Scribd
Upload
8 views

SOLID Visions LTD 3d - Pipe: (Load "3d - Pipe) Use Menu To Set Main Size and

This document provides installation instructions and licensing information for the 3d_Pipe AutoCAD extension from SOLID visions Ltd. It explains that the shareware version allows drawing pipe diameters between 2 and 4 inches while the full commercial version, which costs $200, supports pipe sizes from 1/2 to 16 inches and various ANSI fitting classes. It also notes the user is responsible for the accuracy of drawings and that the developer may update the software.

Uploaded by

ruben quedo salazar
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
8 views

SOLID Visions LTD 3d - Pipe: (Load "3d - Pipe) Use Menu To Set Main Size and

This document provides installation instructions and licensing information for the 3d_Pipe AutoCAD extension from SOLID visions Ltd. It explains that the shareware version allows drawing pipe diameters between 2 and 4 inches while the full commercial version, which costs $200, supports pipe sizes from 1/2 to 16 inches and various ANSI fitting classes. It also notes the user is responsible for the accuracy of drawings and that the developer may update the software.

Uploaded by

ruben quedo salazar
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

SOLID visions Ltd

3d_Pipe
Installation :
Unzip 3d_pipe into a directory specified in
AutoCAD 2000s support file search path, then load
3d_pipe.mnu into your AutoCAD menu To use type :
(load 3d_pipe) Use menu to set main size and
reduction size for pipe work to draw.
Please note this is a shareware version and allows you to draw only
Dia 2 4 Pipe work and flanges
For full version please contact Peter Harrison
[email protected] .
Licensed users will be elligable for any future updates and
improvements.
Full version costs US$200.00 only, and allows users to draw dia
16 ,150, 300,600 & 900# class fittings, flanges and pipe to
ANSI B16.9 (BS 1640).
Please use at own risk, Solid Visions ltd cannot guarantee the
dimensional accuracy of Solids created using these blocks and lisp
macros.
Solid Visions also retains the right to update and / Or modify the
lisp macros and or blocks at any time.

You might also like