Scribd
Upload
57 views

Exhaust Removal

This document provides instructions for removing the exhaust pipe assembly from a 2008 Toyota xB with a 2AZ-FE engine. The steps include removing the engine under cover, heated oxygen sensor, tail exhaust pipe assembly, tail pipe baffle, center exhaust pipe assembly, front floor center brace, and front exhaust pipe assembly. Bolts and supports connecting the different exhaust pipe sections need to be removed, along with gaskets between the pipe sections.

Uploaded by

Kidd
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
57 views

Exhaust Removal

This document provides instructions for removing the exhaust pipe assembly from a 2008 Toyota xB with a 2AZ-FE engine. The steps include removing the engine under cover, heated oxygen sensor, tail exhaust pipe assembly, tail pipe baffle, center exhaust pipe assembly, front floor center brace, and front exhaust pipe assembly. Bolts and supports connecting the different exhaust pipe sections need to be removed, along with gaskets between the pipe sections.

Uploaded by

Kidd
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

2AZ-FE EXHAUST: EXHAUST PIPE: REMOVAL (2008 xB) https://techinfo.toyota.com/t3Portal/document/rm/RM05G0U/xhtml/RM...

Last Modified: 2-12-2007 1.6 A

Service Category: Engine/Hybrid System Section: Intake/Exhaust

Model Year: 2008 Model: xB Doc ID: RM000001XBN00LX

Title: 2AZ-FE EXHAUST: EXHAUST PIPE: REMOVAL (2008 xB)

REMOVAL
1. REMOVE NO. 1 ENGINE UNDER COVER

2. REMOVE HEATED OXYGEN SENSOR

3. REMOVE TAIL EXHAUST PIPE ASSEMBLY

(a) Remove the 2 bolts and No. 4 exhaust pipe support and remove the tail exhaust pipe assembly.

(b) Remove the exhaust pipe gasket.

4. REMOVE TAIL PIPE BAFFLE

(a) Using a plastic hammer, uniformly tap out and remove the exhaust tail pipe baffle.

5. REMOVE NO. 2 CENTER EXHAUST PIPE ASSEMBLY

1 of 3 2/28/2008 10:52 AM
2AZ-FE EXHAUST: EXHAUST PIPE: REMOVAL (2008 xB) https://techinfo.toyota.com/t3Portal/document/rm/RM05G0U/xhtml/RM...

(a) Remove the 2 bolts and 2 compression springs.

(b) Remove the No. 4 exhaust pipe support and remove the No. 2 center exhaust pipe assembly.

(c) Remove the exhaust pipe gasket.

6. REMOVE FRONT FLOOR CENTER BRACE

(a) Remove the 4 bolts and remove the front floor center brace.

7. REMOVE CENTER EXHAUST PIPE ASSEMBLY

(a) Remove the 2 bolts and 2 No. 4 exhaust pipe supports and remove the center exhaust pipe assembly.

(b) Remove the exhaust pipe gasket.

2 of 3 2/28/2008 10:52 AM
2AZ-FE EXHAUST: EXHAUST PIPE: REMOVAL (2008 xB) https://techinfo.toyota.com/t3Portal/document/rm/RM05G0U/xhtml/RM...

8. REMOVE FRONT EXHAUST PIPE ASSEMBLY

(a) Remove the 2 bolts and 2 compression springs and remove the front exhaust pipe assembly.

3 of 3 2/28/2008 10:52 AM

You might also like