Scribd
Upload
38 views

Plastics Check List

1. The document provides instructions for making two plastic projects: a key tag and photo frame, and a floppy bowl. 2. For the key tag and photo frame, the instructions include straightening plastic, measuring, cutting, filing, sanding, bending, and buffing the plastic. 3. For the floppy bowl, the instructions are to measure and cut a plastic circle, file, sand, and buff it before heating and shaping the plastic into a bowl.

Uploaded by

api-288705695
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
38 views

Plastics Check List

1. The document provides instructions for making two plastic projects: a key tag and photo frame, and a floppy bowl. 2. For the key tag and photo frame, the instructions include straightening plastic, measuring, cutting, filing, sanding, bending, and buffing the plastic. 3. For the floppy bowl, the instructions are to measure and cut a plastic circle, file, sand, and buff it before heating and shaping the plastic into a bowl.

Uploaded by

api-288705695
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 6

Plastics Check list

Key Tag
Photo Frame:
1. Get one piece of long plastic
2. Get a tri square and see if there is a gap on the plastic
3. If you had a gap you need to go to the disc sander and
straighten the plastic
4. Then get a ruler and measure the plastic because you are
going to cut a bit of the plastic
5. Once you done that get the rough file and remove the
scratches
6. Then get the smooth file and smooth the sides of the
plastic
7. Then get some sand papers make sure its wet
8. Then buff your plastic to make it smooth
9. Then go to the heater and bend your plastic

Floppy bowl
1.
2.
3.
4.
5.
6.

Get some plastic


Measure a circle on the plastic
Then go to the bandsaw and cut a circle
Then get a rough file and try to remove some scratches
After that get a smooth file to smooth the plastic
Then you get some sand paper to get rid of the remaining
scratches
7. Then go to the buffer and buff the plastic circle
8. Then put your plastic circle in the oven
9. After you done that get the circle out of the oven and put it
on a thing that makes the floppy part of your plastic bowl
10.Then you wait until its dry and then youre done
name

picture

uses

safty

Drill
press

To drill
holes
Into
wood
and
plastic

oven

To
heat
plastic

Safety
glasses
must be
worn at all
times in
work areas.
Long and
loose hair
must be
contained.
Sturdy
footwear
must be
worn at all
times in
work areas.
Close
fitting/prote
ctive
clothing
must be
worn. Rings
and
jewellery
must not be
worn.
Gloves must
not be worn when
using this
machine.
Safety
glasses
must be
worn at all
times in
work areas.
Long
and loose
hair must be
contained.
Appropriate
footwear
with
substantial
uppers must
be worn.

Strip
heater

To
heat
plastic
so you
can
ben it

Disc
Sande
r

To trim
or cut
plastic
or any
other
materi
als
thats
cut
able

Close
fitting/prote
ctive
clothing
must be
worn.
Rings and
jewellery must not
be worn.
Gloves
must be worn
when using this
equipment.
Safety
glasses
must be
worn at all
times in all
workshop
areas.
Appropriate
footwear
with
substantial
uppers must
be worn in
all
workshops.
Protective cotton
gloves must be
worn when using
this equipment.
Safety
glasses
must be
worn at all
times in
work areas.
Long
and loose
hair must be
contained.
Appropriate
footwear
with
substantial
uppers must

Buffin
g
machi
ne

To
smoot
h out
edges
of
plastic

be worn.
Close
fitting/prote
ctive
clothing
must be
worn.
Rings and
jewellery
must not be
worn. Gloves
must be
worn when
using this
equipment.
Safety
glasses
must be
worn at all
times in
work areas.
Long
and loose
hair must be
contained.
Appropriate
footwear
with
substantial
uppers must
be worn.
Close
fitting/prote
ctive
clothing
must be
worn.
Rings and
jewellery
must not be
worn. Gloves
must be
worn when
using this
equipment.

Bands
aw

To cut
out
shapes
or
remov
e parts
of the
materi
al

Jig

To hold
plastic
and
wood
in
place

Safety
glasses
must be
worn at all
times in
work areas.
Long
and loose
hair must be
contained.
Appropriate
footwear
with
substantial
uppers must
be worn.
Close
fitting/prote
ctive
clothing
must be
worn.
Rings and
jewellery
must not be
worn. Gloves
must be
worn when
using this
equipment.
Make sure u
dont have
any loose
clothing

Fluted
dish

To
shape
heated
materi
als to
have a
dish
shape

Make sure to
be wearing
gloves

You might also like