0% found this document useful (0 votes)
55 views

Plate Connection Design

This document summarizes the design of an end plate connection. It calculates the nominal reactions on the connection as well as the bolt and weld loads. It then checks that the bolt capacities are sufficient using a M16 grade 8.8 bolt. It also checks that the provided 12mm thick end plate is thick enough to resist bending. Finally, it calculates the loads on the welds and checks that the weld lengths are sufficient.

Uploaded by

Bok Mortega
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
55 views

Plate Connection Design

This document summarizes the design of an end plate connection. It calculates the nominal reactions on the connection as well as the bolt and weld loads. It then checks that the bolt capacities are sufficient using a M16 grade 8.8 bolt. It also checks that the provided 12mm thick end plate is thick enough to resist bending. Finally, it calculates the loads on the welds and checks that the weld lengths are sufficient.

Uploaded by

Bok Mortega
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 4

277980927.

xls 07/30/2015 11:15:23 1/4

DESIGN CONNECTION OF END PLATE

DESIGN NOMINAL REACTIONS ( NODE 167 & 330)


Fx = 0.00 N
Horizontal force along x-axis
Fz = 4790.00 N
Horizontal force along z-axis
Fy = 19540.00 N
Vertical force along y-axis
Moment about x-axis
Moment about y-axis
Moment about z-axis

CHECK FOR BOLT REACTIONS


Bolt Modulus in YY
Bolt Modulus in ZZ
Tension due to moment My

Mx = 648.00 N-m
My = 478.00 N-m
Mz = 3640.00 N-m

y = 520.00 mm
z = 778.00 mm

; Refer to STAAD output


; Refer to STAAD output
; Refer to STAAD output
; Refer to STAAD output
; Refer to STAAD output
; Refer to STAAD output

;2*(50^2+250^2)/250
;2*(135^2+335^2)/335

Ty = 919.23 N
Tz = 4678.66 N
Tx = 0.00 N

; My / y

; Fy / 4

Shear due to moment Mx

Vy = 0.00 N
Vz = 1197.50 N
Vx = 847.52 N

Maximum tension per bolt

T = 5597.89 N

Tension due to moment Mz


Tension due to force Fx
Shear due to force Fy
Shear due to force Fz

; Mz /z
; Fx / 4

; Fz /4

; Tz + Tx + Ty

277980927.xls 07/30/2015 11:15:23 2/4

Shear load on anchor bolt

V = 1467.07 N

; [ (Vx2 + Vy2 + Vz2 ]1/2

277980927.xls 07/30/2015 11:15:23 3/4

Using M16 Grade 8.8 bolt


Diameter of bolt
Effective area of bolt

d = 16.00 mm
Ase = 157.00 mm^2

Tension :
Tension strength of bolt
Tensile capacity of bolt
Maximum tension on bolt

pt = 560.00 MPa
PT = 70336.00 N
T = 5597.89 N

; 0.80* pt * Ase

if ( PT > T, SAFE, FAIL ) = SAFE


Shear :
Shear strength of bolt
Shear capacity of bolt
Maximum shear on bolt

ps = 375.00 MPa
PS = 58875.00 N
V = 1467.07 N

; ps * As

if ( PS > V, SAFE, FAIL ) = SAFE

CHECK FOR PLATE BENDING


Moment in plate due to Ft
Thickness of plate required Tp
Thickness of plate provide Tprov.
Tp < Tprov Therefore SAFE
: ADOPT 470x300x12mm thk END PLATE

= 755715.69
= 9.57
= 12

;Ft*135
;((755715*6)/(1.2*275*150))^0.05

277980927.xls 07/30/2015 11:15:23 4/4

CHECK STRENGTH OF WELD


Total length of welds
Length of weld along z-axis
Length of weld along x-axis

WL = 600.00 mm
Lz = 400.00 mm
Lx = 200.00 mm

Centroid of welds

z = 50
x = 100

Moment of inertia of welds about z-axis

Iz = 1166666.67 mm^3
Ix = 3333333.33 mm^3
Iy = 4500000.00 mm^3

Moment of inertia of welds about y-axis


Moment of inertia of welds about x-axis
Load on weld dueto force Fx
Load on weld due to force Fz
Load on weld due to force Fy
Load on weld due to Mx
Load on weld due to Mz
Load on weld due to My

fx = 0.00 N/mm
fz = 7.98 N/mm
fy = 32.57 N/mm
fx1 = 19.44 N/mm
fz1 = 156.00 N/mm
fy1 = 14.34 N/mm

; Iz + Ix
; Fx / WL
; Fz / WL
; Fy / WL

You might also like