Scribd
Upload
14 views

Port Preparation:: Outline/Installation Drawing, Model Series 3030B

This document provides specifications for the Model 3030B4/B5 miniature, LIVM accelerometers, including: - A range of +/- 500 G for a +/- 5V output, with a sensitivity of 10.0 mV/G at 100 Hz for the 3030B4 and frequency responses of 2-10,000 Hz and 5-10,000 Hz respectively. - A resonant frequency of 30 kHz, discharge time constants of 0.5 sec for the 3030B4 and 0.1 sec for the 3030B5, and an equivalent electrical noise floor of 0.007 G RMS. - Additional specifications for linearity, output bias voltage, output impedance, transverse sensitivity, temperature

Uploaded by

Narendra Bhole
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
14 views

Port Preparation:: Outline/Installation Drawing, Model Series 3030B

This document provides specifications for the Model 3030B4/B5 miniature, LIVM accelerometers, including: - A range of +/- 500 G for a +/- 5V output, with a sensitivity of 10.0 mV/G at 100 Hz for the 3030B4 and frequency responses of 2-10,000 Hz and 5-10,000 Hz respectively. - A resonant frequency of 30 kHz, discharge time constants of 0.5 sec for the 3030B4 and 0.1 sec for the 3030B5, and an equivalent electrical noise floor of 0.007 G RMS. - Additional specifications for linearity, output bias voltage, output impedance, transverse sensitivity, temperature

Uploaded by

Narendra Bhole
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

.

408 REF

10-32 COAXIAL CONNECTOR

(.375 HEX)

.67 REF

10-32 UNF THREAD

.13 REF

.345 REF

PORT PREPARATION:
PREPARE FLAT SURFACE OVER .500 AREA.
AT CENTER DRILL #21( .159) X .25 DEEP MIN
BOTTOM TAP #10-32 UNF-2B X .150 DEEP MIN

INSTRUMENTS, INC.

CHATSWORTH, CA.

EXCEPT AS OTHERWISE NOTED


ALL DIMENSI0NS IN INCHES
TOLERANCE: .XXX =

3. MATERIAL: HOUSING & CONNECTOR 316L STAINLESS STEEL.


2. MOUNTING TORQUE - 15 LB.-IN.
1. WEIGHT - 6.8 GRAMS

SCALE
.XX=

.01

DATE

12/7/95

SURFACE FINISH
EXCEPT AS NOTED

DRAWN

BREAK EDGES TO DEBURR


RADIUS OR CHAMFER

APPROVED

THESE DIAS

FILLETS -

TO

MAX RAD.

CHECKED

N.C.

T.I.R.

REV

4X

DATE

PART NO.
MAT'L

N.C.
NEXT ASSEMBLY

6/23/98

ECN

TITLE

USED ON

SERIES 3030B
DWG NO.

OUTLINE/INSTALLATION DRAWING,
MODEL SERIES 3030B

127-3030B
SHEET

OF

SPECIFICATIONS
MODEL 3030B4/B5 MINIATURE, LIVM ACCELEROMETERS
SPECIFICATION

VALUE

UNITS

RANGE F.S. (FOR +/- 5V OUT)

+/- 500

SENSITIVITY, @ 100 Hz 1G RMS

10.0 +/- 5%

mV/G

FREQUENCY RESPONSE, 3030B4, +/- 5%


FREQUENCY RESPONSE, 3030B5, +/-5%

2 to 10,000
5 to 10,000

Hz
Hz

RESONANT FREQUENCY

30

kHz

DISCHARGE TIME CONSTANT, 3030B4, MIN


DISCHARGE TIME CONSTANT, 3030B5, MIN

0.5
0.1

SEC
SEC

EQUIV. ELECTRICAL NOISE FLOOR

.007

G,RMS

LINEARITY [1]

+/- 1

% FS

OUTPUT BIAS VOLTAGE, NOM

10

VDC

OUTPUT IMPEDANCE, NOM

100

OHMS

TRANSVERSE SENSITIVITY, MAX

TEMPERATURE RANGE

-60 to +250

DEG F

THERMAL COEFFICIENT OF SENSITIVITY

0.03

%/DEG F

MAX VIBRATION

1000

G,RMS

MAX SHOCK

3000

G,PEAK

SIZE, HEX X HEIGHT (NOT INCL STUD)

0.375 X 0.65

IN

WEIGHT

6.8

GRAMS

CONNECTOR, TOP MOUNTED

10-32

CASE MATERIAL

303

SEAL

WELDED/GLASS TO METAL

SUPPLY CURRENT (FROM CONSTANT


CURRENT SOURCE

2 to 20

COMPLIANCE VOLTAGE

+18 to +30

MOUNTING PROVISION

10-32 (UNF-2A)

NOTES:
[1] OVER ANY CALIBRATED LESSER RANGE WITHIN FULL SCALE RANGE LIMIT, BEST FIT STRAIGHT LINE METHOD.

MICRO COAX
STAINLESS STEEL
HERMETIC
mA
VDC
INTEGRAL STUD

You might also like