Scribd
Upload
124 views

AASHTO 2002-LFD Flexural Capacity

This document provides information to calculate the flexural capacity of a rectangular reinforced concrete section with tension reinforcement only using the AASHTO 2002 method. It lists the section properties, material strengths, and reinforcement details. It then calculates the depth of the rectangular stress block as 16.553 mm and the factored moment capacity as 46.24 kN.m using these inputs and the provided flexural capacity equation.

Uploaded by

caner_kurtoglu-1
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
124 views

AASHTO 2002-LFD Flexural Capacity

This document provides information to calculate the flexural capacity of a rectangular reinforced concrete section with tension reinforcement only using the AASHTO 2002 method. It lists the section properties, material strengths, and reinforcement details. It then calculates the depth of the rectangular stress block as 16.553 mm and the factored moment capacity as 46.24 kN.m using these inputs and the provided flexural capacity equation.

Uploaded by

caner_kurtoglu-1
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1

AASHTO 2002 Flexural Capacity Check - LFD

Rectangular Sections with Tension Reinforcement Only


Section Properties
Section Width (b) =
Section Depth (h) =
Clean Cover (c) =
Effective Depth (d) =
Concrete Strength (fc') =
Steel Yield Strenth (Fy) =
Reinforcement Area (As') =
Strength Reduction Factor () =

1000
180
50
130
30
420
1005
0.9

mm
mm
mm
mm
Mpa
Mpa
mm2

Flexural capactiy of the section is calculated by using the following equation.

Rectangular stress Block Depth (a) =

16.553

mm

Moment Capacity, Mn =

46.24

kN.m

You might also like