Scribd
Upload
20 views

Synchronous Motor Drive

This document discusses synchronous motor drive systems. It describes different types of synchronous motors including wound field motors, permanent magnet motors, synchronous reluctance motors, and hysteresis motors. It also discusses adjustable frequency control in open loop volts/Hz control mode and self-controlled mode. The document outlines applications of synchronous motors in fiber spinning and textile/paper mills. It provides details on self-control mode, block diagrams, and closed loop control of voltage source inverter and cycloconverter fed synchronous motor drives.

Uploaded by

Swagat Pradhan
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
20 views

Synchronous Motor Drive

This document discusses synchronous motor drive systems. It describes different types of synchronous motors including wound field motors, permanent magnet motors, synchronous reluctance motors, and hysteresis motors. It also discusses adjustable frequency control in open loop volts/Hz control mode and self-controlled mode. The document outlines applications of synchronous motors in fiber spinning and textile/paper mills. It provides details on self-control mode, block diagrams, and closed loop control of voltage source inverter and cycloconverter fed synchronous motor drives.

Uploaded by

Swagat Pradhan
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 21

synchronous

motor drive

Classifications of synchronous motor


Wound field motor
(a)cylindrical rotor wound field motor
(b) salient pole rotor wound field motor
Permanent magnet motor
Synchronous reluctance motor
Hysteresis motor

Adjustable frequency control

Modes of adjustable frequency control


(i) Open loop volts/HZ control (or) separate cotrolled
(or) true synchronous mode
(ii)self-controlled mode

Block diagram

open loop volts/Hz speed control characteristics

appliaction
Fiber spinning
Textile and paper mills

Supply Frequency to the synchronous motor is


controlled from the inverter which receives its firing
pulses from a frequency controlled oscillator.
The machine will exhibits conventional behavior.
Up to base speed the motor operates at constant
torque and above base speed are obtained by
clamping the voltage at rated voltage. Frequency can
be increased and the motor operates in flux
weakening region

Self control mode

Control can modify the angle between the flux


phasors

Because of self-control, machine does not show any


stability or hunting problem of traditional
synchronous machine

The transient response is fast similar to dc machine

The rotor inertia is smaller than dc machine with high


energy magnet

Block diagram

Commutation of the converter feeding the motor is controlled


through the rotor position information from a shaft encoder.
Under over excitation the motor voltages can be employed to
commutate the thyristors at the inverter. Now the inverter
becomes simple. But at low speeds commutation assistance is
required.
Rotor position is sensed and the firing signals to the devices
are synchronized to the motor position.
For every 600 rotation of the rotor a new device in the
sequence is fired

Closed loop control

VSI fed Synchronous Motor


drive

Different schemes of vsi fed


synchronous motor drive

CSI fed Synchronous Motor


drive

Cycloconverter fed Synchronous


Motor drive

commutator less Dc motor

A Synchronous motor in self controlled mode is


called commutator less Dc motor.

You might also like