Scribd
Upload
66 views1 page

Low Temperature Vessels Block Insulation: Plate 4-810

The document describes insulation techniques for low temperature vessels and equipment below 0°C. It involves using multiple layers of rigid block insulation with contraction joints filled with blanket insulation to absorb movement. Details are provided on securing the insulation with bands and installing vapor barriers.

Uploaded by

Gary Clark
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
66 views1 page

Low Temperature Vessels Block Insulation: Plate 4-810

The document describes insulation techniques for low temperature vessels and equipment below 0°C. It involves using multiple layers of rigid block insulation with contraction joints filled with blanket insulation to absorb movement. Details are provided on securing the insulation with bands and installing vapor barriers.

Uploaded by

Gary Clark
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Vessels, Tanks, and Equipment

Plate 4-810

Low Temperature Vessels Block Insulation

10
A

12

13

12
C

3
4

1
B
5
11

15

14

2011 MICA

Low temperature below 0C


(32F) installations such as
refrigerant
storage
tanks,
and process equipment may
require multiple layer block
construction, securement of
the insulation with bands and
the design of contraction joints.
Contraction joint is filled with
blanket insulation to absorb linear
contraction of vessel when at
operating temperatures. (Material
is compressed tightly into joint.)

Detail A Contraction joint (typical).

6. Jacketing.

Detail B Double layer staggered joint construction.

7. Bands. (Provide for contraction).

Detail C Joint sealant application.

8. Head insulation shown secured with a floating ring of


cable fastened to another ring of cable under head
flange. (See Detail A, also Plate 4-620, Detail A & B).

Materials: Rigid block insulation, fiber blanket insulation,


jacketing, bands, stranded cable, and vapor retarder mastic.
1.

Vessel surface.

10. Vapor retarder mastic (if required).

2. Contraction joint insulation.


3. Contraction joint. (See Detail A, also Plate 4-620, Detail
B-7).
4. Vapor stop (dam) (See Plate 4-660)
Must

seal outside of the insulation equal to the


insulation thickness.
Seal

annular space .
5. Insulation.

9. Tank head jacket or finish. (See Plate 4-620, Detail B).

11. Bottom insulation. (High compressive strength, water,


vapor resistance, and low coefficient of friction required).
12. Vapor retarder sealant (if required).
13. Vapor retarder jacket.
14. Damp-proof course in between layers.
15. Bottom course bedding sealant to prevent flood
water ingress. (Bedding sealant must serve as a vapor
retarder.) See Plate 4-660.

7th edition mica national insulation standards

You might also like