Scribd
Upload
48 views

Check en Linea - c406

The document describes ADR check valves for in-line mounting with port sizes ranging from G 1/4" to G 1 1/4". The ADR valves are direct operated check valves designed to operate in hydraulic systems with mineral oil or synthetic fluids with similar characteristics. The valves have maximum recommended flows ranging from 40 to 500 liters per minute and can withstand pressures up to 400 bars depending on the specific model. Dimensional specifications and flow versus pressure drop diagrams are provided for each valve model.

Uploaded by

DANIZACH
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
48 views

Check en Linea - c406

The document describes ADR check valves for in-line mounting with port sizes ranging from G 1/4" to G 1 1/4". The ADR valves are direct operated check valves designed to operate in hydraulic systems with mineral oil or synthetic fluids with similar characteristics. The valves have maximum recommended flows ranging from 40 to 500 liters per minute and can withstand pressures up to 400 bars depending on the specific model. Dimensional specifications and flow versus pressure drop diagrams are provided for each valve model.

Uploaded by

DANIZACH
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

www.atos.

com

Table C406-4/E

Check valves type ADR


in-line mounting - from G 1/4" to G 1 1/4" threaded ports
ADR are direct operated check valves
for in-line mounting available with port
size from 1/4 to 11/4 GAS.
Cartridge designed to operate in
hydraulic systems with hydraulic mineral oil or synthetic fluid having similar
lubricating characteristics.

ADR-10

Flow up to 500 l/min.


Pressure up to 400 bar.

ADR-32

MODEL CODE

ADR

10

Check valve
in-line mounting

Series number

Size/threated connections:
06 = G 1/4
10 = G 3/8
15 = G 1/2
20 = G 3/4
25 = G 1
32 = G 1 1/4

**

Cracking pressure:
- = 0,5 bar
/2 = 2 bar
/4 = 4 bar
/8 = 8 bar

HYDRAULIC CHARACTERISTICS

Hydraulic symbol

Valve model
Max recommended flow
Max pressure

[l/min]

ADR-06

ADR-10

ADR-15

ADR-20

ADR-25

ADR-32

40

80

150

300

360

500

[bar]

400

350

MAIN CHARACTERISTICS OF CHECK VALVES TYPE ADR

Assembly position / location

Any position

Fluid

Hydraulic oil as per DIN 51524 ... 535;

Recommended viscosity

15 100 mm2/s at 40C (ISO VG 15 100)

Fluid contamination class

ISO 19/16, achieved with in line filters at 25 m value and 25 75 (recommended)

Fluid temperature

T 80C

Flow direction

As shown in the symbol at section 2

Rated flow

See diagrams Q/p at section 4

C406

FLOW VERSUS PRESSURE DROP DIAGRAMS Based on based on mineral oil ISO VG 46 at 50C

3
2
1

3
2

Flow [l/min]

1 = ADR-10
2 = ADR-10/2
3 = ADR-10/4
4 = ADR-10/8

1 = ADR-15
2 = ADR-15/2
3 = ADR-15/4
4 = ADR-15/8
ADR-25

3
2
1

ADR-32

Valve pressure drop [bar]

Valve pressure drop [bar]

ADR-20

Valve pressure drop [bar]

Flow [l/min]

1 = ADR-06
2 = ADR-06/2
3 = ADR-06/4
4 = ADR-06/8

3
2
1

Flow [l/min]

3
2
1

Flow [l/min]

Flow [l/min]
1 = ADR-32
2 = ADR-32/2
3 = ADR-32/4
4 = ADR-32/8

1 = ADR-25
2 = ADR-25/2
3 = ADR-25/4
4 = ADR-25/8

1 = ADR-20
2 = ADR-20/2
3 = ADR-20/4
4 = ADR-20/8

07/04

Flow [l/min]

ADR-15

Valve pressure drop [bar]

ADR-10

Valve pressure drop [bar]

Valve pressure drop [bar]

ADR-06

DIMENSIONS [mm]

Model

Mass [kg]

ADR - 06

22

67

12

13

G 1/4

0,2

ADR - 10

27

70

12

13

G 3/8

0,4

ADR - 15

32

82,5

14

17

G 1/2

0,6

ADR - 20

36

102,5

16

21,5

G 3/4

0,9

ADR - 25

46

120

18

24,5

G 1

2,1

ADR - 32

55

137,5

20

23

G 1 1/4

2,5

You might also like