Scribd
Upload
54 views

Lode Fiber Viewer Step-By-step

The document provides instructions for opening a Lode Fiber Viewer map in MapPoint, cleaning up the display by turning off grid layers, and plotting the map as a PDF. Key steps include zooming into the required area in MapPoint, ignoring errors, turning off the GRID and GRIDTXT layers, selecting the Monochrome.ctb plot style, choosing a PDF printer, unchecking plot styles and lineweights options, setting the paper size to ARCH E, plotting the extents, and previewing before plotting to PDF.

Uploaded by

Chris Martinez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
54 views

Lode Fiber Viewer Step-By-step

The document provides instructions for opening a Lode Fiber Viewer map in MapPoint, cleaning up the display by turning off grid layers, and plotting the map as a PDF. Key steps include zooming into the required area in MapPoint, ignoring errors, turning off the GRID and GRIDTXT layers, selecting the Monochrome.ctb plot style, choosing a PDF printer, unchecking plot styles and lineweights options, setting the paper size to ARCH E, plotting the extents, and previewing before plotting to PDF.

Uploaded by

Chris Martinez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Lode Fiber Viewer Clean Map

Logon

Select MS MapPoint Icon

Zoom into map to area required, too big and it will not be useable

Hit OK

You may get error, Hit OK

Ignore & Close Error Log

Lode will open with area requested.

To clean up Map,
Turn off Grid layers by ..
Using pull down arrow,
Click light bulb for layers
-GRID
-GRIDTXT

Display should be clear of Grid & Grid


Text

You now are ready to PLOT as PDF,

Under Plot style table, select

Go to File, Plot.

Monochrome.ctb

Under
Printer/plotter select,
Name: PDF995
or your PDF printer
Under Plot options
Uncheck, Plot with
plot styles
Then Uncheck, Plot
object lineweights
Select Paper Size,
ARCH E or large
enough that when zoomed in the drawing is clear.

Select Plot area What to Plot: Extents

Also ensure Fit to Paper is checked


You may also Preview to check output.
Lastly hit OK

You may now use Adobe PDF or Autodesk to print to paper in sections or add fiber design.

You might also like