COLOR TFT-LCD TV

SERVICE MANUAL
MODEL : PDI-P23LCD

CAUTION !!
BEFORE SERVICING THE TFT-LCD TV,
READ THE SAFETY PRECAUTIONS IN THIS MANUAL.

PDI-P23LCD SERVICE MANUAL Document Number: PD196-093 Rev 1

 CONTENTS

Contents ------------------------------------------------------------------------- 2

Safety precautions ----------------------------------------------------------- 3

Servicing precautions ------------------------------------------------------- 4

Specifications ------------------------------------------------------------------ 5

Location of control ----------------------------------------------------------- 8

External input / output -------------------------------------------------------11

Inspection instructions ------------------------------------------------------12

Deassembly procedure ---------------------------------------------------- 13

Wire dressing ------------------------------------------------------------------ 21

Part appearance ---------------------------------------------------------------23

Trouble Shooting ------------------------------------------------------------- 25

Schematic Diagram -----------------------------------------------------------27

Block Diagram ----------------------------------------------------------------- 28

PCB Layout --------------------------------------------------------------------- 29

Wave form -----------------------------------------------------------------------34

Adjustment instruction with Default Factory Data----------------- 37

Packing instructions ---------------------------------------------------------39

Mechnical exploded view ---------------------------------------------------40

Replacement part list -------------------------------------------------------- 41

Circuit descriptions ---------------------------------------------------------- 47

PDI-P23LCD SERVICE MANUAL PAGE:2

 SAFETY PRECAUTIONS

!! Important Safety Notice !!

Many electrical and mechanical parts in this chassis have special safety-related
characteristics.
These parts are identified by in the Schematic Diagram and Replacement Parts List.
It is essential that these special safety parts should be replaced with the same components
as recommended in this manual to prevent Shock, Fire, or other Hazards.
Do not modify the original design without permission of manufacturer.

Leakage Current Hot Check (See below Figure)

Plug the AC cord directly into the AC outlet.
Do not use a line Isolation Transformer during this check.
Connect 1.5K/10watt resistor in parallel with a 0.15uF capacitor between a known good earth
ground (Water Pipe, Conduit, etc.) and the exposed metallic parts.
Measure the AC voltage across the resistor using AC voltmeter with 1000 ohms/volt or more
sensitivity.
Reverse plug of the AC cord into the AC outlet and repeat AC voltage measurements for each
exposed metallic part. Any voltage measured must not exceed 0.75 volt RMS, which is,
corresponds to 0.5mA.
In case any measurement is out of the limits specified, there is possibility of shock hazard and
the set must be checked and repaired before it is returned to the customer.

Leakage Current Hot Check circuit

PDI-P23LCD SERVICE MANUAL PAGE:3

 SERVICING PRECAUTIONS

CAUTION!!
Before servicing receivers covered by this service manual, read and follow the SAFETY
PRECAUTIONS on page 2 of this publication.

General Servicing Precautions

1.Always unplug the receiver AC power cord from AC power source before;
ⓐRemoving or reinstalling any component, circuit board module or any other receiver assembly.
ⓑDisconnecting or reconnecting any receiver electrical plug or other electrical connection.
ⓒConnecting a test substitute in parallel with an electrolytic capacitor in the receiver.
CAUTION!! A wrong part substitution or incorrect polarity installation of electrolytic capacitors
may result in an explosion harzard.
2.Do not spray chemicals on or near this receiver or any of its assemblies.
3.Do not defect any plug/socket voltage interlocks with which receivers covered by this service
manual might be equipped.
4.Always connect the test receiver ground lead to the receiver chassis ground before
connecting the test receiver positive lead. Always remove the test receiver ground lead last.
5.Do not connect the test fixture ground strap to power supply heatsink in this receiver

Electrostatically Sensitive(ES) Devices

Some semiconductor(solid state) devices can be damaged easily by static electricity. Such
components commonly are called Electrostatically Sensitive(ES) Device.Examples

Circuit Board Foil Repair

Excessive heat applied to the copper foil of any printed circuit board will weaken the adhesive
that bonds the foil to the circuit board causing the foil th separate from or “lift-off” the board.
The following guidelines and procedures should be flollowed whenever this condition is
encountered.

At IC Connections
To repair a defective copper pattern at IC connections use the following procedure to install a
jumper wire on the copper pattern side of the circuit board.(Use this technique only on IC
connections.)

1.Carefully remove the damaged copper pattern with a sharp knife.

(Remove only as much copper as absolutely necessary.)
2.Carefully scratch away the solder resist and acrylic coating(if used) from the end of the
remaining coopper pattern.
3.Bend a small “U” in one end of a small guage jumper wire and carefully crimp it around the
IC pin.
4.Route the jumper wire along the path of the out-away copper pattern and let it overlap the
previously scraped end of the good copper pattern. Solder the overlapped area and clip off
any excess jumper wire.

PDI-P23LCD SERVICE MANUAL PAGE:4

 SPECIFICATIONS
Note: Specifications and others are subject to change without notice for improvement.

1.Scope.
This document is the specification of 23” Hospital grade TFT-LCD Color TV.

2.Power
1) Power requirement
Input Frequency : 50/60㎐
Input Voltage: AC 100V ∼ AC 240V
Power consumption : Less than 140Watt.( Average: 95~100 Watt)

2) Power cord
Use UL listed hospital grade power cord

3.Tuning system
FS, 181 Channel

4.Sound output
10W+10Wrms Stereo (Max)

5.Antenna input impedance

VHF / UHF at 75ohm

6.OSD Type (On Screen Display)

Windows type (Center)

7.External in/output
PC ANALOG INPUT, PC DIGITAL INPUT, PC AUDIO INPUT, HEADPHONE OUTPUT,
COMPONENT 1 INPUT,COMPONENT2INPUT, S-VIDEO INPUT, TUNER,VIDEO OUTPUT
(Audio In : 0.4Vrms, over 10KΩ Video In : 1Vp-p, over 75Ω)

8. Function
CATV/Hyper band
Auto Program
Manual Program
Auto Sleep
Quick view
ACMS(Auto channel Memory System)
PSM(Picture Status memory)
SSM(Sound Status memory)
PIP : PC ANALOG, PC DIGITAL(Main) – TV, Component, Video, S-Video
ARC(ASPECT RATIO CONTROL): 16:9 / 14:9 / 4:3 / 16:9 zoom / 14:9 zoom / 4:3 zoom

PDI-P23LCD SERVICE MANUAL PAGE:5

 SPECIFICATIONS
9.Receiving RF TV system

NO PDI-P23LCD / /
Model System
1 PAL-B X / /
2 PAL-G X / /
3 PAL-I, I /I X / /
4 PAL-D X / /
5 PAL-K X / /
6 SECAM-B X / /
7 SECAM-G X / /
8 SECAM-D X / /
9 SECAM-K X / /
10 SECAM-K1 X / /
11 SECAM-I (6.0) X / /
12 NTSC-3.58 / 4.5 O / /
13 NTSC-3.58 / 5.5 X / /
14 NTSC-3.58 / 6.0 X / /
15 NTSC-3.58 / 6.5 X / /
16 NTSC-3.58 / 4.5(5.0) X / /
17 NTSC-4.43 / 5.5 X / /
18 NTSC-4.43 / 6.0 X / /
19 NTSC-4.43 / 6.5 X / /
20 PAL 5.5 / 60Hz X / /
21 PAL 6.0 / 60Hz X / /
22 PAL 6.5 / 60Hz X / /
23 SECAM 5.5 / 60Hz X / /
24 SECAM 6.0 / 60Hz X / /
25 SECAM 6.5 / 60Hz X / /
26 SECAM L / L' X / /
TOTAL SYSTEM 1 / /

PDI-P23LCD SERVICE MANUAL PAGE:6

 SPECIFICATIONS
10. PC Mode Scan Frequency & Timing
1)Scan Freq : H: 31 ∼ 61 kHz / V : 56 ∼ 75㎐
2)Preset Timing Chart

Horizontal Vertical
Mode Resolution
Frequency(KHz) Frequency(Hz)
640 x 480 31.5 KHz 60 Hz
VGA 640 x 480 37.9 KHz 72 Hz
640 x 480 37.5 KHz 75 Hz
800 x 600 35.1 KHz 56 Hz
800 x 600 37.9 KHz 60 Hz
SVGA
800 x 600 48.1 KHz 72 Hz
800 x 600 46.9 KHz 75 Hz
1024 x 768 48.4 KHz 60 Hz
XGA 1024 x 768 56.5 KHz 70 Hz
1024 x 768 60.0 KHz 75 Hz
1280 x 768 47.4 KHz 60Hz RB
WXGA 1280 x 768 47.8 KHz 60 Hz
1360 x 768 47.7 KHz 60 Hz
720 x 480p 31.5 KHz 60 Hz
DTV 1280 x 720p 45.0 KHz 60 Hz
1920 x 1080i 33.7 KHz 60 Hz
Note!! :
a. If the set is cold, there may be a small “flicker” when the set is switched on.
This is normal, there is nothing wrong with the set.
b. Some dot defects may appear on the screen, like Red,Green or Blue spots,
However, this will have no impact or effect on the monitor performance.
c. The resolution which is not supported will appear at the resolution which gets near to the resolution
which is supported.
*The standard of the resolution which gets near : H/V sync.
d.Press the Q.VIEW button to switch the 640x480 60hz to 720x480P 60Hz

11. TFT – LCD Panel Character

1) Feature
Size :23”
LCD Type :Color Active Matrix TFT
Pixel Pitch :0.372 mm(H) x 0.372 mm(V)
Pixel Format :1366x768 Pixels, RGB Stripe
Active Video Area :508.125mm(H) x 285.696mm(V)
Surface treatment :Haze 44% , Hard coating(3H)
Response Time(Typ) :25mS(Typ)
Viewing Angle<CR≥10> : Hor [Left/Right] Æ 89Deg (Typ) / 89Deg (Typ),
Ver [High(Top)/Low(Bottom)] Æ 89Deg (Typ) / 89Deg (Typ)
Luminance(Typ) : 450 cd/㎡(Typ)
Contrast Ratio(Typ) : 1200(Typ)
Display Color : 16,777,216 Color - True
Back Light : 6 CCFL – U Type

PDI-P23LCD SERVICE MANUAL PAGE:7

 LOCATION OF CONTROL
All the function can be controlled with the remote controller.
Some functions can also adjusted with the buttons on the controls on the TV front panel.

12. Remote controller

Note !! : Before you use the remote controller, please install the batteries.

1.POWER:
Turns the TV on from standby or off
to standby mode.

2.MUTE:
Turns the sound on and off

3.NUMBER buttons: Select channel numbers.

4.PSM (Picture Status Memory):

Recalls your preferred picture setting.

5.SSM (Sound Status Memory):

Recalls your preferred sound setting.

6. SAP:
Adjusts the MTS-STEREO,MONO,SAP

7.MENU: Displays a main menu.

8.TV / AV: Selects input signal source./ Clears the

menu from the screen.

9.OK:
Accepts your selection or displays the
current mode.

10.CH S / T (Channel Up/Down):

Selects next channel or a OSD menu item.

11.VOL ◀/▶ (Volume Up/Down)

Adjusts the sound level. Adjusts menu settings.

12.SLEEP: Sets the sleep timer.

13.TV / PC : Selects TV or PC mode directly.

14.CC: Sets the caption function.

15.LIST: Displays the channel list menu.

16.Q.VIEW:
Returns to the previously viewed channel.

PDI-P23LCD SERVICE MANUAL PAGE:8

 LOCATION OF CONTROL

17.ARC You can watch TV in various picture

formats; 16:9, 14:9, 4:3, 16:9 Zoom, 14:9 Zoom,
4:3 Zoom. Repeatedly press the ARC button to
select your desired picture format. Note: In PC
mode only 16:9 and 4:3 sized displays available.

18. INPUT:
Selecs the AV source for sub picture in PIP mode.

19.PIP:
Displays a PIP(Picture In Picture) screen.
The PIP function is available except 480i signal in
COMPONENT1 and COMPONENT2 mode.

20. ▲CH▼:
Selects a channel when TV signal is displayed
in PIP window mode.

21.POSITION:
Selects a position of PIP screen.

22. SWAP:
Switches a main picture for sub picture in PIP
mode. The PIP screen will disappear after
pressing the SWAP button.

22. MODE:
Selects a PIP screen size – 16:1, 9:1 and 3:1
mode.

PDI-P23LCD SERVICE MANUAL PAGE:9

 LOCATION OF CONTROL

13. Controller of Panel

1. ON/OFF: Switches TV set on or off.

2. MENU : Displays menu.

3~4. CH▲ / ▼: (Channel Up/Down) Selects a channel or a menu item.

5~6. VOL▲ / ▼ (Volume Up/Down) Adjusts the volume or menu settings.

7. TV/AV Selects TV, VIDEO, S-VIDEO, RADIO(Only when

the Radio is set on), PC Analog, PC Digital, COMPONENT1 or COMPONENT2 mode.
Clears the menu from the screen.

8. Remote control sensor Accepts the IR signal of remote controller.

9. Power Indicator IIIuminates in red when the TV is OFF. IIIuminates in green when the
TV is ON. IIIuminates in amber when the power save mode is active (only PC mode).

PDI-P23LCD SERVICE MANUAL PAGE:10

 EXTERNAL IN/OUT
14.External IN / OUT

1. PC DIGITAL IN (DVI-D) : Connect the DVI from PC.

2. PC ANALOG IN (D-SUB) Connect the 15pin D-SUB from PC.
3. AV OUT: Connect these outputs to the Audio/Video inputs of extemal equipment.
4. AV IN: Connect the Audio/Video outputs of extemal equipment to these inputs.
5. COMPONENT2 IN: Connect the Y, Pb, Pr signal from DVD or Set Top Box.
6. COMPONENT1 IN: Connect the Y, Pb, Pr signal from DVD or Set Top Box.
7. S-VIDEO IN: Connect the output of the S-VIDEO(Y,C) on the VCR to the S-VIDEO inout.
Connect the audio outputs of the S-VIDEO on the VCR to the Audio IN L(MONO),R
8. PC AUDIO IN: Connect the audio cable from the PC to the OC AUDIO IN of the set.
9. AC INLET: Connect the power cable from wall.
10.PILLOW: Pillow Speaker Port.
11. COMM: CCI/Cloner Comm Port.
12. SPK: On Off switch for the intemal TV speakers and H/P jack.

PDI-P23LCD SERVICE MANUAL PAGE:11

 INSPECTION INSTRUCTION
1. Supplied Accessories

Note: Make Sure the following accessories are provided with Product.

1. AC Code 2. Owner’s manual

..

3.Mounting Brackets &Hardware 4. Pillow Speaker Jumper

(Not included with the “-NB” model) (Not included with the “-NB” model)

PDI-P23LCD SERVICE MANUAL PAGE:12

 DEASSEMBLY PROCEDURE
16. Disassembly procedure

1)Removal of Stand
emoe 4 screws Remove 4 screws Remove 4 screws Remove 4 screws Remove 4 screws
Remove 4 screws Remove 4 screws Remove 4 screws Remove 4 screws Remove 4 screws

Remove 4 screws

2)Removal of Back cover,

(First removal side cover)

Remove 11 screws

PDI-P23LCD SERVICE MANUAL PAGE:13

 DEASSEMBLY PROCEDURE
3)Metal plate & Rear chassis

Remove 8 screws

4)Remove bracket

Remove 4 screws

오류!

PDI-P23LCD SERVICE MANUAL PAGE:14

 DEASSEMBLY PROCEDURE
5) Disconnect 8 plugs on Main PCB

Remove 8 connector

6) Remove 12 Main & SMPS PCB screws

Remove 11 screws

PDI-P23LCD SERVICE MANUAL PAGE:15

 DEASSEMBLY PROCEDURE

7-1)Removal of LCD module

Remove 8 screws

7-2)Removal of LCD module

Remove 10 screws

PDI-P23LCD SERVICE MANUAL PAGE:16

 DEASSEMBLY PROCEDURE

7-3)Removal of LCD module

After remove front shield

PDI-P23LCD SERVICE MANUAL PAGE:17

 DEASSEMBLY PROCEDURE
7-4) Removal of LCD module

Remove 2 screws

PDI-P23LCD SERVICE MANUAL PAGE:18

 DEASSEMBLY PROCEDURE

7-5) Removal of LCD module

Remove 2 screws

PDI-P23LCD SERVICE MANUAL PAGE:19

 DEASSEMBLY PROCEDURE

7-6)Removal of LCD Module

Front cover remains after removing LCD Module

PDI-P23LCD SERVICE MANUAL PAGE:20

 WIRE DRESSING
1. Wire Dressing

Note: Using acetate Tape

PDI-P23LCD SERVICE MANUAL PAGE:21

 WIRE DRESSING
1) Wire Dressing for speaker & Key control. ( No.1, acetate Tape)
2) Wire Dressing for Left speaker & Key control. ( No.2 acetate Tape)
3) Wire Dressing for Right speaker & Key control. ( No.3, acetate Tape)

499-004A : 3EA
TAPE, ACETATE

2 3

PDI-P23LCD SERVICE MANUAL PAGE:22

 PART APPEARANCE
1.Part appearance

A1504S C102S
C3875S

Regulator for Tuning Voltage

C3198 2N7000

LC33V or LD33V (LD1117) AP1501

EEPROM 24C16W ,24C02W

TTL LOGOC IC 74F08

PDI-P23LCD SERVICE MANUAL PAGE:23

 PART APPEARANCE
1-1. Part appearance

Voltage Reg Voltage Reg

Voltage Detector
Voltage Detector KIA78L05F KIA78L09F
KIA7042AF
KIA7027AF

Schottky Rectifier B340

TTL LOGIC IC 74F08

PDI-P23LCD SERVICE MANUAL PAGE:24

 TROUBLE SHOOTING
15.Troble shooting

15-1.No Raster

P803 (pin8~15) : 24V

Y Y
(B/Light Vcc) Check P303 Replace LCD Panel.
P803 (pin1) : 5V (pin26~30) : 12V
(B/L ON:5V / Off:0V)
N N
Check FET Check Y
Replace
Q804 (pin source) IC805 (pin1) : 12V
24V IC805 (pin4) : 0V
IC805

Y N

Replace Replace
Q804 N IC801 / ZD804

Replace the internal

SMPS power or
AC power

PDI-P23LCD SERVICE MANUAL PAGE:25

 TROUBLE SHOOTING
15-2. No Sound &
Picture OK

IC601(pin10)
Y IC601(pin8) Y Check Y Check
= High=mute SW751
= VCC24V Volume
= Low = on

N N N N
IC101
Check Swich Off Volume UP
(pin123,124 L/R)
Another VCC Line
Q104/105(Emmit
or)Sound Wave

Replace IC101

15-3. No Operation

No LED LED blinking

Y Y Y
Resistance:0 ohm IC01(pin69~75)
IC804 (pin4) <-> Check ScalerCommuni
GND All SCL/SDA cation Lines)
Y SignalLevel = 3.3V
= 3.3V
Replace N N
IC804 / D850
Replace
IC101 Replace IC01

PDI-P23LCD SERVICE MANUAL PAGE:26

 Schematic Diagram

PDI-P23LCD SERVICE MANUAL PAGE:27

 BLOCK DIAGRAM
1. Block Diagram

23F/26H/27K Block Diagram

SPEAKER
I LCD PANEL
N VCC 24V
V AMP
E On/off
Power HEADPHONE
R Dimming PANEL DRIVE
(Inverter/Scaler/
control LVDS
T ADC/VCTI)
L/R
V
E
C
T
I H/P AMP
R I
T
U
R
G L/R
VCC 24V - B
6 ,
H
Power 5 S
IC01 IC101 VCTI
,
IIC
6 V
S
SCALER u-Com
DVI Receiver ADC TEXT/Caption Power
ADC Video Processor IIC
PIP Sound Processor
De-Interlacer IF Processor

Power
IIC A R A Y Y I
F
Y V G V P C
P - B - b
DC-IN b I
N , I
N P
P / F / R
24V
D r O B O (
V P ( D
I C D U U V
- - - T T D
R R T )
G G V
)
B B

DC-IN DVI-RGB PC-RGB Y, Pb, Pr AV-IN/OUT YC IF

(Y, Cb, Cr)

DC-IN DVI D-SUB YPbPr(DVD) AV-IN/OUT S-VIDEO TUNER

YPbPr(D-TV)

PDI-P23LCD SERVICE MANUAL PAGE:28

 PCB LAYOUT
1. CONTROL PCB & PILLOW JACK PCB

1-1.Pillow PCB 1-2.Control PCB

(Top pattern) (Top silk) (Bottom pattern) (Bottom silk)

(Top pattern) (Top silk)

(Bottom pattern) (Bottom silk)

PDI-P23LCD SERVICE MANUAL PAGE:29

 PCB LAYOUT
2. Main PCB ( TOP PATTERN )

PDI-P23LCD SERVICE MANUAL PAGE:30

 PCB LAYOUT
3. Main PCB (TOP SILK)

PDI-P23LCD SERVICE MANUAL PAGE:31

 PCB LAYOUT
4. Main PCB ( BOTTOM PATTERN )

PDI-P23LCD SERVICE MANUAL PAGE:32

 PCB LAYOUT
4. Main PCB ( BOTTOM SILK)

PDI-P23LCD SERVICE MANUAL PAGE:33

 WAVE FORM
NOTE!!:ⓐVideo = Gray scale pattern input / Audio = 1Khz input at volume step 20~40.

1)Component Y input, (L207 & R560 MEASURE) 2)Component Cb input, (L208 & R262 MEASURE)
(1V-p-p, Input = Vertical color pattern) (0.7V-p-p, Input = Vertical color pattern)

3) Component Cr input, (L209 & R265 MEASURE)

(0.7V-p-p, Input = Vertical color pattern) 4) S-video C signal input. (C236 MEASURE)

5) S-video Y signal input.(15.7Khz,1Vp-p) 6) CVBS Video signal input.(15.7Khz,1Vp-p)

(R519 MEASURE) (R280 MEASURE)

PDI-P23LCD SERVICE MANUAL PAGE:34

 WAVE FORM
NOTE!!: Video = Gray scale pattern input / Audio = 1Khz input at volume step 40.

7) CVBS Video signal output.(15.7Khz,1Vp-p) 8) Q105 Emitter (Audio “L” output)

(R279 MEASURE)

9) Q104 Emitter (Audio “R” output) 10)R132 IR signal input to u-computer.

13) Tuner 33V input (about 32V~34V) 16) C610 & C612 Power AMP Audio L,R output

PDI-P23LCD SERVICE MANUAL PAGE:35

 WAVE FORM
NOTE!!: PC INPUT = 640x480 @ 60Hz Cross hatch pattern.

29) PC-DSUB Hsync input 28) PC D-SUB Vsync input

(R705 MEASURE) (R740 MEASURE)

PDI-P23LCD SERVICE MANUAL PAGE:36

 ADJUSTMENT INSTRUCTION
WITH DEFAULT FACTORY DATA
1.SVC mode data Adjustment
NOTE!! When the EEPROM has been replaced, the SVC data should be restored as the
function of individual system and specification.
When the EEPROM has been replaced White Blance Checking.

[ Enter and exit SVC mode ]

Note: into the SVC mode, Initialize with default data.
1) Press 5 Seconds MENU buttons on both TV set and Remote Controller at the same
time to get into SVC mode.
2) Press the PR ▲▼ button several times to find SVC Data.
3) Input the corresponding SVC data referring to Table below with the VOL ◀▶, key.
4) Press TV/AV button to exit SVC mode
1-1. Factory outgoing setting & Initialize with default data (into the SVC mode)]
Main menu Change value Sub menu Change value
(Model) (M)
Language Option NORTH AME 3EA
TV White Balance
(TV White Balance) Settings ALL
Sub-menu
Start
PC Yes
Option 1
Option 1 System M USA
Sub-menu
China/Australia No
AV1 YUV1
Text EAST EU1
Top No
VPS/PDC No
Data Service Caption
ATS Delay Time 60
Game No
DVI Yes
DTV Yes
QURAN No
Audio Options
Audio Options M + 42
Sub-menu
BG/I/DK + 21
NICAM + 26
FM Radio + 10
Scart Volume + 118
Surround 0
Mute if no carrier No
High Deviation No
DUAL No
MONO No
STEREO Yes
(DRX) (Sub-menu)
(NVM Edit) (Sub-menu)
(Hotel Option) (Sub-menu)
(Reset TV-set) (Sub-menu)
Warning: Do not adjust the “( )” item…
PDI-P23LCD SERVICE MANUAL PAGE:37
 ADJUSTMENT INSTRUCTION
WITH DEFAULT FACTORY DATA

2. White Blance Checking

1.RF when it presses a SVC height from the screen 2. Option1 3. It presses the Menu of the remote control
, with the SVC Mode Main screen movement System : M USA , with the SVC Mode Main screen movement
- Panel23 : SSLTA230W1L02 Text : EAST EU1
- Language Options : NORTH AME 3EA
- Model : M

4. TV White Balance Setting 5. TV White Balance Setting 6.Completion of white balance setting 7.SVC Mode Settingfinish The TV/AV bu
: All Start

PDI-P23LCD SERVICE MANUAL PAGE:38

 PACKING INSTRUCTION
NO P ART NO DE S CRI P T I O N M AT E RKAL CO L O R Q 'T Y
1 - 23" LCD CO LO R T V - - 1
2 321-008A B A G P A CK I NG PE - 1
3 310-025E , F P A CK I NG L, R EPS W HI T E 1
4 300-011W B O X CA RT O N PAPER - 1
5 - A CCE S S O RY - - 1
6 499-002A T APE O PP 70m m - 3000m m

M AT ER IAL D AT A T IT LE
2005. 09. 13
S E T P a c k in g E x p lo d e d D ra wg
T H IS EN G R
D . H . KIM D R AW IN G N O .
T R EAT M EN T GH K
MA 0 5 - 0 1 7
M O D EL APPD SC ALE SH EET
LT 23Q 5LF - 1/1

PDI-P23LCD SERVICE MANUAL PAGE:39

 MECHANICAL EXPLODED VIEW
1. Explode View
NO PART NO DESCRIPTION MATERIAL COLOR Q'TY
1 610-005C SPEAKER 5W, 8Ω - 2
2 400-002E FRONT COVER ABS SILVER 1
3 404-001B BLOCK KNOB ABS SILVER 1
4 408-002J LENS SENSOR PC TRANSPARENCE 1
5 AYMALT41-103 CONTROL PCB ASS'Y 1
6 PANLT230W010 PANEL SAMSUNG 1
7 407-006F SHIELD SUPPORT EGI 2
8 407-011E SHIELD FRONT EGI 1 20
9 407-007C SHIELD BRKT EGI 1 26
10 AYMALT41-401 MAIN PCB ASS'Y PAL/SECAM 1
11 620-005G AC/DC ADAPTER INTERNAL SMPS 1
12 407-007D SHIELD REAR EGI 1
19
13 407-006K SHIELD JACK SPTH SILVER 1
31
14 450-006K REAR PLATE (D-SUB) PVC BLACK 1
15 AYMALT41-202 ISP PCB ASS'Y 1
15
16 AYMALT41-203 SIDE PCB ASS'Y 1
21
17 401-003T SIDE COVER ABS DARK GRAY 1 14
18 450-007B SIDE PLATE PVC BLACK 1 13
19 401-004K BACK COVER ABS DARK GRAY 1
12
20 450-006U REAR PLATE (SCART) PVC BLACK 1

21 450-007C REAR PLATE (ISP,COMM) PVC BLACK 1

31
22 402-001S STAND BASE ABS DARK GRAY 1
23 401-003V BRKT STAND EGI 1 11
24 401-003U BRKT BOTTOM EGI 1
31
25 496-001U RUBBER FOOT Ø20, 1.0t BLACK 4
26 410-001Q BTB 4*12 SZN 29
32
27 410-001L TTB 3*10 SZN 5
SCREW TAPPING
28 410-008D FHTTB 4*25 SZN 4 26
29 410-008C FHTTB 4*8 SNI 6
30 410-008E FHM 4*8 SZN 8
31 410-001N SCREW MACHINE FTB 3*6 SZN 29
32 410-001R PB 4*8 SZN 8

18
17
16
31

22
28
31
10
30
8 23
9 24
31 25

7 29
31
26
6
27
MATERIAL DATA TITLE
5
4 2005. 09. 13
THIS ENGR
SET Exploded Draw ing
2
1 D. H. KIM DRAWING NO.
26 TREATMENT GHK
3
MA05-016
MODEL APPD SCALE SHEET
PDI-P23LCD
LT23Q5LF - 1/1

PDI-P23LCD SERVICE MANUAL PAGE:40

 REPLACEMENT PART LIST
1.Parts List (Assemble process)

LEVEL PART NO PART NAME DESCRIPTION Q,TY

1 300-003J 201/23 F MODEL 공용 BOX, ACCESSORY 1
1 300-011B 23F/N COM,NO SPEC BOX, GIFT 1
1 310-014A 23" F/N MODEL COMMON PACKING, LEFT 1
1 310-014B 23" F/N MODEL COMMON PACKING, RIGHT 1
1 320-001A ACCESSORY PACKING BAG, VINYL 1
1 321-008A 23 SET PACKING BAG, PACKING 1
1 404-004A F/N, L/KEY,Chromium BLOCK KNOB 1
1 407-004F 23,FIX BRKT,4-03-006 FIX BRKT 4
1 407-004X VCTI-23F,SHIELD JACK SHIELD, JACK(SCART) 1
1 407-004Z VCTI-23F,SHIELD REAR SHIELD, REAR 1
1 407-005E VCTI-23F,LG/IPS SHIELD, FRONT 1
1 410-001K TTB 3*8 SCREW 6
1 410-001L TTB 3*10 SCREW 9
1 410-001N FTB 3*6 SCREW 16
1 410-001Q BTB 4*12 SCREW 16
1 410-002R PP 4*12 SCREW 4
1 410-002Z PB 3*10 SCREW 4
1 499-002A W:70mm TAPE, OPP 3000
1 500-022M 23FLF,4LANG,DIBOSS OWNERS MANUAL 1
1 501-001B ENGLISH LABEL, WARNING 1
1 501-0030 원자재, SILVER/BLACK LABEL, SERIAL 1
1 501-017D 23"DIBOSS 34mm STICKER, LOGO 1
1 501-102L LT-23FLF,NEW DIBOSS LABEL, ID 1
1 502-0010 ALL MODEL LABEL, BOX ID 1
1 509-011W D.BOSS (wing),93mm LABEL, BRAND 2
1 510-004A 30.1",EU,(PR) REMOCON(유럽향) 1
1 507-001A PANEL FILM FIX LABEL, PROTECTIVE 4
1 520-001A 1.5V, AAA SIZE BATTERY 2
1 610-005C 5W, 8 OHM SPEAKER 2
1 620-004C 24V, 5.42A, 1.8M AC/DC ADAPTER 1
1 621-001G 220V,SWISS,KKP-4819S POWER CORD 1
1 626-001A IVORY, 1.8M, 15-PIN CABLE, PC RGB 1
1 627-001A 1.8M, BK CABLE, PC-SOUND 1
1 CON05P200ABH 301 LED,5P 200MM H/H LEAD ASSY(SENSOR) 1
1 CON02P200A0S 2627,SPK,2P,600MM LEAD ASSY(SPK) 1
1 CON03P200A01 2627,SPK,3P,600MM LEAD ASSY(SPK) 1
1 CON07P200AD3 27K,7P-10P,1000 CTRL LEAD ASSY(CTRL) 1
1 CON12P200ACF 23,INVETE,12P 160MM LEAD ASSY(INV) 1
1 CON20P125ADH 23,Panel,20P,200MM LEAD ASSY(LVDS) 1
1 PANLC230W010 23", LC230W01-A2-A PANEL, LCD COLOR 1
1 AYBCLT23B01A VCTI23,F-MODEL,SCART REAR, COVER ASSY 1
1 AYCALT23A01A 23", F-MODEL, (PR) CABINET ASSY 1
1 AYSTLT23A01A 23" F-MODEL STAND ASSY 1
1 AYMALT41F01A 23F,VCT-I,SCART MAIN PCB ASSY 1
1 AYCOLT40A01A VCTI N/F CONTROL CONTROL PCB ASSY 1

PDI-P23LCD SERVICE MANUAL PAGE:41

 REPLACEMENT PART LIST
2. Parts List (Main PCB)
LEVEL PART NO PART NAME DESCRIPTIONS LOCATION NO
0 AYMALT41F01A MAIN PCB ASS'Y LT-23FLF
1 GRLT41DM001B GR, SCART MANUAL
2 0JASCART000D JACK, SCART RGB21PIN,VP 381-091B J401,J403
1 GRLT41DA001B GR, SCART AUTO
2 0CESS100CMTR CESSL1C100M0511AD Capacitor, AL.E 10UF 16V C240,C241
2 0CESS220CMTR CESSL1C220M0511AD Capacitor, AL.E 22UF 16V C207,C208
1 GRLT41DS001B GR, SCART SMD
2 0CHSS080DCTS 8P Capacitor, chip 8PF C202
2 0CHSS101DJTS CL10C101JBNC Capacitor, chip 100PF C203,C212,C214
2 0CHSS104DZTS CL10F104ZANC Capacitor, chip 0.1UF C242
2 0CHSS471DJTS CL10C471JBNC Capacitor, chip 470PF C209,C210
2 0LHSS120EJTS INDUCTOR, CHIP 12UH, 2012 L205,L206,L202
2 0RHSS000DJTS RC1608J000CS Resistor, chip 0 ohm R231,R269,R271,R272
2 0RHSS102DJTS RC1608J102CS Resistor, chip 1K R210
2 0DHKEKDS226S KDS226, DIODE Diode, chip KDS226 D252
2 0RHSS103DJTS RC1608J103CS Resistor, chip 10K ohm R243
2 0RHSS182DJTS RC1608J182CS Resistor, chip 1.8K ohm R240
2 0RHSS220DJTS RC1608J220CS Resistor, chip 22 ohm R211,R212,R213
2 0RHSS273DJTS RC1608J273CS Resistor, chip 27K R242
2 0RHSS393DJTS RC1608J393CS Resistor, chip 39K ohm R219
2 0RHSS471DJTS RC1608J471CS Resistor, chip 470 ohm R205,R241
2 0RHSS513DJTS RC1608J513CS Resistor, chip 51K R220
R206,R208,R209,R214
2 0RHSS750DJTS RC1608J750CS Resistor, chip 75 ohm
R215,R216
2 0RHSS821DJTS RC1608J821CS Resistor, chip 820 ohm R244
2 0TRKE1504STS KTA1504S Y Transistor, chip A1504 Q201
2 0TRKE3875STS C3875 Transistor, chip C3875 Q202
ZD201,ZD203,ZD204,ZD206
2 1DZSC5231BTS MMSZ5231BS Zener diode, chip 5.1V
ZD208
1 GRLT41DM001A GR, COMMON MANUAL
2 0CESH471FHBD CAPACITOR, ELEC. 470UF 35V, 105도 C613
C832,C837,C851,C610
2 0CESH471FMBD CAPACITOR, ELEC. 470UF 35V
C612,C827,C836,C850
2 0ISSY32P00BD SOCKET, IC DIP 32P IC109
2 1ICSY49F040D IC, MICOM ATMEL AT49F040 IC109
2 0ICKE78080AD KIA7808AP IC, KIA7808 IC800
2 0JADM15RF00D JACK, D-SUB DAH-15RF-4B4 J202
2 0JAGE14060BD JACK, SOUND RCA-1406(W/R) 2열 J405
2 0JAKKST215BD ST-215 Jack, PC-AUDIO J601,J602
2 0JAPK6046GBD S-VHS, PJ6046G JACK, S-VHS J406
2 0JASYDC4P0BD JACK, DC-POWER 4P POWER J801
2 0JASYDVI29BD JACK, DVI-CON DVI-CON J201
2 0LRSM00100BD SMC103 Inductor, 1MH L802
2 0XTKI143180D CRYSTAL, RADIAL 14.318MHZ X01
2 0XTKI202500D CRYSTAL, RADIAL Crystal, 20.25MHZ X100
2 AYHSAP1501BD AP1501A-50T5,25*16 HEAT SINK ASSY IC804
2 1ICIPAP5T5TD IC, DC/DC CONVERTER AP1501A-50T5,5V,5A
2 410-001J PB 3*8 SCREW
2 420-001F 15*25 HEAT SINK(25mm)
2 498-001A Silicon Grease
2 AYHSLA4282IB LA4282, 42*16 HEAT SINK ASSY IC601
2 1ICSA42820AD LA4282, SANYO IC, SOUND AMP
2 410-001J PB 3*8 SCREW
2 420-001A LA4282 42*16 HEAT SINK
2 498-001A Silicon Grease
2 WAFLG04250SD GIL-G-4P-S3T2 Pin wafer, 4-PIN P110,P101
2 WAFML07200AD 53015-0710 Wafer, 7-PIN P111
2 WAFYH02200SD SMW200-02 Pin wafer, 2-PIN P601
2 WAFYH03200SD SMW200-03 Pin wafer, 3-PIN P602
2 WAFYH10200SD WAFER, PIN 10P, P2.0mm STRAIGHT P115

PDI-P23LCD SERVICE MANUAL PAGE:42

 REPLACEMENT PART LIST
3. Parts List (Main PCB)
LEVEL PART NO PART NAME DESCRIPTIONS LOCATION NO
1 GRLT41DA001A GR, COMMON AUTO
C108,C173,C174,C216,C2
19
2 0CESS100HMTR CAPACITOR, ELEC. 10UF 50V
C239,C253,C254,C80,C81
C82,C83,C84,C86,C87
C01,C601,C603,C607,C61
2 0CESS101CMTR CAPACITOR, ELEC. Capacitor, 100UF 16V
7
2 0CESS101EMTR CAPACITOR, ELEC. 100UF 25V C839
2 0CESS010HMTR 1UF 50V CAPACITOR, ELEC. C618
2 0CESS220CMTR CESSL1C220M0511AD Capacitor, 22UF 16V C534,C222,C227
2 0CESS221AMTR CAPACITOR, ELEC. 220UF 10V C175,C190
C178,C179,C187,C602,C6
2 0CESS2R2HMTR CAPACITOR, ELEC. Capacitor, 2.2UF 50V
06
2 0CESS3R3HMTR CAPACITOR, ELEC. Capacitor, 3.3UF 50V C165
C121,C151,C251,C535,C8
2 0CESS470CMTR CESSL1C470M0511AD Capacitor, 47UF 16V 44
C160,C169,C170,C185,C3
2 0CESS470FMTR CAPACITOR, ELEC. 47UF 35V C614
2 0CESS4R7HMTR 0CESS4R7HMTR Capacitor, 4.7UF 50V C106,C197,C807,C858,C859
2 0CQSS104KKTR CAPACITOR, MYLER 0.1UF 100V C608,C609,C611,C806,C817
2 0CQSS682KKTR CAPACITOR, MYLER 0.0068UF 100V C604,C605
2 0LBSS3580RTR BFD-3580R2F Bead, radial 1UH L807,L808
L102,L150,L160,L167,L168
2 0LRSU220KKTR INDUCTOR 22U/RAD,5MM RADIAL L171,L172,L173,L175,L176
L177,L198,L199
2 0RNSS391FFTA Resistor, Axial 390 ohm 1/6W, 1% R48
2 1DDSKEU1Z0TA DIODE, RECTIFIER FAST RECVRY, 200V D801
2 1DZSSHZT33TA DIODE, ZENER AXIAL 33V ZD802
2 1ICFC2N700TR 2N7000TA IC, 2N7000 Q120,Q121
1 GRLT41DS001A GR, COMMON SMD
2 0CHSS080DCTS 8PF,1608 CAPACITOR, CHIP C215.C255
2 0CHSS100DJTS CAPACITOR, CHIP Capacitor, chip 10PF,1608 C702,C703
C155,C156,C211,C213,C218
2 0CHSS101DJTS CL10C101JBNC Capacitor, chip 100PF C221,C224,C226,C229,C232
C233,C256,C857
C112,C113,C114,C115,C149
2 0CHSS102DKTS CL10B102KBNC Capacitor, chip 1000PF
C150
C192,C193,C507,C509,C511
2 0CHSS103DKTS CL10B103KBNC Capacitor, chip 0.01UF
C513,C515,C517
C191,C02,C03,C04,C05
C06,C09,C10,C107,C109
C11,C12,C120,C124,C128
C133,C136,C137,C138,C142
C147,C148,C152,C158,C159
C161,C162,C163,C166,C171
2 0CHSS104DZTS CL10F104ZANC Capacitor, chip 0.1UF
C172,C180,C181,C182,C183
C184,C186,C195,C196,C217
C236,C250,C252,C27,C28
C29,C30,C301,C31,C32
C33,C34,C35,C37,C38

2 0CHSS105DZTS CAPACITOR, CHIP 1UF,1608 C62,C65,C68

2 0CHSS150DJTS 15PF,1608 CAPACITOR, CHIP C235
2 0CHSS220DJTS CL10C220JBNC Capacitor, Chip, 22PF C07,C08
2 0CHSS222DKTS CAPACITOR, CHIP Capacitor, chip 2200PF,1608 C616,C621

PDI-P23LCD SERVICE MANUAL PAGE:43

 REPLACEMENT PART LIST
4. Parts List (Main PCB)
LEVEL PART NO PART NAME DESCRIPTIONS LOCATION NO
2 0CHSS224DZTS CAPACITOR, CHIP Capacitor, chip 0.22UF C139,C622
2 0CHSS330DJTS CL10C330JBNC Capacitor, Chip, 33PF C145,C146,C234,C94
2 0CHSS331DJTS CL10C331JBNC Capacitor, chip 330PF C153,C154
C116,C117,C118,C119,C131
2 0CHSS334DZTS CAPACITOR, CHIP Capacitor, chip,0.33UF,1608 C132,C526,C527,C528,C529
C530,C531,C532,C533
C200,C201,C205,C206,C220
2 0CHSS471DJTS CL10C471JBNC Capacitor, chip 470PF
C223,C225,C228,C230,C231
C13,C14,C15,C16,C17
2 0CHSS473DKTS CL10B473KANC Capacitor, chip 0.047UF C18,C19,C20,C21,C22
C23,C24,C25,C26
2 0DHKEKDS181S KDS181, DIODE Diode, chip KDS181 D01,D250,D251,D601,D602
2 0DHKEKDS226S KDS226, DIODE Diode, chip KDS226 D110
2 0DSSCB340ATS DIODE, SCHOTTKY CHIP B340A, 3A ZD804
2 0ICHNV8100BS IC, SDRAM CHIP 128K x 8bit, SRAM, 70ns IC105
2 0ICKE7027FTS KIA7027AF IC, KIA7027 IC104
2 0ICKE78L9FTS KIA78L09F IC, KIA78L09F IC503
2 0ICVI4925DTS IC, MOSFET CHIP DUAL P-CHANNEL 30V MOSFET IC805,IC821
L15,L16,L17,L18,L19
2 0LBSS101DJTS BEAD, CHIP 100 OHM, 2012 L20,L21,L22,L701,L702
L703
L01,L02,L03,L04,L05
2 0LBSS601FJTS BEAD, CHIP 600 OHM, 3216 L07,L08,L09,L10,L104
L11,L12,L13
L200,L201,L203,L204,L212
2 0LHSS120EJTS INDUCTOR, CHIP 12UH, 2012 L213,L214,L215,L216,L217
L218,L219,L220,L221,L222
2 0LRSL10100BS 33UH, SMD12128.5 INDUCTOR L810,L850
C135,R06,R07,R09,R10
R108,R109,R11,R110,R118
R12,R127,R128,R13,R14
R15,R152,R16,R161,R164
R165,R166,R167,R178,R179
R18,R180,R185,R188,R19
2 0RHSS000DJTS RC1608J000CS Resistor, chip 0 ohm R196,R197,R198,R199,R224
R225,R238,R239,R251,R27
R30,R40,R41,R42,R545
R548,R549,R55,R552,R66
R67,R68,R69,R700,R721
R722,R723,R833,R83,R84
R85
2 0RHSS000EJTS RC2012J000CS Resistor, chip 0 OHM R157,R602,R617,R601,R603
2 0RHSS100DJTS RC1608J100CS Resistor, chip 10 ohm R168
R08,R105,R106,R107,R130
R131,R132,R133,R135,R137
R138,R139,R140,R141,R142
R143,R145,R146,R147,R148
R149,R150,R151,R153,R162
2 0RHSS101DJTS RC1608J101CS Resistor, chip 100 ohm
R163,R17,R194,R195,R288
R289,R291,R292,R293,R294
R295,R296,R297,R298,R36
R52,R59,R60,R609,R635
R703,R711,R718,R719,R91
R117,R254,R518,R628,R631
2 0RHSS102DJTS RC1608J102CS Resistor, chip 1K
R712,R713,R717,R839
R189,R190,R232,R233,R234
R235,R236,R237,R255,R256
R278,R290,R613,R627,R629
2 0RHSS103DJTS RC1608J103CS Resistor, chip 10K
R630,R636,R704,R705,R706
R707,R72,R836,R837,R846
R841,R842,R845

PDI-P23LCD SERVICE MANUAL PAGE:44

 REPLACEMENT PART LIST
5. Parts List (Main PCB)

LEVEL PART NO PART NAME DESCRIPTIONS LOCATION NO

R620,R621,R632,R633,R637
2 0RHSS104DJTS RC1608J104CS Resistor, chip 100K
R802,R808,R821
2 0RHSS105DJTS RESISTOR, CHIP 1M OHM, 1608 J R02
2 0RHSS122DJTS RC1608J122CS Resistor, chip 1.2K R809
2 0RHSS123DJTS RESISTOR, CHIP 12K OHM, 1608 J R838
R100,R101,R102,R113,R114
2 0RHSS151DJTS RC1608J151CS Resistor, chip 150 ohm
R115
2 0RHSS153DJTS RESISTOR, CHIP 15K OHM, 1608 J R618,R623
2 0RHSS182DJTS RESISTOR, CHIP Resistor, chip 1.8K ohm R276
R04,R05,R111,R120,R129
R154,R155,R169,R170,R192
2 0RHSS220DJTS RC1608J220CS Resistor, chip 22 ohm R193,R252,R253,R32,R33
R34,R44,R50,R56,R57
R701,R702,R80,R81,R82
2 0RHSS223DJTS RC1608J223CS Resistor, chip 22K R156
2 0RHSS271DJTS RC1608J271CS Resistor,chip 270 R103,R104,R116
2 0RHSS272DJTS RC1608J272CS Resistor, chip 2.7K R112,R204
2 0RHSS273DJTS RC1608J273CS Resistor, chip 27K R260,R274,R803,R816,R818
R03,R134,R247,R248,R249
2 0RHSS332DJTS RC1608J332CS Resistor, chip 3.3K
R541,R542
2 0RHSS392DJTS RC1608J392CS Resistor, chip 3.9K R124,R125
2 0RHSS393DJTS RESISTOR, CHIP Resistor, chip 39K R619,R622
2 0RHSS3R0DJTS RESISTOR, CHIP 3 OHM, 1608 J R43
2 0RHSS3R3DJTS RC1608J3R3CS Resistor, chip 3.3 OHM R610,R611
2 0RHSS470DJTS RESISTOR, CHIP Resistor, chip 47 ohm R257,R258
2 0RHSS471DJTS RC1608J471CS Resistor, chip 470 ohm R275,R280,R519,R844
R119,R121,R122,R123,R843
R181,R182,R183,R184,R207
2 0RHSS472DJTS RC1608J472CS Resistor, chip 4.7K
R246,R26,R530,R607,R612
R709,R710,R720,R819
R126,R187,R245,R615,R626
2 0RHSS473DJTS RC1608J473CS Resistor, chip 47K
R817
2 0RHSS474DJTS RC1608J474CS Resistor, chip 470K R202,R203
R191,R200,R201,R217,R218
2 0RHSS512DJTS 5.1K OHM, 1608 J RESISTOR, CHIP
R282,R283,R284,R285
2 0RHSS560DJTS RESISTOR, CHIP 56 OHM, 1608 J R61
2 0RHSS561DJTS RC1608J561CS Resistor, chip 560 ohm R604,R608,R515,R516
2 0RHSS622DJTS 6.2K OHM, 1608 J RESISTOR, CHIP R624,R625
2 0RHSS683DJTS 68K OHM, 1608 J RESISTOR, CHIP R614
R227,R228,R279,R281,R286
2 0RHSS750DJTS RC1608J750CS Resistor, chip 75 ohm
R287,R714,R715,R716
2 0RHSS821DJTS RC1608J821CS Resistor, chip 820 ohm R277
2 0RHSS912DJTS 9.1K OHM 1608, J RESISTOR, CHIP R229
2 0RYSS101FJTS RESISTOR, ARRAY CHIP 100 OHM, 3216 AR09,AR10
2 0RYSS101FJTS RESISTOR, ARRAY CHIP 100 OHM, 3216 AR01,AR02,AR03
AR13,AR14,AR15,AR16,AR17
2 0RYSS220FJTS RESISTOR, ARRAY 22 OHM, *8 J AR18,AR19,AR21,AR22,AR23
AR24,AR25
Q100,Q101,Q103,Q601,Q203
2 0TRKE1504STS KTA1504S Y Transistor, chip A1504
Q603,Q104,Q105
Q01,Q102,Q11,Q204,Q198
2 0TRKE3875STS KTC3875S Y Transistor, chip Q205,Q210,Q602,Q604,Q800
Q802,Q803,Q812,Q813
2 1DHSTS1545GS DIODE, RECTIFIER D2PAK, 45V 15A D850
D700,D701,ZD191,ZD192,ZD202
ZD205,ZD207,ZD209,ZD213,ZD214
ZD215,ZD216,ZD217,ZD218,ZD219
2 1DZSC5231BTS DIODE, ZENER CHIP 5.1V, MMSZ5231BS-7
ZD220,ZD221,ZD222,ZD225,ZD601
ZD602,ZD702,ZD703,ZD704,ZD705
ZD706,ZD805,ZD806

PDI-P23LCD SERVICE MANUAL PAGE:45

 REPLACEMENT PART LIST
6. Parts List (Main PCB)
LEVEL PART NO PART NAME DESCRIPTIONS LOCATION NO
2 1ICIPAP120TS IC, DC/DC CONVERTER AP1501A-12K5,12V,5A IC801
2 1ICMS9883CBS MST9883C MST9883C IC04
2 1ICMST6151BS MST6151 IC, SCALER IC01
2 1ICPH74F08TS N74F08D IC, N74F08D IC702
2 1ICPH8574ATS PCF8574,REMOTE 8-BIT IC, I/O EXPANDER IC202
2 1ICRO6161FTS BA6161F IC, BA6161F IC803
2 1ICSE24C16TS S-24C16AFJA-TB IC, 24C16 IC103
2 1ICST24C02WS IC, EEPROM 24C02W IC201,IC701
2 1ICST6420DTS TEA6420D TEA6420D IC504
2 1ICST80PF55S STB80PF55 STB80PF55 Q804
2 1ICSTLD18TTS Regulator(STM) LD1117S18TR IC832
IC05,IC06,IC08
2 1ICSTLD33TTS Regulator(STM) LD1117S33TR
IC107,IC108
2 1ICSTTS482TS IC, HEADPHONE AMP TS482IST, MINI08 IC602
2 0CHSS472DKTS CAPACITOR, CHIP 4700PF,1608 C249,C257,C259
2 1ICWB986532S IC, SDRAM CHIP 512Kx32bitx4 SDRAM IC03
2 1ICMI49XYIC7 IC,V/S DECODER VCTI, 49XYI-C7 IC101
1 GRLT41CM001F GR, 201 CMO TUNER M/I
2 0TULGG083DBD TAEM-G083D Tuner
2 111-A46A 20.1",VCT-I PCB, IF
2 1SFEPX6966MD X6966M SAW FILTER SF101
2 WAFYH10200AD WAFER, PIN Pin wafer, 10-Pin P102
1 GRLT41AM001H GR, LL' MANUAL
2 1TPMU40R9MTD TRAP,40.9MHZ MKTGA40M9AAHP00A03 T101
1 GRLT41DS001G GR, LL' SMD
2 0TRKE3875STS TRANSISTOR, CHIP KTC3875S Q106
2 0RHSS472DJTS RC1608J472CS Resistor, chip 4.7K R177
1 GRLT41DM001F GR, PANEL MANUAL(LG)
2 WA1YH12200SD WAFER, PIN 12P, STRAIGHT P803
1 GRLT41DS001F GR, PANEL SMD(LG)
2 0CHSS101DJTS CL10C101JBNC Capacitor, chip 100PF C846
2 0CHSS104DZTS CL10F104ZANC Capacitor, chip 0.1UF C845,C847
2 0RHSS000DJTS RC1608J000CS Resistor, chip 0 ohm R824
2 0RHSS000EJTS RC2012J000CS Resistor, chip 0 OHM R823
2 0RHSS103DJTS RC1608J103CS Resistor, chip 10K R825
2 0RHSS473DJTS RC1608J473CS Resistor, chip 47K R826
2 WAFYH30125AS WAFER, PIN 30P, P125, ANGLE P303

PDI-P23LCD SERVICE MANUAL PAGE:46

 CIRCUIT DESCRIPTIONS
General Description for 23.01” color TFT LCD TV.

The TFT LCD TV described in the followings is based on a Multi TV system, digital
Control display, 23.01" diagonal. The TFT LCD TV is intended to be a finished product,
Basically a display device mounted inside an enclosure which will provide the safety
Requirements. With the exception of LCD Panel, the display device shall be composed
entirely of solid state components.
These components shall have a history of reliable service in identity applications
and shall be applied in the circuits.

1. SCALER SECTION.
2. VCT 49xxi SECTION.
3. Video A/D Converter

PDI-P23LCD SERVICE MANUAL PAGE:47

 CIRCUIT DESCRIPTIONS
1.SCALER SECTION.

Device : MST6151
Features: Input supports up to UXGA & 1080P
Panel supports up to SXGA/WXGA
Integrated two-port triple-ADC/PLL
Integrated DVI/HDCP compliant receiver
YUV422 digital video input ports
Dual high-quality scaling engines
Built-in 3-D video de-interlacer
Video-over-graphic PIP
Video-by-graphic split screen
MStarACE advanced picture/color processing engine
Embedded On-screen Display Controller (OSD) engine
Built-in dual-link LVDS transmitter
5-Volt tolerant inputs
Low EMI and power saving features
Supports PWM & GPO controls
208-pin PQFP package
Analog RGB/YPbPr Input Ports
DVI/HDCP Compliant Input Port
Video Input Port
Auto-Configuration/Auto-Detection
Dual High-Performance Scaling Engines
Video Processing & Conversion
On-Screen OSD Controller

1) Description
The MST6151 is a high performance and fully integrated graphics processing IC solution for
multi-function LCD monitor/TV with resolutions up to SXGA/WXGA. It is configured with an
integrated triple-ADC/PLL, an ntegrated DVI/HDCP receiver, a video de-interlacer, two high
quality scaling engines, an on-screen display controller, and a built-in output clock
generator. By use of external frame buffer, PIP is provided for multimedia applications. It
supports de-interlaced full-screen video, video-on-graphic overlay, video-by-graphic split
screen, frame rate conversion, and aspect ratio conversion for various video sources. To
further reduce system costs, the MST6151 also integrates intelligent power management
control capability for green-mode requirements and spread-spectrum support for EMI
management.

PDI-P23LCD SERVICE MANUAL PAGE:48

 CIRCUIT DESCRIPTIONS
2) Block Diagram.

PDI-P23LCD SERVICE MANUAL PAGE:49

 CIRCUIT DESCRIPTIONS
3) Pin configuration.

Reference line

The left side The right side

PDI-P23LCD SERVICE MANUAL PAGE:50

 CIRCUIT DESCRIPTIONS
3-1) Pin configuration

< The left side >

PDI-P23LCD SERVICE MANUAL PAGE:51

 CIRCUIT DESCRIPTIONS
3-2) Pin configuration

< The right side >

PDI-P23LCD SERVICE MANUAL PAGE:52

 CIRCUIT DESCRIPTIONS
4) Pin Functions.
[MCU Interface]

[Analog Interface]

PDI-P23LCD SERVICE MANUAL PAGE:53

 CIRCUIT DESCRIPTIONS

[DVI Interface]

[Video Interface]

[LVDS Interface]

PDI-P23LCD SERVICE MANUAL PAGE:54

 CIRCUIT DESCRIPTIONS

[GPO Interface]

[DRAM Interface]

PDI-P23LCD SERVICE MANUAL PAGE:55

 CIRCUIT DESCRIPTIONS
[Misc. Interface]

[Power Pins]

[No Connects]

PDI-P23LCD SERVICE MANUAL PAGE:56

 CIRCUIT DESCRIPTIONS
2. VCT 49xxi SECTION.

Device : VCT 49xxi

Features : PSSDIP88-1/-2 package
PMQFP144-2 package
Submicron CMOS technology
Low-power standby mode
Single 20.25-MHz reference crystal
8-bit 8051 instruction set compatible CPU
Up to 256 kB on-chip program ROM
WST, PDC, VPS, andWSS acquisition
Closed Caption and V-chip acquisition
Up to 10 pages on-chip teletext memory
Multi-standard QSS IF processing with single SAW
FM Radio and RDS with standard TV tuner
TV-sound demodulation:
Baseband sound processing for loudspeaker channel:
CVBS, S-VHS, YCrCb and RGB inputs
4H adaptive comb filter (PAL/NTSC)
multi-standard color decoder (PAL/NTSC/SECAM)
Nonlinear horizontal scaling “panorama vision”
Luma and chroma transient improvement (LTI, CTI)
Non-linear color space enhancement (NCE)
Dynamic black level expander (BLE)
Scan velocity modulation output
Soft start/stop of H-drive
Vertical angle and bow correction
Average and peak beam current limiter
Nonlinear and dynamic EHT compensation
Black switch off procedure (BSO)

1) Description

The VCT 49xxI is an IC family of high-quality singlechip TV processors. Modular design and
deep-submicron technology allow the economic integration of features in all classes of single-
scan TV sets. The VCT 49xxI family is based on functional blocks contained and approved in
existing products like DRX 396xA, MSP 34x5G, VSP 94x7B, DDP 3315C and SDA 55xx.
Each member of the family contains the entire IF, audio, video, display, and deflection
processing for 4:3 and 16:9 50/60-Hz mono and stereo TV sets. The integrated microcontroller
is supported by a powerful OSD generator with integrated Teletext & CC acquisition including
on-chip page memory.

PDI-P23LCD SERVICE MANUAL PAGE:57

 CIRCUIT DESCRIPTIONS
2) Block Diagram.

PDI-P23LCD SERVICE MANUAL PAGE:58

 CIRCUIT DESCRIPTIONS
3) Pin configuration.

Reference line

The left side The right side

PDI-P23LCD SERVICE MANUAL PAGE:59

 CIRCUIT DESCRIPTIONS
3-1) Pin configuration

< The left side >

PDI-P23LCD SERVICE MANUAL PAGE:60

 CIRCUIT DESCRIPTIONS
3-2) Pin configuration

< The right side >

PDI-P23LCD SERVICE MANUAL PAGE:61

 CIRCUIT DESCRIPTIONS
4) Pin Connections and Short Descriptions
NC = not connected
LV = if not used, leave vacant
OBL = obligatory; connect as described in circuit diagram
IN = Input Pin
OUT = Output Pin
SUPPLY = Supply Pin

4-1) Pin(Port) Functions

PDI-P23LCD SERVICE MANUAL PAGE:62

 CIRCUIT DESCRIPTIONS
4-2) Pin(Port) Functions

PDI-P23LCD SERVICE MANUAL PAGE:63

 CIRCUIT DESCRIPTIONS
4-3) Pin(Port) Functions

PDI-P23LCD SERVICE MANUAL PAGE:64

 CIRCUIT DESCRIPTIONS
4-4) Pin(Port) Functions

PDI-P23LCD SERVICE MANUAL PAGE:65

 CIRCUIT DESCRIPTIONS
4-5) Pin(Port) Functions

PDI-P23LCD SERVICE MANUAL PAGE:66

 CIRCUIT DESCRIPTIONS
3. Video A/D Converter

Device: MST9883CR.
Features: *Triple ADC with 12 - 140 MHz Sampling Rate
*Integrated line locked PLL generates pixel clock from HSYNC
*Integrated 5-bit pixel clock phase adjustment for precise sample timing
control
*Integrated clamp with timing generator
*Integrated Brightness & Contrast controls
*Integrated precision voltage reference
*Compatible with VGA through SXGA RGB graphics signals, and component
TV, DTV and HDTV
*Pin Compatible with AD9883A
*Serial port programming interface
*Mid-Scale Clamping
*Fully Sync Processing
*4:2:2 and 4:4:4 Output Format Mode
*Color space conversion (RGB to YCbCr)
*Internal pattern generator*
*Sawtooth vertical deflection signals for VSYNC input*
*BT656 output format mode*
*Black and mid-level precision clamp and calibration*
*Please see MST9883C Application Note for details.RGB Graphics
Processing
(A/D Converter).

1) Description
Most flat-panel monitors and projectors require a digital graphics input in order to accurately
scale and display
graphics. The huge installed base of computers with analog video graphics interfaces
necessitates the use of a
graphics digitizer to re-digitize the analog RGB signal before further processing.
■The MST9883CR is a fully integrated analog interface for digitizing high-resolution RGB
graphics signals from PC’s and workstations. With a sampling rate capability of up to 140
MHz, it can accurately support display resolutions up to 1280x1024 (SXGA) at 75 Hz. The
clamped input circuits provide sufficient band width to accurately digitize each pixel.
■The MST9883CR provides a high performance highly integrated solution to support the
digitization process, including the ADC’s, a voltage reference, a PLL to generate the pixel
sampling clock from HSYNC, clamping circuits, and programmable offset and gain
circuits to provide brightness and contrast controls.
■When the COAST signal is asserted, the PLL will maintain its output frequency when
HSYNC pulses are absent, such as during the VSYNC period in some systems.
■A 32-step programmable phase adjustment control (0-360 deg) is provided for the pixel
sampling clock to adjust for the difference between the HSYNC edge and RGB pixel edge timing.
■The MST9883CR can send output data through one 24-bit port at the pixel clock rate.
■The MST9883CR can also support RGB to YCbCr conversion.
■The MST9883CR has internal programmable pattern generator for testing.
■The MST9883CR can accept either standard TTL, CMOS levels or sawtooth vertical
deflection signals for VSYNC input.

PDI-P23LCD SERVICE MANUAL PAGE:67

 CIRCUIT DESCRIPTIONS
2) Block Diagram.

PDI-P23LCD SERVICE MANUAL PAGE:68

 CIRCUIT DESCRIPTIONS
3) Pin configuration.

PDI-P23LCD SERVICE MANUAL PAGE:69

 CIRCUIT DESCRIPTIONS
4-1) Analog Interface

4-2) Misc. Interface

PDI-P23LCD SERVICE MANUAL PAGE:70

 CIRCUIT DESCRIPTIONS
4-3) Output Interface

4-4) Power Pins

PDI-P23LCD SERVICE MANUAL PAGE:71