Scribd
Upload
123 views

Common G-Codes For CNC Machining Centers

This document lists common G-codes and M-codes used for CNC machining centers. It provides descriptions for over 50 G-codes for functions like rapid positioning, linear and circular interpolation, coordinate systems, canned cycles, and more. It also lists over 20 M-codes for controlling machine functions like spindle control, coolant control, tool changes, and subprograms.

Uploaded by

ivtrubelja
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as ODT, PDF, TXT or read online on Scribd
123 views

Common G-Codes For CNC Machining Centers

This document lists common G-codes and M-codes used for CNC machining centers. It provides descriptions for over 50 G-codes for functions like rapid positioning, linear and circular interpolation, coordinate systems, canned cycles, and more. It also lists over 20 M-codes for controlling machine functions like spindle control, coolant control, tool changes, and subprograms.

Uploaded by

ivtrubelja
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as ODT, PDF, TXT or read online on Scribd
You are on page 1/ 2

Common G-Codes for CNC Machining Centers

G00 - Rapid Positioning


G52 - Local Coordinate Setting
G01 - Linear Interpolation
G53 - Machine Coordinate Setting
G02 - Circular Interpolation CW
G54 - Workpiece Coordinate Setting 1
G03 - Circular Interpolation CCW
G55 - Workpiece Coordinate Setting 2
G04 - Dwell
G56 - Workpiece Coordinate Setting 3
G05 - High Speed Machining
G57 - Workpiece Coordinate Setting 4
G07 - Imanaginary Axis Designation
G58 - Workpiece Coordinate Setting 5
G09 - Exact Stop Check
G59 - Workpiece Coordinate Setting 6
G10 - Program Parameter Input
G60 - Single Direction Positioning
G11 - Program Peramater Input Cancel
G62 - Automatic Corner Override
G12 - Circle Cutting CW
G63 - Tapping Mode
G13 - Circle Cutting CCW
G64 - Cutting Mode
G17 - XY Plane Selection
G65 - User Simple Macro Call
G18 - XZ Plane Selection
G66 - User Modal Macro Call
G19 - YZ Plane Selection
G67 - User Modal Macro Call Cancel
G20 - Input in Inches
G68 - Coordinate System Rotation On
G21 - Input in Metric
G69 - Coordinate System Rotation Off
G22 - Stored Stroke Limit ON
G70 - Input in Inch
G23 - stored Stroke Limit OFF
G71 - Input in Metric
G27 - Reference Point Return Check
G73 - High Speed Peck Drilling Cycle
G28 - Automatic Return to Reference Point
G74 - Left Hand Tapping Cycle
G29 - Automatic Return from Reference Point
G76 - Fine Boring Cycle
G30 - Return to 2nd, 3rd, 4th Reference Point
G80 - Canned Cycle Cancel
G31 - Skip Function
G81 - Drilling Cycle
G33 - Thread Cutting
G82 - Counter Boring Cycle
G34 - Bolt Hole Circle (Canned Cycle)
G83 - Peck Drilling Cycle
G35 - Line at Angle (Canned Cycle)
G84 - Right Hand Tapping Cycle
G36 - Arc (Canned Cycle)
G85 - Boring Cycle
G40 - Cutter Compensation Cancel
G87 - Back Boring Cycle
G41 - Cutter Compensation Left
G90 - Absolute Positioning
G42 - Cutter Compensation Right
G91 - Incremental Positioning
G43 - Tool Length Compensation +
G92 - Reposition Origin Point
G44 - Tool Length Compensation G94 - Feed Per Minute
G45 - Tool Offset Increase
G95 - Feed Per Revolution
G46 - Tool Offset Decrease
G96 - Constant Surface Speed Control On
G49 - Tool Length Compensation Cancel
G97 - Constant Surface Speed Control Off
G50 - Scaling Off
G98 - Set Initial Plane
G51 - Scaling On
G99 - Return to R Plane

Common M-Codes for CNC Machining Centers


M00 - Program Stop
M14 - Spindle Air Blow On
M01 - Optional Stop
M15 - Spindle Air Blow Off
M02 - Program End
M16 - Air Blast / Tool Changer
M03 - Spindle On Clockwise
M18 - Air Blast Off
M04 - Spindle On Counter Clockwise
M19 - Spindle Orient
M05 - Spindle Stop
M29 - Rigid Tapping
M06 - Tool Change
M30 - End Program, Return to Start
M07 - Thru Spindle or Mist Coolant On
M60 - Pallet Change
M08 - Flood Coolant On
M61 - Load Pallet 1
M09 - Coolant Off
M62 - Load Pallet 2
M10 - Table Pallet Clamp
M98 - Call Subprogram
M11 - Table Pallet Unclamp
M99 - Cancel Subprogram
M12 - Shower Coolant On

You might also like