5G READY 40 MHZ 12.

4 GHz

RF & MICROWAVE ANTENNA TRAINING LAB MAT12

Features
*
320X240 pixel TFT Touch screen PLL Microwave
Transmitter, PLL Microwave Receiver 40 MHz-12.4 GHz.
*
1 KHz step size with measurement in 0.1 dB resolution
with 70
dB dynamic range.
*
Over 40 Antennas like Parabolic dish, Patch arrays,
Horns ,
Slots, Helices, Dipole, Monopole etc.
*
Directional Coupler, Slotted Line for VSWR/ Return Loss.
*
Stepper motor antenna rotator with 1 degree resolution.
*
USB interface with polar/cartesian plotting software.
*
All antenna gain, return loss and pattern plot provided.
*
10,000 location Frequency and level storage in receiver
1. PLL Synthesized Microwave Signal Generator MSG12

Technical Specifications

Mfd by: Amitec Electronics Ltd.

Regd. Off: 504, Nilgiri, 9 Barakhamba Road, New Delhi-110001, India,
Works: 4/32, Site-4, Industrial Estate Sahibabad, NCR-201010, India,
[email protected], www.amitec.co
+91-11-41505510, +91-120-4371276

Display
Frequency range
Step size
Modulation
Accuracy
RF Level
USB interface
Connector

:
:
:
:
:
:
:
:

320 X240 pixel TFT Touch Screen

40-12.4 GHz PLL synthesized
1KHz to 1GHz
ASK, FM
10ppm
0dBm typical
To PC for antenna plotting software
Gold plated SMA

2. PLL Synthesized Microwave Signal Analyser MSA12

5G READY 40 MHZ 12.4 GHz

RF & MICROWAVE ANTENNA TRAINING LAB MAT12

USB interface with polar plotting with log, linear cartesian and polar
plots, Vi, Vr & Return loss plots, Multiple pattern overlay, Double cursor,
Zoom, Colour editing, 1000 location editor, Absolute/Relative,
3dB/10dB beam-width, Gain, Front to back, Side lobe level and
position, Plot rotate, File- edit, save, get.

4. 5. Dual Ridge Horn- 2 Nos.

S11 : >15dB Typical
Bandwidth : 1 - 18 Ghz
Gain : 8.5dBi
Beamwidth : E plane 520
Beamwidth : H Plane 240
Polarisation : Linear

6. STEPPER MOTOR CONTROLLER SMC10

Display
Frequency range
Step size
Measurements
Resolution
USB interface
Connector
Motor Rotation
Motor Mode

:
:
:
:
:
:
:
:
:

Auto mode
Locations

:
:

320 X240 pixel TFT Touch Screen

40-12.4 GHz PLL synthesized
1KHz to 1GHz
RF level in dBm & 22 other units
0.1dB with a dynamic range of 70 dB
To PC for antenna plotting software
Gold plated SMA
0-359 degrees in 1 degree
Fully programmable start/end position,
Step Size, Forward step/dwell/stop time
Automatic rotation with receiver
10,000 location Frequency & Level storage

3. Antenna Plotting Software : Win 7 & 8 compatible

Mfd by: Amitec Electronics Ltd.

Regd. Off: 504, Nilgiri, 9 Barakhamba Road, New Delhi-110001, India,
Works: 4/32, Site-4, Industrial Estate Sahibabad, NCR-201010, India,
[email protected], www.amitec.co
+91-11-41505510, +91-120-4371276

Display : 320 X240 pixel TFT

Touch Screen
Motor Rotation : 0-359 degrees
in 1 degree
Motor Mode : Full programmable
start/end position,Step
Size,Forward step/dwell/stop
time, No of cycles
Auto mode : Automatic rotation
with receiver
Locations :10,000 location
Frequency and Level storage.
7. 8. Microwave absorber Panel- 2 Nos.
Absorber : EM Lossy PU Foam
Cones
Reflection : -40dB @10GHz
Fire retardancy : As Per NRL
USA-8093 Standard complying
Tests No.1,2 and 3 with zero
halogen means
Equivalent RCS : -30dBsm 840GHz

5G READY 40 MHZ 12.4 GHz

RF & MICROWAVE ANTENNA TRAINING LAB MAT12

9. Monopole
S11 : >6dB
Bandwidth : 10.3 + 0.5GHz
Gain : 1dB
Beamwidth : E plane 800
Beamwidth : H Plane 1800
Polarisation : Linear
Front to Back Ratio : 0dB
Substrate : Ceramic based
Connector : SMA

10. Dipole

14. Patch Microstrip circularly polarized

S11 : >10dB
Bandwidth : 10.3 + 0.1GHz
Gain : 4dB
Beamwidth : E plane 1200
Beamwidth : H Plane 1200
Polarisation : Circular
Front to Back Ratio : >10dB
Substrate : Ceramic based
Connector : SMA

15. Patch Microstrip

S11 : >6dB
Bandwidth : 10.3 + 0.5GHz
Gain : 2dB
Beamwidth : E plane 600
Beamwidth : H Plane 1800
Polarisation : Linear
Front to Back Ratio : 0dB
Substrate : Ceramic based
Connector : SMA

11. Yagi 4 element

S11 : >10dB
Bandwidth : 10.3 + 0.1GHz
Gain : 6dB
Beamwidth : E plane 1800
Beamwidth : H Plane 800
Polarisation : Linear
Front to Back Ratio : >10dB
Substrate : Ceramic based
Connector : SMA

16. Patch Microstrip Array 2x1

S11 : >10dB
Bandwidth : 10.3 + 0.1GHz
Gain : 6dB
Beamwidth : E plane 600
Beamwidth : H Plane 800
Polarisation : Linear
Front to Back Ratio : >10dB
Substrate : Ceramic based
Connector : SMA

12. Yagi 3 element

S11 : >10dB
Bandwidth : 10.3 + 0.1GHz
Gain : 6dB
Beamwidth : E plane 500
Beamwidth : H Plane 800
Polarisation : Linear
Front to Back Ratio : >10dB
Substrate : Ceramic based
Connector : SMA

17. Patch Microstrip Array 4x1

S11 : >10dB
Bandwidth : 10.3 + 0.1GHz
Gain : 5dB
Beamwidth : E plane 800
Beamwidth : H Plane 1000
Polarisation : Linear
Front to Back Ratio : >10dB
Substrate : Ceramic based
Connector : SMA

13.

Vivaldi

S11 : >10dB
Bandwidth : 10.3 + 0.1GHz
Gain : 10dB
Beamwidth : E plane 500
Beamwidth : H Plane 400
Polarisation : Linear
Front to Back Ratio : >10dB
Substrate : Ceramic based
Connector : SMA

18. Patch Microstrip Array 4x4

S11 : >6dB
Bandwidth : 10.3 + 2 GHz
Gain : 1dB
Beamwidth : E plane 800
Beamwidth : H Plane 1800
Polarisation : Linear
Front to Back Ratio : 0dB
Substrate : Ceramic based
Connector : SMA

Mfd by: Amitec Electronics Ltd.

Regd. Off: 504, Nilgiri, 9 Barakhamba Road, New Delhi-110001, India,
Works: 4/32, Site-4, Industrial Estate Sahibabad, NCR-201010, India,
[email protected], www.amitec.co
+91-11-41505510, +91-120-4371276

S11 : >10dB
Bandwidth : 10.3 + 0.1GHz
Gain : 11dB
Beamwidth : E plane 250
Beamwidth : H Plane 200
Polarisation : Linear
Front to Back Ratio : >10dB
Substrate : Ceramic based
Connector : SMA

5G READY 40 MHZ 12.4 GHz

RF & MICROWAVE ANTENNA TRAINING LAB MAT12

19. Parabolic Dish

25. Dielectric Rod

S11 : >10dB
Bandwidth : 10.3 + 0.5GHz
Directivity : 24dB
Beamwidth : E plane 100
Beamwidth : H Plane 200
Polarisation : Linear
Front to Back Ratio : 25dB
Diameter : 300mm
Weight : 500g

20. Conical Horn

S11 : >6dB
Bandwidth : 10.3 + 0.5GHz
Gain : 1dB
Beamwidth : E plane 500
Beamwidth : H Plane 600
Polarisation : Linear
Front to Back Ratio : 0dB
Connector : SMA

26. Slot WG broad wall

S11 : >6dB
Bandwidth : 8.2- 12.4
Gain : 10dB
Beamwidth : E plane
Beamwidth : H Plane
Polarisation : Linear
Connector : SMA

S11 : >10dB
Bandwidth : 10.3 + 0.1GHz
Gain : 4dB
Beamwidth : E plane 600
Beamwidth : H Plane 600
Polarisation : Linear
Front to Back Ratio : 10dB

GHz

21, 22. Pyramidal Horn- 2 Nos.

27. Slot WG narrow wall

S11 : >20dB
Bandwidth : 8.2- 12.4
GHz
Gain : 16dB
Beamwidth : E plane 200
Beamwidth : H Plane 220
Polarisation : Linear

23. E Plane Sectoral Horn

S11 : >10dB
Bandwidth : 10.3 + 0.1GHz
Gain : 4dB
Beamwidth : E plane 600
Beamwidth : H Plane 600
Polarisation : Linear
Front to Back Ratio : 10dB

28, 29.

Helix (RHCP) - 2 Nos

S11 : >15dB
Bandwidth : 8.2- 12.4
GHz
Gain : 13dB
Beamwidth : E plane 200
Beamwidth : H Plane 800
Polarisation : Linear

24. H Plane Sectoral Horn

S11 : >6dB
Bandwidth : 10.3 + 0.5GHz
Gain : 16dB
Beamwidth : E plane 400
Beamwidth : H Plane 400
Polarisation : Circular RH
Front to Back Ratio : >10dB
Connector : SMA

30, 31. Helix (LHCP) - 2 Nos

S11 : >15dB
Bandwidth : 8.2- 12.4
GHz
Gain : 10dB
Beamwidth : E plane 1000
Beamwidth : H Plane 220
Polarisation : Linear

Mfd by: Amitec Electronics Ltd.

Regd. Off: 504, Nilgiri, 9 Barakhamba Road, New Delhi-110001, India,
Works: 4/32, Site-4, Industrial Estate Sahibabad, NCR-201010, India,
[email protected], www.amitec.co
+91-11-41505510, +91-120-4371276

S11 : >6dB
Bandwidth : 10.3 + 0.5GHz
Gain : 16dB
Beamwidth : E plane 400
Beamwidth : H Plane 400
Polarisation : Circular LH
Front to Back Ratio : >10dB
Connector : SMA

5G READY 40 MHZ 12.4 GHz

RF & MICROWAVE ANTENNA TRAINING LAB MAT12

32. Microstrip Yagi

37. Microstrip Slot

Fc : 4 + 0.1 GHz
S11 : 10 + 2dB
Polarisation : Linear
Gain : 3dBi
Feed : Microstrip balun
Impedance : 50 Ohms
Connector : SMA
Substrate: Ceramic
Masking: Selective
Plating: Gold

33. Log Spiral

Fc : 4 + 1 GHz
S11: >10dB
Gain: 2dBi
Beamwidth : E plane 800
Beamwidth : H Plane 1200
Polarisation : Circular
Front to Back Ratio: 0dB
Connector : SMA
Substrate: Ceramic
Masking: Selective
Plating: Gold

Fc : 4 + 0.1 GHz
S11: >10dB
Gain: 2dBi
Beamwidth : E plane 600
Beamwidth : H Plane 1800
Polarisation : Linear
Front to Back Ratio: 0dB
Connector : SMA
Masking: Selective
Plating: Gold

38. Right Circularly Polarized Patch

Fc : 4 + 0.1 GHz
S11 : 10 + 2dB
Polarisation : RHCP
Gain : 3dBi
Impedance : 50 Ohms
Connector : SMA
Substrate: Ceramic
Masking: Selective
Plating: Gold

34. Microstrip Patch Transformer Fed

Fc : 4 + 0.1 GHz
S11 : 10 + 2dB
Polarisation : Linear
Gain : 5dBi
Impedance : 50 Ohms
Connector : SMA
Substrate: Ceramic
Masking: Selective
Plating: Gold

39. Left Circularly Polarized Patch

35. Microstrip Dipole

40. Spiral Slot

Fc : 4 + 0.1 GHz
S11 : 10 + 2dB
Polarisation : LHCP
Gain : 3dBi
Impedance : 50 Ohms
Connector : SMA
Substrate: Ceramic
Masking: Selective
Plating: Gold

Fc :4 + 0.1 GHz
S11 : 10 + 2dB
Polarisation : Linear
X Pol discrimination : 20dB
Gain : 2dBi
Feed: Microstrip balun
Impedance : 50 Ohms
Connector : SMA
Substrate: Ceramic
Masking: Selective
Plating: Gold
36. Microstrip Log Periodic Dipole Array
S11: >10dB
Bandwidth: 3-6GHz
Gain: 6dBi
Beamwidth : E plane 600
Beamwidth : H Plane 800
Polarisation : Linear
Front to Back Ratio: 6dB
Connector : SMA
Substrate: Ceramic
Masking: Selective
Plating: Gold

Mfd by: Amitec Electronics Ltd.

Regd. Off: 504, Nilgiri, 9 Barakhamba Road, New Delhi-110001, India,
Works: 4/32, Site-4, Industrial Estate Sahibabad, NCR-201010, India,
[email protected], www.amitec.co
+91-11-41505510, +91-120-4371276

Fc : 4 + 1 GHz
S11 : 10 + 2dB
Polarisation : Linear
Gain : 2dBi
Impedance : 50 Ohms
Connector : SMA
Substrate: Ceramic
Masking: Selective
Plating: Gold

41. Microstrip Circular Patch

Fc : 4 + 0.1 GHz
S11 : 10 + 2dB
Polarisation : Linear
Gain : 3dBi
Impedance : 50 Ohms
Connector : SMA
Substrate: Ceramic
Masking: Selective
Plating: Gold

5G READY 40 MHZ 12.4 GHz

RF & MICROWAVE ANTENNA TRAINING LAB MAT12

42. Folded Dipole

47. Loop
S11: >10dB
Bandwidth: 4 + 0.2GHz
Gain: 2dBi
Beamwidth : E plane 700
Beamwidth : H Plane 1800
Polarisation : Linear
Front to Back Ratio: 0dB
Connector : SMA
Substrate: Ceramic
Masking: Selective
Plating: Gold

43. Endfire Phased array

S11: >10dB
Bandwidth: 4 + 0.1GHz
Gain: 3dBi
Beamwidth : E plane 600
Beamwidth : H Plane 1200
Polarisation : Linear
Front to Back Ratio: 0dB
Connector : SMA
Substrate: Ceramic
Masking: Selective
Plating: Gold
44. Broadside phased array

S11: >10dB
Bandwidth: 4 + 0.1GHz
Gain: 2dBi
Beamwidth : E plane 700
Beamwidth : H Plane 1800
Polarisation : Linear
Front to Back Ratio: 0dB
Connector : SMA
Substrate: Ceramic
Masking: Selective
Plating: Gold
48. Coplanar waveguide CPW Bow tie Antenna
Fc : 4 + 0.1 GHz
S11 : 10 + 2dB
Polarisation : Linear
Gain : 2dBi
Impedance : 50 Ohms
Connector : SMA
Substrate: Ceramic
Masking: Selective
Plating: Gold

49. Rectangular Patch Array 2 X 2

S11: >10dB
Bandwidth: 4 + 0.1GHz
Gain: 3dBi
Beamwidth : E plane 600
Beamwidth : H Plane 1200
Polarisation : Linear
Front to Back Ratio: 0dB
Connector : SMA
Substrate: Ceramic
Masking: Selective
Plating: Gold

45. Microstrip Rectangular Patch

Fc : 4 + 0.1 GHz
S11 : 10 + 2dB
Polarisation : Linear
Gain : 8dBi
Impedance : 50 Ohms
Connector : SMA
Substrate: FR4
Masking: Selective
Plating: Gold

50. Dual Rectangular Patch

Fc : 4 + 0.1 GHz
S11 : 10 + 2dB
Polarisation : Linear
Gain : 5dBi
Impedance : 50 Ohms
Connector : SMA
Substrate: Ceramic
Masking: Selective
Plating: Gold

46. Monopole

Fc : 4 + 0.1 GHz
S11 : 10 + 2dB
Polarisation : Linear
Gain : 5dBi
Impedance : 50 Ohms
Connector : SMA
Substrate: FR4
Masking: Selective
Plating: Gold

51.Reference Logperiodic
S11: >10dB
Bandwidth: 4 + 0.2GHz
Gain: 1dBi
Beamwidth : E plane 700
Beamwidth : H Plane 1800
Polarisation : Linear
Front to Back Ratio: 0dB
Connector : SMA
Substrate: Ceramic
Masking: Selective
Plating: Gold

Mfd by: Amitec Electronics Ltd.

Regd. Off: 504, Nilgiri, 9 Barakhamba Road, New Delhi-110001, India,
Works: 4/32, Site-4, Industrial Estate Sahibabad, NCR-201010, India,
[email protected], www.amitec.co
+91-11-41505510, +91-120-4371276

S11: >10dB
Bandwidth: 1 to 6GHz
Gain: 4dBi
Beamwidth : E plane 600
Beamwidth : H Plane 1800
Polarisation : Linear
Front to Back Ratio: 10dB
Connector : SMA

5G READY 40 MHZ 12.4 GHz

RF & MICROWAVE ANTENNA TRAINING LAB MAT12

52. Series fed patch array

57. Directional Coupler

S11 : >6dB
Bandwidth : 4 + 0.3GHz
Gain : 4dBi
Beamwidth : E plane 400
Beamwidth : H Plane 400
Polarisation : Linear
Front to Back Ratio : >8dB
Connector : SMA

53. Leaky wave antenna

Bandwidth: 1 - 6 GHz
Insertion S12 : 1.5 + 0.5 dB
Coupling S13 : 20 + 2dB
Isolation S14: 20 + 2dB
Directivity S23: 15 + 3dB
Impedance : 50 Ohms
Connector : SMA
Usage: Antenna forward &
reverse power & VSWR
measurements.

58. Coaxial Slotted Line

S11 : >6dB
Bandwidth : 4 + 0.3GHz
Gain : 2dBi
Beamwidth : E plane 400
Beamwidth : H Plane 400
Polarisation : Linear
Front to Back Ratio : >8dB
Connector : SMA

S11: >15dB, S12: <1.5dB

Resolution: 0.05mm/ 0.15degree
at 1.5GHz
Coupling factor:-20dB
Connector : SMA
Residual VSWR : <1.2
Velocity propagation :
1.818X108m/s
Wavelength/3600 phase : 121mm
at 1.5GHz
Total Length : 200mm
50 Ohms Matched

54.Wideband Bow tie Dipole Antenna

Fc : 3 + 2 GHz
S11 : 10 + 2dB
Polarisation : Linear
Gain : 2dBi
Impedance : 50 Ohms
Connector : SMA
Substrate: Glass Epoxy
Masking: Selective
Plating: Selective Gold

59. Precision Slotted Line

55. Vivaldi( Planar Horn: Aperture Antenna)

S11 : >6dB
Bandwidth : 4 + 2 GHz
Gain : 1dBi
Beamwidth : E plane 800
Beamwidth : H Plane 1800
Polarisation : Linear
Front to Back Ratio : 0dB
Substrate : Ceramic based
Connector : SMA

60, 61, 62. Waveguide to Coax adapter - 3 Nos

S11 : 10dB
S12 : 1.5dB
Frequency : 8.2-12.4 GHz
Connector : SMA

56. Parabolic Dish ( Aperture Antenna)

S11: >10dB
Bandwidth: 4 + 0.1 GHz
Gain: 6dBi
Beamwidth : E plane 400
Beamwidth : H Plane 600
Polarisation : Linear
Front to Back Ratio: 10dB
Connector : SMA

63. Broadband Matched Termination

S11 : >25dB
Bandwidth : 8.2 -12.4 GHz
Waveguide Flange : Wr90

Mfd by: Amitec Electronics Ltd.

Regd. Off: 504, Nilgiri, 9 Barakhamba Road, New Delhi-110001, India,
Works: 4/32, Site-4, Industrial Estate Sahibabad, NCR-201010, India,
[email protected], www.amitec.co
+91-11-41505510, +91-120-4371276

S11 : >20dB
S12 : <1dB
Resolution : 0.05mm using
vernier
Coupling factor : - 20dB
Waveguide Flange : Wr90
Probe Connector : SMA

5G READY 40 MHZ 12.4 GHz

RF & MICROWAVE ANTENNA TRAINING LAB MAT12

64. Current Probe
Type: Loop, Magnetic Field
Rejection E/H: 30dB
Frequency: 1.5GHz upper
resonant
Sensitivity: High
Diameter: 1cm

65. Voltage Probe

Type: Directional, Electric
Rejection H/E: 30dB
Frequency: 3GHz upper
resonant
Sensitivity: Low
Size: 0.6cm

66. Multi Hole Directional Coupler

S41 Coupling : 10dB
S34 Directivity : 30dB
S21 Insertion Loss : <1.5dB
Bandwidth : 8.2 -12.4 GHz
Waveguide Flange : Wr90

67. Fixed short

Fixed Short
S11: >60dB

68. Accessories
Students activity manual,
Teachers reference manual,
M4X20 Screw & Nut, Screw
driver, Spanner, USB Lead,
RG316 cables, Attenuator, SMASMA adapter

Mfd by: Amitec Electronics Ltd.

Regd. Off: 504, Nilgiri, 9 Barakhamba Road, New Delhi-110001, India,
Works: 4/32, Site-4, Industrial Estate Sahibabad, NCR-201010, India,
[email protected], www.amitec.co
+91-11-41505510, +91-120-4371276

Areas of Experimentation and scope of study

1. Introduction
2. To plot the radiation pattern of an omnidirectional
antenna.
3. To plot the radiation pattern of a directional antenna
4. To measure axial ratio and cross polarisation
discrimination of vertically horizontally and circularly
polarized antennas.
5. To measure the VSWR of the antenna
6. To demonstrate that transmitting and receiving patterns of
an antenna are equal and hence confirm the reciprocity
theorem of antennas
7. To plot the radiation pattern (E & H Plane Polar &
Cartesian Plots on Log/Linear scale of an antenna on PC.
8. To measure the ANTENNA PARAMETERS (directivity,
gain, beam width (Half Power/10dB), front to back ratio,
plane of polarization, cross polarization discrimination,
side lobe level and its angular position from polar plot,
VSWR/return loss) of Dipole,
Folded dipole and
Planar Sleeve Dipole.9. To measure antenna parameters of Yagi.
10. To measure antenna parameters of Slot.
11. To measure antenna parameters of Transformer fed
Patch and
inset fed Patch.
12. To measure antenna parameters of right circularly polarized patch
and
left circularly polarized patch.
13. To measure antenna parameters of Spiral.
14. To measure antenna parameters of Spiral Slot.
15. To measure antenna parameters of Log Periodic.
16. To measure antenna parameters of Circular patch.
17. To measure antenna parameters of Folded Dipole.
18. To measure antenna parameters of Loop.
19. To measure antenna parameters of Endfire and
Broadside array.
20. To measure antenna parameters of Patch array 2X2, and Dual
Patch.21. To measure antenna parameters of monopole.
22. To measure antenna parameters at 10.3 GHz of Pyramidal Horn
(E plane Horn,
H plane Horn and
open waveguide antenna.
23. To measure antenna parameters at 10.3 GHz of conical Horn
antenna
24. To measure antenna parameters at 10.3 GHz of monopole
and Dipole antenna
25. To measure antenna parameters at 10.3 GHz of Slot Narrow Wall &
Broad Wall slot Antenna
26. To measure antenna parameters at 10.3 GHz of Parabolic dish
antenna
27. To measure antenna parameters at 10.3 GHz of Patch array 4X4
antenna.
Patch array 2X2 antenna
Dual Patch array antenna
Inset fed Patch antenna
Circularly Polarized Patch antenna
28. To measure antenna parameters of Helix RHCP &
Helix LHCP antenna.
29.To measure the cross polarization
discrimination for circular polarization.
E-Manual: Installation Video for ease of Learning
Dimension : 55X 45 X 36 cms.X 3
Weight : 45 Kg
Warranty: 3 yrs.