Scribd
Upload
27 views

Cone Bottom

This document is a calculator that determines measurements for a cone-bottomed tank based on user-input dimensions. It calculates the tank's circumference, slant height, cone angle, cut-out radius, and volume based on the diameter, desired depth, and bottom hole diameter provided by the user in centimeters. The volume is also provided in liters, imperial gallons, and US gallons using a formula from the listed website.

Uploaded by

tasingenieria
Copyright
© © All Rights Reserved
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
27 views

Cone Bottom

This document is a calculator that determines measurements for a cone-bottomed tank based on user-input dimensions. It calculates the tank's circumference, slant height, cone angle, cut-out radius, and volume based on the diameter, desired depth, and bottom hole diameter provided by the user in centimeters. The volume is also provided in liters, imperial gallons, and US gallons using a formula from the listed website.

Uploaded by

tasingenieria
Copyright
© © All Rights Reserved
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 1

Cone-bottomed tank calculator

Select units:

centimetres

Diameter of tank base =


Desired depth (height) of cone =
O.D. of bottom hole if required =
The tank circumference is:

The "slant height" will be:


The half-angle of the cone will be:
The angle of the "pie slice" will be:
Radius of cut-out for bottom hole will be:

0
0 degrees
0 degrees
0

The volume of the formed cone will be:

0 cubic centimetres
0 litres or
0 Imperial gallons or

From formula given at http://www.journeytoforever.org/biodiesel_processor3.html


Note that an 'overlap' seam is not catered for.

0 U.S. gallons

You might also like