3
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD3
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1

U.S ARMY CORPS

OF ENGINEERS

VMajorLoc
mm
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
1200.00
0.00
1200.00
0.00
1376.09
1376.09
1376.09
1376.09
1376.09
1376.09
1376.09
1376.09
608.28
564.90
1173.17
0.00
0.00
1173.17
0.00
970.42
0.00
0.00
688.04
688.04
688.04
688.04
608.28
564.90
1173.17
0.00
1173.17
1173.17
0.00
970.42
0.00
608.28
564.90
1173.17
0.00
1173.17
1173.17

VMajorRatio
0.001016
0.001016
0.001016
0.001016
0.001016
0.001016
0.001016
0.001016
0.001016
0.003393
0.002042
0.002627
0.003377
0.000391
0.000391
0.000367
0.000367
0.000391
0.000391
0.006139
0.006197
0.000502
0.000652
0.001008
0.000984
0.000972
0.000973
0.001541
0.005878
0.209408
0.000345
0.019212
0.000939
0.019331
0.000930
0.000502
0.000651
0.001015
0.000979
0.000969
0.000970
0.001013
0.000813
0.003045
0.000502
0.000652
0.001015
0.000978
0.000969
0.000970

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Cold Formed Design 3 - Shear Details - AISI-ASD96, Part 1 of 4

DesignSect
DesignType
Status
VMajorCombo
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER
STUD RAFTER

Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace
Brace

DCLD1
DCLD1
DCLD2
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD3
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD1
DCLD3
DCLD3
DCLD3
DCLD3
DCLD3
DCLD3
DCLD3

U.S ARMY CORPS

OF ENGINEERS

VMajorLoc
mm
0.00
0.00
0.00
608.28
564.90
1173.17
0.00
1173.17
1173.17
0.00
970.42
0.00
608.28
564.90
1173.17
0.00
0.00
1173.17
0.00
970.42
0.00
202.76
0.00
202.76
0.00

VMajorRatio

VMinorLoc

VMinorRatio

mm
0.00
1173.17
0.00
1173.17
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
1506.32
566.12
0.00

0.003655
0.004007
0.003587
0.003569
0.003652
0.000976
0.000370
0.000213
0.000127
0.000104
0.000000
0.000984
0.002341
0.000000
0.006987
0.006879
0.002396
0.000833

0.001009
0.000814
0.002122
0.000502
0.000651
0.001015
0.000979
0.000969
0.000970
0.001013
0.000814
0.003291
0.000502
0.000652
0.001007
0.000984
0.000974
0.000980
0.001792
0.007216
0.202846
0.209340
0.005785
0.202697
0.007126

Table: Cold Formed Design 3 - Shear Details - AISI-ASD96, Part 2 of 4

Frame

54
55
56
57
58
60
61
62
63
64
65
67
68
69
70
71
72
73

Table: Cold Formed Design 3 - Shear Details - AISI-ASD96, Part 2 of 4

VMajDsgn
VnMajor OmegaVMaj
TorsionMaj
VMinorCombo
or
Kgf
Kgf
Kgf-mm
2.00
1640.64
1.670000
0.00
DCLD3
0.96
1640.64
1.670000
0.00
DCLD3
0.95
1640.64
1.670000
0.00
DCLD3
0.97
1640.64
1.670000
0.00
DCLD3
0.99
1640.64
1.670000
0.00
DCLD2
6.33
1640.64
1.670000
0.00
DCLD3
7.69
1640.64
1.670000
0.00
DCLD3
7.60
1640.64
1.670000
0.00
DCLD3
8.45
1640.64
1.670000
0.00
DCLD3
15.13
1640.64
1.670000
0.00
DCLD3
7.84
1640.64
1.670000
0.00
DCLD3
2.70
1640.64
1.670000
0.00
DCLD3
0.64
1640.64
1.670000
0.00
DCLD3
9.465E-02
1640.64
1.670000
0.00
DCLD1
1.02
1640.64
1.670000
0.00
DCLD3
0.99
1640.64
1.670000
0.00
DCLD3
0.47
1640.64
1.670000
0.00
DCLD2
6.33
1640.64
1.670000
0.00
DCLD3

101

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame

74
75
76
77
78
79
80
81
82
83
240
241
242
243
244
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
271
272
273
274
275
277
278
279
280
281
282

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Cold Formed Design 3 - Shear Details - AISI-ASD96, Part 2 of 4

VMajDsgn
VnMajor OmegaVMaj
TorsionMaj
VMinorCombo
or
Kgf
Kgf
Kgf-mm
7.69
1640.64
1.670000
0.00
DCLD3
7.60
1640.64
1.670000
0.00
DCLD3
8.45
1640.64
1.670000
0.00
DCLD3
15.13
1640.64
1.670000
0.00
DCLD3
7.84
1640.64
1.670000
0.00
DCLD3
2.71
1640.64
1.670000
0.00
DCLD3
9.465E-02
1640.64
1.670000
0.00
DCLD1
1.02
1640.64
1.670000
0.00
DCLD3
0.99
1640.64
1.670000
0.00
DCLD3
0.47
1640.64
1.670000
0.00
DCLD2
1.00
1640.64
1.670000
0.00
DCLD3
0.95
1640.64
1.670000
0.00
DCLD2
0.95
1640.64
1.670000
0.00
DCLD2
0.96
1640.64
1.670000
0.00
DCLD2
1.00
1640.64
1.670000
0.00
DCLD3
6.71
1640.64
1.670000
0.00
DCLD8
9.00
1640.64
1.670000
0.00
DCLD9
9.16
1640.64
1.670000
0.00
DCLD8
10.27
1640.64
1.670000
0.00
DCLD8
17.97
1640.64
1.670000
0.00
DCLD8
9.30
1640.64
1.670000
0.00
DCLD9
3.99
1640.64
1.670000
0.00
DCLD3
2.83
1640.64
1.670000
0.00
DCLD3
0.64
1640.64
1.670000
0.00
DCLD3
9.465E-02
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD2
0.99
1640.64
1.670000
0.00
DCLD2
0.47
1640.64
1.670000
0.00
DCLD2
6.71
1640.64
1.670000
0.00
DCLD9
9.00
1640.64
1.670000
0.00
DCLD8
9.16
1640.64
1.670000
0.00
DCLD9
10.27
1640.64
1.670000
0.00
DCLD9
17.97
1640.64
1.670000
0.00
DCLD9
9.30
1640.64
1.670000
0.00
DCLD8
2.84
1640.64
1.670000
0.00
DCLD3
9.465E-02
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD2
0.99
1640.64
1.670000
0.00
DCLD2
0.47
1640.64
1.670000
0.00
DCLD2
0.99
1640.64
1.670000
0.00
DCLD2
0.95
1640.64
1.670000
0.00
DCLD2
0.95
1640.64
1.670000
0.00
DCLD2
0.96
1640.64
1.670000
0.00
DCLD2
1.00
1640.64
1.670000
0.00
DCLD3
6.34
1640.64
1.670000
0.00
DCLD8
8.65
1640.64
1.670000
0.00
DCLD9
8.83
1640.64
1.670000
0.00
DCLD8
9.91
1640.64
1.670000
0.00
DCLD8
17.45
1640.64
1.670000
0.00
DCLD8
8.98
1640.64
1.670000
0.00
DCLD9

102

U.S ARMY CORPS

OF ENGINEERS

VMinorLoc

VMinorRatio

mm
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
1506.32
566.12
0.00
1173.17
1173.17
1173.17
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
1506.32
566.12
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
1506.32
566.12
0.00
1173.17
1173.17
1173.17
0.00
0.00
0.00
0.00
0.00
0.00
0.00

0.000296
0.000173
0.000101
0.000000
0.000000
0.000971
0.000000
0.006987
0.006880
0.002396
0.003706
0.004134
0.003533
0.003567
0.003609
0.000375
0.000000
0.000000
0.000000
0.000000
0.000000
0.008583
0.000000
0.002134
0.000000
0.007091
0.006998
0.002396
0.000375
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.007091
0.006998
0.002396
0.003680
0.004125
0.003531
0.003574
0.003610
0.000372
0.000000
0.000000
0.000000
0.000000
0.000000

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame

283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
302
303
304
305
306
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
333
334
335

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Cold Formed Design 3 - Shear Details - AISI-ASD96, Part 2 of 4

VMajDsgn
VnMajor OmegaVMaj
TorsionMaj
VMinorCombo
or
Kgf
Kgf
Kgf-mm
2.78
1640.64
1.670000
0.00
DCLD3
3.00
1640.64
1.670000
0.00
DCLD2
0.64
1640.64
1.670000
0.00
DCLD3
9.465E-02
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD3
0.99
1640.64
1.670000
0.00
DCLD2
0.47
1640.64
1.670000
0.00
DCLD2
6.34
1640.64
1.670000
0.00
DCLD9
8.65
1640.64
1.670000
0.00
DCLD8
8.83
1640.64
1.670000
0.00
DCLD9
9.91
1640.64
1.670000
0.00
DCLD9
17.45
1640.64
1.670000
0.00
DCLD9
8.98
1640.64
1.670000
0.00
DCLD8
3.00
1640.64
1.670000
0.00
DCLD2
9.465E-02
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD3
0.99
1640.64
1.670000
0.00
DCLD2
0.47
1640.64
1.670000
0.00
DCLD2
1.00
1640.64
1.670000
0.00
DCLD2
0.95
1640.64
1.670000
0.00
DCLD3
0.95
1640.64
1.670000
0.00
DCLD3
0.96
1640.64
1.670000
0.00
DCLD3
1.00
1640.64
1.670000
0.00
DCLD2
6.71
1640.64
1.670000
0.00
DCLD8
9.00
1640.64
1.670000
0.00
DCLD9
9.15
1640.64
1.670000
0.00
DCLD8
10.27
1640.64
1.670000
0.00
DCLD8
17.99
1640.64
1.670000
0.00
DCLD8
9.27
1640.64
1.670000
0.00
DCLD9
4.31
1640.64
1.670000
0.00
DCLD2
3.26
1640.64
1.670000
0.00
DCLD3
0.64
1640.64
1.670000
0.00
DCLD2
9.465E-02
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD3
0.99
1640.64
1.670000
0.00
DCLD3
0.47
1640.64
1.670000
0.00
DCLD2
6.71
1640.64
1.670000
0.00
DCLD9
9.00
1640.64
1.670000
0.00
DCLD8
9.15
1640.64
1.670000
0.00
DCLD9
10.27
1640.64
1.670000
0.00
DCLD9
17.98
1640.64
1.670000
0.00
DCLD9
9.27
1640.64
1.670000
0.00
DCLD8
3.26
1640.64
1.670000
0.00
DCLD3
9.465E-02
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD3
0.99
1640.64
1.670000
0.00
DCLD3
0.47
1640.64
1.670000
0.00
DCLD2
2.33
1640.64
1.670000
0.00
DCLD2
0.96
1640.64
1.670000
0.00
DCLD3
0.96
1640.64
1.670000
0.00
DCLD2

103

U.S ARMY CORPS

OF ENGINEERS

VMinorLoc

VMinorRatio

mm
0.00
0.00
0.00
0.00
0.00
1506.32
566.12
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
1506.32
566.12
0.00
1173.17
1173.17
1173.17
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
1506.32
566.12
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
1506.32
566.12
0.00
1173.17
0.00

0.007192
0.000000
0.002153
0.000000
0.007068
0.006980
0.002396
0.000372
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.007068
0.006980
0.002396
0.003681
0.004146
0.003544
0.003575
0.003606
0.000375
0.000000
0.000000
0.000000
0.000000
0.000000
0.007535
0.000000
0.002131
0.000000
0.007088
0.007002
0.002396
0.000375
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.007088
0.007002
0.002396
0.003630
0.004022
0.003574

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame

336
337
339
340
341
342
343
344
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Cold Formed Design 3 - Shear Details - AISI-ASD96, Part 2 of 4

VMajDsgn
VnMajor OmegaVMaj
TorsionMaj
VMinorCombo
or
Kgf
Kgf
Kgf-mm
0.97
1640.64
1.670000
0.00
DCLD3
0.99
1640.64
1.670000
0.00
DCLD3
6.33
1640.64
1.670000
0.00
DCLD3
7.69
1640.64
1.670000
0.00
DCLD3
7.60
1640.64
1.670000
0.00
DCLD3
8.44
1640.64
1.670000
0.00
DCLD3
15.15
1640.64
1.670000
0.00
DCLD3
7.80
1640.64
1.670000
0.00
DCLD3
3.41
1640.64
1.670000
0.00
DCLD3
0.64
1640.64
1.670000
0.00
DCLD2
9.465E-02
1640.64
1.670000
0.00
DCLD1
1.03
1640.64
1.670000
0.00
DCLD2
1.00
1640.64
1.670000
0.00
DCLD2
0.47
1640.64
1.670000
0.00
DCLD2
6.33
1640.64
1.670000
0.00
DCLD3
7.69
1640.64
1.670000
0.00
DCLD3
7.60
1640.64
1.670000
0.00
DCLD3
8.44
1640.64
1.670000
0.00
DCLD3
15.15
1640.64
1.670000
0.00
DCLD3
7.80
1640.64
1.670000
0.00
DCLD3
3.41
1640.64
1.670000
0.00
DCLD3
9.465E-02
1640.64
1.670000
0.00
DCLD1
1.03
1640.64
1.670000
0.00
DCLD2
1.00
1640.64
1.670000
0.00
DCLD2
0.47
1640.64
1.670000
0.00
DCLD2
1.02
1640.64
1.670000
0.00
DCLD1
1.02
1640.64
1.670000
0.00
DCLD1
1.02
1640.64
1.670000
0.00
DCLD1
1.02
1640.64
1.670000
0.00
DCLD1
1.02
1640.64
1.670000
0.00
DCLD1
1.02
1640.64
1.670000
0.00
DCLD1
1.02
1640.64
1.670000
0.00
DCLD1
1.02
1640.64
1.670000
0.00
DCLD1
1.49
1640.64
1.670000
0.00
DCLD2
1.02
1640.64
1.670000
0.00
DCLD2
1.02
1640.64
1.670000
0.00
DCLD3
1.49
1640.64
1.670000
0.00
DCLD3
2.34
1640.64
1.670000
0.00
DCLD3
2.04
1640.64
1.670000
0.00
DCLD2
2.04
1640.64
1.670000
0.00
DCLD2
2.34
1640.64
1.670000
0.00
DCLD2
3.15
1640.64
1.670000
0.00
DCLD2
2.66
1640.64
1.670000
0.00
DCLD3
2.66
1640.64
1.670000
0.00
DCLD2
3.15
1640.64
1.670000
0.00
DCLD3
4.36
1640.64
1.670000
0.00
DCLD2
3.54
1640.64
1.670000
0.00
DCLD3
3.54
1640.64
1.670000
0.00
DCLD2
4.36
1640.64
1.670000
0.00
DCLD3
7.72
1640.64
1.670000
0.00
DCLD3

104

U.S ARMY CORPS

OF ENGINEERS

VMinorLoc

VMinorRatio

mm
1173.17
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
1506.32
566.12
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
1506.32
566.12
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00

0.003578
0.003648
0.000925
0.000362
0.000212
0.000123
0.000117
0.000119
0.001178
0.002339
0.000000
0.006984
0.006884
0.002396
0.000782
0.000288
0.000173
0.000000
0.000104
0.000145
0.001165
0.000000
0.006984
0.006884
0.002396
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000365
0.000315
0.000314
0.000370
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000432
0.000384
0.000379
0.000466
0.000225

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame

388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Cold Formed Design 3 - Shear Details - AISI-ASD96, Part 2 of 4

VMajDsgn
VnMajor OmegaVMaj
TorsionMaj
VMinorCombo
or
Kgf
Kgf
Kgf-mm
6.00
1640.64
1.670000
0.00
DCLD2
6.01
1640.64
1.670000
0.00
DCLD3
7.70
1640.64
1.670000
0.00
DCLD2
5.45
1640.64
1.670000
0.00
DCLD3
4.17
1640.64
1.670000
0.00
DCLD2
4.19
1640.64
1.670000
0.00
DCLD3
5.39
1640.64
1.670000
0.00
DCLD2
1.69
1640.64
1.670000
0.00
DCLD2
1.08
1640.64
1.670000
0.00
DCLD3
1.08
1640.64
1.670000
0.00
DCLD3
2.04
1640.64
1.670000
0.00
DCLD3
2.06
1640.64
1.670000
0.00
DCLD3
1.08
1640.64
1.670000
0.00
DCLD3
1.08
1640.64
1.670000
0.00
DCLD3
1.70
1640.64
1.670000
0.00
DCLD2
5.39
1640.64
1.670000
0.00
DCLD2
4.19
1640.64
1.670000
0.00
DCLD3
4.17
1640.64
1.670000
0.00
DCLD2
5.45
1640.64
1.670000
0.00
DCLD3
7.69
1640.64
1.670000
0.00
DCLD2
6.01
1640.64
1.670000
0.00
DCLD3
6.00
1640.64
1.670000
0.00
DCLD2
7.73
1640.64
1.670000
0.00
DCLD3
4.36
1640.64
1.670000
0.00
DCLD3
3.54
1640.64
1.670000
0.00
DCLD2
3.54
1640.64
1.670000
0.00
DCLD3
4.36
1640.64
1.670000
0.00
DCLD2
3.15
1640.64
1.670000
0.00
DCLD2
2.65
1640.64
1.670000
0.00
DCLD3
2.66
1640.64
1.670000
0.00
DCLD2
3.16
1640.64
1.670000
0.00
DCLD3
2.34
1640.64
1.670000
0.00
DCLD3
2.04
1640.64
1.670000
0.00
DCLD2
2.04
1640.64
1.670000
0.00
DCLD2
2.34
1640.64
1.670000
0.00
DCLD2
1.49
1640.64
1.670000
0.00
DCLD2
1.02
1640.64
1.670000
0.00
DCLD2
1.02
1640.64
1.670000
0.00
DCLD3
1.49
1640.64
1.670000
0.00
DCLD3
1.02
1640.64
1.670000
0.00
DCLD1
1.02
1640.64
1.670000
0.00
DCLD1
1.02
1640.64
1.670000
0.00
DCLD1
1.02
1640.64
1.670000
0.00
DCLD1
1.02
1640.64
1.670000
0.00
DCLD1
1.02
1640.64
1.670000
0.00
DCLD1
1.02
1640.64
1.670000
0.00
DCLD1
1.02
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1

105

U.S ARMY CORPS

OF ENGINEERS

VMinorLoc

VMinorRatio

mm
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00

0.000181
0.000185
0.000176
0.000821
0.000624
0.000641
0.000717
0.001013
0.000857
0.000855
0.001098
0.001122
0.000853
0.000859
0.000989
0.000703
0.000644
0.000622
0.000835
0.000169
0.000185
0.000180
0.000232
0.000470
0.000379
0.000385
0.000427
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000365
0.000315
0.000314
0.000371
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame

438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Cold Formed Design 3 - Shear Details - AISI-ASD96, Part 2 of 4

VMajDsgn
VnMajor OmegaVMaj
TorsionMaj
VMinorCombo
or
Kgf
Kgf
Kgf-mm
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1

106

U.S ARMY CORPS

OF ENGINEERS

VMinorLoc

VMinorRatio

0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame

488
489
490
491
492
493
494
495
496
497
498
503
504
505
506
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
28
30
31
32
33
99
100
101
102
103
104
105
106
107
108
109
110
111

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Cold Formed Design 3 - Shear Details - AISI-ASD96, Part 2 of 4

VMajDsgn
VnMajor OmegaVMaj
TorsionMaj
VMinorCombo
or
Kgf
Kgf
Kgf-mm
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
1.00
1640.64
1.670000
0.00
DCLD1
4.45
1640.64
1.670000
0.00
DCLD3
2.67
1640.64
1.670000
0.00
DCLD1
3.44
1640.64
1.670000
0.00
DCLD1
4.42
1640.64
1.670000
0.00
DCLD2
0.38
1640.64
1.670000
0.00
DCLD2
0.38
1640.64
1.670000
0.00
DCLD2
0.36
1640.64
1.670000
0.00
DCLD2
0.36
1640.64
1.670000
0.00
DCLD2
0.38
1640.64
1.670000
0.00
DCLD3
0.38
1640.64
1.670000
0.00
DCLD3
8.04
1640.64
1.670000
0.00
DCLD2
8.12
1640.64
1.670000
0.00
DCLD2
0.49
1640.64
1.670000
0.00
DCLD2
0.64
1640.64
1.670000
0.00
DCLD3
0.99
1640.64
1.670000
0.00
DCLD2
0.97
1640.64
1.670000
0.00
DCLD3
0.95
1640.64
1.670000
0.00
DCLD3
0.96
1640.64
1.670000
0.00
DCLD3
2.02
1640.64
1.670000
0.00
DCLD3
7.70
1640.64
1.670000
0.00
DCLD3
274.30
1640.64
1.670000
0.00
DCLD2
0.34
1640.64
1.670000
0.00
DCLD2
25.17
1640.64
1.670000
0.00
DCLD2
1.23
1640.64
1.670000
0.00
DCLD3
25.32
1640.64
1.670000
0.00
DCLD2
1.22
1640.64
1.670000
0.00
DCLD3
0.49
1640.64
1.670000
0.00
DCLD2
0.64
1640.64
1.670000
0.00
DCLD3
1.00
1640.64
1.670000
0.00
DCLD3
0.96
1640.64
1.670000
0.00
DCLD2
0.95
1640.64
1.670000
0.00
DCLD2
0.95
1640.64
1.670000
0.00
DCLD2
1.00
1640.64
1.670000
0.00
DCLD3
0.80
1640.64
1.670000
0.00
DCLD3
3.99
1640.64
1.670000
0.00
DCLD3
0.49
1640.64
1.670000
0.00
DCLD2
0.64
1640.64
1.670000
0.00
DCLD3
1.00
1640.64
1.670000
0.00
DCLD3
0.96
1640.64
1.670000
0.00
DCLD2

107

U.S ARMY CORPS

OF ENGINEERS

VMinorLoc

VMinorRatio

mm
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
1376.09
1376.09
1376.09
1376.09
1376.09
1376.09
1376.09
1376.09
0.00
564.90
1173.17
0.00
1173.17
0.00
1173.17
970.42
202.76
400.00
0.00
688.04
0.00
688.04
0.00
564.90
1173.17
0.00
0.00
0.00
1173.17
970.42
202.76
0.00
564.90
1173.17
0.00

0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.000000
0.005930
0.005930
0.005954
0.005954
0.005982
0.005982
0.005959
0.005959
0.001825
0.002341
0.003652
0.003570
0.003586
0.004009
0.003651
0.003178
0.008392
0.001693
0.005783
0.005879
0.005784
0.005880
0.001825
0.002133
0.003608
0.003568
0.003535
0.004135
0.003703
0.003505
0.008521
0.001825
0.002153
0.003610
0.003574

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame

112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
U.S ARMY CORPS
OF ENGINEERS

C O L D F O M R E D T R U SS

Table: Cold Formed Design 3 - Shear Details - AISI-ASD96, Part 2 of 4

VMajDsgn
VnMajor OmegaVMaj
TorsionMaj
VMinorCombo
or
Kgf
Kgf
Kgf-mm
0.95
1640.64
1.670000
0.00
DCLD2
0.95
1640.64
1.670000
0.00
DCLD2
0.99
1640.64
1.670000
0.00
DCLD2
0.80
1640.64
1.670000
0.00
DCLD3
2.78
1640.64
1.670000
0.00
DCLD3
0.49
1640.64
1.670000
0.00
DCLD2
0.64
1640.64
1.670000
0.00
DCLD2
1.00
1640.64
1.670000
0.00
DCLD2
0.96
1640.64
1.670000
0.00
DCLD3
0.95
1640.64
1.670000
0.00
DCLD3
0.95
1640.64
1.670000
0.00
DCLD3
1.00
1640.64
1.670000
0.00
DCLD2
0.80
1640.64
1.670000
0.00
DCLD2
4.31
1640.64
1.670000
0.00
DCLD2
0.49
1640.64
1.670000
0.00
DCLD2
0.64
1640.64
1.670000
0.00
DCLD2
0.99
1640.64
1.670000
0.00
DCLD3
0.97
1640.64
1.670000
0.00
DCLD3
0.96
1640.64
1.670000
0.00
DCLD2
0.96
1640.64
1.670000
0.00
DCLD3
2.35
1640.64
1.670000
0.00
DCLD2
9.45
1640.64
1.670000
0.00
DCLD2
265.71
1640.64
1.670000
0.00
DCLD3
274.21
1640.64
1.670000
0.00
DCLD2
7.58
1640.64
1.670000
0.00
DCLD3
265.51
1640.64
1.670000
0.00
DCLD3
9.33
1640.64
1.670000
0.00
DCLD2

VMinorLoc

VMinorRatio

mm
0.00
0.00
1173.17
970.42
202.76
0.00
564.90
1173.17
0.00
0.00
0.00
1173.17
970.42
202.76
0.00
564.90
1173.17
0.00
1173.17
0.00
1173.17
970.42
202.76
0.00
0.00
0.00
0.00

0.003531
0.004125
0.003680
0.003475
0.007192
0.001825
0.002131
0.003606
0.003574
0.003543
0.004145
0.003683
0.003463
0.007597
0.001825
0.002339
0.003649
0.003577
0.003575
0.004021
0.003634
0.003092
0.008790
0.008434
0.003185
0.008749
0.003085

Table: Cold Formed Design 3 - Shear Details - AISI-ASD96, Part 3 of 4

Frame

54
55
56
57
58
60
61
62
63
64
65
67
68
69
70

Table: Cold Formed Design 3 - Shear Details - AISI-ASD96, Part 3 of 4

VMinDsgn
VnMinor OmegaVMin
TorsionMin
SRLimit
or
Kgf
Kgf
Kgf-mm
2.00
1298.73
1.670000
0.00
1.000000
0.96
1298.73
1.670000
0.00
1.000000
0.95
1298.73
1.670000
0.00
1.000000
0.97
1298.73
1.670000
0.00
1.000000
0.99
1298.73
1.670000
0.00
1.000000
6.33
900.23
1.670000
0.00
1.000000
7.69
900.23
1.670000
0.00
1.000000
7.60
900.23
1.670000
0.00
1.000000
8.45
900.23
1.670000
0.00
1.000000
15.13
900.23
1.670000
0.00
1.000000
7.84
900.23
1.670000
0.00
1.000000
2.70
900.23
1.670000
0.00
1.000000
0.64
1298.73
1.670000
0.00
1.000000
9.465E-02
900.23
1.670000
0.00
1.000000
1.02
900.23
1.670000
0.00
1.000000

108

RLLF

1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000
1.000000

FramingType

Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame

71
72
73
74
75
76
77
78
79
80
81
82
83
240
241
242
243
244
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
271
272
273
274
275
277
278
279

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Cold Formed Design 3 - Shear Details - AISI-ASD96, Part 3 of 4

VMinDsgn
VnMinor OmegaVMin
TorsionMin
SRLimit
or
Kgf
Kgf
Kgf-mm
0.99
900.23
1.670000
0.00
1.000000
0.47
900.23
1.670000
0.00
1.000000
6.33
900.23
1.670000
0.00
1.000000
7.69
900.23
1.670000
0.00
1.000000
7.60
900.23
1.670000
0.00
1.000000
8.45
900.23
1.670000
0.00
1.000000
15.13
900.23
1.670000
0.00
1.000000
7.84
900.23
1.670000
0.00
1.000000
2.71
900.23
1.670000
0.00
1.000000
9.465E-02
900.23
1.670000
0.00
1.000000
1.02
900.23
1.670000
0.00
1.000000
0.99
900.23
1.670000
0.00
1.000000
0.47
900.23
1.670000
0.00
1.000000
1.00
1298.73
1.670000
0.00
1.000000
0.95
1298.73
1.670000
0.00
1.000000
0.95
1298.73
1.670000
0.00
1.000000
0.96
1298.73
1.670000
0.00
1.000000
1.00
1298.73
1.670000
0.00
1.000000
6.71
900.23
1.670000
0.00
1.000000
9.00
900.23
1.670000
0.00
1.000000
9.16
900.23
1.670000
0.00
1.000000
10.27
900.23
1.670000
0.00
1.000000
17.97
900.23
1.670000
0.00
1.000000
9.30
900.23
1.670000
0.00
1.000000
3.99
1298.73
1.670000
0.00
1.000000
2.83
900.23
1.670000
0.00
1.000000
0.64
1298.73
1.670000
0.00
1.000000
9.465E-02
900.23
1.670000
0.00
1.000000
1.00
900.23
1.670000
0.00
1.000000
0.99
900.23
1.670000
0.00
1.000000
0.47
900.23
1.670000
0.00
1.000000
6.71
900.23
1.670000
0.00
1.000000
9.00
900.23
1.670000
0.00
1.000000
9.16
900.23
1.670000
0.00
1.000000
10.27
900.23
1.670000
0.00
1.000000
17.97
900.23
1.670000
0.00
1.000000
9.30
900.23
1.670000
0.00
1.000000
2.84
900.23
1.670000
0.00
1.000000
9.465E-02
900.23
1.670000
0.00
1.000000
1.00
900.23
1.670000
0.00
1.000000
0.99
900.23
1.670000
0.00
1.000000
0.47
900.23
1.670000
0.00
1.000000
0.99
1298.73
1.670000
0.00
1.000000
0.95
1298.73
1.670000
0.00
1.000000
0.95
1298.73
1.670000
0.00
1.000000
0.96
1298.73
1.670000
0.00
1.000000
1.00
1298.73
1.670000
0.00
1.000000
6.34
900.23
1.670000
0.00
1.000000
8.65
900.23
1.670000
0.00
1.000000
8.83
900.23
1.670000
0.00
1.000000

109

RLLF

U.S ARMY CORPS

OF ENGINEERS

FramingType

Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced
Braced

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame

280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
302
303
304
305
306
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Cold Formed Design 3 - Shear Details - AISI-ASD96, Part 3 of 4

VMinDsgn
VnMinor OmegaVMin
TorsionMin
SRLimit
or
Kgf
Kgf
Kgf-mm
9.91
900.23
1.670000
0.00
1.000000
17.45
900.23
1.670000
0.00
1.000000
8.98
900.23
1.670000
0.00
1.000000
2.78
1298.73
1.670000
0.00
1.000000
3.00
900.23
1.670000
0.00
1.000000
0.64
1298.73
1.670000
0.00
1.000000
9.465E-02
900.23
1.670000
0.00
1.000000
1.00
900.23
1.670000
0.00
1.000000
0.99
900.23
1.670000
0.00
1.000000
0.47
900.23
1.670000
0.00
1.000000
6.34
900.23
1.670000
0.00
1.000000
8.65
900.23
1.670000
0.00
1.000000
8.83
900.23
1.670000
0.00
1.000000
9.91
900.23
1.670000
0.00
1.000000
17.45
900.23
1.670000
0.00
1.000000
8.98
900.23
1.670000
0.00
1.000000
3.00
900.23
1.670000
0.00
1.000000
9.465E-02
900.23
1.670000
0.00
1.000000
1.00
900.23
1.670000
0.00
1.000000
0.99
900.23
1.670000
0.00
1.000000
0.47
900.23
1.670000
0.00
1.000000
1.00
1298.73
1.670000
0.00
1.000000
0.95
1298.73
1.670000
0.00
1.000000
0.95
1298.73
1.670000
0.00
1.000000
0.96
1298.73
1.670000
0.00
1.000000
1.00
1298.73
1.670000
0.00
1.000000
6.71
900.23
1.670000
0.00
1.000000
9.00
900.23
1.670000
0.00
1.000000
9.15
900.23
1.670000
0.00
1.000000
10.27
900.23
1.670000
0.00
1.000000
17.99
900.23
1.670000
0.00
1.000000
9.27
900.23
1.670000
0.00
1.000000
4.31
1298.73
1.670000
0.00
1.000000
3.26
900.23
1.670000
0.00
1.000000
0.64
1298.73
1.670000
0.00
1.000000
9.465E-02
900.23
1.670000
0.00
1.000000
1.00
900.23
1.670000
0.00
1.000000
0.99
900.23
1.670000
0.00
1.000000
0.47
900.23
1.670000
0.00
1.000000
6.71
900.23
1.670000
0.00
1.000000
9.00
900.23
1.670000
0.00
1.000000
9.15
900.23
1.670000
0.00
1.000000
10.27
900.23
1.670000
0.00
1.000000
17.98
900.23
1.670000
0.00
1.000000
9.27
900.23
1.670000
0.00
1.000000
3.26
900.23
1.670000
0.00
1.000000
9.465E-02
900.23
1.670000
0.00
1.000000
1.00
900.23
1.670000
0.00
1.000000
0.99
900.23
1.670000
0.00
1.000000
0.47
900.23
1.670000
0.00
1.000000

110

RLLF

U.S ARMY CORPS

OF ENGINEERS

FramingType

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame

333
334
335
336
337
339
340
341
342
343
344
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Cold Formed Design 3 - Shear Details - AISI-ASD96, Part 3 of 4

VMinDsgn
VnMinor OmegaVMin
TorsionMin
SRLimit
or
Kgf
Kgf
Kgf-mm
2.33
1298.73
1.670000
0.00
1.000000
0.96
1298.73
1.670000
0.00
1.000000
0.96
1298.73
1.670000
0.00
1.000000
0.97
1298.73
1.670000
0.00
1.000000
0.99
1298.73
1.670000
0.00
1.000000
6.33
900.23
1.670000
0.00
1.000000
7.69
900.23
1.670000
0.00
1.000000
7.60
900.23
1.670000
0.00
1.000000
8.44
900.23
1.670000
0.00
1.000000
15.15
900.23
1.670000
0.00
1.000000
7.80
900.23
1.670000
0.00
1.000000
3.41
900.23
1.670000
0.00
1.000000
0.64
1298.73
1.670000
0.00
1.000000
9.465E-02
900.23
1.670000
0.00
1.000000
1.03
900.23
1.670000
0.00
1.000000
1.00
900.23
1.670000
0.00
1.000000
0.47
900.23
1.670000
0.00
1.000000
6.33
900.23
1.670000
0.00
1.000000
7.69
900.23
1.670000
0.00
1.000000
7.60
900.23
1.670000
0.00
1.000000
8.44
900.23
1.670000
0.00
1.000000
15.15
900.23
1.670000
0.00
1.000000
7.80
900.23
1.670000
0.00
1.000000
3.41
900.23
1.670000
0.00
1.000000
9.465E-02
900.23
1.670000
0.00
1.000000
1.03
900.23
1.670000
0.00
1.000000
1.00
900.23
1.670000
0.00
1.000000
0.47
900.23
1.670000
0.00
1.000000
1.02
900.23
1.670000
0.00
1.000000
1.02
900.23
1.670000
0.00
1.000000
1.02
900.23
1.670000
0.00
1.000000
1.02
900.23
1.670000
0.00
1.000000
1.02
900.23
1.670000
0.00
1.000000
1.02
900.23
1.670000
0.00
1.000000
1.02
900.23
1.670000
0.00
1.000000
1.02
900.23
1.670000
0.00
1.000000
1.49
900.23
1.670000
0.00
1.000000
1.02
900.23
1.670000
0.00
1.000000
1.02
900.23
1.670000
0.00
1.000000
1.49
900.23
1.670000
0.00
1.000000
2.34
900.23
1.670000
0.00
1.000000
2.04
900.23
1.670000
0.00
1.000000
2.04
900.23
1.670000
0.00
1.000000
2.34
900.23
1.670000
0.00
1.000000
3.15
900.23
1.670000
0.00
1.000000
2.66
900.23
1.670000
0.00
1.000000
2.66
900.23
1.670000
0.00
1.000000
3.15
900.23
1.670000
0.00
1.000000
4.36
900.23
1.670000
0.00
1.000000
3.54
900.23
1.670000
0.00
1.000000

111

RLLF

U.S ARMY CORPS

OF ENGINEERS

FramingType

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame

385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Cold Formed Design 3 - Shear Details - AISI-ASD96, Part 3 of 4

VMinDsgn
VnMinor OmegaVMin
TorsionMin
SRLimit
or
Kgf
Kgf
Kgf-mm
3.54
900.23
1.670000
0.00
1.000000
4.36
900.23
1.670000
0.00
1.000000
7.72
900.23
1.670000
0.00
1.000000
6.00
900.23
1.670000
0.00
1.000000
6.01
900.23
1.670000
0.00
1.000000
7.70
900.23
1.670000
0.00
1.000000
5.45
900.23
1.670000
0.00
1.000000
4.17
900.23
1.670000
0.00
1.000000
4.19
900.23
1.670000
0.00
1.000000
5.39
900.23
1.670000
0.00
1.000000
1.69
900.23
1.670000
0.00
1.000000
1.08
900.23
1.670000
0.00
1.000000
1.08
900.23
1.670000
0.00
1.000000
2.04
900.23
1.670000
0.00
1.000000
2.06
900.23
1.670000
0.00
1.000000
1.08
900.23
1.670000
0.00
1.000000
1.08
900.23
1.670000
0.00
1.000000
1.70
900.23
1.670000
0.00
1.000000
5.39
900.23
1.670000
0.00
1.000000
4.19
900.23
1.670000
0.00
1.000000
4.17
900.23
1.670000
0.00
1.000000
5.45
900.23
1.670000
0.00
1.000000
7.69
900.23
1.670000
0.00
1.000000
6.01
900.23
1.670000
0.00
1.000000
6.00
900.23
1.670000
0.00
1.000000
7.73
900.23
1.670000
0.00
1.000000
4.36
900.23
1.670000
0.00
1.000000
3.54
900.23
1.670000
0.00
1.000000
3.54
900.23
1.670000
0.00
1.000000
4.36
900.23
1.670000
0.00
1.000000
3.15
900.23
1.670000
0.00
1.000000
2.65
900.23
1.670000
0.00
1.000000
2.66
900.23
1.670000
0.00
1.000000
3.16
900.23
1.670000
0.00
1.000000
2.34
900.23
1.670000
0.00
1.000000
2.04
900.23
1.670000
0.00
1.000000
2.04
900.23
1.670000
0.00
1.000000
2.34
900.23
1.670000
0.00
1.000000
1.49
900.23
1.670000
0.00
1.000000
1.02
900.23
1.670000
0.00
1.000000
1.02
900.23
1.670000
0.00
1.000000
1.49
900.23
1.670000
0.00
1.000000
1.02
900.23
1.670000
0.00
1.000000
1.02
900.23
1.670000
0.00
1.000000
1.02
900.23
1.670000
0.00
1.000000
1.02
900.23
1.670000
0.00
1.000000
1.02
900.23
1.670000
0.00
1.000000
1.02
900.23
1.670000
0.00
1.000000
1.02
900.23
1.670000
0.00
1.000000
1.02
900.23
1.670000
0.00
1.000000

112

RLLF

U.S ARMY CORPS

OF ENGINEERS

FramingType

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame

435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Cold Formed Design 3 - Shear Details - AISI-ASD96, Part 3 of 4

VMinDsgn
VnMinor OmegaVMin
TorsionMin
SRLimit
or
Kgf
Kgf
Kgf-mm
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000

113

RLLF

U.S ARMY CORPS

OF ENGINEERS

FramingType

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame

485
486
487
488
489
490
491
492
493
494
495
496
497
498
503
504
505
506
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
28
30
31
32
33
99
100
101
102
103
104
105
106
107
108

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Cold Formed Design 3 - Shear Details - AISI-ASD96, Part 3 of 4

VMinDsgn
VnMinor OmegaVMin
TorsionMin
SRLimit
or
Kgf
Kgf
Kgf-mm
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
1.00
1334.09
1.670000
0.00
1.000000
4.45
900.23
1.670000
0.00
1.000000
2.67
900.23
1.670000
0.00
1.000000
3.44
900.23
1.670000
0.00
1.000000
4.42
900.23
1.670000
0.00
1.000000
0.38
900.23
1.670000
0.00
1.000000
0.38
900.23
1.670000
0.00
1.000000
0.36
900.23
1.670000
0.00
1.000000
0.36
900.23
1.670000
0.00
1.000000
0.38
900.23
1.670000
0.00
1.000000
0.38
900.23
1.670000
0.00
1.000000
8.04
900.23
1.670000
0.00
1.000000
8.12
900.23
1.670000
0.00
1.000000
0.49
1298.73
1.670000
0.00
1.000000
0.64
1298.73
1.670000
0.00
1.000000
0.99
1298.73
1.670000
0.00
1.000000
0.97
1298.73
1.670000
0.00
1.000000
0.95
1298.73
1.670000
0.00
1.000000
0.96
1298.73
1.670000
0.00
1.000000
2.02
1298.73
1.670000
0.00
1.000000
7.70
1298.73
1.670000
0.00
1.000000
274.30
1298.73
1.670000
0.00
1.000000
0.34
900.23
1.670000
0.00
1.000000
25.17
900.23
1.670000
0.00
1.000000
1.23
900.23
1.670000
0.00
1.000000
25.32
900.23
1.670000
0.00
1.000000
1.22
900.23
1.670000
0.00
1.000000
0.49
1298.73
1.670000
0.00
1.000000
0.64
1298.73
1.670000
0.00
1.000000
1.00
1298.73
1.670000
0.00
1.000000
0.96
1298.73
1.670000
0.00
1.000000
0.95
1298.73
1.670000
0.00
1.000000
0.95
1298.73
1.670000
0.00
1.000000
1.00
1298.73
1.670000
0.00
1.000000
0.80
1298.73
1.670000
0.00
1.000000
3.99
1298.73
1.670000
0.00
1.000000
0.49
1298.73
1.670000
0.00
1.000000

114

RLLF

U.S ARMY CORPS

OF ENGINEERS

FramingType

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

Frame

109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Table: Cold Formed Design 3 - Shear Details - AISI-ASD96, Part 3 of 4

VMinDsgn
VnMinor OmegaVMin
TorsionMin
SRLimit
or
Kgf
Kgf
Kgf-mm
0.64
1298.73
1.670000
0.00
1.000000
1.00
1298.73
1.670000
0.00
1.000000
0.96
1298.73
1.670000
0.00
1.000000
0.95
1298.73
1.670000
0.00
1.000000
0.95
1298.73
1.670000
0.00
1.000000
0.99
1298.73
1.670000
0.00
1.000000
0.80
1298.73
1.670000
0.00
1.000000
2.78
1298.73
1.670000
0.00
1.000000
0.49
1298.73
1.670000
0.00
1.000000
0.64
1298.73
1.670000
0.00
1.000000
1.00
1298.73
1.670000
0.00
1.000000
0.96
1298.73
1.670000
0.00
1.000000
0.95
1298.73
1.670000
0.00
1.000000
0.95
1298.73
1.670000
0.00
1.000000
1.00
1298.73
1.670000
0.00
1.000000
0.80
1298.73
1.670000
0.00
1.000000
4.31
1298.73
1.670000
0.00
1.000000
0.49
1298.73
1.670000
0.00
1.000000
0.64
1298.73
1.670000
0.00
1.000000
0.99
1298.73
1.670000
0.00
1.000000
0.97
1298.73
1.670000
0.00
1.000000
0.96
1298.73
1.670000
0.00
1.000000
0.96
1298.73
1.670000
0.00
1.000000
2.35
1298.73
1.670000
0.00
1.000000
9.45
1298.73
1.670000
0.00
1.000000
265.71
1298.73
1.670000
0.00
1.000000
274.21
1298.73
1.670000
0.00
1.000000
7.58
1298.73
1.670000
0.00
1.000000
265.51
1298.73
1.670000
0.00
1.000000
9.33
1298.73
1.670000
0.00
1.000000

RLLF

Table: Cold Formed Design 3 - Shear Details - AISI-ASD96, Part 4 of 4

Frame
54
55
56
57
58
60
61
62
63
64
65
67
68

Table: Cold Formed Design 3 - Shear Details - AISI-ASD96, Part 4 of 4

ErrMsg
WarnMsg
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages

No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages
No Messages

115

U.S ARMY CORPS

OF ENGINEERS

OF ENGINEERS

P R O J E C T:
ANCOP/PRC
LO C AT I O N :
KANDAHAR,
AFGHANISTAN
CONTRACT #
W5J9LE-12-C -0019

D E PA R T M E N T O F T H E A R M Y
U. S ARMY CORP S OF
E N GIN EE RIN G

DESIGNED
BY:
H. SOLTANI

AFGHANISTAN ENGINEERING
Contractor & Designer
S TAT E
CORPS
ENGINEERING
First Street, Karte4, Kabul
Afghanistan
[email protected]

REVIEWED
BY:
NASEEM

APPROVED
BY:
SCE

D AT E : 1 3 - N O V- 2 0 1 2
C O L D F O M R E D T R U SS

Steel Design Ratio:

123

U.S ARMY CORPS

OF ENGINEERS

Design Calculation-Skylight Structure
100% (1)
Design Calculation-Skylight Structure
7 pages
PARKING SHADE Report
No ratings yet
PARKING SHADE Report
33 pages
Struct Report
100% (1)
Struct Report
40 pages
Reinforced Concrete Buildings: Behavior and Design
From Everand
Reinforced Concrete Buildings: Behavior and Design
Ahmad A. Hamid
5/5 (1)
(Springer Tracts On Transportation and Traffic 6) Tomaž Tollazzi (Auth.) - Alternative Types of Roundabouts - An Informational Guide-Springer International Publishing (2015)
100% (2)
(Springer Tracts On Transportation and Traffic 6) Tomaž Tollazzi (Auth.) - Alternative Types of Roundabouts - An Informational Guide-Springer International Publishing (2015)
214 pages
Experiment To Study Flow Through A Venturimeter
57% (7)
Experiment To Study Flow Through A Venturimeter
26 pages
ME 554 Problem Set-06 Solid Rocket Motors PDF
No ratings yet
ME 554 Problem Set-06 Solid Rocket Motors PDF
3 pages
K-Span Shed (6mX6m) FT-DR-J202305-S01-001
No ratings yet
K-Span Shed (6mX6m) FT-DR-J202305-S01-001
147 pages
Report Roof Structure
No ratings yet
Report Roof Structure
44 pages
ARAMCO Drawing
No ratings yet
ARAMCO Drawing
1 page
MCZ Canopy Design Report
No ratings yet
MCZ Canopy Design Report
85 pages
Storage Tent (Tent Structure)
No ratings yet
Storage Tent (Tent Structure)
60 pages
Design Report of Steel Structure
No ratings yet
Design Report of Steel Structure
61 pages
Final Steel Report
No ratings yet
Final Steel Report
23 pages
Structural Design Summary For 12X20Meter Steel Structure: Client
100% (1)
Structural Design Summary For 12X20Meter Steel Structure: Client
9 pages
Design Example
No ratings yet
Design Example
40 pages
AISC Project
No ratings yet
AISC Project
132 pages
PEB-Preliminary structural report-MYAUNG TAKAR FACTORY-B01-REV01-14.05.2024
No ratings yet
PEB-Preliminary structural report-MYAUNG TAKAR FACTORY-B01-REV01-14.05.2024
51 pages
Check List For Coal Shed
No ratings yet
Check List For Coal Shed
1 page
17112-Daljeet - Thethi - Abc Assignment No 2
No ratings yet
17112-Daljeet - Thethi - Abc Assignment No 2
7 pages
Toaz - Info Design Calculation Skylight Structure PR
No ratings yet
Toaz - Info Design Calculation Skylight Structure PR
7 pages
Generator Shade 29.07.2024
No ratings yet
Generator Shade 29.07.2024
33 pages
JUTE shed-DEA
No ratings yet
JUTE shed-DEA
39 pages
Canteen & Garbage Shed - Report
No ratings yet
Canteen & Garbage Shed - Report
19 pages
Design Report (Steel Part) Service Building
0% (1)
Design Report (Steel Part) Service Building
20 pages
Revised Car Park Report_2025!02!17
No ratings yet
Revised Car Park Report_2025!02!17
9 pages
Duresa's Advanced Steel Structures Project Updated
No ratings yet
Duresa's Advanced Steel Structures Project Updated
49 pages
Design Calculations: For Steel Structure
50% (2)
Design Calculations: For Steel Structure
46 pages
Design Report - Steel Structure Shade
No ratings yet
Design Report - Steel Structure Shade
53 pages
Steel Structural Design
No ratings yet
Steel Structural Design
33 pages
Structural Safety Initial Report Full 20 JAN 2020-2
No ratings yet
Structural Safety Initial Report Full 20 JAN 2020-2
62 pages
APST340 Assig 6
No ratings yet
APST340 Assig 6
54 pages
Structural Steel Design Calculations: Design of Pinnacle Crescent
No ratings yet
Structural Steel Design Calculations: Design of Pinnacle Crescent
11 pages
Steel Design Report-1
No ratings yet
Steel Design Report-1
61 pages
DEA Report On Temporary Shed
No ratings yet
DEA Report On Temporary Shed
33 pages
TANG-INA-TOTOO-NA-TO
No ratings yet
TANG-INA-TOTOO-NA-TO
25 pages
Steel Design Basics L1V1
No ratings yet
Steel Design Basics L1V1
28 pages
Structural Assessment of Transportation Facility: North Kitsap School District
No ratings yet
Structural Assessment of Transportation Facility: North Kitsap School District
8 pages
MPB GENERAL NOTE
No ratings yet
MPB GENERAL NOTE
6 pages
Weld Prep PDF
No ratings yet
Weld Prep PDF
1 page
Weld Prep
No ratings yet
Weld Prep
1 page
Design Narrative Report for Control Building Truss Roof
No ratings yet
Design Narrative Report for Control Building Truss Roof
3 pages
Shade Report
No ratings yet
Shade Report
11 pages
Civil Eng. Dept.: Al-Mansour University College
No ratings yet
Civil Eng. Dept.: Al-Mansour University College
95 pages
NDH-01RP-S0001 - MAIN REPORT-STEEL STRUCTURAL DESIGN-RevB
No ratings yet
NDH-01RP-S0001 - MAIN REPORT-STEEL STRUCTURAL DESIGN-RevB
88 pages
Structure Design Report 4H7@1000 - Purlin
No ratings yet
Structure Design Report 4H7@1000 - Purlin
54 pages
Report Revison
No ratings yet
Report Revison
28 pages
Structural Design Report
No ratings yet
Structural Design Report
72 pages
Pavilion Strucutral Design Report
No ratings yet
Pavilion Strucutral Design Report
33 pages
Structural Design Calculation of Car Parking Shades
No ratings yet
Structural Design Calculation of Car Parking Shades
135 pages
Intro To Steel Structure and Design
No ratings yet
Intro To Steel Structure and Design
29 pages
Load-Design Philosophy
No ratings yet
Load-Design Philosophy
113 pages
Design Calculation Rev00
No ratings yet
Design Calculation Rev00
134 pages
Rsc Dea Report
No ratings yet
Rsc Dea Report
69 pages
Structure Design Report 5H8@1000 - Purlin
No ratings yet
Structure Design Report 5H8@1000 - Purlin
64 pages
Steel Canopy
No ratings yet
Steel Canopy
7 pages
AL Majd School Shade Structure 6 Structural Report Rev 0
No ratings yet
AL Majd School Shade Structure 6 Structural Report Rev 0
218 pages
2105-GEN-CV-CAL-050 - R0 - Shelter Structural Calculation
No ratings yet
2105-GEN-CV-CAL-050 - R0 - Shelter Structural Calculation
223 pages
PEB-Preliminary Structural report-ZAYET KWIN GARDEN INDUSTRIAL PARK PROJECT-B01, B03, B04, B05, B06, B07-REV00-07.11.2023
No ratings yet
PEB-Preliminary Structural report-ZAYET KWIN GARDEN INDUSTRIAL PARK PROJECT-B01, B03, B04, B05, B06, B07-REV00-07.11.2023
37 pages
Bhoj Raj Pant Steel Sap Report
No ratings yet
Bhoj Raj Pant Steel Sap Report
60 pages
Failure of Space Frame in Turkey PDF
No ratings yet
Failure of Space Frame in Turkey PDF
13 pages
3D Printing Jet Parts
From Everand
3D Printing Jet Parts
Jack Patterson
No ratings yet
A Guide to Injection Moulding Technique
From Everand
A Guide to Injection Moulding Technique
Dinbandhu Singh
5/5 (2)
Irregular Structure Req
No ratings yet
Irregular Structure Req
1 page
Intersection Analysis and Operation PDF
No ratings yet
Intersection Analysis and Operation PDF
118 pages
Round-About Traffic Design Landscape Gideon PDF
No ratings yet
Round-About Traffic Design Landscape Gideon PDF
28 pages
RPDM Chapter15
No ratings yet
RPDM Chapter15
28 pages
Design and Analysis of Pre-Engineered Building With Subjected To Seismic Loads Using E-Tabs
No ratings yet
Design and Analysis of Pre-Engineered Building With Subjected To Seismic Loads Using E-Tabs
4 pages
Space Grade CCGA Presentation-1
No ratings yet
Space Grade CCGA Presentation-1
8 pages
Spreadsheets To BS 8110etc: The Concrete Centre
No ratings yet
Spreadsheets To BS 8110etc: The Concrete Centre
1 page
DTS - Mid Term Question Bank
No ratings yet
DTS - Mid Term Question Bank
2 pages
Winkler Curved Beam Theory
No ratings yet
Winkler Curved Beam Theory
21 pages
Mechanical Stirrer & Size Separator Objectives of The Project
No ratings yet
Mechanical Stirrer & Size Separator Objectives of The Project
1 page
Hussain Chem Notes
No ratings yet
Hussain Chem Notes
31 pages
Field & Potential
No ratings yet
Field & Potential
2 pages
Rheology of Suspensions and Emulsions
100% (5)
Rheology of Suspensions and Emulsions
17 pages
Nomoline™ Trouble-Free Sidestream Gas Analysis
No ratings yet
Nomoline™ Trouble-Free Sidestream Gas Analysis
8 pages
AISC-360-05 Example 001 PDF
No ratings yet
AISC-360-05 Example 001 PDF
8 pages
Jee Bommer 2002 Dsha Vs Psha
No ratings yet
Jee Bommer 2002 Dsha Vs Psha
31 pages
Ortloff Comparison
100% (1)
Ortloff Comparison
16 pages
DC - MN 231.15-Rock Mechanics
No ratings yet
DC - MN 231.15-Rock Mechanics
3 pages
Incoloy 800
100% (1)
Incoloy 800
2 pages
Universidad Autónoma Del Estado de México Facultad de Ingeniería
No ratings yet
Universidad Autónoma Del Estado de México Facultad de Ingeniería
40 pages
Energy Forms and Changes PHET Lab-Formal 3
No ratings yet
Energy Forms and Changes PHET Lab-Formal 3
4 pages
Journal of Magnetism and Magnetic Materials
No ratings yet
Journal of Magnetism and Magnetic Materials
1 page
Effect of Pre-Weld Sand Blasting On Residual Stress Distribution in Ship Steel Using Magnetic Barkhausen Noise Technique
No ratings yet
Effect of Pre-Weld Sand Blasting On Residual Stress Distribution in Ship Steel Using Magnetic Barkhausen Noise Technique
6 pages
Physics 2015 HSC Exam
No ratings yet
Physics 2015 HSC Exam
44 pages
Canopy
No ratings yet
Canopy
2 pages
Design of Condenser & Reboiler
No ratings yet
Design of Condenser & Reboiler
39 pages
C 17
No ratings yet
C 17
10 pages
Quantum Chemistry And Dynamics Of Excited States Methods And Applications 1st Edition Leticia Gonzlez pdf download
No ratings yet
Quantum Chemistry And Dynamics Of Excited States Methods And Applications 1st Edition Leticia Gonzlez pdf download
80 pages
Microstructure-Properties: II Age Hardening: 27-302 Fall, 2002 Prof. A. D. Rollett
No ratings yet
Microstructure-Properties: II Age Hardening: 27-302 Fall, 2002 Prof. A. D. Rollett
36 pages
Hydroballistics Modeling
No ratings yet
Hydroballistics Modeling
373 pages
Set No. 1
No ratings yet
Set No. 1
8 pages
JDM A24
No ratings yet
JDM A24
6 pages
To Study Inversions of 4 Bar Mechanisms
50% (2)
To Study Inversions of 4 Bar Mechanisms
3 pages