Scribd
Upload
129 views2 pages

Orifice Calculation Sheet Service Fluid Oxygen: G Mass Flow Rate

This document contains an orifice calculation sheet to determine volumetric and mass flow rates of a fluid passing through an orifice plate. It lists input values like line diameters, pressures, fluid properties. It also shows intermediate calculations of velocities and flow coefficients. The final values given are the volumetric flow rate, mass flow rate in kg/s and kg/hr. Notes indicate that user inputs go in highlighted cells and iterative calculations should be enabled.

Uploaded by

Govind Rao
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
129 views2 pages

Orifice Calculation Sheet Service Fluid Oxygen: G Mass Flow Rate

This document contains an orifice calculation sheet to determine volumetric and mass flow rates of a fluid passing through an orifice plate. It lists input values like line diameters, pressures, fluid properties. It also shows intermediate calculations of velocities and flow coefficients. The final values given are the volumetric flow rate, mass flow rate in kg/s and kg/hr. Notes indicate that user inputs go in highlighted cells and iterative calculations should be enabled.

Uploaded by

Govind Rao
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 2

D1

Orifice calculation sheet


Service fluid
Input Values
Line ID
Line ID

D2

Bore Diameter

D2

Bore Diameter

p1

Upstream pressure

p1

upstream pressure

p1 - p2

pressure drop through orifice

p1 - p2

pressure drop through orifice

p2

downstream pressure

ni

kinematic viscosity

mi

dynamic viscosity

rho

upstream density

kappa

isentropic coefficient

D1

Oxygen
Units
154.1 mm
0.1541 m
91.422 mm
0.091422 m
17.5 kg/cm2 g
1817580.345 pa
2500.000 mm WC
24516.625 Pa
1793063.72 pa
1.98456E-006 m2/s
0.000018 Pas
9.07 kg/m3
1.32

Intermediate value
V1

upstream velocity

V2

throat velocity

ReD

upstream Reynolds number

expansion coefficient

coefficient of discharge

beta

diameter relation D2/D1

Area constant

16.65181619 m/s
47.3113619 m/s
1293001.501
0.995367306
0.605093944
0.593264114
1.068359891

Final Values
Q

volumetric flow rate

mass flow rate

mass flow rate

0.310568044 m3/s
2.81685216 kg/s
10140.6678 kg/hr

Note 1
Note 2

Values need to provided by user in highlighted cells


Iterative calculations should be enabled in Excel

Based on the calculation method at:


http://www.flowmeterdirectory.com/flowmeter_orifice_calc.html
Corner taps are assumed.
Valid for gases, steam, and vapors

You might also like